* Copyright(c) 2016 Intel Corporation
*/
+#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <sys/queue.h>
#include <stdarg.h>
#include <errno.h>
+#include <signal.h>
#include <getopt.h>
#include <rte_common.h>
+#include <rte_bitmap.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_eal.h>
#include <rte_jhash.h>
#include <rte_cryptodev.h>
#include <rte_security.h>
+#include <rte_eventdev.h>
#include <rte_ip.h>
#include <rte_ip_frag.h>
+#include "event_helper.h"
#include "ipsec.h"
#include "parser.h"
+#include "sad.h"
+
+volatile bool force_quit;
#define RTE_LOGTYPE_IPSEC RTE_LOGTYPE_USER1
0, 0)
#define FRAG_TBL_BUCKET_ENTRIES 4
-#define FRAG_TTL_MS (10 * MS_PER_S)
+#define MAX_FRAG_TTL_NS (10LL * NS_PER_S)
#define MTU_TO_FRAMELEN(x) ((x) + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN)
{ 0, ETHADDR(0x00, 0x16, 0x3e, 0x49, 0x9e, 0xdd) }
};
+struct flow_info flow_info_tbl[RTE_MAX_ETHPORTS];
+
#define CMD_LINE_OPT_CONFIG "config"
#define CMD_LINE_OPT_SINGLE_SA "single-sa"
#define CMD_LINE_OPT_CRYPTODEV_MASK "cryptodev_mask"
+#define CMD_LINE_OPT_TRANSFER_MODE "transfer-mode"
+#define CMD_LINE_OPT_SCHEDULE_TYPE "event-schedule-type"
#define CMD_LINE_OPT_RX_OFFLOAD "rxoffload"
#define CMD_LINE_OPT_TX_OFFLOAD "txoffload"
#define CMD_LINE_OPT_REASSEMBLE "reassemble"
#define CMD_LINE_OPT_MTU "mtu"
+#define CMD_LINE_OPT_FRAG_TTL "frag-ttl"
+
+#define CMD_LINE_ARG_EVENT "event"
+#define CMD_LINE_ARG_POLL "poll"
+#define CMD_LINE_ARG_ORDERED "ordered"
+#define CMD_LINE_ARG_ATOMIC "atomic"
+#define CMD_LINE_ARG_PARALLEL "parallel"
enum {
/* long options mapped to a short option */
CMD_LINE_OPT_CONFIG_NUM,
CMD_LINE_OPT_SINGLE_SA_NUM,
CMD_LINE_OPT_CRYPTODEV_MASK_NUM,
+ CMD_LINE_OPT_TRANSFER_MODE_NUM,
+ CMD_LINE_OPT_SCHEDULE_TYPE_NUM,
CMD_LINE_OPT_RX_OFFLOAD_NUM,
CMD_LINE_OPT_TX_OFFLOAD_NUM,
CMD_LINE_OPT_REASSEMBLE_NUM,
CMD_LINE_OPT_MTU_NUM,
+ CMD_LINE_OPT_FRAG_TTL_NUM,
};
static const struct option lgopts[] = {
{CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
{CMD_LINE_OPT_SINGLE_SA, 1, 0, CMD_LINE_OPT_SINGLE_SA_NUM},
{CMD_LINE_OPT_CRYPTODEV_MASK, 1, 0, CMD_LINE_OPT_CRYPTODEV_MASK_NUM},
+ {CMD_LINE_OPT_TRANSFER_MODE, 1, 0, CMD_LINE_OPT_TRANSFER_MODE_NUM},
+ {CMD_LINE_OPT_SCHEDULE_TYPE, 1, 0, CMD_LINE_OPT_SCHEDULE_TYPE_NUM},
{CMD_LINE_OPT_RX_OFFLOAD, 1, 0, CMD_LINE_OPT_RX_OFFLOAD_NUM},
{CMD_LINE_OPT_TX_OFFLOAD, 1, 0, CMD_LINE_OPT_TX_OFFLOAD_NUM},
{CMD_LINE_OPT_REASSEMBLE, 1, 0, CMD_LINE_OPT_REASSEMBLE_NUM},
{CMD_LINE_OPT_MTU, 1, 0, CMD_LINE_OPT_MTU_NUM},
+ {CMD_LINE_OPT_FRAG_TTL, 1, 0, CMD_LINE_OPT_FRAG_TTL_NUM},
{NULL, 0, 0, 0}
};
static uint32_t frag_tbl_sz;
static uint32_t frame_buf_size = RTE_MBUF_DEFAULT_BUF_SIZE;
static uint32_t mtu_size = RTE_ETHER_MTU;
+static uint64_t frag_ttl_ns = MAX_FRAG_TTL_NS;
/* application wide librte_ipsec/SA parameters */
-struct app_sa_prm app_sa_prm = {.enable = 0};
+struct app_sa_prm app_sa_prm = {
+ .enable = 0,
+ .cache_sz = SA_CACHE_SZ
+ };
+static const char *cfgfile;
