#include <rte_branch_prediction.h>
#include <rte_ether.h>
#include <rte_cycles.h>
+#include <rte_flow.h>
#include "mlx5.h"
#include "mlx5_utils.h"
#define MLX5_TXOFF_CONFIG_VLAN (1u << 5) /* VLAN insertion supported.*/
#define MLX5_TXOFF_CONFIG_METADATA (1u << 6) /* Flow metadata. */
#define MLX5_TXOFF_CONFIG_EMPW (1u << 8) /* Enhanced MPW supported.*/
+#define MLX5_TXOFF_CONFIG_MPW (1u << 9) /* Legacy MPW supported.*/
/* The most common offloads groups. */
#define MLX5_TXOFF_CONFIG_NONE 0
MKSTR(path, "%s/%s", MLX5_SYSTEM_LOG_DIR, fname);
fd = fopen(path, "a+");
if (!fd) {
- DRV_LOG(WARNING, "cannot open %s for debug dump\n",
- path);
+ DRV_LOG(WARNING, "cannot open %s for debug dump", path);
MKSTR(path2, "./%s", fname);
fd = fopen(path2, "a+");
if (!fd) {
- DRV_LOG(ERR, "cannot open %s for debug dump\n",
- path2);
+ DRV_LOG(ERR, "cannot open %s for debug dump", path2);
return;
}
- DRV_LOG(INFO, "New debug dump in file %s\n", path2);
+ DRV_LOG(INFO, "New debug dump in file %s", path2);
} else {
- DRV_LOG(INFO, "New debug dump in file %s\n", path);
+ DRV_LOG(INFO, "New debug dump in file %s", path);
}
if (hex_title)
rte_hexdump(fd, hex_title, buf, hex_len);
&rq_attr);
}
if (ret) {
- DRV_LOG(ERR, "Cannot change Rx WQ state to %u - %s\n",
+ DRV_LOG(ERR, "Cannot change Rx WQ state to %u - %s",
sm->state, strerror(errno));
rte_errno = errno;
return ret;
.qp_state = IBV_QPS_RESET,
.port_num = (uint8_t)priv->ibv_port,
};
- struct ibv_qp *qp = txq_ctrl->ibv->qp;
+ struct ibv_qp *qp = txq_ctrl->obj->qp;
ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
if (ret) {
DRV_LOG(ERR, "Cannot change the Tx QP state to RESET "
- "%s\n", strerror(errno));
+ "%s", strerror(errno));
rte_errno = errno;
return ret;
}
ret = mlx5_glue->modify_qp(qp, &mod,
(IBV_QP_STATE | IBV_QP_PORT));
if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s\n",
+ DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s",
strerror(errno));
rte_errno = errno;
return ret;
mod.qp_state = IBV_QPS_RTR;
ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s\n",
+ DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s",
strerror(errno));
rte_errno = errno;
return ret;
mod.qp_state = IBV_QPS_RTS;
ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s\n",
+ DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s",
strerror(errno));
rte_errno = errno;
return ret;
pkt->hash.fdir.hi = mlx5_flow_mark_get(mark);
}
}
+ if (rte_flow_dynf_metadata_avail() && cqe->flow_table_metadata) {
+ pkt->ol_flags |= PKT_RX_DYNF_METADATA;
+ *RTE_FLOW_DYNF_METADATA(pkt) = cqe->flow_table_metadata;
+ }
if (rxq->csum)
pkt->ol_flags |= rxq_cq_to_ol_flags(cqe);
if (rxq->vlan_strip &&
{
struct mlx5_wqe_cseg *restrict cs = &wqe->cseg;
+ /* For legacy MPW replace the EMPW by TSO with modifier. */
+ if (MLX5_TXOFF_CONFIG(MPW) && opcode == MLX5_OPCODE_ENHANCED_MPSW)
+ opcode = MLX5_OPCODE_TSO | MLX5_OPC_MOD_MPW << 24;
cs->opcode = rte_cpu_to_be_32((txq->wqe_ci << 8) | opcode);
cs->sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
cs->flags = RTE_BE32(MLX5_COMP_ONLY_FIRST_ERR <<
es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
/* Fill metadata field if needed. */
es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_METADATA ?
