ethdev: fix max Rx packet length
[dpdk.git] / examples / flow_classify / flow_classify.c
index 45b3c1b..8a43f6a 100644 (file)
@@ -15,8 +15,8 @@
 #include <rte_flow_classify.h>
 #include <rte_table_acl.h>
 
-#define RX_RING_SIZE 128
-#define TX_RING_SIZE 512
+#define RX_RING_SIZE 1024
+#define TX_RING_SIZE 1024
 
 #define NUM_MBUFS 8191
 #define MBUF_CACHE_SIZE 250
@@ -59,21 +59,19 @@ static struct{
 } parm_config;
 const char cb_port_delim[] = ":";
 
-static const struct rte_eth_conf port_conf_default = {
-       .rxmode = { .max_rx_pkt_len = ETHER_MAX_LEN }
-};
-
+/* Creation of flow classifier object. 8< */
 struct flow_classifier {
        struct rte_flow_classifier *cls;
-       uint32_t table_id[RTE_FLOW_CLASSIFY_TABLE_MAX];
 };
 
 struct flow_classifier_acl {
        struct flow_classifier cls;
 } __rte_cache_aligned;
+/* >8 End of creation of flow classifier object. */
 
-/* ACL field definitions for IPv4 5 tuple rule */
+/*  Creation of ACL table during initialization of application. 8< */
 
+/* ACL field definitions for IPv4 5 tuple rule */
 enum {
        PROTO_FIELD_IPV4,
        SRC_FIELD_IPV4,
@@ -97,8 +95,8 @@ static struct rte_acl_field_def ipv4_defs[NUM_FIELDS_IPV4] = {
                .size = sizeof(uint8_t),
                .field_index = PROTO_FIELD_IPV4,
                .input_index = PROTO_INPUT_IPV4,
-               .offset = sizeof(struct ether_hdr) +
-                       offsetof(struct ipv4_hdr, next_proto_id),
+               .offset = sizeof(struct rte_ether_hdr) +
+                       offsetof(struct rte_ipv4_hdr, next_proto_id),
        },
        /* next input field (IPv4 source address) - 4 consecutive bytes. */
        {
@@ -107,8 +105,8 @@ static struct rte_acl_field_def ipv4_defs[NUM_FIELDS_IPV4] = {
                .size = sizeof(uint32_t),
                .field_index = SRC_FIELD_IPV4,
                .input_index = SRC_INPUT_IPV4,
-               .offset = sizeof(struct ether_hdr) +
-                       offsetof(struct ipv4_hdr, src_addr),
+               .offset = sizeof(struct rte_ether_hdr) +
+                       offsetof(struct rte_ipv4_hdr, src_addr),
        },
        /* next input field (IPv4 destination address) - 4 consecutive bytes. */
        {
@@ -117,8 +115,8 @@ static struct rte_acl_field_def ipv4_defs[NUM_FIELDS_IPV4] = {
                .size = sizeof(uint32_t),
                .field_index = DST_FIELD_IPV4,
                .input_index = DST_INPUT_IPV4,
-               .offset = sizeof(struct ether_hdr) +
-                       offsetof(struct ipv4_hdr, dst_addr),
+               .offset = sizeof(struct rte_ether_hdr) +
+                       offsetof(struct rte_ipv4_hdr, dst_addr),
        },
        /*
         * Next 2 fields (src & dst ports) form 4 consecutive bytes.
@@ -130,9 +128,9 @@ static struct rte_acl_field_def ipv4_defs[NUM_FIELDS_IPV4] = {
                .size = sizeof(uint16_t),
                .field_index = SRCP_FIELD_IPV4,
                .input_index = SRCP_DESTP_INPUT_IPV4,
-               .offset = sizeof(struct ether_hdr) +
-                       sizeof(struct ipv4_hdr) +
-                       offsetof(struct tcp_hdr, src_port),
+               .offset = sizeof(struct rte_ether_hdr) +
+                       sizeof(struct rte_ipv4_hdr) +
+                       offsetof(struct rte_tcp_hdr, src_port),
        },
        {
                /* rte_flow uses a bit mask for protocol ports */
@@ -140,19 +138,21 @@ static struct rte_acl_field_def ipv4_defs[NUM_FIELDS_IPV4] = {
                .size = sizeof(uint16_t),
                .field_index = DSTP_FIELD_IPV4,
                .input_index = SRCP_DESTP_INPUT_IPV4,
-               .offset = sizeof(struct ether_hdr) +
-                       sizeof(struct ipv4_hdr) +
-                       offsetof(struct tcp_hdr, dst_port),
+               .offset = sizeof(struct rte_ether_hdr) +
+                       sizeof(struct rte_ipv4_hdr) +
+                       offsetof(struct rte_tcp_hdr, dst_port),
        },
 };
+/* >8 End of creation of ACL table. */
 