struct lcore_rx_queue {
uint16_t port_id;
}
pkt->l2_len = 0;
pkt->l3_len = sizeof(*iph4);
+ pkt->packet_type |= RTE_PTYPE_L3_IPV4;
} else if (eth->ether_type == rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV6)) {
int next_proto;
size_t l3len, ext_len;
}
pkt->l2_len = 0;
pkt->l3_len = l3len;
+ pkt->packet_type |= RTE_PTYPE_L3_IPV6;
} else {
/* Unknown/Unsupported type, drop the packet */
RTE_LOG(ERR, IPSEC, "Unsupported packet type 0x%x\n",
len++;
/* need to fragment the packet */
- } else
+ } else if (frag_tbl_sz > 0)
len = send_fragment_packet(qconf, m, port, proto);
+ else
+ rte_pktmbuf_free(m);
/* enough pkts to be sent */
if (unlikely(len == MAX_PKT_BURST)) {
continue;
}
- sa_idx = SPI2IDX(res);
+ sa_idx = res - 1;
if (!inbound_sa_check(sa, m, sa_idx)) {
rte_pktmbuf_free(m);
continue;
j = 0;
for (i = 0; i < ip->num; i++) {
m = ip->pkts[i];
- sa_idx = SPI2IDX(ip->res[i]);
+ sa_idx = ip->res[i] - 1;
if (ip->res[i] == DISCARD)
rte_pktmbuf_free(m);
else if (ip->res[i] == BYPASS)
uint16_t portid;
uint8_t queueid;
struct lcore_conf *qconf;
- int32_t socket_id;
+ int32_t rc, socket_id;
const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1)
/ US_PER_S * BURST_TX_DRAIN_US;
struct lcore_rx_queue *rxql;
qconf->frag.pool_dir = socket_ctx[socket_id].mbuf_pool;
qconf->frag.pool_indir = socket_ctx[socket_id].mbuf_pool_indir;
+ rc = ipsec_sad_lcore_cache_init(app_sa_prm.cache_sz);
+ if (rc != 0) {
+ RTE_LOG(ERR, IPSEC,
+ "SAD cache init on lcore %u, failed with code: %d\n",
+ lcore_id, rc);
+ return rc;
+ }
+
if (qconf->nb_rx_queue == 0) {
RTE_LOG(DEBUG, IPSEC, "lcore %u has nothing to do\n",
lcore_id);
}
static int32_t
-check_params(void)
+check_poll_mode_params(struct eh_conf *eh_conf)
{
uint8_t lcore;
uint16_t portid;
uint16_t i;
int32_t socket_id;
+ if (!eh_conf)
+ return -EINVAL;
+
+ if (eh_conf->mode != EH_PKT_TRANSFER_MODE_POLL)
+ return 0;
+
if (lcore_params == NULL) {
printf("Error: No port/queue/core mappings\n");
return -1;
" [-w REPLAY_WINDOW_SIZE]"
" [-e]"
" [-a]"
+ " [-c]"
" -f CONFIG_FILE"
" --config (port,queue,lcore)[,(port,queue,lcore)]"
" [--single-sa SAIDX]"
" [--cryptodev_mask MASK]"
+ " [--transfer-mode MODE]"
+ " [--event-schedule-type TYPE]"
" [--" CMD_LINE_OPT_RX_OFFLOAD " RX_OFFLOAD_MASK]"
" [--" CMD_LINE_OPT_TX_OFFLOAD " TX_OFFLOAD_MASK]"
" [--" CMD_LINE_OPT_REASSEMBLE " REASSEMBLE_TABLE_SIZE]"
" size for each SA\n"
" -e enables ESN\n"
" -a enables SA SQN atomic behaviour\n"
+ " -c specifies inbound SAD cache size,\n"
+ " zero value disables the cache (default value: 128)\n"
" -f CONFIG_FILE: Configuration file\n"
- " --config (port,queue,lcore): Rx queue configuration\n"
+ " --config (port,queue,lcore): Rx queue configuration. In poll\n"
+ " mode determines which queues from\n"
+ " which ports are mapped to which cores.\n"
+ " In event mode this option is not used\n"
+ " as packets are dynamically scheduled\n"
+ " to cores by HW.\n"
" --single-sa SAIDX: Use single SA index for outbound traffic,\n"