- loc->mbuf->tx_metadata : 0 : 0;
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
/* Engage VLAN tag insertion feature if requested. */
if (MLX5_TXOFF_CONFIG(VLAN) &&
loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
/* Fill metadata field if needed. */
es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_METADATA ?
- loc->mbuf->tx_metadata : 0 : 0;
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
(sizeof(uint16_t) +
sizeof(rte_v128u32_t)),
es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
/* Fill metadata field if needed. */
es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_METADATA ?
- loc->mbuf->tx_metadata : 0 : 0;
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
(sizeof(uint16_t) +
sizeof(rte_v128u32_t)),
es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
/* Fill metadata field if needed. */
es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_METADATA ?
- loc->mbuf->tx_metadata : 0 : 0;
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
(sizeof(uint16_t) +
sizeof(rte_v128u32_t)),
/* Unrolled implementation of generic rte_memcpy. */
dst = (uintptr_t)&dseg->inline_data[0];
src = (uintptr_t)buf;
+ if (len & 0x08) {
#ifdef RTE_ARCH_STRICT_ALIGN
- memcpy(dst, src, len);
+ assert(dst == RTE_PTR_ALIGN(dst, sizeof(uint32_t)));
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
+ dst += sizeof(uint32_t);
+ src += sizeof(uint32_t);
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
+ dst += sizeof(uint32_t);
+ src += sizeof(uint32_t);
#else
- if (len & 0x08) {
- *(uint64_t *)dst = *(uint64_t *)src;
+ *(uint64_t *)dst = *(unaligned_uint64_t *)src;
dst += sizeof(uint64_t);
src += sizeof(uint64_t);
+#endif
}
if (len & 0x04) {
- *(uint32_t *)dst = *(uint32_t *)src;
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
dst += sizeof(uint32_t);
src += sizeof(uint32_t);
}
if (len & 0x02) {
- *(uint16_t *)dst = *(uint16_t *)src;
+ *(uint16_t *)dst = *(unaligned_uint16_t *)src;
dst += sizeof(uint16_t);
src += sizeof(uint16_t);
}
if (len & 0x01)
*(uint8_t *)dst = *(uint8_t *)src;
-#endif
}
/**
/**
* Check the next packet attributes to match with the eMPW batch ones.
+ * In addition, for legacy MPW the packet length is checked either.
*
* @param txq
* Pointer to TX queue structure.
* Pointer to Ethernet Segment of eMPW batch.
* @param loc
* Pointer to burst routine local context.
+ * @param dlen
+ * Length of previous packet in MPW descriptor.
* @param olx
* Configured Tx offloads mask. It is fully defined at
* compile time and may be used for optimization.
mlx5_tx_match_empw(struct mlx5_txq_data *restrict txq __rte_unused,
struct mlx5_wqe_eseg *restrict es,
struct mlx5_txq_local *restrict loc,
+ uint32_t dlen,
unsigned int olx)
{
uint8_t swp_flags = 0;
return false;
/* Fill metadata field if needed. */
if (MLX5_TXOFF_CONFIG(METADATA) &&
- es->metadata != (loc->mbuf->ol_flags & PKT_TX_METADATA ?
