#include <rte_tcp.h>
#include <rte_pause.h>
+#include "ioat.h"
#include "main.h"
#ifndef MAX_QUEUES
static uint32_t enable_tso;
static int client_mode;
-static int dequeue_zero_copy;
static int builtin_net_driver;
+static int async_vhost_driver;
+
+static char dma_type[MAX_LONG_OPT_SZ];
+
/* Specify timeout (in useconds) between retries on RX. */
static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
/* Specify the number of retries on RX. */
/ US_PER_S * BURST_TX_DRAIN_US)
#define VLAN_HLEN 4
+static inline int
+open_dma(const char *value)
+{
+ if (strncmp(dma_type, "ioat", 4) == 0)
+ return open_ioat(value);
+
+ return -1;
+}
+
/*
* Builds up the correct configuration for VMDQ VLAN pool map
* according to the pool & queue limits.
uint16_t q;
/* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
- rte_eth_dev_info_get (port, &dev_info);
+ retval = rte_eth_dev_info_get(port, &dev_info);
+ if (retval != 0) {
+ RTE_LOG(ERR, VHOST_PORT,
+ "Error during getting device (port %u) info: %s\n",
+ port, strerror(-retval));
+
+ return retval;
+ }
rxconf = &dev_info.default_rxconf;
txconf = &dev_info.default_txconf;
rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
- /*
- * When dequeue zero copy is enabled, guest Tx used vring will be
- * updated only when corresponding mbuf is freed. Thus, the nb_tx_desc
- * (tx_ring_size here) must be small enough so that the driver will
- * hit the free threshold easily and free mbufs timely. Otherwise,
- * guest Tx vring would be starved.
- */
- if (dequeue_zero_copy)
- tx_ring_size = 64;
-
tx_rings = (uint16_t)rte_lcore_count();
/* Get port configuration. */
return retval;
}
- if (promiscuous)
- rte_eth_promiscuous_enable(port);
+ if (promiscuous) {
+ retval = rte_eth_promiscuous_enable(port);
+ if (retval != 0) {
+ RTE_LOG(ERR, VHOST_PORT,
+ "Failed to enable promiscuous mode on port %u: %s\n",
+ port, rte_strerror(-retval));
+ return retval;
+ }
+ }
+
+ retval = rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ if (retval < 0) {
+ RTE_LOG(ERR, VHOST_PORT,
+ "Failed to get MAC address on port %u: %s\n",
+ port, rte_strerror(-retval));
+ return retval;
+ }
- rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
RTE_LOG(INFO, VHOST_PORT, "Max virtio devices supported: %u\n", num_devices);
RTE_LOG(INFO, VHOST_PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
/* parse hexadecimal string */
pm = strtoul(portmask, &end, 16);
if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
- return -1;
-
- if (pm == 0)
- return -1;
+ return 0;
return pm;
" --tx-csum [0|1] disable/enable TX checksum offload.\n"
" --tso [0|1] disable/enable TCP segment offload.\n"
" --client register a vhost-user socket as client mode.\n"
- " --dequeue-zero-copy enables dequeue zero copy\n",
+ " --dma-type register dma type for your vhost async driver. For example \"ioat\" for now.\n"
+ " --dmas register dma channel for specific vhost device.\n",
prgname);
}
{"tx-csum", required_argument, NULL, 0},
{"tso", required_argument, NULL, 0},
{"client", no_argument, &client_mode, 1},
- {"dequeue-zero-copy", no_argument, &dequeue_zero_copy, 1},
{"builtin-net-driver", no_argument, &builtin_net_driver, 1},
+ {"dma-type", required_argument, NULL, 0},
+ {"dmas", required_argument, NULL, 0},
{NULL, 0, 0, 0},
};
}
}
+ if (!strncmp(long_option[option_index].name,
+ "dma-type", MAX_LONG_OPT_SZ)) {
+ if (strlen(optarg) >= MAX_LONG_OPT_SZ) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Wrong DMA type\n");
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ strcpy(dma_type, optarg);
+ }
+
+ if (!strncmp(long_option[option_index].name,
