#include <string.h>
#include <unistd.h>
-/* Verbs header. */
-/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
-#ifdef PEDANTIC
-#pragma GCC diagnostic ignored "-Wpedantic"
-#endif
-#include <infiniband/verbs.h>
-#ifdef PEDANTIC
-#pragma GCC diagnostic error "-Wpedantic"
-#endif
-
#include <rte_common.h>
#include <rte_ether.h>
#include <rte_ethdev_driver.h>
#include <rte_gre.h>
#include <rte_vxlan.h>
#include <rte_gtp.h>
+#include <rte_eal_paging.h>
+#include <mlx5_glue.h>
#include <mlx5_devx_cmds.h>
#include <mlx5_prm.h>
+#include <mlx5_malloc.h>
#include "mlx5_defs.h"
#include "mlx5.h"
RTE_FLOW_ERROR_TYPE_ACTION, action,
"no support for multiple VLAN "
"actions");
- if (!(item_flags & MLX5_FLOW_LAYER_OUTER_VLAN))
+ /* Pop VLAN with preceding Decap requires inner header with VLAN. */
+ if ((action_flags & MLX5_FLOW_ACTION_DECAP) &&
+ !(item_flags & MLX5_FLOW_LAYER_INNER_VLAN))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "cannot pop vlan after decap without "
+ "match on inner vlan in the flow");
+ /* Pop VLAN without preceding Decap requires outer header with VLAN. */
+ if (!(action_flags & MLX5_FLOW_ACTION_DECAP) &&
+ !(item_flags & MLX5_FLOW_LAYER_OUTER_VLAN))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
const struct rte_flow_action_of_push_vlan *push_vlan = action->conf;
const struct mlx5_priv *priv = dev->data->dev_private;
- if (!attr->transfer && attr->ingress)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
- NULL,
- "push VLAN action not supported for "
- "ingress");
if (push_vlan->ethertype != RTE_BE16(RTE_ETHER_TYPE_VLAN) &&
push_vlan->ethertype != RTE_BE16(RTE_ETHER_TYPE_QINQ))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"invalid vlan ethertype");
- if (action_flags & MLX5_FLOW_VLAN_ACTIONS)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION, action,
- "no support for multiple VLAN "
- "actions");
if (action_flags & MLX5_FLOW_ACTION_PORT_ID)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
{
const struct mlx5_priv *priv = dev->data->dev_private;
+ if (priv->config.hca_attr.scatter_fcs_w_decap_disable &&
+ !priv->config.decap_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "decap is not enabled");
if (action_flags & MLX5_FLOW_XCAP_ACTIONS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
(sh->ctx, domain, cache_resource,
&cache_resource->action);
if (ret) {
- rte_free(cache_resource);
+ mlx5_free(cache_resource);
return rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot create action");
(priv->sh->fdb_domain, resource->port_id,
&cache_resource->action);
if (ret) {
- rte_free(cache_resource);
+ mlx5_free(cache_resource);
return rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot create action");
(domain, resource->vlan_tag,
&cache_resource->action);
if (ret) {
- rte_free(cache_resource);
+ mlx5_free(cache_resource);
return rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot create action");
}
}
/* Register new modify-header resource. */
- cache_resource = rte_calloc(__func__, 1,
- sizeof(*cache_resource) + actions_len, 0);
+ cache_resource = mlx5_malloc(MLX5_MEM_ZERO,
+ sizeof(*cache_resource) + actions_len, 0,
+ SOCKET_ID_ANY);
if (!cache_resource)
return rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
(sh->ctx, ns, cache_resource,
actions_len, &cache_resource->action);
if (ret) {
- rte_free(cache_resource);
+ mlx5_free(cache_resource);
return rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot create action");
MLX5_COUNTERS_PER_POOL +
sizeof(struct mlx5_counter_stats_raw)) * raws_n +
sizeof(struct mlx5_counter_stats_mem_mng);
