examples: remove extra new line after link duplex
[dpdk.git] / examples / l2fwd / main.c
index e4a4a7c..f8d14b8 100644 (file)
@@ -59,7 +59,7 @@ static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
 
 /* ethernet addresses of ports */
-static struct ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
 
 /* mask of enabled ports */
 static uint32_t l2fwd_enabled_port_mask = 0;
@@ -82,8 +82,6 @@ static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
 static struct rte_eth_conf port_conf = {
        .rxmode = {
                .split_hdr_size = 0,
-               .ignore_offload_bitfield = 1,
-               .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
        },
        .txmode = {
                .mq_mode = ETH_MQ_TX_NONE,
@@ -153,17 +151,17 @@ print_stats(void)
 static void
 l2fwd_mac_updating(struct rte_mbuf *m, unsigned dest_portid)
 {
-       struct ether_hdr *eth;
+       struct rte_ether_hdr *eth;
        void *tmp;
 
-       eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+       eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
 
        /* 02:00:00:00:00:xx */
        tmp = &eth->d_addr.addr_bytes[0];
        *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dest_portid << 40);
 
        /* src addr */
-       ether_addr_copy(&l2fwd_ports_eth_addr[dest_portid], &eth->s_addr);
+       rte_ether_addr_copy(&l2fwd_ports_eth_addr[dest_portid], &eth->s_addr);
 }
 
 static void
@@ -283,7 +281,7 @@ l2fwd_main_loop(void)
 }
 
 static int
-l2fwd_launch_one_lcore(__attribute__((unused)) void *dummy)
+l2fwd_launch_one_lcore(__rte_unused void *dummy)
 {
        l2fwd_main_loop();
        return 0;
@@ -444,13 +442,14 @@ l2fwd_parse_args(int argc, char **argv)
 
 /* Check the link status of all ports in up to 9s, and print them finally */
 static void
-check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
 {
 #define CHECK_INTERVAL 100 /* 100ms */
 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
        uint16_t portid;
        uint8_t count, all_ports_up, print_flag = 0;
        struct rte_eth_link link;
+       int ret;
 
        printf("\nChecking link status");
        fflush(stdout);
@@ -458,13 +457,20 @@ check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
                if (force_quit)
                        return;
                all_ports_up = 1;
-               for (portid = 0; portid < port_num; portid++) {
+               RTE_ETH_FOREACH_DEV(portid) {
                        if (force_quit)
                                return;
                        if ((port_mask & (1 << portid)) == 0)
                                continue;
                        memset(&link, 0, sizeof(link));
-                       rte_eth_link_get_nowait(portid, &link);
+                       ret = rte_eth_link_get_nowait(portid, &link);
+                       if (ret < 0) {
+                               all_ports_up = 0;
+                               if (print_flag == 1)
+                                       printf("Port %u link get failed: %s\n",
+                                               portid, rte_strerror(-ret));
+                               continue;
+                       }
                        /* print link status if flag set */
                        if (print_flag == 1) {
                                if (link.link_status)
@@ -472,7 +478,7 @@ check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
                                        "Port%d Link Up. Speed %u Mbps - %s\n",
                                                portid, link.link_speed,
                                (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
-                                       ("full-duplex") : ("half-duplex\n"));
+                                       ("full-duplex") : ("half-duplex"));
                                else
                                        printf("Port %d Link Down\n", portid);
                                continue;
@@ -517,7 +523,7 @@ main(int argc, char **argv)
        struct lcore_queue_conf *qconf;
        int ret;
        uint16_t nb_ports;
-       uint16_t nb_ports_available;
+       uint16_t nb_ports_available = 0;
        uint16_t portid, last_port;
        unsigned lcore_id, rx_lcore_id;
        unsigned nb_ports_in_mask = 0;
@@ -545,7 +551,7 @@ main(int argc, char **argv)
        /* convert to number of cycles */
        timer_period *= rte_get_timer_hz();
 
-       nb_ports = rte_eth_dev_count();
+       nb_ports = rte_eth_dev_count_avail();
        if (nb_ports == 0)
                rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
 
@@ -562,7 +568,7 @@ main(int argc, char **argv)
        /*
         * Each logical core is assigned a dedicated TX queue on each port.
         */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                /* skip ports that are not enabled */
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
                        continue;
@@ -585,7 +591,7 @@ main(int argc, char **argv)
        qconf = NULL;
 
