/*
- * Copyright (c) 2014, 2015 Netronome Systems, Inc.
+ * Copyright (c) 2014-2018 Netronome Systems, Inc.
* All rights reserved.
*
* Small portions derived from code Copyright(c) 2010-2015 Intel Corporation.
#include <rte_alarm.h>
#include <rte_spinlock.h>
-#include "nfp_nfpu.h"
+#include "nfpcore/nfp_cpp.h"
+#include "nfpcore/nfp_nffw.h"
+#include "nfpcore/nfp_hwinfo.h"
+#include "nfpcore/nfp_mip.h"
+#include "nfpcore/nfp_rtsym.h"
+#include "nfpcore/nfp_nsp.h"
+
#include "nfp_net_pmd.h"
#include "nfp_net_logs.h"
#include "nfp_net_ctrl.h"
static int nfp_net_rss_hash_write(struct rte_eth_dev *dev,
struct rte_eth_rss_conf *rss_conf);
-/*
- * The offset of the queue controller queues in the PCIe Target. These
- * happen to be at the same offset on the NFP6000 and the NFP3200 so
- * we use a single macro here.
- */
-#define NFP_PCIE_QUEUE(_q) (0x800 * ((_q) & 0xff))
+/* The offset of the queue controller queues in the PCIe Target */
+#define NFP_PCIE_QUEUE(_q) (0x80000 + (NFP_QCP_QUEUE_ADDR_SZ * ((_q) & 0xff)))
/* Maximum value which can be added to a queue with one transaction */
#define NFP_QCP_MAX_ADD 0x7f
#define ETH_ADDR_LEN 6
static void
-nfp_eth_copy_mac_reverse(uint8_t *dst, const uint8_t *src)
+nfp_eth_copy_mac(uint8_t *dst, const uint8_t *src)
{
int i;
for (i = 0; i < ETH_ADDR_LEN; i++)
- dst[ETH_ADDR_LEN - i - 1] = src[i];
+ dst[i] = src[i];
}
static int
nfp_net_pf_read_mac(struct nfp_net_hw *hw, int port)
{
- union eth_table_entry *entry;
- int idx, i;
-
- idx = port;
- entry = hw->eth_table;
-
- /* Reading NFP ethernet table obtained before */
- for (i = 0; i < NSP_ETH_MAX_COUNT; i++) {
- if (!(entry->port & NSP_ETH_PORT_LANES_MASK)) {
- /* port not in use */
- entry++;
- continue;
- }
- if (idx == 0)
- break;
- idx--;
- entry++;
- }
-
- if (i == NSP_ETH_MAX_COUNT)
- return -EINVAL;
+ struct nfp_eth_table *nfp_eth_table;
+ nfp_eth_table = nfp_eth_read_ports(hw->cpp);
/*
* hw points to port0 private data. We need hw now pointing to
* right port.
*/
hw += port;
- nfp_eth_copy_mac_reverse((uint8_t *)&hw->mac_addr,
- (uint8_t *)&entry->mac_addr);
+ nfp_eth_copy_mac((uint8_t *)&hw->mac_addr,
+ (uint8_t *)&nfp_eth_table->ports[port].mac_addr);
+ free(nfp_eth_table);
return 0;
}
if (hw->is_pf)
/* Configure the physical port up */
- nfp_nsp_eth_config(hw->nspu_desc, hw->pf_port_idx, 1);
+ nfp_eth_set_configured(hw->cpp, hw->pf_port_idx, 1);
hw->ctrl = new_ctrl;
if (hw->is_pf)
/* Configure the physical port down */
- nfp_nsp_eth_config(hw->nspu_desc, hw->pf_port_idx, 0);
+ nfp_eth_set_configured(hw->cpp, hw->pf_port_idx, 0);
}
/* Reset and stop device. The device can not be restarted. */
uint64_t tx_bar_off = 0, rx_bar_off = 0;
uint32_t start_q;
int stride = 4;
-
- nspu_desc_t *nspu_desc = NULL;
- uint64_t bar_offset;
int port = 0;
+ int err;
PMD_INIT_FUNC_TRACE();
/* This points to the specific port private data */
hw = &hwport0[port];
- hw->pf_port_idx = port;
} else {
hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
hwport0 = 0;
}
if (hw->is_pf && port == 0) {
- nspu_desc = hw->nspu_desc;
-
- if (nfp_nsp_map_ctrl_bar(nspu_desc, &bar_offset) != 0) {
- /*
- * A firmware should be there after PF probe so this
- * should not happen.