- uint8_t *mem = rte_calloc(__func__, 1, size, sysconf(_SC_PAGESIZE));
+ size_t pgsize = rte_mem_page_size();
+ if (pgsize == (size_t)-1) {
+ DRV_LOG(ERR, "Failed to get mem page size");
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ uint8_t *mem = mlx5_malloc(MLX5_MEM_ZERO, size, pgsize,
+ SOCKET_ID_ANY);
int i;
if (!mem) {
IBV_ACCESS_LOCAL_WRITE);
if (!mem_mng->umem) {
rte_errno = errno;
- rte_free(mem);
+ mlx5_free(mem);
return NULL;
}
mkey_attr.addr = (uintptr_t)mem;
if (!mem_mng->dm) {
mlx5_glue->devx_umem_dereg(mem_mng->umem);
rte_errno = errno;
- rte_free(mem);
+ mlx5_free(mem);
return NULL;
}
mem_mng->raws = (struct mlx5_counter_stats_raw *)(mem + size);
void *old_pools = cont->pools;
uint32_t resize = cont->n + MLX5_CNT_CONTAINER_RESIZE;
uint32_t mem_size = sizeof(struct mlx5_flow_counter_pool *) * resize;
- void *pools = rte_calloc(__func__, 1, mem_size, 0);
+ void *pools = mlx5_malloc(MLX5_MEM_ZERO, mem_size, 0, SOCKET_ID_ANY);
if (!pools) {
rte_errno = ENOMEM;
mem_mng = flow_dv_create_counter_stat_mem_mng(dev,
MLX5_CNT_CONTAINER_RESIZE + MLX5_MAX_PENDING_QUERIES);
if (!mem_mng) {
- rte_free(pools);
+ mlx5_free(pools);
return -ENOMEM;
}
for (i = 0; i < MLX5_MAX_PENDING_QUERIES; ++i)
cont->pools = pools;
rte_spinlock_unlock(&cont->resize_sl);
if (old_pools)
- rte_free(old_pools);
+ mlx5_free(old_pools);
return 0;
}
size += MLX5_COUNTERS_PER_POOL * CNT_SIZE;
size += (batch ? 0 : MLX5_COUNTERS_PER_POOL * CNTEXT_SIZE);
size += (!age ? 0 : MLX5_COUNTERS_PER_POOL * AGE_SIZE);
- pool = rte_calloc(__func__, 1, size, 0);
+ pool = mlx5_malloc(MLX5_MEM_ZERO, size, 0, SOCKET_ID_ANY);
if (!pool) {
rte_errno = ENOMEM;
return NULL;
actions,
"no fate action is found");
}
- /* Continue validation for Xcap actions.*/
- if ((action_flags & MLX5_FLOW_XCAP_ACTIONS) && (queue_index == 0xFFFF ||
- mlx5_rxq_get_type(dev, queue_index) != MLX5_RXQ_TYPE_HAIRPIN)) {
+ /* Continue validation for Xcap and VLAN actions.*/
+ if ((action_flags & (MLX5_FLOW_XCAP_ACTIONS |
+ MLX5_FLOW_VLAN_ACTIONS)) &&
+ (queue_index == 0xFFFF ||
+ mlx5_rxq_get_type(dev, queue_index) != MLX5_RXQ_TYPE_HAIRPIN)) {
if ((action_flags & MLX5_FLOW_XCAP_ACTIONS) ==
MLX5_FLOW_XCAP_ACTIONS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "encap and decap "
"combination aren't supported");
- if (!attr->transfer && attr->ingress && (action_flags &
- MLX5_FLOW_ACTION_ENCAP))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- NULL, "encap is not supported"
- " for ingress traffic");
+ if (!attr->transfer && attr->ingress) {
+ if (action_flags & MLX5_FLOW_ACTION_ENCAP)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "encap is not supported"
+ " for ingress traffic");
+ else if (action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "push VLAN action not "
+ "supported for ingress");
+ else if ((action_flags & MLX5_FLOW_VLAN_ACTIONS) ==
+ MLX5_FLOW_VLAN_ACTIONS)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no support for "
+ "multiple VLAN actions");
+ }
}
/* Hairpin flow will add one more TAG action. */
if (hairpin > 0)
dev_flow = &((struct mlx5_flow *)priv->inter_flows)[priv->flow_idx++];
dev_flow->handle = dev_handle;
dev_flow->handle_idx = handle_idx;
- dev_flow->dv.value.size = MLX5_ST_SZ_BYTES(fte_match_param);
+ /*
+ * In some old rdma-core releases, before continuing, a check of the
+ * length of matching parameter will be done at first. It needs to use
+ * the length without misc4 param. If the flow has misc4 support, then
+ * the length needs to be adjusted accordingly. Each param member is
+ * aligned with a 64B boundary naturally.
