#include <rte_memcpy.h>
#include <rte_eal.h>
#include <rte_launch.h>
-#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_prefetch.h>
#include <rte_lcore.h>
#include <rte_power_empty_poll.h>
#include <rte_metrics.h>
#include <rte_telemetry.h>
+#include <rte_power_pmd_mgmt.h>
#include "perf_core.h"
#include "main.h"
APP_MODE_DEFAULT = 0,
APP_MODE_LEGACY,
APP_MODE_EMPTY_POLL,
- APP_MODE_TELEMETRY
+ APP_MODE_TELEMETRY,
+ APP_MODE_INTERRUPT,
+ APP_MODE_PMD_MGMT
};
enum appmode app_mode;
+static enum rte_power_pmd_mgmt_type pmgmt_type;
+bool baseline_enabled;
+
enum freq_scale_hint_t
{
FREQ_LOWER = -1,
static struct rte_eth_conf port_conf = {
.rxmode = {
- .mq_mode = ETH_MQ_RX_RSS,
- .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
+ .mq_mode = RTE_ETH_MQ_RX_RSS,
.split_hdr_size = 0,
- .offloads = DEV_RX_OFFLOAD_CHECKSUM,
+ .offloads = RTE_ETH_RX_OFFLOAD_CHECKSUM,
},
.rx_adv_conf = {
.rss_conf = {
.rss_key = NULL,
- .rss_hf = ETH_RSS_UDP,
+ .rss_hf = RTE_ETH_RSS_UDP,
},
},
.txmode = {
- .mq_mode = ETH_MQ_TX_NONE,
+ .mq_mode = RTE_ETH_MQ_TX_NONE,
}
};
+static uint32_t max_pkt_len;
+
static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
dst_port = portid;
/* 02:00:00:00:00:xx */
- d_addr_bytes = ð_hdr->d_addr.addr_bytes[0];
+ d_addr_bytes = ð_hdr->dst_addr.addr_bytes[0];
*((uint64_t *)d_addr_bytes) =
0x000000000002 + ((uint64_t)dst_port << 40);
/* src addr */
rte_ether_addr_copy(&ports_eth_addr[dst_port],
- ð_hdr->s_addr);
+ ð_hdr->src_addr);
send_single_packet(m, dst_port);
} else if (RTE_ETH_IS_IPV6_HDR(m->packet_type)) {
dst_port = portid;
/* 02:00:00:00:00:xx */
- d_addr_bytes = ð_hdr->d_addr.addr_bytes[0];
+ d_addr_bytes = ð_hdr->dst_addr.addr_bytes[0];
*((uint64_t *)d_addr_bytes) =
0x000000000002 + ((uint64_t)dst_port << 40);
/* src addr */
rte_ether_addr_copy(&ports_eth_addr[dst_port],
- ð_hdr->s_addr);
+ ð_hdr->src_addr);
send_single_packet(m, dst_port);
#else
* 0 on success
*/
static int
-sleep_until_rx_interrupt(int num)
+sleep_until_rx_interrupt(int num, int lcore)
{
/*
* we want to track when we are woken up by traffic so that we can go
- * back to sleep again without log spamming.
+ * back to sleep again without log spamming. Avoid cache line sharing
+ * to prevent threads stepping on each others' toes.
