examples: remove extra new line after link duplex
[dpdk.git] / examples / l2fwd / main.c
index c5e88ff..f8d14b8 100644 (file)
@@ -46,8 +46,6 @@ static int mac_updating = 1;
 
 #define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
 
-#define NB_MBUF   8192
-
 #define MAX_PKT_BURST 32
 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
 #define MEMPOOL_CACHE_SIZE 256
@@ -55,13 +53,13 @@ static int mac_updating = 1;
 /*
  * Configurable number of RX/TX ring descriptors
  */
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
 
 /* ethernet addresses of ports */
-static struct ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
 
 /* mask of enabled ports */
 static uint32_t l2fwd_enabled_port_mask = 0;
@@ -81,14 +79,9 @@ struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
 
 static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
 
-static const struct rte_eth_conf port_conf = {
+static struct rte_eth_conf port_conf = {
        .rxmode = {
                .split_hdr_size = 0,
-               .header_split   = 0, /**< Header Split disabled */
-               .hw_ip_checksum = 0, /**< IP checksum offload disabled */
-               .hw_vlan_filter = 0, /**< VLAN filtering disabled */
-               .jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
-               .hw_strip_crc   = 1, /**< CRC stripped by hardware */
        },
        .txmode = {
                .mq_mode = ETH_MQ_TX_NONE,
@@ -158,17 +151,17 @@ print_stats(void)
 static void
 l2fwd_mac_updating(struct rte_mbuf *m, unsigned dest_portid)
 {
-       struct ether_hdr *eth;
+       struct rte_ether_hdr *eth;
        void *tmp;
 
-       eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+       eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
 
        /* 02:00:00:00:00:xx */
        tmp = &eth->d_addr.addr_bytes[0];
        *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dest_portid << 40);
 
        /* src addr */
-       ether_addr_copy(&l2fwd_ports_eth_addr[dest_portid], &eth->s_addr);
+       rte_ether_addr_copy(&l2fwd_ports_eth_addr[dest_portid], &eth->s_addr);
 }
 
 static void
@@ -288,7 +281,7 @@ l2fwd_main_loop(void)
 }
 
 static int
-l2fwd_launch_one_lcore(__attribute__((unused)) void *dummy)
+l2fwd_launch_one_lcore(__rte_unused void *dummy)
 {
        l2fwd_main_loop();
        return 0;
@@ -449,13 +442,14 @@ l2fwd_parse_args(int argc, char **argv)
 
 /* Check the link status of all ports in up to 9s, and print them finally */
 static void
-check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
 {
 #define CHECK_INTERVAL 100 /* 100ms */
 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
        uint16_t portid;
        uint8_t count, all_ports_up, print_flag = 0;
        struct rte_eth_link link;
+       int ret;
 
        printf("\nChecking link status");
        fflush(stdout);
@@ -463,13 +457,20 @@ check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
                if (force_quit)
                        return;
                all_ports_up = 1;
-               for (portid = 0; portid < port_num; portid++) {
+               RTE_ETH_FOREACH_DEV(portid) {
                        if (force_quit)
                                return;
                        if ((port_mask & (1 << portid)) == 0)
                                continue;
                        memset(&link, 0, sizeof(link));
-                       rte_eth_link_get_nowait(portid, &link);
+                       ret = rte_eth_link_get_nowait(portid, &link);
+                       if (ret < 0) {
+                               all_ports_up = 0;
+                               if (print_flag == 1)
+                                       printf("Port %u link get failed: %s\n",
+                                               portid, rte_strerror(-ret));
+                               continue;
+                       }
                        /* print link status if flag set */
                        if (print_flag == 1) {
                                if (link.link_status)
@@ -477,7 +478,7 @@ check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
                                        "Port%d Link Up. Speed %u Mbps - %s\n",
                                                portid, link.link_speed,
                                (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
-                                       ("full-duplex") : ("half-duplex\n"));
+                                       ("full-duplex") : ("half-duplex"));
                                else
                                        printf("Port %d Link Down\n", portid);
                                continue;
@@ -520,13 +521,14 @@ int
 main(int argc, char **argv)
 {
        struct lcore_queue_conf *qconf;
-       struct rte_eth_dev_info dev_info;
        int ret;
        uint16_t nb_ports;
-       uint16_t nb_ports_available;
+       uint16_t nb_ports_available = 0;
        uint16_t portid, last_port;
        unsigned lcore_id, rx_lcore_id;
        unsigned nb_ports_in_mask = 0;
+       unsigned int nb_lcores = 0;
+       unsigned int nb_mbufs;
 
        /* init EAL */
        ret = rte_eal_init(argc, argv);
@@ -549,17 +551,15 @@ main(int argc, char **argv)
        /* convert to number of cycles */
        timer_period *= rte_get_timer_hz();
 
-       /* create the mbuf pool */
-       l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF,
-               MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
-               rte_socket_id());
-       if (l2fwd_pktmbuf_pool == NULL)
-               rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
-
-       nb_ports = rte_eth_dev_count();
+       nb_ports = rte_eth_dev_count_avail();
        if (nb_ports == 0)
                rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
 