- loc->mbuf->tx_metadata : 0))
+ es->metadata != (loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0))
+ return false;
+ /* Legacy MPW can send packets with the same lengt only. */
+ if (MLX5_TXOFF_CONFIG(MPW) &&
+ dlen != rte_pktmbuf_data_len(loc->mbuf))
return false;
/* There must be no VLAN packets in eMPW loop. */
if (MLX5_TXOFF_CONFIG(VLAN))
unsigned int slen = 0;
next_empw:
- part = RTE_MIN(pkts_n, MLX5_EMPW_MAX_PACKETS);
+ assert(NB_SEGS(loc->mbuf) == 1);
+ part = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
+ MLX5_MPW_MAX_PACKETS :
+ MLX5_EMPW_MAX_PACKETS);
if (unlikely(loc->elts_free < part)) {
/* We have no enough elts to save all mbufs. */
if (unlikely(loc->elts_free < MLX5_EMPW_MIN_PACKETS))
eseg = &loc->wqe_last->eseg;
dseg = &loc->wqe_last->dseg[0];
loop = part;
+ /* Store the packet length for legacy MPW. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ eseg->mss = rte_cpu_to_be_16
+ (rte_pktmbuf_data_len(loc->mbuf));
for (;;) {
uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
#ifdef MLX5_PMD_SOFT_COUNTERS
return MLX5_TXCMP_CODE_EXIT;
return MLX5_TXCMP_CODE_MULTI;
}
+ assert(NB_SEGS(loc->mbuf) == 1);
if (ret == MLX5_TXCMP_CODE_TSO) {
part -= loop;
mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
* - check sum settings
* - metadata value
* - software parser settings
+ * - packets length (legacy MPW only)
*/
- if (!mlx5_tx_match_empw(txq, eseg, loc, olx)) {
+ if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx)) {
assert(loop);
part -= loop;
mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
unsigned int room, part, nlim;
unsigned int slen = 0;
+ assert(NB_SEGS(loc->mbuf) == 1);
/*
* Limits the amount of packets in one WQE
* to improve CQE latency generation.
*/
- nlim = RTE_MIN(pkts_n, MLX5_EMPW_MAX_PACKETS);
+ nlim = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
+ MLX5_MPW_INLINE_MAX_PACKETS :
+ MLX5_EMPW_MAX_PACKETS);
/* Check whether we have minimal amount WQEs */
if (unlikely(loc->wqe_free <
((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
olx & ~MLX5_TXOFF_CONFIG_VLAN);
eseg = &loc->wqe_last->eseg;
dseg = &loc->wqe_last->dseg[0];
+ /* Store the packet length for legacy MPW. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ eseg->mss = rte_cpu_to_be_16
+ (rte_pktmbuf_data_len(loc->mbuf));
room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
loc->wqe_free) * MLX5_WQE_SIZE -
MLX5_WQE_CSEG_SIZE -
return MLX5_TXCMP_CODE_EXIT;
return MLX5_TXCMP_CODE_MULTI;
}
+ assert(NB_SEGS(loc->mbuf) == 1);
if (ret == MLX5_TXCMP_CODE_TSO) {
part -= room;
mlx5_tx_idone_empw(txq, loc, part, slen, olx);
* - check sum settings
* - metadata value
* - software parser settings
+ * - packets length (legacy MPW only)
*/
- if (!mlx5_tx_match_empw(txq, eseg, loc, olx))
+ if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx))
break;
/* Packet attributes match, continue the same eMPW. */
if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
* free the packet immediately.
*/
rte_pktmbuf_free_seg(loc->mbuf);
- } else if (!MLX5_TXOFF_CONFIG(EMPW) &&
- txq->inlen_mode) {
+ } else if ((!MLX5_TXOFF_CONFIG(EMPW) ||
+ MLX5_TXOFF_CONFIG(MPW)) &&
+ txq->inlen_mode) {
/*
* If minimal inlining is requested the eMPW
* feature should be disabled due to data is
* to improve latencies. The pure software related data treatment
* can be completed after doorbell. Tx CQEs for this SQ are
* processed in this thread only by the polling.
+ *
+ * The rdma core library can map doorbell register in two ways,
+ * depending on the environment variable "MLX5_SHUT_UP_BF":
+ *
+ * - as regular cached memory, the variable is either missing or
+ * set to zero. This type of mapping may cause the significant
+ * doorbell register writing latency and requires explicit
+ * memory write barrier to mitigate this issue and prevent
+ * write combining.
+ *
+ * - as non-cached memory, the variable is present and set to
+ * not "0" value. This type of mapping may cause performance
+ * impact under heavy loading conditions but the explicit write
+ * memory barrier is not required and it may improve core
+ * performance.
