vdpa/mlx5: support direct HW notifications
[dpdk.git] / drivers / vdpa / mlx5 / mlx5_vdpa.c
index 57619d2..b9279ac 100644 (file)
@@ -1,15 +1,19 @@
 /* SPDX-License-Identifier: BSD-3-Clause
  * Copyright 2019 Mellanox Technologies, Ltd
  */
+#include <unistd.h>
+
 #include <rte_malloc.h>
 #include <rte_log.h>
 #include <rte_errno.h>
 #include <rte_bus_pci.h>
+#include <rte_pci.h>
 
 #include <mlx5_glue.h>
 #include <mlx5_common.h>
 #include <mlx5_devx_cmds.h>
 #include <mlx5_prm.h>
+#include <mlx5_nl.h>
 
 #include "mlx5_vdpa_utils.h"
 #include "mlx5_vdpa.h"
@@ -128,6 +132,29 @@ mlx5_vdpa_set_vring_state(int vid, int vring, int state)
        return mlx5_vdpa_virtq_enable(virtq, state);
 }
 
+static int
+mlx5_vdpa_direct_db_prepare(struct mlx5_vdpa_priv *priv)
+{
+       int ret;
+
+       if (priv->direct_notifier) {
+               ret = rte_vhost_host_notifier_ctrl(priv->vid, false);
+               if (ret != 0) {
+                       DRV_LOG(INFO, "Direct HW notifier FD cannot be "
+                               "destroyed for device %d: %d.", priv->vid, ret);
+                       return -1;
+               }
+               priv->direct_notifier = 0;
+       }
+       ret = rte_vhost_host_notifier_ctrl(priv->vid, true);
+       if (ret != 0)
+               DRV_LOG(INFO, "Direct HW notifier FD cannot be configured for"
+                       " device %d: %d.", priv->vid, ret);
+       else
+               priv->direct_notifier = 1;
+       return 0;
+}
+
 static int
 mlx5_vdpa_features_set(int vid)
 {
@@ -205,8 +232,9 @@ mlx5_vdpa_dev_config(int vid)
                return -1;
        }
        priv->vid = vid;
-       if (mlx5_vdpa_mem_register(priv) || mlx5_vdpa_virtqs_prepare(priv) ||
-           mlx5_vdpa_steer_setup(priv) || mlx5_vdpa_cqe_event_setup(priv)) {
+       if (mlx5_vdpa_mem_register(priv) || mlx5_vdpa_direct_db_prepare(priv) ||
+           mlx5_vdpa_virtqs_prepare(priv) || mlx5_vdpa_steer_setup(priv) ||
+           mlx5_vdpa_cqe_event_setup(priv)) {
                mlx5_vdpa_dev_close(vid);
                return -1;
        }
@@ -214,6 +242,40 @@ mlx5_vdpa_dev_config(int vid)
        return 0;
 }
 
+static int
+mlx5_vdpa_get_device_fd(int vid)
+{
+       int did = rte_vhost_get_vdpa_device_id(vid);
+       struct mlx5_vdpa_priv *priv = mlx5_vdpa_find_priv_resource_by_did(did);
+
+       if (priv == NULL) {
+               DRV_LOG(ERR, "Invalid device id: %d.", did);
+               return -EINVAL;
+       }
+       return priv->ctx->cmd_fd;
+}
+
+static int
+mlx5_vdpa_get_notify_area(int vid, int qid, uint64_t *offset, uint64_t *size)
+{
+       int did = rte_vhost_get_vdpa_device_id(vid);
+       struct mlx5_vdpa_priv *priv = mlx5_vdpa_find_priv_resource_by_did(did);
+
+       RTE_SET_USED(qid);
+       if (priv == NULL) {
+               DRV_LOG(ERR, "Invalid device id: %d.", did);
+               return -EINVAL;
+       }
+       if (!priv->var) {
+               DRV_LOG(ERR, "VAR was not created for device %d, is the device"
+                       " configured?.", did);
+               return -EINVAL;
+       }
+       *offset = priv->var->mmap_off;
+       *size = priv->var->length;
+       return 0;
+}
+
 static struct rte_vdpa_dev_ops mlx5_vdpa_ops = {
        .get_queue_num = mlx5_vdpa_get_queue_num,
        .get_features = mlx5_vdpa_get_vdpa_features,
@@ -224,10 +286,149 @@ static struct rte_vdpa_dev_ops mlx5_vdpa_ops = {
        .set_features = mlx5_vdpa_features_set,
        .migration_done = NULL,
        .get_vfio_group_fd = NULL,
-       .get_vfio_device_fd = NULL,
-       .get_notify_area = NULL,
+       .get_vfio_device_fd = mlx5_vdpa_get_device_fd,
+       .get_notify_area = mlx5_vdpa_get_notify_area,
 };
 
