remove useless memzone includes
[dpdk.git] / examples / ip_fragmentation / main.c
index 1b005b5..9e76e43 100644 (file)
@@ -48,9 +48,7 @@
 #include <rte_log.h>
 #include <rte_memory.h>
 #include <rte_memcpy.h>
-#include <rte_memzone.h>
 #include <rte_eal.h>
-#include <rte_per_lcore.h>
 #include <rte_launch.h>
 #include <rte_atomic.h>
 #include <rte_cycles.h>
@@ -155,7 +153,7 @@ struct rx_queue {
        struct rte_mempool *indirect_pool;
        struct rte_lpm *lpm;
        struct rte_lpm6 *lpm6;
-       uint8_t portid;
+       uint16_t portid;
 };
 
 #define MAX_RX_QUEUE_PER_LCORE 16
@@ -168,7 +166,7 @@ struct lcore_queue_conf {
 } __rte_cache_aligned;
 struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
 
-static const struct rte_eth_conf port_conf = {
+static struct rte_eth_conf port_conf = {
        .rxmode = {
                .max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
                .split_hdr_size = 0,
@@ -176,7 +174,7 @@ static const struct rte_eth_conf port_conf = {
                .hw_ip_checksum = 1, /**< IP checksum offload enabled */
                .hw_vlan_filter = 0, /**< VLAN filtering disabled */
                .jumbo_frame    = 1, /**< Jumbo Frame Support enabled */
-               .hw_strip_crc   = 0, /**< CRC stripped by hardware */
+               .hw_strip_crc   = 1, /**< CRC stripped by hardware */
        },
        .txmode = {
                .mq_mode = ETH_MQ_TX_NONE,
@@ -241,7 +239,7 @@ static struct rte_lpm6 *socket_lpm6[RTE_MAX_NUMA_NODES];
 
 /* Send burst of packets on an output interface */
 static inline int
-send_burst(struct lcore_queue_conf *qconf, uint16_t n, uint8_t port)
+send_burst(struct lcore_queue_conf *qconf, uint16_t n, uint16_t port)
 {
        struct rte_mbuf **m_table;
        int ret;
@@ -262,11 +260,12 @@ send_burst(struct lcore_queue_conf *qconf, uint16_t n, uint8_t port)
 
 static inline void
 l3fwd_simple_forward(struct rte_mbuf *m, struct lcore_queue_conf *qconf,
-               uint8_t queueid, uint8_t port_in)
+               uint8_t queueid, uint16_t port_in)
 {
        struct rx_queue *rxq;
        uint32_t i, len, next_hop;
-       uint8_t port_out, ipv6;
+       uint8_t ipv6;
+       uint16_t port_out;
        int32_t len2;
 
        ipv6 = 0;
@@ -404,7 +403,7 @@ main_loop(__attribute__((unused)) void *dummy)
        unsigned lcore_id;
        uint64_t prev_tsc, diff_tsc, cur_tsc;
        int i, j, nb_rx;
-       uint8_t portid;
+       uint16_t portid;
        struct lcore_queue_conf *qconf;
        const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
 
@@ -424,7 +423,7 @@ main_loop(__attribute__((unused)) void *dummy)
 
                portid = qconf->rx_queue_list[i].portid;
                RTE_LOG(INFO, IP_FRAG, " -- lcoreid=%u portid=%d\n", lcore_id,
-                               (int) portid);
+                               portid);
        }
 
        while (1) {
@@ -601,11 +600,12 @@ print_ethaddr(const char *name, struct ether_addr *eth_addr)
 
 /* Check the link status of all ports in up to 9s, and print them finally */
 static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
 {
 #define CHECK_INTERVAL 100 /* 100ms */
 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
-       uint8_t portid, count, all_ports_up, print_flag = 0;
+       uint16_t portid;
+       uint8_t count, all_ports_up, print_flag = 0;
        struct rte_eth_link link;
 
        printf("\nChecking link status");
@@ -620,14 +620,13 @@ check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
                        /* print link status if flag set */
                        if (print_flag == 1) {
                                if (link.link_status)
-                                       printf("Port %d Link Up - speed %u "
-                                               "Mbps - %s\n", (uint8_t)portid,
-                                               (unsigned)link.link_speed,
+                                       printf(
+                                       "Port%d Link Up .Speed %u Mbps - %s\n",
+                                               portid, link.link_speed,
                                (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
                                        ("full-duplex") : ("half-duplex\n"));
                                else
-                                       printf("Port %d Link Down\n",
-                                                       (uint8_t)portid);
+                                       printf("Port %d Link Down\n", portid);
                                continue;
                        }
                        /* clear all_ports_up flag if any link down */
@@ -654,6 +653,74 @@ check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
        }
 }
 