- */
- RTE_LOG(ERR, PMD, "PF BAR symbol resolution failed\n");
- return -ENODEV;
+ hw->ctrl_bar = nfp_rtsym_map(hw->sym_tbl, "_pf0_net_bar0",
+ hw->total_ports * 32768,
+ &hw->ctrl_area);
+ if (!hw->ctrl_bar) {
+ printf("nfp_rtsym_map fails for _pf0_net_ctrl_bar\n");
+ return -EIO;
}
- /* vNIC PF control BAR is a subset of PF PCI device BAR */
- hw->ctrl_bar += bar_offset;
PMD_INIT_LOG(DEBUG, "ctrl bar: %p\n", hw->ctrl_bar);
}
case PCI_DEVICE_ID_NFP6000_PF_NIC:
case PCI_DEVICE_ID_NFP6000_VF_NIC:
start_q = nn_cfg_readl(hw, NFP_NET_CFG_START_TXQ);
- tx_bar_off = NFP_PCIE_QUEUE(start_q);
+ tx_bar_off = start_q * NFP_QCP_QUEUE_ADDR_SZ;
start_q = nn_cfg_readl(hw, NFP_NET_CFG_START_RXQ);
- rx_bar_off = NFP_PCIE_QUEUE(start_q);
+ rx_bar_off = start_q * NFP_QCP_QUEUE_ADDR_SZ;
break;
default:
RTE_LOG(ERR, PMD, "nfp_net: no device ID matching\n");
- return -ENODEV;
+ err = -ENODEV;
+ goto dev_err_ctrl_map;
}
PMD_INIT_LOG(DEBUG, "tx_bar_off: 0x%" PRIx64 "\n", tx_bar_off);
if (hw->is_pf && port == 0) {
/* configure access to tx/rx vNIC BARs */
- nfp_nsp_map_queues_bar(nspu_desc, &bar_offset);
- PMD_INIT_LOG(DEBUG, "tx/rx bar_offset: %" PRIx64 "\n",
- bar_offset);
- hwport0->hw_queues = (uint8_t *)pci_dev->mem_resource[0].addr;
-
- /* vNIC PF tx/rx BARs are a subset of PF PCI device */
- hwport0->hw_queues += bar_offset;
+ hwport0->hw_queues = nfp_cpp_map_area(hw->cpp, 0, 0,
+ NFP_PCIE_QUEUE(0),
+ NFP_QCP_QUEUE_AREA_SZ,
+ &hw->hwqueues_area);
+
+ if (!hwport0->hw_queues) {
+ printf("nfp_rtsym_map fails for net.qc\n");
+ err = -EIO;
+ goto dev_err_ctrl_map;
+ }
- /* Lets seize the chance to read eth table from hw */
- if (nfp_nsp_eth_read_table(nspu_desc, &hw->eth_table))
- return -ENODEV;
+ PMD_INIT_LOG(DEBUG, "tx/rx bar address: 0x%p\n",
+ hwport0->hw_queues);
}
if (hw->is_pf) {
eth_dev->data->mac_addrs = rte_zmalloc("mac_addr", ETHER_ADDR_LEN, 0);
if (eth_dev->data->mac_addrs == NULL) {
PMD_INIT_LOG(ERR, "Failed to space for MAC address");
- return -ENOMEM;
+ err = -ENOMEM;
+ goto dev_err_queues_map;
}
if (hw->is_pf) {
}
if (!is_valid_assigned_ether_addr((struct ether_addr *)&hw->mac_addr)) {
+ PMD_INIT_LOG(INFO, "Using random mac address for port %d\n",
+ port);
/* Using random mac addresses for VFs */
eth_random_addr(&hw->mac_addr[0]);
nfp_net_write_mac(hw, (uint8_t *)&hw->mac_addr);
nfp_net_stats_reset(eth_dev);
return 0;
+
+dev_err_queues_map:
+ nfp_cpp_area_free(hw->hwqueues_area);
+dev_err_ctrl_map:
+ nfp_cpp_area_free(hw->ctrl_area);
+
+ return err;
}
static int
nfp_pf_create_dev(struct rte_pci_device *dev, int port, int ports,
- nfpu_desc_t *nfpu_desc, void **priv)
+ struct nfp_cpp *cpp, struct nfp_hwinfo *hwinfo,
+ int phys_port, struct nfp_rtsym_table *sym_tbl, void **priv)
{
struct rte_eth_dev *eth_dev;
struct nfp_net_hw *hw;
* Then dev_private is adjusted per port.
