#pragma GCC diagnostic ignored "-Wpedantic"
#endif
#include <infiniband/verbs.h>
+#include <infiniband/mlx5dv.h>
#ifdef PEDANTIC
#pragma GCC diagnostic error "-Wpedantic"
#endif
offloads |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM;
if (config->tso)
offloads |= (DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
- DEV_TX_OFFLOAD_GRE_TNL_TSO);
+ DEV_TX_OFFLOAD_GRE_TNL_TSO |
+ DEV_TX_OFFLOAD_GENEVE_TNL_TSO);
}
-#ifdef HAVE_IBV_FLOW_DV_SUPPORT
- if (config->dv_flow_en)
- offloads |= DEV_TX_OFFLOAD_MATCH_METADATA;
-#endif
return offloads;
}
/**
- * DPDK callback to configure a TX queue.
+ * Tx queue presetup checks.
*
* @param dev
* Pointer to Ethernet device structure.
* @param idx
- * TX queue index.
+ * Tx queue index.
* @param desc
* Number of descriptors to configure in queue.
- * @param socket
- * NUMA socket on which memory must be allocated.
- * @param[in] conf
- * Thresholds parameters.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-int
-mlx5_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
- unsigned int socket, const struct rte_eth_txconf *conf)
+static int
+mlx5_tx_queue_pre_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc)
{
struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_txq_data *txq = (*priv->txqs)[idx];
- struct mlx5_txq_ctrl *txq_ctrl =
- container_of(txq, struct mlx5_txq_ctrl, txq);
if (desc <= MLX5_TX_COMP_THRESH) {
DRV_LOG(WARNING,
return -rte_errno;
}
mlx5_txq_release(dev, idx);
+ return 0;
+}
+/**
+ * DPDK callback to configure a TX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int res;
+
+ res = mlx5_tx_queue_pre_setup(dev, idx, desc);
+ if (res)
+ return res;
txq_ctrl = mlx5_txq_new(dev, idx, desc, socket, conf);
if (!txq_ctrl) {
DRV_LOG(ERR, "port %u unable to allocate queue index %u",
return 0;
}
+/**
+ * DPDK callback to configure a TX hairpin queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param[in] hairpin_conf
+ * The hairpin binding configuration.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_hairpin_queue_setup(struct rte_eth_dev *dev, uint16_t idx,
+ uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int res;
+
+ res = mlx5_tx_queue_pre_setup(dev, idx, desc);
+ if (res)
+ return res;
+ if (hairpin_conf->peer_count != 1 ||
+ hairpin_conf->peers[0].port != dev->data->port_id ||
+ hairpin_conf->peers[0].queue >= priv->rxqs_n) {
+ DRV_LOG(ERR, "port %u unable to setup hairpin queue index %u "
+ " invalid hairpind configuration", dev->data->port_id,
+ idx);
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ txq_ctrl = mlx5_txq_hairpin_new(dev, idx, desc, hairpin_conf);
+ if (!txq_ctrl) {
+ DRV_LOG(ERR, "port %u unable to allocate queue index %u",
+ dev->data->port_id, idx);
+ return -rte_errno;
+ }
+ DRV_LOG(DEBUG, "port %u adding Tx queue %u to list",
+ dev->data->port_id, idx);
+ (*priv->txqs)[idx] = &txq_ctrl->txq;
+ txq_ctrl->type = MLX5_TXQ_TYPE_HAIRPIN;
+ return 0;
+}
+
/**
* DPDK callback to release a TX queue.
*
}
}
+/**
+ * Configure the doorbell register non-cached attribute.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ * @param page_size
+ * Systme page size
+ */
+static void
+txq_uar_ncattr_init(struct mlx5_txq_ctrl *txq_ctrl, size_t page_size)
+{
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ unsigned int cmd;
+
+ txq_ctrl->txq.db_heu = priv->config.dbnc == MLX5_TXDB_HEURISTIC;
+ txq_ctrl->txq.db_nc = 0;
+ /* Check the doorbell register mapping type. */
+ cmd = txq_ctrl->uar_mmap_offset / page_size;
+ cmd >>= MLX5_UAR_MMAP_CMD_SHIFT;
+ cmd &= MLX5_UAR_MMAP_CMD_MASK;
+ if (cmd == MLX5_MMAP_GET_NC_PAGES_CMD)
+ txq_ctrl->txq.db_nc = 1;
+}
+
/**
* Initialize Tx UAR registers for primary process.