        /* Initialize the port/queue configuration of each logical core */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                /* skip ports that are not enabled */
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
                        continue;
@@ -610,8 +616,6 @@ main(int argc, char **argv)
                printf("Lcore %u: RX port %u\n", rx_lcore_id, portid);
        }
 
-       nb_ports_available = nb_ports;
-
        nb_mbufs = RTE_MAX(nb_ports * (nb_rxd + nb_txd + MAX_PKT_BURST +
                nb_lcores * MEMPOOL_CACHE_SIZE), 8192U);
 
@@ -623,7 +627,7 @@ main(int argc, char **argv)
                rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
 
        /* Initialise each port */
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                struct rte_eth_rxconf rxq_conf;
                struct rte_eth_txconf txq_conf;
                struct rte_eth_conf local_port_conf = port_conf;
@@ -632,13 +636,20 @@ main(int argc, char **argv)
                /* skip ports that are not enabled */
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0) {
                        printf("Skipping disabled port %u\n", portid);
-                       nb_ports_available--;
                        continue;
                }
+               nb_ports_available++;
+
                /* init port */
                printf("Initializing port %u... ", portid);
                fflush(stdout);
-               rte_eth_dev_info_get(portid, &dev_info);
+
+               ret = rte_eth_dev_info_get(portid, &dev_info);
+               if (ret != 0)
+                       rte_exit(EXIT_FAILURE,
+                               "Error during getting device (port %u) info: %s\n",
+                               portid, strerror(-ret));
+
                if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
                        local_port_conf.txmode.offloads |=
                                DEV_TX_OFFLOAD_MBUF_FAST_FREE;
@@ -654,7 +665,12 @@ main(int argc, char **argv)
                                 "Cannot adjust number of descriptors: err=%d, port=%u\n",
                                 ret, portid);
 
-               rte_eth_macaddr_get(portid,&l2fwd_ports_eth_addr[portid]);
+               ret = rte_eth_macaddr_get(portid,
+                                         &l2fwd_ports_eth_addr[portid]);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE,
+                                "Cannot get MAC address: err=%d, port=%u\n",
+                                ret, portid);
 
                /* init one RX queue */
                fflush(stdout);
@@ -671,7 +687,6 @@ main(int argc, char **argv)
                /* init one TX queue on each port */
                fflush(stdout);
                txq_conf = dev_info.default_txconf;
-               txq_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
                txq_conf.offloads = local_port_conf.txmode.offloads;
                ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
                                rte_eth_dev_socket_id(portid),
@@ -698,6 +713,11 @@ main(int argc, char **argv)
                        "Cannot set error callback for tx buffer on port %u\n",
                                 portid);
 
+               ret = rte_eth_dev_set_ptypes(portid, RTE_PTYPE_UNKNOWN, NULL,
+                                            0);
+               if (ret < 0)
+                       printf("Port %u, Failed to disable Ptype parsing\n",
+                                       portid);
                /* Start device */
                ret = rte_eth_dev_start(portid);
                if (ret < 0)
@@ -706,7 +726,11 @@ main(int argc, char **argv)
 
                printf("done: \n");
 
-               rte_eth_promiscuous_enable(portid);
+               ret = rte_eth_promiscuous_enable(portid);
+               if (ret != 0)
+                       rte_exit(EXIT_FAILURE,
+                                "rte_eth_promiscuous_enable:err=%s, port=%u\n",
+                                rte_strerror(-ret), portid);
 
                printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
                                portid,
@@ -726,7 +750,7 @@ main(int argc, char **argv)
                        "All available ports are disabled. Please set portmask.\n");
        }
 
-       check_all_ports_link_status(nb_ports, l2fwd_enabled_port_mask);
+       check_all_ports_link_status(l2fwd_enabled_port_mask);
 
        ret = 0;
        /* launch per-lcore init on every lcore */
@@ -738,7 +762,7 @@ main(int argc, char **argv)
                }
        }
 
-       for (portid = 0; portid < nb_ports; portid++) {
+       RTE_ETH_FOREACH_DEV(portid) {
                if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
                        continue;
                printf("Closing port %d...", portid);