*/
hw = (struct nfp_net_hw *)(eth_dev->data->dev_private) + port;
- hw->nspu_desc = nfpu_desc->nspu;
- hw->nfpu_desc = nfpu_desc;
+ hw->cpp = cpp;
+ hw->hwinfo = hwinfo;
+ hw->sym_tbl = sym_tbl;
+ hw->pf_port_idx = phys_port;
hw->is_pf = 1;
if (ports > 1)
hw->pf_multiport_enabled = 1;
+ hw->total_ports = ports;
+
eth_dev->device = &dev->device;
rte_eth_copy_pci_info(eth_dev, dev);
return ret;
}
+#define DEFAULT_FW_PATH "/lib/firmware/netronome"
+
+static int
+nfp_fw_upload(struct rte_pci_device *dev, struct nfp_nsp *nsp, char *card)
+{
+ struct nfp_cpp *cpp = nsp->cpp;
+ int fw_f;
+ char *fw_buf;
+ char fw_name[100];
+ char serial[100];
+ struct stat file_stat;
+ off_t fsize, bytes;
+
+ /* Looking for firmware file in order of priority */
+
+ /* First try to find a firmware image specific for this device */
+ sprintf(serial, "serial-%02x-%02x-%02x-%02x-%02x-%02x-%02x-%02x",
+ cpp->serial[0], cpp->serial[1], cpp->serial[2], cpp->serial[3],
+ cpp->serial[4], cpp->serial[5], cpp->interface >> 8,
+ cpp->interface & 0xff);
+
+ sprintf(fw_name, "%s/%s.nffw", DEFAULT_FW_PATH, serial);
+
+ RTE_LOG(DEBUG, PMD, "Trying with fw file: %s\n", fw_name);
+ fw_f = open(fw_name, O_RDONLY);
+ if (fw_f > 0)
+ goto read_fw;
+
+ /* Then try the PCI name */
+ sprintf(fw_name, "%s/pci-%s.nffw", DEFAULT_FW_PATH, dev->device.name);
+
+ RTE_LOG(DEBUG, PMD, "Trying with fw file: %s\n", fw_name);
+ fw_f = open(fw_name, O_RDONLY);
+ if (fw_f > 0)
+ goto read_fw;
+
+ /* Finally try the card type and media */
+ sprintf(fw_name, "%s/%s", DEFAULT_FW_PATH, card);
+ RTE_LOG(DEBUG, PMD, "Trying with fw file: %s\n", fw_name);
+ fw_f = open(fw_name, O_RDONLY);
+ if (fw_f < 0) {
+ RTE_LOG(INFO, PMD, "Firmware file %s not found.", fw_name);
+ return -ENOENT;
+ }
+
+read_fw:
+ if (fstat(fw_f, &file_stat) < 0) {
+ RTE_LOG(INFO, PMD, "Firmware file %s size is unknown", fw_name);
+ close(fw_f);
+ return -ENOENT;
+ }
+
+ fsize = file_stat.st_size;
+ RTE_LOG(INFO, PMD, "Firmware file found at %s with size: %" PRIu64 "\n",
+ fw_name, (uint64_t)fsize);
+
+ fw_buf = malloc((size_t)fsize);
+ if (!fw_buf) {
+ RTE_LOG(INFO, PMD, "malloc failed for fw buffer");
+ close(fw_f);
+ return -ENOMEM;
+ }
+ memset(fw_buf, 0, fsize);
+
+ bytes = read(fw_f, fw_buf, fsize);
+ if (bytes != fsize) {
+ RTE_LOG(INFO, PMD, "Reading fw to buffer failed.\n"
+ "Just %" PRIu64 " of %" PRIu64 " bytes read",