+static struct ibv_device *
+mlx5_vdpa_get_ib_device_match(struct rte_pci_addr *addr)
+{
+       int n;
+       struct ibv_device **ibv_list = mlx5_glue->get_device_list(&n);
+       struct ibv_device *ibv_match = NULL;
+
+       if (!ibv_list) {
+               rte_errno = ENOSYS;
+               return NULL;
+       }
+       while (n-- > 0) {
+               struct rte_pci_addr pci_addr;
+
+               DRV_LOG(DEBUG, "Checking device \"%s\"..", ibv_list[n]->name);
+               if (mlx5_dev_to_pci_addr(ibv_list[n]->ibdev_path, &pci_addr))
+                       continue;
+               if (memcmp(addr, &pci_addr, sizeof(pci_addr)))
+                       continue;
+               ibv_match = ibv_list[n];
+               break;
+       }
+       if (!ibv_match)
+               rte_errno = ENOENT;
+       mlx5_glue->free_device_list(ibv_list);
+       return ibv_match;
+}
+
+/* Try to disable ROCE by Netlink\Devlink. */
+static int
+mlx5_vdpa_nl_roce_disable(const char *addr)
+{
+       int nlsk_fd = mlx5_nl_init(NETLINK_GENERIC);
+       int devlink_id;
+       int enable;
+       int ret;
+
+       if (nlsk_fd < 0)
+               return nlsk_fd;
+       devlink_id = mlx5_nl_devlink_family_id_get(nlsk_fd);
+       if (devlink_id < 0) {
+               ret = devlink_id;
+               DRV_LOG(DEBUG, "Failed to get devlink id for ROCE operations by"
+                       " Netlink.");
+               goto close;
+       }
+       ret = mlx5_nl_enable_roce_get(nlsk_fd, devlink_id, addr, &enable);
+       if (ret) {
+               DRV_LOG(DEBUG, "Failed to get ROCE enable by Netlink: %d.",
+                       ret);
+               goto close;
+       } else if (!enable) {
+               DRV_LOG(INFO, "ROCE has already disabled(Netlink).");
+               goto close;
+       }
+       ret = mlx5_nl_enable_roce_set(nlsk_fd, devlink_id, addr, 0);
+       if (ret)
+               DRV_LOG(DEBUG, "Failed to disable ROCE by Netlink: %d.", ret);
+       else
+               DRV_LOG(INFO, "ROCE is disabled by Netlink successfully.");
+close:
+       close(nlsk_fd);
+       return ret;
+}
+
+/* Try to disable ROCE by sysfs. */
+static int
+mlx5_vdpa_sys_roce_disable(const char *addr)
+{
+       FILE *file_o;
+       int enable;
+       int ret;
+
+       MKSTR(file_p, "/sys/bus/pci/devices/%s/roce_enable", addr);
+       file_o = fopen(file_p, "rb");
+       if (!file_o) {
+               rte_errno = ENOTSUP;
+               return -ENOTSUP;
+       }
+       ret = fscanf(file_o, "%d", &enable);
+       if (ret != 1) {
+               rte_errno = EINVAL;
+               ret = EINVAL;
+               goto close;
+       } else if (!enable) {
+               ret = 0;
+               DRV_LOG(INFO, "ROCE has already disabled(sysfs).");
+               goto close;
+       }
+       fclose(file_o);
+       file_o = fopen(file_p, "wb");
+       if (!file_o) {
+               rte_errno = ENOTSUP;
+               return -ENOTSUP;
+       }
+       fprintf(file_o, "0\n");
+       ret = 0;
+close:
+       if (ret)
+               DRV_LOG(DEBUG, "Failed to disable ROCE by sysfs: %d.", ret);
+       else
+               DRV_LOG(INFO, "ROCE is disabled by sysfs successfully.");
+       fclose(file_o);
+       return ret;
+}
+
+#define MLX5_VDPA_MAX_RETRIES 20
+#define MLX5_VDPA_USEC 1000
+static int
+mlx5_vdpa_roce_disable(struct rte_pci_addr *addr, struct ibv_device **ibv)
+{
+       char addr_name[64] = {0};
+
+       rte_pci_device_name(addr, addr_name, sizeof(addr_name));
+       /* Firstly try to disable ROCE by Netlink and fallback to sysfs. */
+       if (mlx5_vdpa_nl_roce_disable(addr_name) == 0 ||
+           mlx5_vdpa_sys_roce_disable(addr_name) == 0) {
+               /*
+                * Succeed to disable ROCE, wait for the IB device to appear
+                * again after reload.
+                */
+               int r;
+               struct ibv_device *ibv_new;
+
+               for (r = MLX5_VDPA_MAX_RETRIES; r; r--) {
+                       ibv_new = mlx5_vdpa_get_ib_device_match(addr);
+                       if (ibv_new) {
+                               *ibv = ibv_new;
+                               return 0;
+                       }
+                       usleep(MLX5_VDPA_USEC);
+               }
+               DRV_LOG(ERR, "Cannot much device %s after ROCE disable, "
+                       "retries exceed %d", addr_name, MLX5_VDPA_MAX_RETRIES);
+               rte_errno = EAGAIN;
+       }
+       return -rte_errno;
+}
+
 /**
  * DPDK callback to register a PCI device.
  *
@@ -246,8 +447,7 @@ static int
 mlx5_vdpa_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
                    struct rte_pci_device *pci_dev __rte_unused)
 {
-       struct ibv_device **ibv_list;
-       struct ibv_device *ibv_match = NULL;
+       struct ibv_device *ibv;
        struct mlx5_vdpa_priv *priv = NULL;
        struct ibv_context *ctx = NULL;
        struct mlx5_hca_attr attr;
@@ -258,42 +458,25 @@ mlx5_vdpa_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
                        " driver.");
                return 1;
        }
-       errno = 0;
-       ibv_list = mlx5_glue->get_device_list(&ret);
-       if (!ibv_list) {
-               rte_errno = ENOSYS;
-               DRV_LOG(ERR, "Failed to get device list, is ib_uverbs loaded?");
+       ibv = mlx5_vdpa_get_ib_device_match(&pci_dev->addr);
+       if (!ibv) {
+               DRV_LOG(ERR, "No matching IB device for PCI slot "
+                       PCI_PRI_FMT ".", pci_dev->addr.domain,
+                       pci_dev->addr.bus, pci_dev->addr.devid,
+                       pci_dev->addr.function);
                return -rte_errno;
-       }
-       while (ret-- > 0) {
-               struct rte_pci_addr pci_addr;
-
-               DRV_LOG(DEBUG, "Checking device \"%s\"..", ibv_list[ret]->name);
-               if (mlx5_dev_to_pci_addr(ibv_list[ret]->ibdev_path, &pci_addr))
-                       continue;
-               if (pci_dev->addr.domain != pci_addr.domain ||
-                   pci_dev->addr.bus != pci_addr.bus ||
-                   pci_dev->addr.devid != pci_addr.devid ||
-                   pci_dev->addr.function != pci_addr.function)
-                       continue;
+       } else {
                DRV_LOG(INFO, "PCI information matches for device \"%s\".",
-                       ibv_list[ret]->name);
-               ibv_match = ibv_list[ret];
-               break;
+                       ibv->name);
        }
-       mlx5_glue->free_device_list(ibv_list);
-       if (!ibv_match) {
-               DRV_LOG(ERR, "No matching IB device for PCI slot "
-                       "%" SCNx32 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 ".",
-                       pci_dev->addr.domain, pci_dev->addr.bus,
-                       pci_dev->addr.devid, pci_dev->addr.function);
-               rte_errno = ENOENT;
+       if (mlx5_vdpa_roce_disable(&pci_dev->addr, &ibv) != 0) {
+               DRV_LOG(WARNING, "Failed to disable ROCE for \"%s\".",
+                       ibv->name);
                return -rte_errno;
        }
-       ctx = mlx5_glue->dv_open_device(ibv_match);
+       ctx = mlx5_glue->dv_open_device(ibv);
        if (!ctx) {
-               DRV_LOG(ERR, "Failed to open IB device \"%s\".",
-                       ibv_match->name);
+               DRV_LOG(ERR, "Failed to open IB device \"%s\".", ibv->name);
                rte_errno = ENODEV;
                return -rte_errno;
        }
@@ -321,7 +504,12 @@ mlx5_vdpa_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
        }
        priv->ctx = ctx;
        priv->dev_addr.pci_addr = pci_dev->addr;
-       priv->dev_addr.type = PCI_ADDR;
+       priv->dev_addr.type = VDPA_ADDR_PCI;
+       priv->var = mlx5_glue->dv_alloc_var(ctx, 0);
+       if (!priv->var) {
+               DRV_LOG(ERR, "Failed to allocate VAR %u.\n", errno);
+               goto error;
+       }
        priv->id = rte_vdpa_register_device(&priv->dev_addr, &mlx5_vdpa_ops);
        if (priv->id < 0) {
                DRV_LOG(ERR, "Failed to register vDPA device.");
@@ -336,8 +524,11 @@ mlx5_vdpa_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
        return 0;
 