*/
- static bool timeout;
+ static struct {
+ bool wakeup;
+ } __rte_cache_aligned status[RTE_MAX_LCORE];
struct rte_epoll_event event[num];
int n, i;
uint16_t port_id;
uint8_t queue_id;
void *data;
- if (!timeout) {
+ if (status[lcore].wakeup) {
RTE_LOG(INFO, L3FWD_POWER,
"lcore %u sleeps until interrupt triggers\n",
rte_lcore_id());
" port %d queue %d\n",
rte_lcore_id(), port_id, queue_id);
}
- timeout = n == 0;
+ status[lcore].wakeup = n != 0;
return 0;
}
return 0;
}
+
+/* Main processing loop. 8< */
+static int main_intr_loop(__rte_unused void *dummy)
+{
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ unsigned int lcore_id;
+ uint64_t prev_tsc, diff_tsc, cur_tsc;
+ int i, j, nb_rx;
+ uint8_t queueid;
+ uint16_t portid;
+ struct lcore_conf *qconf;
+ struct lcore_rx_queue *rx_queue;
+ uint32_t lcore_rx_idle_count = 0;
+ uint32_t lcore_idle_hint = 0;
+ int intr_en = 0;
+
+ const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
+ US_PER_S * BURST_TX_DRAIN_US;
+
+ prev_tsc = 0;
+
+ lcore_id = rte_lcore_id();
+ qconf = &lcore_conf[lcore_id];
+
+ if (qconf->n_rx_queue == 0) {
+ RTE_LOG(INFO, L3FWD_POWER, "lcore %u has nothing to do\n",
+ lcore_id);
+ return 0;
+ }
+
+ RTE_LOG(INFO, L3FWD_POWER, "entering main interrupt loop on lcore %u\n",
+ lcore_id);
+
+ for (i = 0; i < qconf->n_rx_queue; i++) {
+ portid = qconf->rx_queue_list[i].port_id;
+ queueid = qconf->rx_queue_list[i].queue_id;
+ RTE_LOG(INFO, L3FWD_POWER,
+ " -- lcoreid=%u portid=%u rxqueueid=%hhu\n",
+ lcore_id, portid, queueid);
+ }
+
+ /* add into event wait list */
+ if (event_register(qconf) == 0)
+ intr_en = 1;
+ else
+ RTE_LOG(INFO, L3FWD_POWER, "RX interrupt won't enable.\n");
+
+ while (!is_done()) {
+ stats[lcore_id].nb_iteration_looped++;
+
+ cur_tsc = rte_rdtsc();
+
+ /*
+ * TX burst queue drain
+ */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+ for (i = 0; i < qconf->n_tx_port; ++i) {
+ portid = qconf->tx_port_id[i];
+ rte_eth_tx_buffer_flush(portid,
+ qconf->tx_queue_id[portid],
+ qconf->tx_buffer[portid]);
+ }
+ prev_tsc = cur_tsc;
+ }
+
+start_rx:
+ /*
+ * Read packet from RX queues
+ */
+ lcore_rx_idle_count = 0;
+ for (i = 0; i < qconf->n_rx_queue; ++i) {
+ rx_queue = &(qconf->rx_queue_list[i]);
+ rx_queue->idle_hint = 0;
+ portid = rx_queue->port_id;
+ queueid = rx_queue->queue_id;
+
+ nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
+ MAX_PKT_BURST);
+
+ stats[lcore_id].nb_rx_processed += nb_rx;
+ if (unlikely(nb_rx == 0)) {
+ /**
+ * no packet received from rx queue, try to
+ * sleep for a while forcing CPU enter deeper
+ * C states.
+ */
+ rx_queue->zero_rx_packet_count++;
+
+ if (rx_queue->zero_rx_packet_count <=
+ MIN_ZERO_POLL_COUNT)
+ continue;
+
+ rx_queue->idle_hint = power_idle_heuristic(
+ rx_queue->zero_rx_packet_count);
+ lcore_rx_idle_count++;
+ } else {
+ rx_queue->zero_rx_packet_count = 0;
+ }
+
+ /* Prefetch first packets */
+ for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
+ rte_prefetch0(rte_pktmbuf_mtod(
+ pkts_burst[j], void *));
+ }
+
+ /* Prefetch and forward already prefetched packets */
+ for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
+ rte_prefetch0(rte_pktmbuf_mtod(
+ pkts_burst[j + PREFETCH_OFFSET],
+ void *));
+ l3fwd_simple_forward(
+ pkts_burst[j], portid, qconf);
+ }
+
+ /* Forward remaining prefetched packets */
+ for (; j < nb_rx; j++) {
+ l3fwd_simple_forward(
+ pkts_burst[j], portid, qconf);
+ }
+ }
+
+ if (unlikely(lcore_rx_idle_count == qconf->n_rx_queue)) {
+ /**
+ * All Rx queues empty in recent consecutive polls,
+ * sleep in a conservative manner, meaning sleep as
+ * less as possible.
