doc: remove unnecessary sample app guide table
[dpdk.git] / examples / exception_path / main.c
index 06a0d4c..85dbd7e 100644 (file)
@@ -14,7 +14,7 @@
 
 #include <netinet/in.h>
 #include <net/if.h>
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
 #include <linux/if_tun.h>
 #endif
 #include <fcntl.h>
 #include <rte_string_fns.h>
 #include <rte_cycles.h>
 
+#ifndef APP_MAX_LCORE
+#if (RTE_MAX_LCORE > 64)
+#define APP_MAX_LCORE 64
+#else
+#define APP_MAX_LCORE RTE_MAX_LCORE
+#endif
+#endif
+
 /* Macros for printing using RTE_LOG */
 #define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
 #define FATAL_ERROR(fmt, args...)       rte_exit(EXIT_FAILURE, fmt "\n", ##args)
 #define PRINT_INFO(fmt, args...)        RTE_LOG(INFO, APP, fmt "\n", ##args)
 
 /* Max ports than can be used (each port is associated with two lcores) */
-#define MAX_PORTS               (RTE_MAX_LCORE / 2)
+#define MAX_PORTS               (APP_MAX_LCORE / 2)
 
 /* Max size of a single packet */
 #define MAX_PACKET_SZ (2048)
 #define MEMPOOL_CACHE_SZ        PKT_BURST_SZ
 
 /* Number of RX ring descriptors */
-#define NB_RXD                  128
+#define NB_RXD                  1024
 
 /* Number of TX ring descriptors */
-#define NB_TXD                  512
+#define NB_TXD                  1024
 
 /*
  * RX and TX Prefetch, Host, and Write-back threshold values should be
  */
 
 /* Options for configuring ethernet port */
-static const struct rte_eth_conf port_conf = {
-       .rxmode = {
-               .header_split = 0,      /* Header Split disabled */
-               .hw_ip_checksum = 0,    /* IP checksum offload disabled */
-               .hw_vlan_filter = 0,    /* VLAN filtering disabled */
-               .jumbo_frame = 0,       /* Jumbo Frame Support disabled */
-               .hw_strip_crc = 1,      /* CRC stripped by hardware */
-       },
+static struct rte_eth_conf port_conf = {
        .txmode = {
                .mq_mode = ETH_MQ_TX_NONE,
        },
@@ -104,17 +105,17 @@ static uint64_t input_cores_mask = 0;
 static uint64_t output_cores_mask = 0;
 
 /* Array storing port_id that is associated with each lcore */
-static uint16_t port_ids[RTE_MAX_LCORE];
+static uint16_t port_ids[APP_MAX_LCORE];
 
 /* Structure type for recording lcore-specific stats */
 struct stats {
        uint64_t rx;
        uint64_t tx;
        uint64_t dropped;
-};
+} __rte_cache_aligned;
 
 /* Array of lcore-specific stats */
-static struct stats lcore_stats[RTE_MAX_LCORE];
+static struct stats lcore_stats[APP_MAX_LCORE];
 
 /* Print out statistics on packets handled */
 static void
@@ -127,6 +128,9 @@ print_stats(void)
               " Lcore    Port            RX            TX    Dropped on TX\n"
               "-------  ------  ------------  ------------  ---------------\n");
        RTE_LCORE_FOREACH(i) {
+               /* limit ourselves to application supported cores only */
+               if (i >= APP_MAX_LCORE)
+                       break;
                printf("%6u %7u %13"PRIu64" %13"PRIu64" %16"PRIu64"\n",
                       i, (unsigned)port_ids[i],
                       lcore_stats[i].rx, lcore_stats[i].tx,
@@ -152,7 +156,7 @@ signal_handler(int signum)
        }
 }
 
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
 /*
  * Create a tap network interface, or use existing one with same name.
  * If name[0]='\0' then a name is automatically assigned and returned in name.
@@ -172,7 +176,7 @@ static int tap_create(char *name)
        ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
 
        if (name && *name)
-               snprintf(ifr.ifr_name, IFNAMSIZ, "%s", name);
+               strlcpy(ifr.ifr_name, name, IFNAMSIZ);
 
        ret = ioctl(fd, TUNSETIFF, (void *) &ifr);
        if (ret < 0) {
@@ -181,7 +185,7 @@ static int tap_create(char *name)
        }
 
        if (name)
-               snprintf(name, IFNAMSIZ, "%s", ifr.ifr_name);
+               strlcpy(name, ifr.ifr_name, IFNAMSIZ);
 
        return fd;
 }
@@ -333,7 +337,9 @@ setup_port_lcore_affinities(void)
        uint16_t rx_port = 0;
 