" bypassing the SP\n"
" --cryptodev_mask MASK: Hexadecimal bitmask of the crypto\n"
" devices to configure\n"
+ " --transfer-mode MODE\n"
+ " \"poll\" : Packet transfer via polling (default)\n"
+ " \"event\" : Packet transfer via event device\n"
+ " --event-schedule-type TYPE queue schedule type, used only when\n"
+ " transfer mode is set to event\n"
+ " \"ordered\" : Ordered (default)\n"
+ " \"atomic\" : Atomic\n"
+ " \"parallel\" : Parallel\n"
" --" CMD_LINE_OPT_RX_OFFLOAD
": bitmask of the RX HW offload capabilities to enable/use\n"
" (DEV_RX_OFFLOAD_*)\n"
": MTU value on all ports (default value: 1500)\n"
" outgoing packets with bigger size will be fragmented\n"
" incoming packets with bigger size will be discarded\n"
+ " --" CMD_LINE_OPT_FRAG_TTL " FRAG_TTL_NS"
+ ": fragments lifetime in nanoseconds, default\n"
+ " and maximum value is 10.000.000.000 ns (10 s)\n"
"\n",
prgname);
}
return pm;
}
-static int32_t
+static int64_t
parse_decimal(const char *str)
{
char *end = NULL;
- unsigned long num;
+ uint64_t num;
- num = strtoul(str, &end, 10);
- if ((str[0] == '\0') || (end == NULL) || (*end != '\0'))
+ num = strtoull(str, &end, 10);
+ if ((str[0] == '\0') || (end == NULL) || (*end != '\0')
+ || num > INT64_MAX)
return -1;
return num;
printf("librte_ipsec usage: %s\n",
(prm->enable == 0) ? "disabled" : "enabled");
- if (prm->enable == 0)
- return;
-
printf("replay window size: %u\n", prm->window_size);
printf("ESN: %s\n", (prm->enable_esn == 0) ? "disabled" : "enabled");
printf("SA flags: %#" PRIx64 "\n", prm->flags);
+ printf("Frag TTL: %" PRIu64 " ns\n", frag_ttl_ns);
+}
+
+static int
+parse_transfer_mode(struct eh_conf *conf, const char *optarg)
+{
+ if (!strcmp(CMD_LINE_ARG_POLL, optarg))
+ conf->mode = EH_PKT_TRANSFER_MODE_POLL;
+ else if (!strcmp(CMD_LINE_ARG_EVENT, optarg))
+ conf->mode = EH_PKT_TRANSFER_MODE_EVENT;
+ else {
+ printf("Unsupported packet transfer mode\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+parse_schedule_type(struct eh_conf *conf, const char *optarg)
+{
+ struct eventmode_conf *em_conf = NULL;
+
+ /* Get eventmode conf */
+ em_conf = conf->mode_params;
+
+ if (!strcmp(CMD_LINE_ARG_ORDERED, optarg))
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ORDERED;
+ else if (!strcmp(CMD_LINE_ARG_ATOMIC, optarg))
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ATOMIC;
+ else if (!strcmp(CMD_LINE_ARG_PARALLEL, optarg))
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_PARALLEL;
+ else {
+ printf("Unsupported queue schedule type\n");
+ return -EINVAL;
+ }
+
+ return 0;
}
static int32_t
-parse_args(int32_t argc, char **argv)
+parse_args(int32_t argc, char **argv, struct eh_conf *eh_conf)
{
- int32_t opt, ret;
+ int opt;
+ int64_t ret;
char **argvopt;
int32_t option_index;
char *prgname = argv[0];
argvopt = argv;
- while ((opt = getopt_long(argc, argvopt, "aelp:Pu:f:j:w:",
+ while ((opt = getopt_long(argc, argvopt, "aelp:Pu:f:j:w:c:",
lgopts, &option_index)) != EOF) {