-/* flow classify data */
+/* Flow classify data. 8< */
 static int num_classify_rules;
 static struct rte_flow_classify_rule *rules[MAX_NUM_CLASSIFY];
 static struct rte_flow_classify_ipv4_5tuple_stats ntuple_stats;
 static struct rte_flow_classify_stats classify_stats = {
                .stats = (void **)&ntuple_stats
 };
+/* >8 End of flow classify data. */
 
 /* parameters for rte_flow_classify_validate and
  * rte_flow_classify_table_entry_add functions
@@ -166,7 +166,15 @@ static struct rte_flow_item  end_item = { RTE_FLOW_ITEM_TYPE_END,
 /* sample actions:
  * "actions count / end"
  */
-static struct rte_flow_action count_action = { RTE_FLOW_ACTION_TYPE_COUNT, 0};
+struct rte_flow_query_count count = {
+       .reset = 1,
+       .hits_set = 1,
+       .bytes_set = 1,
+       .hits = 0,
+       .bytes = 0,
+};
+static struct rte_flow_action count_action = { RTE_FLOW_ACTION_TYPE_COUNT,
+       &count};
 static struct rte_flow_action end_action = { RTE_FLOW_ACTION_TYPE_END, 0};
 static struct rte_flow_action actions[2];
 
@@ -179,18 +187,35 @@ static struct rte_flow_attr attr;
  * Initializes a given port using global settings and with the RX buffers
  * coming from the mbuf_pool passed as a parameter.
  */
+
+/* Initializing port using global settings. 8< */
 static inline int
 port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 {
-       struct rte_eth_conf port_conf = port_conf_default;
-       struct ether_addr addr;
+       struct rte_eth_conf port_conf;
+       struct rte_ether_addr addr;
        const uint16_t rx_rings = 1, tx_rings = 1;
        int retval;
        uint16_t q;
+       struct rte_eth_dev_info dev_info;
+       struct rte_eth_txconf txconf;
 
-       if (port >= rte_eth_dev_count())
+       if (!rte_eth_dev_is_valid_port(port))
                return -1;
 
+       memset(&port_conf, 0, sizeof(struct rte_eth_conf));
+
+       retval = rte_eth_dev_info_get(port, &dev_info);
+       if (retval != 0) {
+               printf("Error during getting device (port %u) info: %s\n",
+                               port, strerror(-retval));
+               return retval;
+       }
+
+       if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+               port_conf.txmode.offloads |=
+                       DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
        /* Configure the Ethernet device. */
        retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
        if (retval != 0)
@@ -204,48 +229,55 @@ port_init(uint8_t port, struct rte_mempool *mbuf_pool)
                        return retval;
        }
 
+       txconf = dev_info.default_txconf;
+       txconf.offloads = port_conf.txmode.offloads;
        /* Allocate and set up 1 TX queue per Ethernet port. */
        for (q = 0; q < tx_rings; q++) {
                retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
-                               rte_eth_dev_socket_id(port), NULL);
+                               rte_eth_dev_socket_id(port), &txconf);
                if (retval < 0)
                        return retval;
        }
 
-       /* Start the Ethernet port. */
+       /* Start the Ethernet port. 8< */
        retval = rte_eth_dev_start(port);
+       /* >8 End of starting the Ethernet port. */
        if (retval < 0)
                return retval;
 
        /* Display the port MAC address. */
-       rte_eth_macaddr_get(port, &addr);
+       retval = rte_eth_macaddr_get(port, &addr);
+       if (retval != 0)
+               return retval;
+
        printf("Port %u MAC: %02" PRIx8 " %02" PRIx8 " %02" PRIx8
                           " %02" PRIx8 " %02" PRIx8 " %02" PRIx8 "\n",
-                       port,
-                       addr.addr_bytes[0], addr.addr_bytes[1],
-                       addr.addr_bytes[2], addr.addr_bytes[3],
-                       addr.addr_bytes[4], addr.addr_bytes[5]);
+                       port, RTE_ETHER_ADDR_BYTES(&addr));
 