+/* Check L3 packet type detection capablity of the NIC port */
+static int
+check_ptype(int portid)
+{
+       int i, ret;
+       int ptype_l3_ipv4 = 0, ptype_l3_ipv6 = 0;
+       uint32_t ptype_mask = RTE_PTYPE_L3_MASK;
+
+       ret = rte_eth_dev_get_supported_ptypes(portid, ptype_mask, NULL, 0);
+       if (ret <= 0)
+               return 0;
+
+       uint32_t ptypes[ret];
+
+       ret = rte_eth_dev_get_supported_ptypes(portid, ptype_mask, ptypes, ret);
+       for (i = 0; i < ret; ++i) {
+               if (ptypes[i] & RTE_PTYPE_L3_IPV4)
+                       ptype_l3_ipv4 = 1;
+               if (ptypes[i] & RTE_PTYPE_L3_IPV6)
+                       ptype_l3_ipv6 = 1;
+       }
+
+       if (ptype_l3_ipv4 == 0)
+               printf("port %d cannot parse RTE_PTYPE_L3_IPV4\n", portid);
+
+       if (ptype_l3_ipv6 == 0)
+               printf("port %d cannot parse RTE_PTYPE_L3_IPV6\n", portid);
+
+       if (ptype_l3_ipv4 && ptype_l3_ipv6)
+               return 1;
+
+       return 0;
+
+}
+
+/* Parse packet type of a packet by SW */
+static inline void
+parse_ptype(struct rte_mbuf *m)
+{
+       struct ether_hdr *eth_hdr;
+       uint32_t packet_type = RTE_PTYPE_UNKNOWN;
+       uint16_t ether_type;
+
+       eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+       ether_type = eth_hdr->ether_type;
+       if (ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv4))
+               packet_type |= RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
+       else if (ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv6))
+               packet_type |= RTE_PTYPE_L3_IPV6_EXT_UNKNOWN;
+
+       m->packet_type = packet_type;
+}
+
+/* callback function to detect packet type for a queue of a port */
+static uint16_t
+cb_parse_ptype(uint16_t port __rte_unused, uint16_t queue __rte_unused,
+                  struct rte_mbuf *pkts[], uint16_t nb_pkts,
+                  uint16_t max_pkts __rte_unused,
+                  void *user_param __rte_unused)
+{
+       uint16_t i;
+
+       for (i = 0; i < nb_pkts; ++i)
+               parse_ptype(pkts[i]);
+
+       return nb_pkts;
+}
+
 static int
 init_routing_table(void)
 {
@@ -809,7 +876,7 @@ main(int argc, char **argv)
        uint16_t queueid = 0;
        unsigned lcore_id = 0, rx_lcore_id = 0;
        uint32_t n_tx_queue, nb_lcores;
-       uint8_t portid;
+       uint16_t portid;
 
        /* init EAL */
        ret = rte_eal_init(argc, argv);
@@ -847,6 +914,11 @@ main(int argc, char **argv)
 
                qconf = &lcore_queue_conf[rx_lcore_id];
 
+               /* limit the frame size to the maximum supported by NIC */
+               rte_eth_dev_info_get(portid, &dev_info);
+               port_conf.rxmode.max_rx_pkt_len = RTE_MIN(
+                   dev_info.max_rx_pktlen, port_conf.rxmode.max_rx_pkt_len);
+
                /* get the lcore_id for this port */
                while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
                       qconf->n_rx_queue == (unsigned)rx_queue_per_lcore) {
@@ -887,6 +959,14 @@ main(int argc, char **argv)
                                ret, portid);
                }
 
+               ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
+                                           &nb_txd);
+               if (ret < 0) {
+                       printf("\n");
+                       rte_exit(EXIT_FAILURE, "Cannot adjust number of "
+                               "descriptors: err=%d, port=%d\n", ret, portid);
+               }
+
                /* init one RX queue */
                ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
                                             socket, NULL,
@@ -912,7 +992,6 @@ main(int argc, char **argv)
                        printf("txq=%u,%d ", lcore_id, queueid);
                        fflush(stdout);
 
-                       rte_eth_dev_info_get(portid, &dev_info);
                        txconf = &dev_info.default_txconf;
                        txconf->txq_flags = 0;
                        ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
@@ -945,12 +1024,18 @@ main(int argc, char **argv)
                                ret, portid);
 
                rte_eth_promiscuous_enable(portid);
+
+               if (check_ptype(portid) == 0) {
+                       rte_eth_add_rx_callback(portid, 0, cb_parse_ptype, NULL);
+                       printf("Add Rx callback function to detect L3 packet type by SW :"
+                               " port = %d\n", portid);
+               }
        }
 
        if (init_routing_table() < 0)
                rte_exit(EXIT_FAILURE, "Cannot init routing table\n");
 
-       check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask);
+       check_all_ports_link_status(nb_ports, enabled_port_mask);
 
        /* launch per-lcore init on every lcore */
        rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);