switch (opt) {
print_usage(prgname);
return -1;
}
- if (parse_cfg_file(optarg) < 0) {
- printf("parsing file \"%s\" failed\n",
- optarg);
- print_usage(prgname);
- return -1;
- }
+ cfgfile = optarg;
f_present = 1;
break;
case 'j':
app_sa_prm.enable = 1;
break;
case 'w':
- app_sa_prm.enable = 1;
app_sa_prm.window_size = parse_decimal(optarg);
break;
case 'e':
- app_sa_prm.enable = 1;
app_sa_prm.enable_esn = 1;
break;
case 'a':
app_sa_prm.enable = 1;
app_sa_prm.flags |= RTE_IPSEC_SAFLAG_SQN_ATOM;
break;
+ case 'c':
+ ret = parse_decimal(optarg);
+ if (ret < 0) {
+ printf("Invalid SA cache size: %s\n", optarg);
+ print_usage(prgname);
+ return -1;
+ }
+ app_sa_prm.cache_sz = ret;
+ break;
case CMD_LINE_OPT_CONFIG_NUM:
ret = parse_config(optarg);
if (ret) {
break;
case CMD_LINE_OPT_SINGLE_SA_NUM:
ret = parse_decimal(optarg);
- if (ret == -1) {
+ if (ret == -1 || ret > UINT32_MAX) {
printf("Invalid argument[sa_idx]\n");
print_usage(prgname);
return -1;
/* else */
single_sa = 1;
single_sa_idx = ret;
+ eh_conf->ipsec_mode = EH_IPSEC_MODE_TYPE_DRIVER;
printf("Configured with single SA index %u\n",
single_sa_idx);
break;
/* else */
enabled_cryptodev_mask = ret;
break;
+
+ case CMD_LINE_OPT_TRANSFER_MODE_NUM:
+ ret = parse_transfer_mode(eh_conf, optarg);
+ if (ret < 0) {
+ printf("Invalid packet transfer mode\n");
+ print_usage(prgname);
+ return -1;
+ }
+ break;
+
+ case CMD_LINE_OPT_SCHEDULE_TYPE_NUM:
+ ret = parse_schedule_type(eh_conf, optarg);
+ if (ret < 0) {
+ printf("Invalid queue schedule type\n");
+ print_usage(prgname);
+ return -1;
+ }
+ break;
+
case CMD_LINE_OPT_RX_OFFLOAD_NUM:
ret = parse_mask(optarg, &dev_rx_offload);
if (ret != 0) {
break;
case CMD_LINE_OPT_REASSEMBLE_NUM:
ret = parse_decimal(optarg);
- if (ret < 0) {
+ if (ret < 0 || ret > UINT32_MAX) {
printf("Invalid argument for \'%s\': %s\n",
CMD_LINE_OPT_REASSEMBLE, optarg);
print_usage(prgname);
}
mtu_size = ret;
break;
+ case CMD_LINE_OPT_FRAG_TTL_NUM:
+ ret = parse_decimal(optarg);
+ if (ret < 0 || ret > MAX_FRAG_TTL_NS) {
+ printf("Invalid argument for \'%s\': %s\n",
+ CMD_LINE_OPT_MTU, optarg);
+ print_usage(prgname);
+ return -1;
+ }
+ frag_ttl_ns = ret;
+ break;
default:
print_usage(prgname);
return -1;
uint16_t portid;
uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
+ int ret;
printf("\nChecking link status");
fflush(stdout);
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(portid, &link);
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
struct rte_ether_addr ethaddr;
struct rte_eth_conf local_port_conf = port_conf;
- rte_eth_dev_info_get(portid, &dev_info);
+ ret = rte_eth_dev_info_get(portid, &dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error during getting device (port %u) info: %s\n",
+ portid, strerror(-ret));
/* limit allowed HW offloafs, as user requested */
dev_info.rx_offload_capa &= dev_rx_offload;
printf("Configuring device port %u:\n", portid);
- rte_eth_macaddr_get(portid, ðaddr);