+ */
+ for (i = 1,
+ lcore_idle_hint = qconf->rx_queue_list[0].idle_hint;
+ i < qconf->n_rx_queue; ++i) {
+ rx_queue = &(qconf->rx_queue_list[i]);
+ if (rx_queue->idle_hint < lcore_idle_hint)
+ lcore_idle_hint = rx_queue->idle_hint;
+ }
+
+ if (lcore_idle_hint < SUSPEND_THRESHOLD)
+ /**
+ * execute "pause" instruction to avoid context
+ * switch which generally take hundred of
+ * microseconds for short sleep.
+ */
+ rte_delay_us(lcore_idle_hint);
+ else {
+ /* suspend until rx interrupt triggers */
+ if (intr_en) {
+ turn_on_off_intr(qconf, 1);
+ sleep_until_rx_interrupt(
+ qconf->n_rx_queue,
+ lcore_id);
+ turn_on_off_intr(qconf, 0);
+ /**
+ * start receiving packets immediately
+ */
+ if (likely(!is_done()))
+ goto start_rx;
+ }
+ }
+ stats[lcore_id].sleep_time += lcore_idle_hint;
+ }
+ }
+
+ return 0;
+}
+/* >8 End of main processing loop. */
+
/* main processing loop */
static int
main_telemetry_loop(__rte_unused void *dummy)
if (intr_en) {
turn_on_off_intr(qconf, 1);
sleep_until_rx_interrupt(
- qconf->n_rx_queue);
+ qconf->n_rx_queue,
+ lcore_id);
turn_on_off_intr(qconf, 0);
/**
* start receiving packets immediately
"off\n", lcore, socketid);
}
if (app_mode == APP_MODE_TELEMETRY && lcore == rte_lcore_id()) {
- printf("cannot enable master core %d in config for telemetry mode\n",
+ printf("cannot enable main core %d in config for telemetry mode\n",
rte_lcore_id());
return -1;
}
" [--config (port,queue,lcore)[,(port,queue,lcore]]"
" [--high-perf-cores CORELIST"
" [--perf-config (port,queue,hi_perf,lcore_index)[,(port,queue,hi_perf,lcore_index]]"
- " [--enable-jumbo [--max-pkt-len PKTLEN]]\n"
+ " [--max-pkt-len PKTLEN]\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " -P : enable promiscuous mode\n"
+ " -P: enable promiscuous mode\n"
" --config (port,queue,lcore): rx queues configuration\n"
" --high-perf-cores CORELIST: list of high performance cores\n"
" --perf-config: similar as config, cores specified as indices"
" for bins containing high or regular performance cores\n"
" --no-numa: optional, disable numa awareness\n"
- " --enable-jumbo: enable jumbo frame"
- " which max packet len is PKTLEN in decimal (64-9600)\n"
+ " --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
" --parse-ptype: parse packet type by software\n"
" --legacy: use legacy interrupt-based scaling\n"
" --empty-poll: enable empty poll detection"
" follow (training_flag, high_threshold, med_threshold)\n"
" --telemetry: enable telemetry mode, to update"
- " empty polls, full polls, and core busyness to telemetry\n",
+ " empty polls, full polls, and core busyness to telemetry\n"
+ " --interrupt-only: enable interrupt-only mode\n"
+ " --pmd-mgmt MODE: enable PMD power management mode. "
+ "Currently supported modes: baseline, monitor, pause, scale\n",
prgname);
