#include <rte_flow_classify.h>
#include <rte_table_acl.h>
-#define RX_RING_SIZE 128
-#define TX_RING_SIZE 512
+#define RX_RING_SIZE 1024
+#define TX_RING_SIZE 1024
#define NUM_MBUFS 8191
#define MBUF_CACHE_SIZE 250
static const struct rte_eth_conf port_conf_default = {
.rxmode = {
- .max_rx_pkt_len = ETHER_MAX_LEN,
- .ignore_offload_bitfield = 1,
+ .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
},
};
.size = sizeof(uint8_t),
.field_index = PROTO_FIELD_IPV4,
.input_index = PROTO_INPUT_IPV4,
- .offset = sizeof(struct ether_hdr) +
- offsetof(struct ipv4_hdr, next_proto_id),
+ .offset = sizeof(struct rte_ether_hdr) +
+ offsetof(struct rte_ipv4_hdr, next_proto_id),
},
/* next input field (IPv4 source address) - 4 consecutive bytes. */
{
.size = sizeof(uint32_t),
.field_index = SRC_FIELD_IPV4,
.input_index = SRC_INPUT_IPV4,
- .offset = sizeof(struct ether_hdr) +
- offsetof(struct ipv4_hdr, src_addr),
+ .offset = sizeof(struct rte_ether_hdr) +
+ offsetof(struct rte_ipv4_hdr, src_addr),
},
/* next input field (IPv4 destination address) - 4 consecutive bytes. */
{
.size = sizeof(uint32_t),
.field_index = DST_FIELD_IPV4,
.input_index = DST_INPUT_IPV4,
- .offset = sizeof(struct ether_hdr) +
- offsetof(struct ipv4_hdr, dst_addr),
+ .offset = sizeof(struct rte_ether_hdr) +
+ offsetof(struct rte_ipv4_hdr, dst_addr),
},
/*
* Next 2 fields (src & dst ports) form 4 consecutive bytes.
.size = sizeof(uint16_t),
.field_index = SRCP_FIELD_IPV4,
.input_index = SRCP_DESTP_INPUT_IPV4,
- .offset = sizeof(struct ether_hdr) +
- sizeof(struct ipv4_hdr) +
- offsetof(struct tcp_hdr, src_port),
+ .offset = sizeof(struct rte_ether_hdr) +
+ sizeof(struct rte_ipv4_hdr) +
+ offsetof(struct rte_tcp_hdr, src_port),
},
{
/* rte_flow uses a bit mask for protocol ports */
.size = sizeof(uint16_t),
.field_index = DSTP_FIELD_IPV4,
.input_index = SRCP_DESTP_INPUT_IPV4,
- .offset = sizeof(struct ether_hdr) +
- sizeof(struct ipv4_hdr) +
- offsetof(struct tcp_hdr, dst_port),
+ .offset = sizeof(struct rte_ether_hdr) +
+ sizeof(struct rte_ipv4_hdr) +
+ offsetof(struct rte_tcp_hdr, dst_port),
},
};
port_init(uint8_t port, struct rte_mempool *mbuf_pool)
{
struct rte_eth_conf port_conf = port_conf_default;
- struct ether_addr addr;
+ struct rte_ether_addr addr;
const uint16_t rx_rings = 1, tx_rings = 1;
int retval;
uint16_t q;
struct rte_eth_dev_info dev_info;
struct rte_eth_txconf txconf;
- if (port >= rte_eth_dev_count())
+ if (!rte_eth_dev_is_valid_port(port))
return -1;
- rte_eth_dev_info_get(port, &dev_info);
+ retval = rte_eth_dev_info_get(port, &dev_info);
+ if (retval != 0) {
+ printf("Error during getting device (port %u) info: %s\n",
+ port, strerror(-retval));
+ return retval;
+ }
+
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
port_conf.txmode.offloads |=
DEV_TX_OFFLOAD_MBUF_FAST_FREE;
}
txconf = dev_info.default_txconf;
- txconf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
txconf.offloads = port_conf.txmode.offloads;
/* Allocate and set up 1 TX queue per Ethernet port. */
for (q = 0; q < tx_rings; q++) {
return retval;
/* Display the port MAC address. */
- rte_eth_macaddr_get(port, &addr);
+ retval = rte_eth_macaddr_get(port, &addr);
+ if (retval != 0)
+ return retval;
+
printf("Port %u MAC: %02" PRIx8 " %02" PRIx8 " %02" PRIx8
" %02" PRIx8 " %02" PRIx8 " %02" PRIx8 "\n",
port,
addr.addr_bytes[4], addr.addr_bytes[5]);
/* Enable RX in promiscuous mode for the Ethernet device. */
- rte_eth_promiscuous_enable(port);
+ retval = rte_eth_promiscuous_enable(port);
+ if (retval != 0)
+ return retval;
return 0;
}
* The lcore main. This is the main thread that does the work, reading from
* an input port classifying the packets and writing to an output port.
*/
-static __attribute__((noreturn)) void
+static __rte_noreturn void
lcore_main(struct flow_classifier *cls_app)
{
- const uint8_t nb_ports = rte_eth_dev_count();
- uint8_t port;
+ uint16_t port;
int ret;
int i = 0;
* Check that the port is on the same NUMA node as the polling thread
* for best performance.
*/
- for (port = 0; port < nb_ports; port++)
+ RTE_ETH_FOREACH_DEV(port)
if (rte_eth_dev_socket_id(port) > 0 &&
rte_eth_dev_socket_id(port) != (int)rte_socket_id()) {
printf("\n\n");
* on the paired port.
* The mapping is 0 -> 1, 1 -> 0, 2 -> 3, 3 -> 2, etc.
*/
- for (port = 0; port < nb_ports; port++) {
+ RTE_ETH_FOREACH_DEV(port) {
/* Get burst of RX packets, from first port of pair. */
struct rte_mbuf *bufs[BURST_SIZE];
const uint16_t nb_rx = rte_eth_rx_burst(port, 0,
if (get_cb_field(&in, &m, 0, sizeof(uint32_t) * CHAR_BIT, 0))
return -EINVAL;
- addr[0] = IPv4(a, b, c, d);
+ addr[0] = RTE_IPV4(a, b, c, d);
mask_len[0] = m;
return 0;
}
main(int argc, char *argv[])
{
struct rte_mempool *mbuf_pool;
- uint8_t nb_ports;
- uint8_t portid;
+ uint16_t nb_ports;
+ uint16_t portid;
int ret;
int socket_id;
struct rte_table_acl_params table_acl_params;
rte_exit(EXIT_FAILURE, "Invalid flow_classify parameters\n");
/* Check that there is an even number of ports to send/receive on. */
- nb_ports = rte_eth_dev_count();
+ nb_ports = rte_eth_dev_count_avail();
if (nb_ports < 2 || (nb_ports & 1))
rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
/* Initialize all ports. */
- for (portid = 0; portid < nb_ports; portid++)
+ RTE_ETH_FOREACH_DEV(portid)
if (port_init(portid, mbuf_pool) != 0)
rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8 "\n",
portid);
git.droids-corp.org / dpdk.git / blobdiff