+ ret = rte_eth_macaddr_get(portid, ðaddr);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error getting MAC address (port %u): %s\n",
+ portid, rte_strerror(-ret));
+
ethaddr_tbl[portid].src = ETHADDR_TO_UINT64(ðaddr);
print_ethaddr("Address: ", ðaddr);
printf("\n");
/* create fragment table */
sid = rte_lcore_to_socket_id(cid);
- frag_cycles = (rte_get_tsc_hz() + MS_PER_S - 1) /
- MS_PER_S * FRAG_TTL_MS;
+ frag_cycles = (rte_get_tsc_hz() + NS_PER_S - 1) /
+ NS_PER_S * frag_ttl_ns;
lc->frag.tbl = rte_ip_frag_table_create(frag_tbl_sz,
FRAG_TBL_BUCKET_ENTRIES, frag_tbl_sz, frag_cycles, sid);
return rc;
}
+static void
+create_default_ipsec_flow(uint16_t port_id, uint64_t rx_offloads)
+{
+ struct rte_flow_action action[2];
+ struct rte_flow_item pattern[2];
+ struct rte_flow_attr attr = {0};
+ struct rte_flow_error err;
+ struct rte_flow *flow;
+ int ret;
+
+ if (!(rx_offloads & DEV_RX_OFFLOAD_SECURITY))
+ return;
+
+ /* Add the default rte_flow to enable SECURITY for all ESP packets */
+
+ pattern[0].type = RTE_FLOW_ITEM_TYPE_ESP;
+ pattern[0].spec = NULL;
+ pattern[0].mask = NULL;
+ pattern[0].last = NULL;
+ pattern[1].type = RTE_FLOW_ITEM_TYPE_END;
+
+ action[0].type = RTE_FLOW_ACTION_TYPE_SECURITY;
+ action[0].conf = NULL;
+ action[1].type = RTE_FLOW_ACTION_TYPE_END;
+ action[1].conf = NULL;
+
+ attr.ingress = 1;
+
+ ret = rte_flow_validate(port_id, &attr, pattern, action, &err);
+ if (ret)
+ return;
+
+ flow = rte_flow_create(port_id, &attr, pattern, action, &err);
+ if (flow == NULL)
+ return;
+
+ flow_info_tbl[port_id].rx_def_flow = flow;
+ RTE_LOG(INFO, IPSEC,
+ "Created default flow enabling SECURITY for all ESP traffic on port %d\n",
+ port_id);
+}
+
+static void
+signal_handler(int signum)
+{
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\n\nSignal %d received, preparing to exit...\n",
+ signum);
+ force_quit = true;
+ }
+}
+
+static void
+ev_mode_sess_verify(struct ipsec_sa *sa, int nb_sa)
+{
+ struct rte_ipsec_session *ips;
+ int32_t i;
+
+ if (!sa || !nb_sa)
+ return;
+
+ for (i = 0; i < nb_sa; i++) {
+ ips = ipsec_get_primary_session(&sa[i]);
+ if (ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL)
+ rte_exit(EXIT_FAILURE, "Event mode supports only "
+ "inline protocol sessions\n");
+ }
+
+}
+
+static int32_t
+check_event_mode_params(struct eh_conf *eh_conf)
+{
+ struct eventmode_conf *em_conf = NULL;
+ struct lcore_params *params;
+ uint16_t portid;
+
+ if (!eh_conf || !eh_conf->mode_params)
+ return -EINVAL;
+
+ /* Get eventmode conf */
+ em_conf = eh_conf->mode_params;
+
+ if (eh_conf->mode == EH_PKT_TRANSFER_MODE_POLL &&
+ em_conf->ext_params.sched_type != SCHED_TYPE_NOT_SET) {
+ printf("error: option --event-schedule-type applies only to "
+ "event mode\n");
+ return -EINVAL;
+ }
+
+ if (eh_conf->mode != EH_PKT_TRANSFER_MODE_EVENT)
+ return 0;
+
+ /* Set schedule type to ORDERED if it wasn't explicitly set by user */
+ if (em_conf->ext_params.sched_type == SCHED_TYPE_NOT_SET)
