#include <linux/sockios.h>
#include <linux/version.h>
#include <fcntl.h>
+#include <stdalign.h>
-/* DPDK headers don't like -pedantic. */
-#ifdef PEDANTIC
-#pragma GCC diagnostic ignored "-Wpedantic"
-#endif
#include <rte_atomic.h>
#include <rte_ethdev.h>
#include <rte_mbuf.h>
#include <rte_interrupts.h>
#include <rte_alarm.h>
#include <rte_malloc.h>
-#ifdef PEDANTIC
-#pragma GCC diagnostic error "-Wpedantic"
-#endif
#include "mlx5.h"
#include "mlx5_rxtx.h"
struct priv *
mlx5_get_priv(struct rte_eth_dev *dev)
{
- struct mlx5_secondary_data *sd;
-
- if (!mlx5_is_secondary())
- return dev->data->dev_private;
- sd = &mlx5_secondary_data[dev->data->port_id];
- return sd->data.dev_private;
+ return dev->data->dev_private;
}
/**
inline int
mlx5_is_secondary(void)
{
- return rte_eal_process_type() != RTE_PROC_PRIMARY;
+ return rte_eal_process_type() == RTE_PROC_SECONDARY;
}
/**
unsigned int max;
char ifname[IF_NAMESIZE];
- info->pci_dev = RTE_DEV_TO_PCI(dev->device);
+ info->pci_dev = RTE_ETH_DEV_TO_PCI(dev);
priv_lock(priv);
/* FIXME: we should ask the device for these values. */
{
static const uint32_t ptypes[] = {
/* refers to rxq_cq_to_pkt_type() */
+ RTE_PTYPE_L2_ETHER,
RTE_PTYPE_L3_IPV4_EXT_UNKNOWN,
RTE_PTYPE_L3_IPV6_EXT_UNKNOWN,
+ RTE_PTYPE_L4_NONFRAG,
+ RTE_PTYPE_L4_FRAG,
+ RTE_PTYPE_L4_TCP,
+ RTE_PTYPE_L4_UDP,
RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN,
RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN,
+ RTE_PTYPE_INNER_L4_NONFRAG,
+ RTE_PTYPE_INNER_L4_FRAG,
+ RTE_PTYPE_INNER_L4_TCP,
+ RTE_PTYPE_INNER_L4_UDP,
RTE_PTYPE_UNKNOWN
-
};
- if (dev->rx_pkt_burst == mlx5_rx_burst)
+ if (dev->rx_pkt_burst == mlx5_rx_burst ||
+ dev->rx_pkt_burst == mlx5_rx_burst_vec)
return ptypes;
return NULL;
}
mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev, int wait_to_complete)
{
struct priv *priv = mlx5_get_priv(dev);
- struct ethtool_link_settings edata = {
- .cmd = ETHTOOL_GLINKSETTINGS,
- };
+ struct ethtool_link_settings gcmd = { .cmd = ETHTOOL_GLINKSETTINGS };
struct ifreq ifr;
struct rte_eth_link dev_link;
uint64_t sc;
memset(&dev_link, 0, sizeof(dev_link));
dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
(ifr.ifr_flags & IFF_RUNNING));
- ifr.ifr_data = (void *)&edata;
+ ifr.ifr_data = (void *)&gcmd;
if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
DEBUG("ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS) failed: %s",
strerror(errno));
return -1;
}
- dev_link.link_speed = edata.speed;
- sc = edata.link_mode_masks[0] |
- ((uint64_t)edata.link_mode_masks[1] << 32);
+ gcmd.link_mode_masks_nwords = -gcmd.link_mode_masks_nwords;
+
+ alignas(struct ethtool_link_settings)
+ uint8_t data[offsetof(struct ethtool_link_settings, link_mode_masks) +
+ sizeof(uint32_t) * gcmd.link_mode_masks_nwords * 3];
+ struct ethtool_link_settings *ecmd = (void *)data;
+
+ *ecmd = gcmd;
+ ifr.ifr_data = (void *)ecmd;
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ DEBUG("ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS) failed: %s",
+ strerror(errno));
+ return -1;
+ }
+ dev_link.link_speed = ecmd->speed;
+ sc = ecmd->link_mode_masks[0] |
+ ((uint64_t)ecmd->link_mode_masks[1] << 32);
priv->link_speed_capa = 0;
if (sc & ETHTOOL_LINK_MODE_Autoneg_BIT)
priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG;
ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT |
ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT))
priv->link_speed_capa |= ETH_LINK_SPEED_100G;
- dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ?
+ dev_link.link_duplex = ((ecmd->duplex == DUPLEX_HALF) ?
ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
ETH_LINK_SPEED_FIXED);
/**
* DPDK callback to change the MTU.
*
- * Setting the MTU affects hardware MRU (packets larger than the MTU cannot be
- * received). Use this as a hint to enable/disable scattered packets support
- * and improve performance when not needed.
- * Since failure is not an option, reconfiguring queues on the fly is not
- * recommended.
- *
* @param dev
* Pointer to Ethernet device structure.
* @param in_mtu
mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
{
struct priv *priv = dev->data->dev_private;
+ uint16_t kern_mtu;
int ret = 0;
- unsigned int i;
- uint16_t (*rx_func)(void *, struct rte_mbuf **, uint16_t) =
- mlx5_rx_burst;
- unsigned int max_frame_len;
- int rehash;
- int restart = priv->started;
if (mlx5_is_secondary())
return -E_RTE_SECONDARY;
priv_lock(priv);
+ ret = priv_get_mtu(priv, &kern_mtu);
+ if (ret)
+ goto out;
/* Set kernel interface MTU first. */
- if (priv_set_mtu(priv, mtu)) {
- ret = errno;
- WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
- strerror(ret));
+ ret = priv_set_mtu(priv, mtu);
+ if (ret)
goto out;
- } else
+ ret = priv_get_mtu(priv, &kern_mtu);
+ if (ret)
+ goto out;
+ if (kern_mtu == mtu) {
+ priv->mtu = mtu;
DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
- /* Temporarily replace RX handler with a fake one, assuming it has not
- * been copied elsewhere. */
- dev->rx_pkt_burst = removed_rx_burst;
- /* Make sure everyone has left mlx5_rx_burst() and uses
- * removed_rx_burst() instead. */
- rte_wmb();
- usleep(1000);
- /* MTU does not include header and CRC. */
- max_frame_len = ETHER_HDR_LEN + mtu + ETHER_CRC_LEN;
- /* Check if at least one queue is going to need a SGE update. */
- for (i = 0; i != priv->rxqs_n; ++i) {
- struct rxq *rxq = (*priv->rxqs)[i];
- unsigned int mb_len;
- unsigned int size = RTE_PKTMBUF_HEADROOM + max_frame_len;
- unsigned int sges_n;
-
- if (rxq == NULL)
- continue;
- mb_len = rte_pktmbuf_data_room_size(rxq->mp);
- assert(mb_len >= RTE_PKTMBUF_HEADROOM);
- /*
- * Determine the number of SGEs needed for a full packet
- * and round it to the next power of two.
- */
- sges_n = log2above((size / mb_len) + !!(size % mb_len));
- if (sges_n != rxq->sges_n)
- break;
- }
- /*
- * If all queues have the right number of SGEs, a simple rehash
- * of their buffers is enough, otherwise SGE information can only
- * be updated in a queue by recreating it. All resources that depend
- * on queues (flows, indirection tables) must be recreated as well in
- * that case.
- */
- rehash = (i == priv->rxqs_n);
- if (!rehash) {
- /* Clean up everything as with mlx5_dev_stop(). */
- priv_special_flow_disable_all(priv);
- priv_mac_addrs_disable(priv);
- priv_destroy_hash_rxqs(priv);
- priv_fdir_disable(priv);
- priv_dev_interrupt_handler_uninstall(priv, dev);
}
-recover:
- /* Reconfigure each RX queue. */
- for (i = 0; (i != priv->rxqs_n); ++i) {
- struct rxq *rxq = (*priv->rxqs)[i];
- struct rxq_ctrl *rxq_ctrl =
- container_of(rxq, struct rxq_ctrl, rxq);
- unsigned int mb_len;
- unsigned int tmp;
-
- if (rxq == NULL)
- continue;
- mb_len = rte_pktmbuf_data_room_size(rxq->mp);
- assert(mb_len >= RTE_PKTMBUF_HEADROOM);
- /* Provide new values to rxq_setup(). */
- dev->data->dev_conf.rxmode.jumbo_frame =
- (max_frame_len > ETHER_MAX_LEN);
- dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame_len;
- if (rehash)
- ret = rxq_rehash(dev, rxq_ctrl);
- else
- ret = rxq_ctrl_setup(dev, rxq_ctrl, 1 << rxq->elts_n,
- rxq_ctrl->socket, NULL, rxq->mp);
- if (!ret)
- continue;
- /* Attempt to roll back in case of error. */
- tmp = (mb_len << rxq->sges_n) - RTE_PKTMBUF_HEADROOM;
- if (max_frame_len != tmp) {
- max_frame_len = tmp;
- goto recover;
- }
- /* Double fault, disable RX. */
- break;
- }
- /*
- * Use a safe RX burst function in case of error, otherwise mimic
- * mlx5_dev_start().