+ (uint64_t)bytes, (uint64_t)fsize);
+ free(fw_buf);
+ close(fw_f);
+ return -EIO;
+ }
+
+ RTE_LOG(INFO, PMD, "Uploading the firmware ...");
+ nfp_nsp_load_fw(nsp, fw_buf, bytes);
+ RTE_LOG(INFO, PMD, "Done");
+
+ free(fw_buf);
+ close(fw_f);
+
+ return 0;
+}
+
+static int
+nfp_fw_setup(struct rte_pci_device *dev, struct nfp_cpp *cpp,
+ struct nfp_eth_table *nfp_eth_table, struct nfp_hwinfo *hwinfo)
+{
+ struct nfp_nsp *nsp;
+ const char *nfp_fw_model;
+ char card_desc[100];
+ int err = 0;
+
+ nfp_fw_model = nfp_hwinfo_lookup(hwinfo, "assembly.partno");
+
+ if (nfp_fw_model) {
+ RTE_LOG(INFO, PMD, "firmware model found: %s\n", nfp_fw_model);
+ } else {
+ RTE_LOG(ERR, PMD, "firmware model NOT found\n");
+ return -EIO;
+ }
+
+ if (nfp_eth_table->count == 0 || nfp_eth_table->count > 8) {
+ RTE_LOG(ERR, PMD, "NFP ethernet table reports wrong ports: %u\n",
+ nfp_eth_table->count);
+ return -EIO;
+ }
+
+ RTE_LOG(INFO, PMD, "NFP ethernet port table reports %u ports\n",
+ nfp_eth_table->count);
+
+ RTE_LOG(INFO, PMD, "Port speed: %u\n", nfp_eth_table->ports[0].speed);
+
+ sprintf(card_desc, "nic_%s_%dx%d.nffw", nfp_fw_model,
+ nfp_eth_table->count, nfp_eth_table->ports[0].speed / 1000);
+
+ nsp = nfp_nsp_open(cpp);
+ if (!nsp) {
+ RTE_LOG(ERR, PMD, "NFP error when obtaining NSP handle\n");
+ return -EIO;
+ }
+
+ nfp_nsp_device_soft_reset(nsp);
+ err = nfp_fw_upload(dev, nsp, card_desc);
+
+ nfp_nsp_close(nsp);
+ return err;
+}
+
static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *dev)
{
- nfpu_desc_t *nfpu_desc;
- nspu_desc_t *nspu_desc;
- uint64_t offset_symbol;
- uint8_t *bar_offset;
- int major, minor;
+ struct nfp_cpp *cpp;
+ struct nfp_hwinfo *hwinfo;
+ struct nfp_rtsym_table *sym_tbl;
+ struct nfp_eth_table *nfp_eth_table = NULL;
int total_ports;
void *priv = 0;
int ret = -ENODEV;
+ int err;
int i;
if (!dev)
return ret;
- nfpu_desc = rte_malloc("nfp nfpu", sizeof(nfpu_desc_t), 0);
- if (!nfpu_desc)
- return -ENOMEM;
-
- if (nfpu_open(dev, nfpu_desc, 0) < 0) {
- RTE_LOG(ERR, PMD,
- "nfpu_open failed\n");
- goto nfpu_error;
+ cpp = nfp_cpp_from_device_name(dev->device.name);
+ if (!cpp) {
+ RTE_LOG(ERR, PMD, "A CPP handle can not be obtained");
+ ret = -EIO;
+ goto error;
}
- nspu_desc = nfpu_desc->nspu;
+ hwinfo = nfp_hwinfo_read(cpp);
+ if (!hwinfo) {
+ RTE_LOG(ERR, PMD, "Error reading hwinfo table");
+ return -EIO;
+ }