}
/* parse hexadecimal string */
pm = strtoul(portmask, &end, 16);
if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
- return -1;
-
- if (pm == 0)
- return -1;
+ return 0;
return pm;
}
return 0;
}
+
+static int
+parse_pmd_mgmt_config(const char *name)
+{
+#define PMD_MGMT_MONITOR "monitor"
+#define PMD_MGMT_PAUSE "pause"
+#define PMD_MGMT_SCALE "scale"
+#define PMD_MGMT_BASELINE "baseline"
+
+ if (strncmp(PMD_MGMT_MONITOR, name, sizeof(PMD_MGMT_MONITOR)) == 0) {
+ pmgmt_type = RTE_POWER_MGMT_TYPE_MONITOR;
+ return 0;
+ }
+
+ if (strncmp(PMD_MGMT_PAUSE, name, sizeof(PMD_MGMT_PAUSE)) == 0) {
+ pmgmt_type = RTE_POWER_MGMT_TYPE_PAUSE;
+ return 0;
+ }
+
+ if (strncmp(PMD_MGMT_SCALE, name, sizeof(PMD_MGMT_SCALE)) == 0) {
+ pmgmt_type = RTE_POWER_MGMT_TYPE_SCALE;
+ return 0;
+ }
+ if (strncmp(PMD_MGMT_BASELINE, name, sizeof(PMD_MGMT_BASELINE)) == 0) {
+ baseline_enabled = true;
+ return 0;
+ }
+ /* unknown PMD power management mode */
+ return -1;
+}
+
static int
parse_ep_config(const char *q_arg)
{
int hgh_edpi;
ep_med_edpi = EMPTY_POLL_MED_THRESHOLD;
- ep_hgh_edpi = EMPTY_POLL_MED_THRESHOLD;
+ ep_hgh_edpi = EMPTY_POLL_HGH_THRESHOLD;
strlcpy(s, p, sizeof(s));
if (med_edpi > 0)
ep_med_edpi = med_edpi;
- if (med_edpi > 0)
+ if (hgh_edpi > 0)
ep_hgh_edpi = hgh_edpi;
} else {
#define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
#define CMD_LINE_OPT_LEGACY "legacy"
#define CMD_LINE_OPT_EMPTY_POLL "empty-poll"
+#define CMD_LINE_OPT_INTERRUPT_ONLY "interrupt-only"
#define CMD_LINE_OPT_TELEMETRY "telemetry"
+#define CMD_LINE_OPT_PMD_MGMT "pmd-mgmt"
+#define CMD_LINE_OPT_MAX_PKT_LEN "max-pkt-len"
/* Parse the argument given in the command line of the application */
static int
{"perf-config", 1, 0, 0},
{"high-perf-cores", 1, 0, 0},
{"no-numa", 0, 0, 0},
- {"enable-jumbo", 0, 0, 0},
+ {CMD_LINE_OPT_MAX_PKT_LEN, 1, 0, 0},
{CMD_LINE_OPT_EMPTY_POLL, 1, 0, 0},
{CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0},
{CMD_LINE_OPT_LEGACY, 0, 0, 0},
{CMD_LINE_OPT_TELEMETRY, 0, 0, 0},
+ {CMD_LINE_OPT_INTERRUPT_ONLY, 0, 0, 0},
+ {CMD_LINE_OPT_PMD_MGMT, 1, 0, 0},
{NULL, 0, 0, 0}
};
}
if (!strncmp(lgopts[option_index].name,
- "enable-jumbo", 12)) {
- struct option lenopts =
- {"max-pkt-len", required_argument, \
- 0, 0};
-
- printf("jumbo frame is enabled \n");
- port_conf.rxmode.offloads |=
- DEV_RX_OFFLOAD_JUMBO_FRAME;
- port_conf.txmode.offloads |=
- DEV_TX_OFFLOAD_MULTI_SEGS;
-
- /**
- * if no max-pkt-len set, use the default value
- * RTE_ETHER_MAX_LEN
- */
- if (0 == getopt_long(argc, argvopt, "",
- &lenopts, &option_index)) {
- ret = parse_max_pkt_len(optarg);
- if ((ret < 64) ||
- (ret > MAX_JUMBO_PKT_LEN)){
- printf("invalid packet "
- "length\n");
- print_usage(prgname);
- return -1;
- }
- port_conf.rxmode.max_rx_pkt_len = ret;