        /* Enable RX in promiscuous mode for the Ethernet device. */
-       rte_eth_promiscuous_enable(port);
+       retval = rte_eth_promiscuous_enable(port);
+       if (retval != 0)
+               return retval;
 
        return 0;
 }
+/* >8 End of initializing a given port. */
 
 /*
  * The lcore main. This is the main thread that does the work, reading from
  * an input port classifying the packets and writing to an output port.
  */
-static __attribute__((noreturn)) void
+
+/* Classifying the packets. 8< */
+static __rte_noreturn void
 lcore_main(struct flow_classifier *cls_app)
 {
-       const uint8_t nb_ports = rte_eth_dev_count();
-       uint8_t port;
+       uint16_t port;
        int ret;
        int i = 0;
 
        ret = rte_flow_classify_table_entry_delete(cls_app->cls,
-                       cls_app->table_id[0], rules[7]);
+                       rules[7]);
        if (ret)
                printf("table_entry_delete failed [7] %d\n\n", ret);
        else
@@ -255,27 +287,26 @@ lcore_main(struct flow_classifier *cls_app)
         * Check that the port is on the same NUMA node as the polling thread
         * for best performance.
         */
-       for (port = 0; port < nb_ports; port++)
-               if (rte_eth_dev_socket_id(port) > 0 &&
+       RTE_ETH_FOREACH_DEV(port)
+               if (rte_eth_dev_socket_id(port) >= 0 &&
                        rte_eth_dev_socket_id(port) != (int)rte_socket_id()) {
                        printf("\n\n");
                        printf("WARNING: port %u is on remote NUMA node\n",
                               port);
                        printf("to polling thread.\n");
                        printf("Performance will not be optimal.\n");
-
-                       printf("\nCore %u forwarding packets. ",
-                              rte_lcore_id());
-                       printf("[Ctrl+C to quit]\n");
                }
-       /* Run until the application is quit or killed. */
+       printf("\nCore %u forwarding packets. ", rte_lcore_id());
+       printf("[Ctrl+C to quit]\n");
+
+       /* Run until the application is quit or killed. 8< */
        for (;;) {
                /*
                 * Receive packets on a port, classify them and forward them
                 * on the paired port.
                 * The mapping is 0 -> 1, 1 -> 0, 2 -> 3, 3 -> 2, etc.
                 */
-               for (port = 0; port < nb_ports; port++) {
+               RTE_ETH_FOREACH_DEV(port) {
                        /* Get burst of RX packets, from first port of pair. */
                        struct rte_mbuf *bufs[BURST_SIZE];
                        const uint16_t nb_rx = rte_eth_rx_burst(port, 0,
@@ -288,7 +319,6 @@ lcore_main(struct flow_classifier *cls_app)
                                if (rules[i]) {
                                        ret = rte_flow_classifier_query(
                                                cls_app->cls,
-                                               cls_app->table_id[0],
                                                bufs, nb_rx, rules[i],
                                                &classify_stats);
                                        if (ret)
@@ -319,7 +349,9 @@ lcore_main(struct flow_classifier *cls_app)
                        }
                }
        }
+       /* >8 End of main loop. */
 }
+/* >8 End of lcore main. */
 
 /*
  * Parse IPv4 5 tuple rules file, ipv4_rules_file.txt.
@@ -364,7 +396,7 @@ parse_ipv4_net(char *in, uint32_t *addr, uint32_t *mask_len)
        if (get_cb_field(&in, &m, 0, sizeof(uint32_t) * CHAR_BIT, 0))
                return -EINVAL;
 
-       addr[0] = IPv4(a, b, c, d);
+       addr[0] = RTE_IPV4(a, b, c, d);
        mask_len[0] = m;
        return 0;
 }
@@ -605,9 +637,18 @@ add_classify_rule(struct rte_eth_ntuple_filter *ntuple_filter,
        actions[0] = count_action;
        actions[1] = end_action;
 
+       /* Validate and add rule */
+       ret = rte_flow_classify_validate(cls_app->cls, &attr,
+                       pattern_ipv4_5tuple, actions, &error);
+       if (ret) {
+               printf("table entry validate failed ipv4_proto = %u\n",
+                       ipv4_proto);
+               return ret;
+       }
+
        rule = rte_flow_classify_table_entry_add(
-                       cls_app->cls, cls_app->table_id[0], &key_found,
-                       &attr, pattern_ipv4_5tuple, actions, &error);
+                       cls_app->cls, &attr, pattern_ipv4_5tuple,
+                       actions, &key_found, &error);
        if (rule == NULL) {
                printf("table entry add failed ipv4_proto = %u\n",
                        ipv4_proto);
@@ -620,6 +661,7 @@ add_classify_rule(struct rte_eth_ntuple_filter *ntuple_filter,
        return 0;
 }
 
+/* Reads file and calls the add_classify_rule function. 8< */
 static int
 add_rules(const char *rule_path, struct flow_classifier *cls_app)
 {
@@ -667,6 +709,7 @@ add_rules(const char *rule_path, struct flow_classifier *cls_app)
        fclose(fh);
        return 0;
 }
+/* >8 End of add_rules. */
 