+ em_conf->ext_params.sched_type = RTE_SCHED_TYPE_ORDERED;
+
+ /*
+ * Event mode currently supports only inline protocol sessions.
+ * If there are other types of sessions configured then exit with
+ * error.
+ */
+ ev_mode_sess_verify(sa_in, nb_sa_in);
+ ev_mode_sess_verify(sa_out, nb_sa_out);
+
+
+ /* Option --config does not apply to event mode */
+ if (nb_lcore_params > 0) {
+ printf("error: option --config applies only to poll mode\n");
+ return -EINVAL;
+ }
+
+ /*
+ * In order to use the same port_init routine for both poll and event
+ * modes initialize lcore_params with one queue for each eth port
+ */
+ lcore_params = lcore_params_array;
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((enabled_port_mask & (1 << portid)) == 0)
+ continue;
+
+ params = &lcore_params[nb_lcore_params++];
+ params->port_id = portid;
+ params->queue_id = 0;
+ params->lcore_id = rte_get_next_lcore(0, 0, 1);
+ }
+
+ return 0;
+}
+
+static void
+inline_sessions_free(struct sa_ctx *sa_ctx)
+{
+ struct rte_ipsec_session *ips;
+ struct ipsec_sa *sa;
+ int32_t ret;
+ uint32_t i;
+
+ if (!sa_ctx)
+ return;
+
+ for (i = 0; i < sa_ctx->nb_sa; i++) {
+
+ sa = &sa_ctx->sa[i];
+ if (!sa->spi)
+ continue;
+
+ ips = ipsec_get_primary_session(sa);
+ if (ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL &&
+ ips->type != RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO)
+ continue;
+
+ if (!rte_eth_dev_is_valid_port(sa->portid))
+ continue;
+
+ ret = rte_security_session_destroy(
+ rte_eth_dev_get_sec_ctx(sa->portid),
+ ips->security.ses);
+ if (ret)
+ RTE_LOG(ERR, IPSEC, "Failed to destroy security "
+ "session type %d, spi %d\n",
+ ips->type, sa->spi);
+ }
+}
+
int32_t
main(int32_t argc, char **argv)
{
int32_t ret;
uint32_t lcore_id;
+ uint32_t cdev_id;
uint32_t i;
uint8_t socket_id;
uint16_t portid;
- uint64_t req_rx_offloads, req_tx_offloads;
+ uint64_t req_rx_offloads[RTE_MAX_ETHPORTS];
+ uint64_t req_tx_offloads[RTE_MAX_ETHPORTS];
+ struct eh_conf *eh_conf = NULL;
size_t sess_sz;
/* init EAL */
argc -= ret;
argv += ret;
+ force_quit = false;
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
+ /* initialize event helper configuration */
+ eh_conf = eh_conf_init();
+ if (eh_conf == NULL)
+ rte_exit(EXIT_FAILURE, "Failed to init event helper config");
+
/* parse application arguments (after the EAL ones) */
- ret = parse_args(argc, argv);
+ ret = parse_args(argc, argv, eh_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid parameters\n");
+ /* parse configuration file */
+ if (parse_cfg_file(cfgfile) < 0) {
+ printf("parsing file \"%s\" failed\n",
+ optarg);
+ print_usage(argv[0]);
+ return -1;
+ }
+
if ((unprotected_port_mask & enabled_port_mask) !=
unprotected_port_mask)
rte_exit(EXIT_FAILURE, "Invalid unprotected portmask 0x%x\n",
unprotected_port_mask);
- if (check_params() < 0)
- rte_exit(EXIT_FAILURE, "check_params failed\n");
+ if (check_poll_mode_params(eh_conf) < 0)
+ rte_exit(EXIT_FAILURE, "check_poll_mode_params failed\n");
+