*
{
struct mlx5_priv *priv = txq_ctrl->priv;
struct mlx5_proc_priv *ppriv = MLX5_PROC_PRIV(PORT_ID(priv));
+ const size_t page_size = sysconf(_SC_PAGESIZE);
#ifndef RTE_ARCH_64
unsigned int lock_idx;
- const size_t page_size = sysconf(_SC_PAGESIZE);
#endif
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ return;
assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
assert(ppriv);
ppriv->uar_table[txq_ctrl->txq.idx] = txq_ctrl->bf_reg;
+ txq_uar_ncattr_init(txq_ctrl, page_size);
#ifndef RTE_ARCH_64
/* Assign an UAR lock according to UAR page number */
lock_idx = (txq_ctrl->uar_mmap_offset / page_size) &
uintptr_t offset;
const size_t page_size = sysconf(_SC_PAGESIZE);
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ return 0;
assert(ppriv);
/*
* As rdma-core, UARs are mapped in size of OS page
}
addr = RTE_PTR_ADD(addr, offset);
ppriv->uar_table[txq->idx] = addr;
+ txq_uar_ncattr_init(txq_ctrl, page_size);
return 0;
}
const size_t page_size = sysconf(_SC_PAGESIZE);
void *addr;
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ return;
addr = ppriv->uar_table[txq_ctrl->txq.idx];
munmap(RTE_PTR_ALIGN_FLOOR(addr, page_size), page_size);
}
continue;
txq = (*priv->txqs)[i];
txq_ctrl = container_of(txq, struct mlx5_txq_ctrl, txq);
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ continue;
assert(txq->idx == (uint16_t)i);
ret = txq_uar_init_secondary(txq_ctrl, fd);
if (ret)
return -rte_errno;
}
+/**
+ * Create the Tx hairpin queue object.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * Queue index in DPDK Tx queue array
+ *
+ * @return
+ * The hairpin DevX object initialised, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_txq_obj *
+mlx5_txq_obj_hairpin_new(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq_data, struct mlx5_txq_ctrl, txq);
+ struct mlx5_devx_create_sq_attr attr = { 0 };
+ struct mlx5_txq_obj *tmpl = NULL;
+ int ret = 0;
+
+ assert(txq_data);
+ assert(!txq_ctrl->obj);
+ tmpl = rte_calloc_socket(__func__, 1, sizeof(*tmpl), 0,
+ txq_ctrl->socket);
+ if (!tmpl) {
+ DRV_LOG(ERR,
+ "port %u Tx queue %u cannot allocate memory resources",
+ dev->data->port_id, txq_data->idx);
+ rte_errno = ENOMEM;
+ goto error;
+ }
+ tmpl->type = MLX5_TXQ_OBJ_TYPE_DEVX_HAIRPIN;
+ tmpl->txq_ctrl = txq_ctrl;
+ attr.hairpin = 1;
+ attr.tis_lst_sz = 1;
+ /* Workaround for hairpin startup */
+ attr.wq_attr.log_hairpin_num_packets = log2above(32);
+ /* Workaround for packets larger than 1KB */
+ attr.wq_attr.log_hairpin_data_sz =
+ priv->config.hca_attr.log_max_hairpin_wq_data_sz;
+ attr.tis_num = priv->sh->tis->id;
+ tmpl->sq = mlx5_devx_cmd_create_sq(priv->sh->ctx, &attr);
+ if (!tmpl->sq) {
+ DRV_LOG(ERR,
+ "port %u tx hairpin queue %u can't create sq object",
+ dev->data->port_id, idx);
+ rte_errno = errno;
+ goto error;
+ }
+ DRV_LOG(DEBUG, "port %u sxq %u updated with %p", dev->data->port_id,
+ idx, (void *)&tmpl);
+ rte_atomic32_inc(&tmpl->refcnt);
+ LIST_INSERT_HEAD(&priv->txqsobj, tmpl, next);
+ return tmpl;
+error:
+ ret = rte_errno; /* Save rte_errno before cleanup. */
+ if (tmpl->tis)
+ mlx5_devx_cmd_destroy(tmpl->tis);
+ if (tmpl->sq)
+ mlx5_devx_cmd_destroy(tmpl->sq);
+ rte_errno = ret; /* Restore rte_errno. */
+ return NULL;
+}
+
/**
* Create the Tx queue Verbs object.