 /* display usage */
 static void
@@ -726,8 +769,8 @@ int
 main(int argc, char *argv[])
 {
        struct rte_mempool *mbuf_pool;
-       uint8_t nb_ports;
-       uint8_t portid;
+       uint16_t nb_ports;
+       uint16_t portid;
        int ret;
        int socket_id;
        struct rte_table_acl_params table_acl_params;
@@ -736,43 +779,47 @@ main(int argc, char *argv[])
        struct rte_flow_classifier_params cls_params;
        uint32_t size;
 
-       /* Initialize the Environment Abstraction Layer (EAL). */
+       /* Initialize the Environment Abstraction Layer (EAL). 8< */
        ret = rte_eal_init(argc, argv);
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+       /* >8 End of initialization of EAL. */
 
        argc -= ret;
        argv += ret;
 
-       /* parse application arguments (after the EAL ones) */
+       /* Parse application arguments (after the EAL ones). 8< */
        ret = parse_args(argc, argv);
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Invalid flow_classify parameters\n");
+       /* >8 End of parse application arguments. */
 
        /* Check that there is an even number of ports to send/receive on. */
-       nb_ports = rte_eth_dev_count();
+       nb_ports = rte_eth_dev_count_avail();
        if (nb_ports < 2 || (nb_ports & 1))
                rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
 
-       /* Creates a new mempool in memory to hold the mbufs. */
+       /* Creates a new mempool in memory to hold the mbufs. 8< */
        mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
                MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+       /* >8 End of creation of new mempool in memory. */
 
        if (mbuf_pool == NULL)
                rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
 
-       /* Initialize all ports. */
-       for (portid = 0; portid < nb_ports; portid++)
+       /* Initialize all ports. 8< */
+       RTE_ETH_FOREACH_DEV(portid)
                if (port_init(portid, mbuf_pool) != 0)
                        rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8 "\n",
                                        portid);
+       /* >8 End of initialization of all ports. */
 
        if (rte_lcore_count() > 1)
                printf("\nWARNING: Too many lcores enabled. Only 1 used.\n");
 
        socket_id = rte_eth_dev_socket_id(0);
 
-       /* Memory allocation */
+       /* Memory allocation. 8< */
        size = RTE_CACHE_LINE_ROUNDUP(sizeof(struct flow_classifier_acl));
        cls_app = rte_zmalloc(NULL, size, RTE_CACHE_LINE_SIZE);
        if (cls_app == NULL)
@@ -780,7 +827,6 @@ main(int argc, char *argv[])
 
        cls_params.name = "flow_classifier";
        cls_params.socket_id = socket_id;
-       cls_params.type = RTE_FLOW_CLASSIFY_TABLE_TYPE_ACL;
 
        cls_app->cls = rte_flow_classifier_create(&cls_params);
        if (cls_app->cls == NULL) {
@@ -795,29 +841,36 @@ main(int argc, char *argv[])
        memcpy(table_acl_params.field_format, ipv4_defs, sizeof(ipv4_defs));
 
        /* initialise table create params */
-       cls_table_params.ops = &rte_table_acl_ops,
-       cls_table_params.arg_create = &table_acl_params,
+       cls_table_params.ops = &rte_table_acl_ops;
+       cls_table_params.arg_create = &table_acl_params;
+       cls_table_params.type = RTE_FLOW_CLASSIFY_TABLE_ACL_IP4_5TUPLE;
 
-       ret = rte_flow_classify_table_create(cls_app->cls, &cls_table_params,
-                       &cls_app->table_id[0]);
+       ret = rte_flow_classify_table_create(cls_app->cls, &cls_table_params);
        if (ret) {
                rte_flow_classifier_free(cls_app->cls);
                rte_free(cls_app);
                rte_exit(EXIT_FAILURE, "Failed to create classifier table\n");
        }
+       /* >8 End of initialization of table create params. */
 
        /* read file of IPv4 5 tuple rules and initialize parameters
         * for rte_flow_classify_validate and rte_flow_classify_table_entry_add
         * API's.
         */
+
+       /* Read file of IPv4 tuple rules. 8< */
        if (add_rules(parm_config.rule_ipv4_name, cls_app)) {
                rte_flow_classifier_free(cls_app->cls);
                rte_free(cls_app);
                rte_exit(EXIT_FAILURE, "Failed to add rules\n");
        }
+       /* >8 End of reading file of IPv4 5 tuple rules. */
 
-       /* Call lcore_main on the master core only. */
+       /* Call lcore_main on the main core only. */
        lcore_main(cls_app);
 
+       /* clean up the EAL */
+       rte_eal_cleanup();
+
        return 0;
 }