+ CMD_LINE_OPT_PMD_MGMT,
+ sizeof(CMD_LINE_OPT_PMD_MGMT))) {
+ if (app_mode != APP_MODE_DEFAULT) {
+ printf(" power mgmt mode is mutually exclusive with other modes\n");
+ return -1;
+ }
+ if (parse_pmd_mgmt_config(optarg) < 0) {
+ printf(" Invalid PMD power management mode: %s\n",
+ optarg);
+ return -1;
+ }
+ app_mode = APP_MODE_PMD_MGMT;
+ printf("PMD power mgmt mode is enabled\n");
+ }
+ if (!strncmp(lgopts[option_index].name,
+ CMD_LINE_OPT_INTERRUPT_ONLY,
+ sizeof(CMD_LINE_OPT_INTERRUPT_ONLY))) {
+ if (app_mode != APP_MODE_DEFAULT) {
+ printf(" interrupt-only mode is mutually exclusive with other modes\n");
+ return -1;
}
- printf("set jumbo frame "
- "max packet length to %u\n",
- (unsigned int)port_conf.rxmode.max_rx_pkt_len);
+ app_mode = APP_MODE_INTERRUPT;
+ printf("interrupt-only mode is enabled\n");
+ }
+
+ if (!strncmp(lgopts[option_index].name,
+ CMD_LINE_OPT_MAX_PKT_LEN,
+ sizeof(CMD_LINE_OPT_MAX_PKT_LEN))) {
+ printf("Custom frame size is configured\n");
+ max_pkt_len = parse_max_pkt_len(optarg);
}
if (!strncmp(lgopts[option_index].name,
uint16_t portid;
struct rte_eth_link link;
int ret;
+ char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];
printf("\nChecking link status");
fflush(stdout);
}
/* print link status if flag set */
if (print_flag == 1) {
- if (link.link_status)
- printf("Port %d Link Up - speed %u "
- "Mbps - %s\n", (uint8_t)portid,
- (unsigned)link.link_speed,
- (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex"));
- else
- printf("Port %d Link Down\n",
- (uint8_t)portid);
+ rte_eth_link_to_str(link_status_text,
+ sizeof(link_status_text), &link);
+ printf("Port %d %s\n", portid,
+ link_status_text);
continue;
}
/* clear all_ports_up flag if any link down */
- if (link.link_status == ETH_LINK_DOWN) {
+ if (link.link_status == RTE_ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
uint64_t app_eps = 0, app_fps = 0, app_br = 0;
uint64_t count = 0;
- RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ RTE_LCORE_FOREACH_WORKER(lcore_id) {
qconf = &lcore_conf[lcore_id];
if (qconf->n_rx_queue == 0)
continue;
RTE_SET_USED(lcore_id);
- if (rte_get_master_lcore() != lcore_id) {
- rte_panic("timer on lcore:%d which is not master core:%d\n",
+ if (rte_get_main_lcore() != lcore_id) {
+ rte_panic("timer on lcore:%d which is not main core:%d\n",
lcore_id,
- rte_get_master_lcore());
+ rte_get_main_lcore());
}
RTE_LOG(INFO, POWER, "Bring up the Timer\n");
return 0;
}
+static int
+autodetect_mode(void)
+{
+ RTE_LOG(NOTICE, L3FWD_POWER, "Operating mode not specified, probing frequency scaling support...\n");
+
+ /*
+ * Empty poll and telemetry modes have to be specifically requested to
+ * be enabled, but we can auto-detect between interrupt mode with or
+ * without frequency scaling. Both ACPI and pstate can be used.