+ *
+ * - the legacy behaviour (prior 19.08 release) was to use some
+ * heuristics to decide whether write memory barrier should
+ * be performed. This behavior is supported with specifying
+ * tx_db_nc=2, write barrier is skipped if application
+ * provides the full recommended burst of packets, it
+ * supposes the next packets are coming and the write barrier
+ * will be issued on the next burst (after descriptor writing,
+ * at least).
*/
- mlx5_tx_dbrec_cond_wmb(txq, loc.wqe_last, 0);
+ mlx5_tx_dbrec_cond_wmb(txq, loc.wqe_last, !txq->db_nc &&
+ (!txq->db_heu || pkts_n % MLX5_TX_DEFAULT_BURST));
/* Not all of the mbufs may be stored into elts yet. */
part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent - loc.pkts_copy;
if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
MLX5_TXOFF_CONFIG_METADATA)
+/*
+ * Generate routines with Legacy Multi-Packet Write support.
+ * This mode is supported by ConnectX-4LX only and imposes
+ * offload limitations, not supported:
+ * - ACL/Flows (metadata are becoming meaningless)
+ * - WQE Inline headers
+ * - SRIOV (E-Switch offloads)
+ * - VLAN insertion
+ * - tunnel encapsulation/decapsulation
+ * - TSO
+ */
+MLX5_TXOFF_DECL(none_mpw,
+ MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_DECL(mci_mpw,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_DECL(mc_mpw,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_EMPW | MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_DECL(i_mpw,
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
+
/*
* Array of declared and compiled Tx burst function and corresponding
* supported offloads set. The array is used to select the Tx burst
MLX5_TXOFF_CONFIG_INLINE |
MLX5_TXOFF_CONFIG_METADATA)
-
MLX5_TXOFF_INFO(mtv,
MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
MLX5_TXOFF_CONFIG_VLAN |
MLX5_TXOFF_INFO(iv,
MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
MLX5_TXOFF_CONFIG_METADATA)
+
+MLX5_TXOFF_INFO(none_mpw,
+ MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_INFO(mci_mpw,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_INFO(mc_mpw,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_EMPW | MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_INFO(i_mpw,
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
};
/**
if (config->mps == MLX5_MPW_ENHANCED &&
config->txq_inline_min <= 0) {
/*
- * The NIC supports Enhanced Multi-Packet Write.
- * We do not support legacy MPW due to its
- * hardware related problems, so we just ignore
- * legacy MLX5_MPW settings. There should be no
- * minimal required inline data.
+ * The NIC supports Enhanced Multi-Packet Write
+ * and does not require minimal inline data.
*/
olx |= MLX5_TXOFF_CONFIG_EMPW;
}
- if (tx_offloads & DEV_TX_OFFLOAD_MATCH_METADATA) {
+ if (rte_flow_dynf_metadata_avail()) {
/* We should support Flow metadata. */
olx |= MLX5_TXOFF_CONFIG_METADATA;
}
+ if (config->mps == MLX5_MPW) {
+ /*
+ * The NIC supports Legacy Multi-Packet Write.
+ * The MLX5_TXOFF_CONFIG_MPW controls the
+ * descriptor building method in combination
+ * with MLX5_TXOFF_CONFIG_EMPW.
+ */
+ if (!(olx & (MLX5_TXOFF_CONFIG_TSO |
+ MLX5_TXOFF_CONFIG_SWP |
+ MLX5_TXOFF_CONFIG_VLAN |
+ MLX5_TXOFF_CONFIG_METADATA)))
+ olx |= MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW;
+ }
/*
* Scan the routines table to find the minimal
* satisfying routine with requested offloads.
DRV_LOG(DEBUG, "\tVLANI (VLAN insertion)");
if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_METADATA)
DRV_LOG(DEBUG, "\tMETAD (tx Flow metadata)");
- if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_EMPW)
- DRV_LOG(DEBUG, "\tEMPW (Enhanced MPW)");
+ if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_EMPW) {
+ if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_MPW)
+ DRV_LOG(DEBUG, "\tMPW (Legacy MPW)");
+ else
+ DRV_LOG(DEBUG, "\tEMPW (Enhanced MPW)");
+ }
return txoff_func[m].func;
}
git.droids-corp.org / dpdk.git / blobdiff