- */
- if (ret) {
- ERROR("unable to reconfigure RX queues, RX disabled");
- rx_func = removed_rx_burst;
- } else if (restart &&
- !rehash &&
- !priv_create_hash_rxqs(priv) &&
- !priv_rehash_flows(priv)) {
- if (dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_NONE)
- priv_fdir_enable(priv);
- priv_dev_interrupt_handler_install(priv, dev);
- }
- priv->mtu = mtu;
- /* Burst functions can now be called again. */
- rte_wmb();
- dev->rx_pkt_burst = rx_func;
+ priv_unlock(priv);
+ return 0;
out:
+ ret = errno;
+ WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
+ strerror(ret));
priv_unlock(priv);
assert(ret >= 0);
return -ret;
/* Extract information. */
if (sscanf(line,
"PCI_SLOT_NAME="
- "%" SCNx16 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
+ "%" SCNx32 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
&pci_addr->domain,
&pci_addr->bus,
&pci_addr->devid,
ret = priv_dev_link_status_handler(priv, dev);
priv_unlock(priv);
if (ret)
- _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL,
+ NULL);
}
/**
ret = priv_dev_link_status_handler(priv, dev);
priv_unlock(priv);
if (ret)
- _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL,
+ NULL);
}
/**
return err;
}
-/**
- * Configure secondary process queues from a private data pointer (primary
- * or secondary) and update burst callbacks. Can take place only once.
- *
- * All queues must have been previously created by the primary process to
- * avoid undefined behavior.
- *
- * @param priv
- * Private data pointer from either primary or secondary process.
- *
- * @return
- * Private data pointer from secondary process, NULL in case of error.
- */
-struct priv *
-mlx5_secondary_data_setup(struct priv *priv)
-{
- unsigned int port_id = 0;
- struct mlx5_secondary_data *sd;
- void **tx_queues;
- void **rx_queues;
- unsigned int nb_tx_queues;
- unsigned int nb_rx_queues;
- unsigned int i;
-
- /* priv must be valid at this point. */
- assert(priv != NULL);
- /* priv->dev must also be valid but may point to local memory from
- * another process, possibly with the same address and must not
- * be dereferenced yet. */
- assert(priv->dev != NULL);
- /* Determine port ID by finding out where priv comes from. */
- while (1) {
- sd = &mlx5_secondary_data[port_id];
- rte_spinlock_lock(&sd->lock);
- /* Primary process? */
- if (sd->primary_priv == priv)
- break;
- /* Secondary process? */
- if (sd->data.dev_private == priv)
- break;
- rte_spinlock_unlock(&sd->lock);
- if (++port_id == RTE_DIM(mlx5_secondary_data))
- port_id = 0;
- }
- /* Switch to secondary private structure. If private data has already
- * been updated by another thread, there is nothing else to do. */
- priv = sd->data.dev_private;
- if (priv->dev->data == &sd->data)
- goto end;
- /* Sanity checks. Secondary private structure is supposed to point
- * to local eth_dev, itself still pointing to the shared device data
- * structure allocated by the primary process. */
- assert(sd->shared_dev_data != &sd->data);
- assert(sd->data.nb_tx_queues == 0);
- assert(sd->data.tx_queues == NULL);
- assert(sd->data.nb_rx_queues == 0);
- assert(sd->data.rx_queues == NULL);
- assert(priv != sd->primary_priv);
- assert(priv->dev->data == sd->shared_dev_data);
- assert(priv->txqs_n == 0);
- assert(priv->txqs == NULL);
- assert(priv->rxqs_n == 0);
- assert(priv->rxqs == NULL);
- nb_tx_queues = sd->shared_dev_data->nb_tx_queues;
- nb_rx_queues = sd->shared_dev_data->nb_rx_queues;
- /* Allocate local storage for queues. */
- tx_queues = rte_zmalloc("secondary ethdev->tx_queues",
- sizeof(sd->data.tx_queues[0]) * nb_tx_queues,