+ */
+ if (rte_power_check_env_supported(PM_ENV_ACPI_CPUFREQ))
+ return APP_MODE_LEGACY;
+ if (rte_power_check_env_supported(PM_ENV_PSTATE_CPUFREQ))
+ return APP_MODE_LEGACY;
+
+ RTE_LOG(NOTICE, L3FWD_POWER, "Frequency scaling not supported, selecting interrupt-only mode\n");
+
+ return APP_MODE_INTERRUPT;
+}
+
+static const char *
+mode_to_str(enum appmode mode)
+{
+ switch (mode) {
+ case APP_MODE_LEGACY:
+ return "legacy";
+ case APP_MODE_EMPTY_POLL:
+ return "empty poll";
+ case APP_MODE_TELEMETRY:
+ return "telemetry";
+ case APP_MODE_INTERRUPT:
+ return "interrupt-only";
+ case APP_MODE_PMD_MGMT:
+ return "pmd mgmt";
+ default:
+ return "invalid";
+ }
+}
+
+static uint32_t
+eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
+{
+ uint32_t overhead_len;
+
+ if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
+ overhead_len = max_rx_pktlen - max_mtu;
+ else
+ overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+ return overhead_len;
+}
+
+static int
+config_port_max_pkt_len(struct rte_eth_conf *conf,
+ struct rte_eth_dev_info *dev_info)
+{
+ uint32_t overhead_len;
+
+ if (max_pkt_len == 0)
+ return 0;
+
+ if (max_pkt_len < RTE_ETHER_MIN_LEN || max_pkt_len > MAX_JUMBO_PKT_LEN)
+ return -1;
+
+ overhead_len = eth_dev_get_overhead_len(dev_info->max_rx_pktlen,
+ dev_info->max_mtu);
+ conf->rxmode.mtu = max_pkt_len - overhead_len;
+
+ if (conf->rxmode.mtu > RTE_ETHER_MTU)
+ conf->txmode.offloads |= RTE_ETH_TX_OFFLOAD_MULTI_SEGS;
+
+ return 0;
+}
+/* Power library initialized in the main routine. 8< */
int
main(int argc, char **argv)
{
/* init RTE timer library to be used late */
rte_timer_subsystem_init();
+ /* if we're running pmd-mgmt mode, don't default to baseline mode */
+ baseline_enabled = false;
+
/* parse application arguments (after the EAL ones) */
ret = parse_args(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
if (app_mode == APP_MODE_DEFAULT)
- app_mode = APP_MODE_LEGACY;
+ app_mode = autodetect_mode();
+
+ RTE_LOG(INFO, L3FWD_POWER, "Selected operation mode: %s\n",
+ mode_to_str(app_mode));
/* only legacy and empty poll mode rely on power library */
if ((app_mode == APP_MODE_LEGACY || app_mode == APP_MODE_EMPTY_POLL) &&
RTE_ETH_FOREACH_DEV(portid) {
struct rte_eth_conf local_port_conf = port_conf;
/* not all app modes need interrupts */
- bool need_intr = app_mode == APP_MODE_LEGACY;
+ bool need_intr = app_mode == APP_MODE_LEGACY ||
+ app_mode == APP_MODE_INTERRUPT;
/* skip ports that are not enabled */
if ((enabled_port_mask & (1 << portid)) == 0) {
"Error during getting device (port %u) info: %s\n",
portid, strerror(-ret));
- if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ ret = config_port_max_pkt_len(&local_port_conf, &dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Invalid max packet length: %u (port %u)\n",
+ max_pkt_len, portid);
+
+ if (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE)
local_port_conf.txmode.offloads |=
- DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+ RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