+ */
+ dev_flow->dv.value.size = MLX5_ST_SZ_BYTES(fte_match_param) -
+ MLX5_ST_SZ_BYTES(fte_match_set_misc4);
/*
* The matching value needs to be cleared to 0 before using. In the
* past, it will be automatically cleared when using rte_*alloc
rte_be_to_cpu_32(gtp_v->teid & gtp_m->teid));
}
+/**
+ * Add eCPRI item to matcher and to the value.
+ *
+ * @param[in] dev
+ * The devich to configure through.
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] samples
+ * Sample IDs to be used in the matching.
+ */
+static void
+flow_dv_translate_item_ecpri(struct rte_eth_dev *dev, void *matcher,
+ void *key, const struct rte_flow_item *item)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_item_ecpri *ecpri_m = item->mask;
+ const struct rte_flow_item_ecpri *ecpri_v = item->spec;
+ void *misc4_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ misc_parameters_4);
+ void *misc4_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_4);
+ uint32_t *samples;
+ void *dw_m;
+ void *dw_v;
+
+ if (!ecpri_v)
+ return;
+ if (!ecpri_m)
+ ecpri_m = &rte_flow_item_ecpri_mask;
+ /*
+ * Maximal four DW samples are supported in a single matching now.
+ * Two are used now for a eCPRI matching:
+ * 1. Type: one byte, mask should be 0x00ff0000 in network order
+ * 2. ID of a message: one or two bytes, mask 0xffff0000 or 0xff000000
+ * if any.
+ */
+ if (!ecpri_m->hdr.common.u32)
+ return;
+ samples = priv->sh->fp[MLX5_FLEX_PARSER_ECPRI_0].ids;
+ /* Need to take the whole DW as the mask to fill the entry. */
+ dw_m = MLX5_ADDR_OF(fte_match_set_misc4, misc4_m,
+ prog_sample_field_value_0);
+ dw_v = MLX5_ADDR_OF(fte_match_set_misc4, misc4_v,
+ prog_sample_field_value_0);
+ /* Already big endian (network order) in the header. */
+ *(uint32_t *)dw_m = ecpri_m->hdr.common.u32;
+ *(uint32_t *)dw_v = ecpri_v->hdr.common.u32;
+ /* Sample#0, used for matching type, offset 0. */
+ MLX5_SET(fte_match_set_misc4, misc4_m,
+ prog_sample_field_id_0, samples[0]);
+ /* It makes no sense to set the sample ID in the mask field. */
+ MLX5_SET(fte_match_set_misc4, misc4_v,
+ prog_sample_field_id_0, samples[0]);
+ /*
+ * Checking if message body part needs to be matched.
+ * Some wildcard rules only matching type field should be supported.