+ if (check_event_mode_params(eh_conf) < 0)
+ rte_exit(EXIT_FAILURE, "check_event_mode_params failed\n");
ret = init_lcore_rx_queues();
if (ret < 0)
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
- sa_check_offloads(portid, &req_rx_offloads, &req_tx_offloads);
- port_init(portid, req_rx_offloads, req_tx_offloads);
+ sa_check_offloads(portid, &req_rx_offloads[portid],
+ &req_tx_offloads[portid]);
+ port_init(portid, req_rx_offloads[portid],
+ req_tx_offloads[portid]);
}
cryptodevs_init();
+ /*
+ * Set the enabled port mask in helper config for use by helper
+ * sub-system. This will be used while initializing devices using
+ * helper sub-system.
+ */
+ eh_conf->eth_portmask = enabled_port_mask;
+
+ /* Initialize eventmode components */
+ ret = eh_devs_init(eh_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "eh_devs_init failed, err=%d\n", ret);
+
/* start ports */
RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
- /*
- * Start device
- * note: device must be started before a flow rule
- * can be installed.
- */
+ /* Create flow before starting the device */
+ create_default_ipsec_flow(portid, req_rx_offloads[portid]);
+
ret = rte_eth_dev_start(portid);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_dev_start: "
* to itself through 2 cross-connected ports of the
* target machine.
*/
- if (promiscuous_on)
- rte_eth_promiscuous_enable(portid);
+ if (promiscuous_on) {
+ ret = rte_eth_promiscuous_enable(portid);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_promiscuous_enable: err=%s, port=%d\n",
+ rte_strerror(-ret), portid);
+ }
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_IPSEC, inline_ipsec_event_callback, NULL);
return -1;
}
+ /* Uninitialize eventmode components */
+ ret = eh_devs_uninit(eh_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "eh_devs_uninit failed, err=%d\n", ret);
+
+ /* Free eventmode configuration memory */
+ eh_conf_uninit(eh_conf);
+
+ /* Destroy inline inbound and outbound sessions */
+ for (i = 0; i < NB_SOCKETS && i < rte_socket_count(); i++) {
+ socket_id = rte_socket_id_by_idx(i);
+ inline_sessions_free(socket_ctx[socket_id].sa_in);
+ inline_sessions_free(socket_ctx[socket_id].sa_out);
+ }
+
+ for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
+ printf("Closing cryptodev %d...", cdev_id);
+ rte_cryptodev_stop(cdev_id);
+ rte_cryptodev_close(cdev_id);
+ printf(" Done\n");
+ }
+
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((enabled_port_mask & (1 << portid)) == 0)
+ continue;
+
+ printf("Closing port %d...", portid);
+ if (flow_info_tbl[portid].rx_def_flow) {
+ struct rte_flow_error err;
+
+ ret = rte_flow_destroy(portid,
+ flow_info_tbl[portid].rx_def_flow, &err);
+ if (ret)
+ RTE_LOG(ERR, IPSEC, "Failed to destroy flow "
+ " for port %u, err msg: %s\n", portid,
+ err.message);
+ }
+ rte_eth_dev_stop(portid);
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
+ printf("Bye...\n");
+
return 0;
}
git.droids-corp.org / dpdk.git / blobdiff