        /* Setup port_ids[] array, and check masks were ok */
-       RTE_LCORE_FOREACH(i) {
+       for (i = 0; i < APP_MAX_LCORE; i++) {
+               if (!rte_lcore_is_enabled(i))
+                       continue;
                if (input_cores_mask & (1ULL << i)) {
                        /* Skip ports that are not enabled */
                        while ((ports_mask & (1 << rx_port)) == 0) {
@@ -418,11 +424,24 @@ init_port(uint16_t port)
        int ret;
        uint16_t nb_rxd = NB_RXD;
        uint16_t nb_txd = NB_TXD;
+       struct rte_eth_dev_info dev_info;
+       struct rte_eth_rxconf rxq_conf;
+       struct rte_eth_txconf txq_conf;
+       struct rte_eth_conf local_port_conf = port_conf;
 
        /* Initialise device and RX/TX queues */
        PRINT_INFO("Initialising port %u ...", port);
        fflush(stdout);
-       ret = rte_eth_dev_configure(port, 1, 1, &port_conf);
+
+       ret = rte_eth_dev_info_get(port, &dev_info);
+       if (ret != 0)
+               FATAL_ERROR("Error during getting device (port %u) info: %s\n",
+                       port, strerror(-ret));
+
+       if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+               local_port_conf.txmode.offloads |=
+                       DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+       ret = rte_eth_dev_configure(port, 1, 1, &local_port_conf);
        if (ret < 0)
                FATAL_ERROR("Could not configure port%u (%d)", port, ret);
 
@@ -431,17 +450,21 @@ init_port(uint16_t port)
                FATAL_ERROR("Could not adjust number of descriptors for port%u (%d)",
                            port, ret);
 
+       rxq_conf = dev_info.default_rxconf;
+       rxq_conf.offloads = local_port_conf.rxmode.offloads;
        ret = rte_eth_rx_queue_setup(port, 0, nb_rxd,
                                rte_eth_dev_socket_id(port),
-                               NULL,
+                               &rxq_conf,
                                pktmbuf_pool);
        if (ret < 0)
                FATAL_ERROR("Could not setup up RX queue for port%u (%d)",
                                port, ret);
 
+       txq_conf = dev_info.default_txconf;
+       txq_conf.offloads = local_port_conf.txmode.offloads;
        ret = rte_eth_tx_queue_setup(port, 0, nb_txd,
                                rte_eth_dev_socket_id(port),
-                               NULL);
+                               &txq_conf);
        if (ret < 0)
                FATAL_ERROR("Could not setup up TX queue for port%u (%d)",
                                port, ret);
@@ -450,28 +473,39 @@ init_port(uint16_t port)
        if (ret < 0)
                FATAL_ERROR("Could not start port%u (%d)", port, ret);
 
-       rte_eth_promiscuous_enable(port);
+       ret = rte_eth_promiscuous_enable(port);
+       if (ret != 0)
+               FATAL_ERROR("Could not enable promiscuous mode for port%u (%s)",
+                           port, rte_strerror(-ret));
 }
 
 /* Check the link status of all ports in up to 9s, and print them finally */
 static void
-check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
 {
 #define CHECK_INTERVAL 100 /* 100ms */
 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
        uint16_t portid;
        uint8_t count, all_ports_up, print_flag = 0;
        struct rte_eth_link link;
+       int ret;
 
        printf("\nChecking link status");
        fflush(stdout);
        for (count = 0; count <= MAX_CHECK_TIME; count++) {
                all_ports_up = 1;
-               for (portid = 0; portid < port_num; portid++) {
+               RTE_ETH_FOREACH_DEV(portid) {
                        if ((port_mask & (1 << portid)) == 0)
                                continue;
                        memset(&link, 0, sizeof(link));
-                       rte_eth_link_get_nowait(portid, &link);
+                       ret = rte_eth_link_get_nowait(portid, &link);
+                       if (ret < 0) {
+                               all_ports_up = 0;
+                               if (print_flag == 1)
+                                       printf("Port %u link get failed: %s\n",
+                                               portid, rte_strerror(-ret));
+                               continue;
+                       }
                        /* print link status if flag set */
                        if (print_flag == 1) {
                                if (link.link_status)
@@ -539,7 +573,7 @@ main(int argc, char** argv)
        }
 
        /* Get number of ports found in scan */
-       nb_sys_ports = rte_eth_dev_count();
+       nb_sys_ports = rte_eth_dev_count_avail();
        if (nb_sys_ports == 0)
                FATAL_ERROR("No supported Ethernet device found");
        /* Find highest port set in portmask */
@@ -551,14 +585,14 @@ main(int argc, char** argv)
                FATAL_ERROR("Port mask requires more ports than available");
 
        /* Initialise each port */
-       for (port = 0; port < nb_sys_ports; port++) {
+       RTE_ETH_FOREACH_DEV(port) {
                /* Skip ports that are not enabled */
                if ((ports_mask & (1 << port)) == 0) {
                        continue;
                }
                init_port(port);
        }
-       check_all_ports_link_status(nb_sys_ports, ports_mask);
+       check_all_ports_link_status(ports_mask);
 
        /* Launch per-lcore function on every lcore */
        rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);