- RTE_CACHE_LINE_SIZE);
- rx_queues = rte_zmalloc("secondary ethdev->rx_queues",
- sizeof(sd->data.rx_queues[0]) * nb_rx_queues,
- RTE_CACHE_LINE_SIZE);
- if (tx_queues == NULL || rx_queues == NULL)
- goto error;
- /* Lock to prevent control operations during setup. */
- priv_lock(priv);
- /* TX queues. */
- for (i = 0; i != nb_tx_queues; ++i) {
- struct txq *primary_txq = (*sd->primary_priv->txqs)[i];
- struct txq_ctrl *primary_txq_ctrl;
- struct txq_ctrl *txq_ctrl;
-
- if (primary_txq == NULL)
- continue;
- primary_txq_ctrl = container_of(primary_txq,
- struct txq_ctrl, txq);
- txq_ctrl = rte_calloc_socket("TXQ", 1, sizeof(*txq_ctrl) +
- (1 << primary_txq->elts_n) *
- sizeof(struct rte_mbuf *), 0,
- primary_txq_ctrl->socket);
- if (txq_ctrl != NULL) {
- if (txq_ctrl_setup(priv->dev,
- txq_ctrl,
- 1 << primary_txq->elts_n,
- primary_txq_ctrl->socket,
- NULL) == 0) {
- txq_ctrl->txq.stats.idx =
- primary_txq->stats.idx;
- tx_queues[i] = &txq_ctrl->txq;
- continue;
- }
- rte_free(txq_ctrl);
- }
- while (i) {
- txq_ctrl = tx_queues[--i];
- txq_cleanup(txq_ctrl);
- rte_free(txq_ctrl);
- }
- goto error;
- }
- /* RX queues. */
- for (i = 0; i != nb_rx_queues; ++i) {
- struct rxq_ctrl *primary_rxq =
- container_of((*sd->primary_priv->rxqs)[i],
- struct rxq_ctrl, rxq);
-
- if (primary_rxq == NULL)
- continue;
- /* Not supported yet. */
- rx_queues[i] = NULL;
- }
- /* Update everything. */
- priv->txqs = (void *)tx_queues;
- priv->txqs_n = nb_tx_queues;
- priv->rxqs = (void *)rx_queues;
- priv->rxqs_n = nb_rx_queues;
- sd->data.rx_queues = rx_queues;
- sd->data.tx_queues = tx_queues;
- sd->data.nb_rx_queues = nb_rx_queues;
- sd->data.nb_tx_queues = nb_tx_queues;
- sd->data.dev_link = sd->shared_dev_data->dev_link;
- sd->data.mtu = sd->shared_dev_data->mtu;
- memcpy(sd->data.rx_queue_state, sd->shared_dev_data->rx_queue_state,
- sizeof(sd->data.rx_queue_state));
- memcpy(sd->data.tx_queue_state, sd->shared_dev_data->tx_queue_state,
- sizeof(sd->data.tx_queue_state));
- sd->data.dev_flags = sd->shared_dev_data->dev_flags;
- /* Use local data from now on. */
- rte_mb();
- priv->dev->data = &sd->data;
- rte_mb();
- priv_select_tx_function(priv);
- priv_select_rx_function(priv);
- priv_unlock(priv);
-end:
- /* More sanity checks. */
- assert(priv->dev->data == &sd->data);
- rte_spinlock_unlock(&sd->lock);
- return priv;
-error:
- priv_unlock(priv);
- rte_free(tx_queues);
- rte_free(rx_queues);
- rte_spinlock_unlock(&sd->lock);
- return NULL;
-}
-
/**
* Configure the TX function to use.
*
priv->dev->tx_pkt_burst = mlx5_tx_burst;
/* Select appropriate TX function. */
if (priv->mps == MLX5_MPW_ENHANCED) {
- priv->dev->tx_pkt_burst =
- mlx5_tx_burst_empw;
- DEBUG("selected Enhanced MPW TX function");
+ if (priv_check_vec_tx_support(priv) > 0) {
+ if (priv_check_raw_vec_tx_support(priv) > 0)
+ priv->dev->tx_pkt_burst = mlx5_tx_burst_raw_vec;
+ else
+ priv->dev->tx_pkt_burst = mlx5_tx_burst_vec;
+ DEBUG("selected Enhanced MPW TX vectorized function");
+ } else {
+ priv->dev->tx_pkt_burst = mlx5_tx_burst_empw;
+ DEBUG("selected Enhanced MPW TX function");
+ }
} else if (priv->mps && priv->txq_inline) {
priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw_inline;
DEBUG("selected MPW inline TX function");
void
priv_select_rx_function(struct priv *priv)
{
- priv->dev->rx_pkt_burst = mlx5_rx_burst;
+ if (priv_check_vec_rx_support(priv) > 0) {
+ priv->dev->rx_pkt_burst = mlx5_rx_burst_vec;
+ DEBUG("selected RX vectorized function");
+ } else {
+ priv->dev->rx_pkt_burst = mlx5_rx_burst;
+ }
}
git.droids-corp.org / dpdk.git / blobdiff