+ */
+ if (ecpri_m->hdr.dummy[0]) {
+ switch (ecpri_v->hdr.common.type) {
+ case RTE_ECPRI_MSG_TYPE_IQ_DATA:
+ case RTE_ECPRI_MSG_TYPE_RTC_CTRL:
+ case RTE_ECPRI_MSG_TYPE_DLY_MSR:
+ dw_m = MLX5_ADDR_OF(fte_match_set_misc4, misc4_m,
+ prog_sample_field_value_1);
+ dw_v = MLX5_ADDR_OF(fte_match_set_misc4, misc4_v,
+ prog_sample_field_value_1);
+ *(uint32_t *)dw_m = ecpri_m->hdr.dummy[0];
+ *(uint32_t *)dw_v = ecpri_v->hdr.dummy[0];
+ /* Sample#1, to match message body, offset 4. */
+ MLX5_SET(fte_match_set_misc4, misc4_m,
+ prog_sample_field_id_1, samples[1]);
+ MLX5_SET(fte_match_set_misc4, misc4_v,
+ prog_sample_field_id_1, samples[1]);
+ break;
+ default:
+ /* Others, do not match any sample ID. */
+ break;
+ }
+ }
+}
+
static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
#define HEADER_IS_ZERO(match_criteria, headers) \
match_criteria_enable |=
(!HEADER_IS_ZERO(match_criteria, misc_parameters_3)) <<
MLX5_MATCH_CRITERIA_ENABLE_MISC3_BIT;
+ match_criteria_enable |=
+ (!HEADER_IS_ZERO(match_criteria, misc_parameters_4)) <<
+ MLX5_MATCH_CRITERIA_ENABLE_MISC4_BIT;
return match_criteria_enable;
}
}
}
/* Register new matcher. */
- cache_matcher = rte_calloc(__func__, 1, sizeof(*cache_matcher), 0);
+ cache_matcher = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*cache_matcher), 0,
+ SOCKET_ID_ANY);
if (!cache_matcher) {
flow_dv_tbl_resource_release(dev, tbl);
return rte_flow_error_set(error, ENOMEM,
ret = mlx5_flow_os_create_flow_matcher(sh->ctx, &dv_attr, tbl->obj,
&cache_matcher->matcher_object);
if (ret) {
- rte_free(cache_matcher);
+ mlx5_free(cache_matcher);
#ifdef HAVE_MLX5DV_DR
flow_dv_tbl_resource_release(dev, tbl);
#endif
ret = mlx5_flow_os_create_flow_action_tag(tag_be24,
&cache_resource->action);
if (ret) {
- rte_free(cache_resource);
+ mlx5_free(cache_resource);
return rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot create action");
rte_atomic32_inc(&cache_resource->refcnt);
if (mlx5_hlist_insert(sh->tag_table, &cache_resource->entry)) {
mlx5_flow_os_destroy_flow_action(cache_resource->action);
- rte_free(cache_resource);
+ mlx5_free(cache_resource);
return rte_flow_error_set(error, EEXIST,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot insert tag");
uint64_t priority = attr->priority;
struct mlx5_flow_dv_matcher matcher = {
.mask = {
- .size = sizeof(matcher.mask.buf),
+ .size = sizeof(matcher.mask.buf) -
+ MLX5_ST_SZ_BYTES(fte_match_set_misc4),
},
};
int actions_n = 0;
case RTE_FLOW_ITEM_TYPE_GRE:
flow_dv_translate_item_gre(match_mask, match_value,
items, tunnel);
- matcher.priority = rss_desc->level >= 2 ?
- MLX5_PRIORITY_MAP_L2 : MLX5_PRIORITY_MAP_L4;
+ matcher.priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
last_item = MLX5_FLOW_LAYER_GRE;
break;
case RTE_FLOW_ITEM_TYPE_GRE_KEY:
case RTE_FLOW_ITEM_TYPE_NVGRE:
flow_dv_translate_item_nvgre(match_mask, match_value,
items, tunnel);
- matcher.priority = rss_desc->level >= 2 ?
- MLX5_PRIORITY_MAP_L2 : MLX5_PRIORITY_MAP_L4;
+ matcher.priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
last_item = MLX5_FLOW_LAYER_GRE;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN:
flow_dv_translate_item_vxlan(match_mask, match_value,
items, tunnel);
- matcher.priority = rss_desc->level >= 2 ?
