#include <netinet/in.h>
#include <net/if.h>
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
#include <linux/if_tun.h>
#endif
#include <fcntl.h>
#include <rte_string_fns.h>
#include <rte_cycles.h>
+#ifndef APP_MAX_LCORE
+#if (RTE_MAX_LCORE > 64)
+#define APP_MAX_LCORE 64
+#else
+#define APP_MAX_LCORE RTE_MAX_LCORE
+#endif
+#endif
+
/* Macros for printing using RTE_LOG */
#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
#define FATAL_ERROR(fmt, args...) rte_exit(EXIT_FAILURE, fmt "\n", ##args)
#define PRINT_INFO(fmt, args...) RTE_LOG(INFO, APP, fmt "\n", ##args)
/* Max ports than can be used (each port is associated with two lcores) */
-#define MAX_PORTS (RTE_MAX_LCORE / 2)
+#define MAX_PORTS (APP_MAX_LCORE / 2)
/* Max size of a single packet */
#define MAX_PACKET_SZ (2048)
/* Options for configuring ethernet port */
static struct rte_eth_conf port_conf = {
- .rxmode = {
- .ignore_offload_bitfield = 1,
- .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
- },
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
},
static uint64_t output_cores_mask = 0;
/* Array storing port_id that is associated with each lcore */
-static uint16_t port_ids[RTE_MAX_LCORE];
+static uint16_t port_ids[APP_MAX_LCORE];
/* Structure type for recording lcore-specific stats */
struct stats {
} __rte_cache_aligned;
/* Array of lcore-specific stats */
-static struct stats lcore_stats[RTE_MAX_LCORE];
+static struct stats lcore_stats[APP_MAX_LCORE];
/* Print out statistics on packets handled */
static void
" Lcore Port RX TX Dropped on TX\n"
"------- ------ ------------ ------------ ---------------\n");
RTE_LCORE_FOREACH(i) {
+ /* limit ourselves to application supported cores only */
+ if (i >= APP_MAX_LCORE)
+ break;
printf("%6u %7u %13"PRIu64" %13"PRIu64" %16"PRIu64"\n",
i, (unsigned)port_ids[i],
lcore_stats[i].rx, lcore_stats[i].tx,
}
}
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
/*
* Create a tap network interface, or use existing one with same name.
* If name[0]='\0' then a name is automatically assigned and returned in name.
ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
if (name && *name)
- snprintf(ifr.ifr_name, IFNAMSIZ, "%s", name);
+ strlcpy(ifr.ifr_name, name, IFNAMSIZ);
ret = ioctl(fd, TUNSETIFF, (void *) &ifr);
if (ret < 0) {
}
if (name)
- snprintf(name, IFNAMSIZ, "%s", ifr.ifr_name);
+ strlcpy(name, ifr.ifr_name, IFNAMSIZ);
return fd;
}
uint16_t rx_port = 0;
/* Setup port_ids[] array, and check masks were ok */
- RTE_LCORE_FOREACH(i) {
+ for (i = 0; i < APP_MAX_LCORE; i++) {
+ if (!rte_lcore_is_enabled(i))
+ continue;
if (input_cores_mask & (1ULL << i)) {
/* Skip ports that are not enabled */
while ((ports_mask & (1 << rx_port)) == 0) {
/* Initialise device and RX/TX queues */
PRINT_INFO("Initialising port %u ...", port);
fflush(stdout);
- rte_eth_dev_info_get(port, &dev_info);
+
+ ret = rte_eth_dev_info_get(port, &dev_info);
+ if (ret != 0)
+ FATAL_ERROR("Error during getting device (port %u) info: %s\n",
+ port, strerror(-ret));
+
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
local_port_conf.txmode.offloads |=
DEV_TX_OFFLOAD_MBUF_FAST_FREE;
port, ret);
txq_conf = dev_info.default_txconf;
- txq_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
txq_conf.offloads = local_port_conf.txmode.offloads;
ret = rte_eth_tx_queue_setup(port, 0, nb_txd,
rte_eth_dev_socket_id(port),
if (ret < 0)
FATAL_ERROR("Could not start port%u (%d)", port, ret);
- rte_eth_promiscuous_enable(port);
+ ret = rte_eth_promiscuous_enable(port);
+ if (ret != 0)
+ FATAL_ERROR("Could not enable promiscuous mode for port%u (%s)",
+ port, rte_strerror(-ret));
}
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
uint16_t portid;
uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
+ int ret;
printf("\nChecking link status");
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
all_ports_up = 1;
- for (portid = 0; portid < port_num; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(portid, &link);
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
}
/* Get number of ports found in scan */
- nb_sys_ports = rte_eth_dev_count();
+ nb_sys_ports = rte_eth_dev_count_avail();
if (nb_sys_ports == 0)
FATAL_ERROR("No supported Ethernet device found");
/* Find highest port set in portmask */
FATAL_ERROR("Port mask requires more ports than available");
/* Initialise each port */
- for (port = 0; port < nb_sys_ports; port++) {
+ RTE_ETH_FOREACH_DEV(port) {
/* Skip ports that are not enabled */
if ((ports_mask & (1 << port)) == 0) {
continue;
}
init_port(port);
}
- check_all_ports_link_status(nb_sys_ports, ports_mask);
+ check_all_ports_link_status(ports_mask);
/* Launch per-lcore function on every lcore */
rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
git.droids-corp.org / dpdk.git / blobdiff