 error:
-       if (priv)
+       if (priv) {
+               if (priv->var)
+                       mlx5_glue->dv_free_var(priv->var);
                rte_free(priv);
+       }
        if (ctx)
                mlx5_glue->close_device(ctx);
        return -rte_errno;
@@ -374,6 +565,10 @@ mlx5_vdpa_pci_remove(struct rte_pci_device *pci_dev)
        if (found) {
                if (priv->configured)
                        mlx5_vdpa_dev_close(priv->vid);
+               if (priv->var) {
+                       mlx5_glue->dv_free_var(priv->var);
+                       priv->var = NULL;
+               }
                mlx5_glue->close_device(priv->ctx);
                rte_free(priv);
        }
@@ -381,14 +576,6 @@ mlx5_vdpa_pci_remove(struct rte_pci_device *pci_dev)
 }
 
 static const struct rte_pci_id mlx5_vdpa_pci_id_map[] = {
-       {
-               RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
-                              PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
-       },
-       {
-               RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
-                              PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF)
-       },
        {
                RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
                                PCI_DEVICE_ID_MELLANOX_CONNECTX6)
@@ -405,6 +592,10 @@ static const struct rte_pci_id mlx5_vdpa_pci_id_map[] = {
                RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
                                PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF)
        },
+       {
+               RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+                               PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF)
+       },
        {
                .vendor_id = 0
        }