- MLX5_PRIORITY_MAP_L2 : MLX5_PRIORITY_MAP_L4;
+ matcher.priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
last_item = MLX5_FLOW_LAYER_VXLAN;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
flow_dv_translate_item_vxlan_gpe(match_mask,
match_value, items,
tunnel);
- matcher.priority = rss_desc->level >= 2 ?
- MLX5_PRIORITY_MAP_L2 : MLX5_PRIORITY_MAP_L4;
+ matcher.priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
last_item = MLX5_FLOW_LAYER_VXLAN_GPE;
break;
case RTE_FLOW_ITEM_TYPE_GENEVE:
flow_dv_translate_item_geneve(match_mask, match_value,
items, tunnel);
- matcher.priority = rss_desc->level >= 2 ?
- MLX5_PRIORITY_MAP_L2 : MLX5_PRIORITY_MAP_L4;
+ matcher.priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
last_item = MLX5_FLOW_LAYER_GENEVE;
break;
case RTE_FLOW_ITEM_TYPE_MPLS:
flow_dv_translate_item_mpls(match_mask, match_value,
items, last_item, tunnel);
- matcher.priority = rss_desc->level >= 2 ?
- MLX5_PRIORITY_MAP_L2 : MLX5_PRIORITY_MAP_L4;
+ matcher.priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
last_item = MLX5_FLOW_LAYER_MPLS;
break;
case RTE_FLOW_ITEM_TYPE_MARK:
case RTE_FLOW_ITEM_TYPE_GTP:
flow_dv_translate_item_gtp(match_mask, match_value,
items, tunnel);
- matcher.priority = rss_desc->level >= 2 ?
- MLX5_PRIORITY_MAP_L2 : MLX5_PRIORITY_MAP_L4;
+ matcher.priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
last_item = MLX5_FLOW_LAYER_GTP;
break;
+ case RTE_FLOW_ITEM_TYPE_ECPRI:
+ if (!mlx5_flex_parser_ecpri_exist(dev)) {
+ /* Create it only the first time to be used. */
+ ret = mlx5_flex_parser_ecpri_alloc(dev);
+ if (ret)
+ return rte_flow_error_set
+ (error, -ret,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL,
+ "cannot create eCPRI parser");
+ }
+ /* Adjust the length matcher and device flow value. */
+ matcher.mask.size = MLX5_ST_SZ_BYTES(fte_match_param);
+ dev_flow->dv.value.size =
+ MLX5_ST_SZ_BYTES(fte_match_param);
+ flow_dv_translate_item_ecpri(dev, match_mask,
+ match_value, items);
+ /* No other protocol should follow eCPRI layer. */
+ last_item = MLX5_FLOW_LAYER_ECPRI;
+ break;
default:
break;
}
LIST_REMOVE(matcher, next);
/* table ref-- in release interface. */
flow_dv_tbl_resource_release(dev, matcher->tbl);
- rte_free(matcher);
+ mlx5_free(matcher);
DRV_LOG(DEBUG, "port %u matcher %p: removed",
dev->data->port_id, (void *)matcher);
return 0;
claim_zero(mlx5_flow_os_destroy_flow_action
(cache_resource->action));
LIST_REMOVE(cache_resource, next);
- rte_free(cache_resource);
+ mlx5_free(cache_resource);
DRV_LOG(DEBUG, "modify-header resource %p: removed",
(void *)cache_resource);
return 0;
flow_dv_tbl_resource_release(dev, mtd->transfer.sfx_tbl);
if (mtd->drop_actn)
claim_zero(mlx5_flow_os_destroy_flow_action(mtd->drop_actn));
- rte_free(mtd);
+ mlx5_free(mtd);
return 0;
}
rte_errno = ENOTSUP;
return NULL;
}
- mtb = rte_calloc(__func__, 1, sizeof(*mtb), 0);
+ mtb = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*mtb), 0, SOCKET_ID_ANY);
if (!mtb) {
DRV_LOG(ERR, "Failed to allocate memory for meter.");
return NULL;
git.droids-corp.org / dpdk.git / blobdiff