*
* Pointer to Ethernet device.
* @param idx
* Queue index in DPDK Tx queue array.
+ * @param type
+ * Type of the Tx queue object to create.
*
* @return
* The Verbs object initialised, NULL otherwise and rte_errno is set.
*/
struct mlx5_txq_obj *
-mlx5_txq_obj_new(struct rte_eth_dev *dev, uint16_t idx)
+mlx5_txq_obj_new(struct rte_eth_dev *dev, uint16_t idx,
+ enum mlx5_txq_obj_type type)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
const int desc = 1 << txq_data->elts_n;
int ret = 0;
+ if (type == MLX5_TXQ_OBJ_TYPE_DEVX_HAIRPIN)
+ return mlx5_txq_obj_hairpin_new(dev, idx);
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
/* If using DevX, need additional mask to read tisn value. */
if (priv->config.devx && !priv->sh->tdn)
{
assert(txq_obj);
if (rte_atomic32_dec_and_test(&txq_obj->refcnt)) {
- claim_zero(mlx5_glue->destroy_qp(txq_obj->qp));
- claim_zero(mlx5_glue->destroy_cq(txq_obj->cq));
+ if (txq_obj->type == MLX5_TXQ_OBJ_TYPE_DEVX_HAIRPIN) {
+ if (txq_obj->tis)
+ claim_zero(mlx5_devx_cmd_destroy(txq_obj->tis));
+ } else {
+ claim_zero(mlx5_glue->destroy_qp(txq_obj->qp));
+ claim_zero(mlx5_glue->destroy_cq(txq_obj->cq));
+ }
LIST_REMOVE(txq_obj, next);
rte_free(txq_obj);
return 0;
(unsigned int)config->txq_inline_mpw;
inlen_mode = (config->txq_inline_min == MLX5_ARG_UNSET) ?
0 : (unsigned int)config->txq_inline_min;
- if (config->mps != MLX5_MPW_ENHANCED)
+ if (config->mps != MLX5_MPW_ENHANCED && config->mps != MLX5_MPW)
inlen_empw = 0;
/*
* If there is requested minimal amount of data to inline
assert(txq_ctrl->max_inline_data <= max_inline);
assert(txq_ctrl->txq.inlen_mode <= max_inline);
assert(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_send);
- assert(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_empw);
+ assert(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_empw ||
+ !txq_ctrl->txq.inlen_empw);
return 0;
error:
rte_errno = ENOMEM;
goto error;
}
rte_atomic32_inc(&tmpl->refcnt);
+ tmpl->type = MLX5_TXQ_TYPE_STANDARD;
LIST_INSERT_HEAD(&priv->txqsctrl, tmpl, next);
return tmpl;
error:
return NULL;
}
+/**
+ * Create a DPDK Tx hairpin queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param hairpin_conf
+ * The hairpin configuration.
+ *
+ * @return
+ * A DPDK queue object on success, NULL otherwise and rte_errno is set.
+ */
+struct mlx5_txq_ctrl *
+mlx5_txq_hairpin_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *tmpl;
+
+ tmpl = rte_calloc_socket("TXQ", 1,
+ sizeof(*tmpl), 0, SOCKET_ID_ANY);
+ if (!tmpl) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ tmpl->priv = priv;
+ tmpl->socket = SOCKET_ID_ANY;
+ tmpl->txq.elts_n = log2above(desc);
+ tmpl->txq.port_id = dev->data->port_id;
+ tmpl->txq.idx = idx;
+ tmpl->hairpin_conf = *hairpin_conf;
+ tmpl->type = MLX5_TXQ_TYPE_HAIRPIN;
+ rte_atomic32_inc(&tmpl->refcnt);
+ LIST_INSERT_HEAD(&priv->txqsctrl, tmpl, next);
+ return tmpl;
+}
+
/**
* Get a Tx queue.
*
git.droids-corp.org / dpdk.git / blobdiff