+       /* check port mask to possible port mask */
+       if (l2fwd_enabled_port_mask & ~((1 << nb_ports) - 1))
+               rte_exit(EXIT_FAILURE, "Invalid portmask; possible (0x%x)\n",
+                       (1 << nb_ports) - 1);
+
        /* reset l2fwd_dst_ports */
        for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
                l2fwd_dst_ports[portid] = 0;
@@ -568,7 +568,7 @@ main(int argc, char **argv)
        /*
         * Each logical core is assigned a dedicated TX queue on each port.
         */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                /* skip ports that are not enabled */
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
                        continue;
@@ -581,8 +581,6 @@ main(int argc, char **argv)
                        last_port = portid;
 
                nb_ports_in_mask++;
-
-               rte_eth_dev_info_get(portid, &dev_info);
        }
        if (nb_ports_in_mask % 2) {
                printf("Notice: odd number of ports in portmask.\n");
@@ -593,7 +591,7 @@ main(int argc, char **argv)
        qconf = NULL;
 
        /* Initialize the port/queue configuration of each logical core */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                /* skip ports that are not enabled */
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
                        continue;
@@ -607,29 +605,55 @@ main(int argc, char **argv)
                                rte_exit(EXIT_FAILURE, "Not enough cores\n");
                }
 
-               if (qconf != &lcore_queue_conf[rx_lcore_id])
+               if (qconf != &lcore_queue_conf[rx_lcore_id]) {
                        /* Assigned a new logical core in the loop above. */
                        qconf = &lcore_queue_conf[rx_lcore_id];
+                       nb_lcores++;
+               }
 
                qconf->rx_port_list[qconf->n_rx_port] = portid;
                qconf->n_rx_port++;
                printf("Lcore %u: RX port %u\n", rx_lcore_id, portid);
        }
 
-       nb_ports_available = nb_ports;
+       nb_mbufs = RTE_MAX(nb_ports * (nb_rxd + nb_txd + MAX_PKT_BURST +
+               nb_lcores * MEMPOOL_CACHE_SIZE), 8192U);
+
+       /* create the mbuf pool */
+       l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
+               MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
+               rte_socket_id());
+       if (l2fwd_pktmbuf_pool == NULL)
+               rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
 
        /* Initialise each port */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
+               struct rte_eth_rxconf rxq_conf;
+               struct rte_eth_txconf txq_conf;
+               struct rte_eth_conf local_port_conf = port_conf;
+               struct rte_eth_dev_info dev_info;
+
                /* skip ports that are not enabled */
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0) {
                        printf("Skipping disabled port %u\n", portid);
-                       nb_ports_available--;
                        continue;
                }
+               nb_ports_available++;
+
                /* init port */
                printf("Initializing port %u... ", portid);
                fflush(stdout);
-               ret = rte_eth_dev_configure(portid, 1, 1, &port_conf);
+
+               ret = rte_eth_dev_info_get(portid, &dev_info);
+               if (ret != 0)
+                       rte_exit(EXIT_FAILURE,
+                               "Error during getting device (port %u) info: %s\n",
+                               portid, strerror(-ret));
+
+               if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+                       local_port_conf.txmode.offloads |=
+                               DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+               ret = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
                                  ret, portid);
@@ -641,13 +665,20 @@ main(int argc, char **argv)
                                 "Cannot adjust number of descriptors: err=%d, port=%u\n",
                                 ret, portid);
 
-               rte_eth_macaddr_get(portid,&l2fwd_ports_eth_addr[portid]);
+               ret = rte_eth_macaddr_get(portid,
+                                         &l2fwd_ports_eth_addr[portid]);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE,
+                                "Cannot get MAC address: err=%d, port=%u\n",
+                                ret, portid);
 
                /* init one RX queue */
                fflush(stdout);
+               rxq_conf = dev_info.default_rxconf;
+               rxq_conf.offloads = local_port_conf.rxmode.offloads;
                ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
                                             rte_eth_dev_socket_id(portid),
-                                            NULL,
+                                            &rxq_conf,
                                             l2fwd_pktmbuf_pool);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup:err=%d, port=%u\n",
@@ -655,9 +686,11 @@ main(int argc, char **argv)
 
                /* init one TX queue on each port */
                fflush(stdout);
+               txq_conf = dev_info.default_txconf;
+               txq_conf.offloads = local_port_conf.txmode.offloads;
                ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
                                rte_eth_dev_socket_id(portid),
-                               NULL);
+                               &txq_conf);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup:err=%d, port=%u\n",
                                ret, portid);
@@ -680,6 +713,11 @@ main(int argc, char **argv)
                        "Cannot set error callback for tx buffer on port %u\n",
                                 portid);
 
+               ret = rte_eth_dev_set_ptypes(portid, RTE_PTYPE_UNKNOWN, NULL,
+                                            0);
+               if (ret < 0)
+                       printf("Port %u, Failed to disable Ptype parsing\n",
+                                       portid);
                /* Start device */
                ret = rte_eth_dev_start(portid);
                if (ret < 0)
@@ -688,7 +726,11 @@ main(int argc, char **argv)
 
                printf("done: \n");
 
-               rte_eth_promiscuous_enable(portid);
+               ret = rte_eth_promiscuous_enable(portid);
+               if (ret != 0)
+                       rte_exit(EXIT_FAILURE,
+                                "rte_eth_promiscuous_enable:err=%s, port=%u\n",
+                                rte_strerror(-ret), portid);
 
                printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
                                portid,
@@ -708,7 +750,7 @@ main(int argc, char **argv)
                        "All available ports are disabled. Please set portmask.\n");
        }
 
-       check_all_ports_link_status(nb_ports, l2fwd_enabled_port_mask);
+       check_all_ports_link_status(l2fwd_enabled_port_mask);
 
        ret = 0;
        /* launch per-lcore init on every lcore */
@@ -720,7 +762,7 @@ main(int argc, char **argv)
                }
        }
 
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
                        continue;
                printf("Closing port %d...", portid);