+ nfp_eth_table = nfp_eth_read_ports(cpp);
+ if (!nfp_eth_table) {
+ RTE_LOG(ERR, PMD, "Error reading NFP ethernet table\n");
+ return -EIO;
+ }
- /* Check NSP ABI version */
- if (nfp_nsp_get_abi_version(nspu_desc, &major, &minor) < 0) {
- RTE_LOG(INFO, PMD, "NFP NSP not present\n");
+ if (nfp_fw_setup(dev, cpp, nfp_eth_table, hwinfo)) {
+ RTE_LOG(INFO, PMD, "Error when uploading firmware\n");
+ ret = -EIO;
goto error;
}
- PMD_INIT_LOG(INFO, "nspu ABI version: %d.%d\n", major, minor);
- if ((major == 0) && (minor < 20)) {
- RTE_LOG(INFO, PMD, "NFP NSP ABI version too old. Required 0.20 or higher\n");
+ /* Now the symbol table should be there */
+ sym_tbl = nfp_rtsym_table_read(cpp);
+ if (!sym_tbl) {
+ RTE_LOG(ERR, PMD, "Something is wrong with the firmware"
+ " symbol table");
+ ret = -EIO;
goto error;
}
- ret = nfp_nsp_fw_setup(nspu_desc, "nfd_cfg_pf0_num_ports",
- &offset_symbol);
- if (ret)
+ total_ports = nfp_rtsym_read_le(sym_tbl, "nfd_cfg_pf0_num_ports", &err);
+ if (total_ports != (int)nfp_eth_table->count) {
+ RTE_LOG(ERR, PMD, "Inconsistent number of ports\n");
+ ret = -EIO;
goto error;
-
- bar_offset = (uint8_t *)dev->mem_resource[0].addr;
- bar_offset += offset_symbol;
- total_ports = (uint32_t)*bar_offset;
+ }
PMD_INIT_LOG(INFO, "Total pf ports: %d\n", total_ports);
if (total_ports <= 0 || total_ports > 8) {
}
for (i = 0; i < total_ports; i++) {
- ret = nfp_pf_create_dev(dev, i, total_ports, nfpu_desc, &priv);
+ ret = nfp_pf_create_dev(dev, i, total_ports, cpp, hwinfo,
+ nfp_eth_table->ports[i].index,
+ sym_tbl, &priv);
if (ret)
- goto error;
+ break;
}
- return 0;
-
error:
- nfpu_close(nfpu_desc);
-nfpu_error:
- rte_free(nfpu_desc);
-
+ free(nfp_eth_table);
return ret;
}
if ((pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC) ||
(pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC)) {
port = get_pf_port_number(eth_dev->data->name);
+ /*
+ * hotplug is not possible with multiport PF although freeing
+ * data structures can be done for first port.
+ */
+ if (port != 0)
+ return -ENOTSUP;
hwport0 = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
hw = &hwport0[port];
+ nfp_cpp_area_free(hw->ctrl_area);
+ nfp_cpp_area_free(hw->hwqueues_area);
+ free(hw->hwinfo);
+ free(hw->sym_tbl);
+ nfp_cpp_free(hw->cpp);
} else {
hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
}
git.droids-corp.org / dpdk.git / blobdiff