dev_info.flow_type_rss_offloads;
qconf = &lcore_conf[lcore_id];
printf("\nInitializing rx queues on lcore %u ... ", lcore_id );
fflush(stdout);
+
/* init RX queues */
for(queue = 0; queue < qconf->n_rx_queue; ++queue) {
struct rte_eth_rxconf rxq_conf;
if (add_cb_parse_ptype(portid, queueid) < 0)
rte_exit(EXIT_FAILURE,
"Fail to add ptype cb\n");
- } else if (!check_ptype(portid))
- rte_exit(EXIT_FAILURE,
- "PMD can not provide needed ptypes\n");
+ }
+
+ if (app_mode == APP_MODE_PMD_MGMT && !baseline_enabled) {
+ ret = rte_power_ethdev_pmgmt_queue_enable(
+ lcore_id, portid, queueid,
+ pmgmt_type);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_power_ethdev_pmgmt_queue_enable: err=%d, port=%d\n",
+ ret, portid);
+ }
}
}
+ /* >8 End of power library initialization. */
printf("\n");
}
/* initialize spinlock for each port */
rte_spinlock_init(&(locks[portid]));
+
+ if (!parse_ptype)
+ if (!check_ptype(portid))
+ rte_exit(EXIT_FAILURE,
+ "PMD can not provide needed ptypes\n");
}
check_all_ports_link_status(enabled_port_mask);
/* launch per-lcore init on every lcore */
if (app_mode == APP_MODE_LEGACY) {
- rte_eal_mp_remote_launch(main_legacy_loop, NULL, CALL_MASTER);
+ rte_eal_mp_remote_launch(main_legacy_loop, NULL, CALL_MAIN);
} else if (app_mode == APP_MODE_EMPTY_POLL) {
empty_poll_stop = false;
rte_eal_mp_remote_launch(main_empty_poll_loop, NULL,
- SKIP_MASTER);
+ SKIP_MAIN);
} else if (app_mode == APP_MODE_TELEMETRY) {
unsigned int i;
else
rte_exit(EXIT_FAILURE, "failed to register metrics names");
- RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ RTE_LCORE_FOREACH_WORKER(lcore_id) {
rte_spinlock_init(&stats[lcore_id].telemetry_lock);
}
rte_timer_init(&telemetry_timer);
handle_app_stats,
"Returns global power stats. Parameters: None");
rte_eal_mp_remote_launch(main_telemetry_loop, NULL,
- SKIP_MASTER);
+ SKIP_MAIN);
+ } else if (app_mode == APP_MODE_INTERRUPT) {
+ rte_eal_mp_remote_launch(main_intr_loop, NULL, CALL_MAIN);
+ } else if (app_mode == APP_MODE_PMD_MGMT) {
+ /* reuse telemetry loop for PMD power management mode */
+ rte_eal_mp_remote_launch(main_telemetry_loop, NULL, CALL_MAIN);
}
if (app_mode == APP_MODE_EMPTY_POLL || app_mode == APP_MODE_TELEMETRY)
launch_timer(rte_lcore_id());
- RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ RTE_LCORE_FOREACH_WORKER(lcore_id) {
if (rte_eal_wait_lcore(lcore_id) < 0)
return -1;
}
+ if (app_mode == APP_MODE_PMD_MGMT) {
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+ qconf = &lcore_conf[lcore_id];
+ for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
+ portid = qconf->rx_queue_list[queue].port_id;
+ queueid = qconf->rx_queue_list[queue].queue_id;
+
+ rte_power_ethdev_pmgmt_queue_disable(lcore_id,
+ portid, queueid);
+ }
+ }
+ }
+
RTE_ETH_FOREACH_DEV(portid)
{
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
- rte_eth_dev_stop(portid);
+ ret = rte_eth_dev_stop(portid);
+ if (ret != 0)
+ RTE_LOG(ERR, L3FWD_POWER, "rte_eth_dev_stop: err=%d, port=%u\n",
+ ret, portid);
+
rte_eth_dev_close(portid);
}
git.droids-corp.org / dpdk.git / blobdiff