+ "dmas", MAX_LONG_OPT_SZ)) {
+ if (open_dma(optarg) == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Wrong DMA args\n");
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ async_vhost_driver = 1;
+ }
+
break;
/* Invalid option - print options. */
struct rte_mbuf *m)
{
uint16_t ret;
+ struct rte_mbuf *m_cpl[1];
if (builtin_net_driver) {
ret = vs_enqueue_pkts(dst_vdev, VIRTIO_RXQ, &m, 1);
+ } else if (async_vhost_driver) {
+ ret = rte_vhost_submit_enqueue_burst(dst_vdev->vid, VIRTIO_RXQ,
+ &m, 1);
+
+ if (likely(ret))
+ dst_vdev->nr_async_pkts++;
+
+ while (likely(dst_vdev->nr_async_pkts)) {
+ if (rte_vhost_poll_enqueue_completed(dst_vdev->vid,
+ VIRTIO_RXQ, m_cpl, 1))
+ dst_vdev->nr_async_pkts--;
+ }
} else {
ret = rte_vhost_enqueue_burst(dst_vdev->vid, VIRTIO_RXQ, &m, 1);
}
{
if (ol_flags & PKT_TX_IPV4)
return rte_ipv4_phdr_cksum(l3_hdr, ol_flags);
- else /* assume ethertype == RTE_ETHER_TYPE_IPv6 */
+ else /* assume ethertype == RTE_ETHER_TYPE_IPV6 */
return rte_ipv6_phdr_cksum(l3_hdr, ol_flags);
}
}
}
+static __rte_always_inline void
+complete_async_pkts(struct vhost_dev *vdev, uint16_t qid)
+{
+ struct rte_mbuf *p_cpl[MAX_PKT_BURST];
+ uint16_t complete_count;
+
+ complete_count = rte_vhost_poll_enqueue_completed(vdev->vid,
+ qid, p_cpl, MAX_PKT_BURST);
+ vdev->nr_async_pkts -= complete_count;
+ if (complete_count)
+ free_pkts(p_cpl, complete_count);
+}
+
static __rte_always_inline void
drain_eth_rx(struct vhost_dev *vdev)
{
rx_count = rte_eth_rx_burst(ports[0], vdev->vmdq_rx_q,
pkts, MAX_PKT_BURST);
+
+ while (likely(vdev->nr_async_pkts))
+ complete_async_pkts(vdev, VIRTIO_RXQ);
+
if (!rx_count)
return;
if (builtin_net_driver) {
enqueue_count = vs_enqueue_pkts(vdev, VIRTIO_RXQ,
pkts, rx_count);
+ } else if (async_vhost_driver) {
+ enqueue_count = rte_vhost_submit_enqueue_burst(vdev->vid,
+ VIRTIO_RXQ, pkts, rx_count);
+ vdev->nr_async_pkts += enqueue_count;
} else {
enqueue_count = rte_vhost_enqueue_burst(vdev->vid, VIRTIO_RXQ,
pkts, rx_count);
}
+
if (enable_stats) {
rte_atomic64_add(&vdev->stats.rx_total_atomic, rx_count);
rte_atomic64_add(&vdev->stats.rx_atomic, enqueue_count);
}
- free_pkts(pkts, rx_count);
+ if (!async_vhost_driver)
+ free_pkts(pkts, rx_count);
}
static __rte_always_inline void
/* Set the dev_removal_flag on each lcore. */
- RTE_LCORE_FOREACH_SLAVE(lcore)
+ RTE_LCORE_FOREACH_WORKER(lcore)
lcore_info[lcore].dev_removal_flag = REQUEST_DEV_REMOVAL;
/*
* we can be sure that they can no longer access the device removed
* from the linked lists and that the devices are no longer in use.
*/
- RTE_LCORE_FOREACH_SLAVE(lcore) {
+ RTE_LCORE_FOREACH_WORKER(lcore) {
while (lcore_info[lcore].dev_removal_flag != ACK_DEV_REMOVAL)
rte_pause();
}
"(%d) device has been removed from data core\n",
vdev->vid);
+ if (async_vhost_driver)
+ rte_vhost_async_channel_unregister(vid, VIRTIO_RXQ);
+
rte_free(vdev);
}
int lcore, core_add = 0;
uint32_t device_num_min = num_devices;
struct vhost_dev *vdev;
-
vdev = rte_zmalloc("vhost device", sizeof(*vdev), RTE_CACHE_LINE_SIZE);
if (vdev == NULL) {
RTE_LOG(INFO, VHOST_DATA,
vdev->remove = 0;
/* Find a suitable lcore to add the device. */
- RTE_LCORE_FOREACH_SLAVE(lcore) {
+ RTE_LCORE_FOREACH_WORKER(lcore) {
if (lcore_info[lcore].device_num < device_num_min) {
device_num_min = lcore_info[lcore].device_num;
core_add = lcore;
"(%d) device has been added to data core %d\n",
vid, vdev->coreid);
+ if (async_vhost_driver) {
+ struct rte_vhost_async_features f;
+ struct rte_vhost_async_channel_ops channel_ops;
+ if (strncmp(dma_type, "ioat", 4) == 0) {
+ channel_ops.transfer_data = ioat_transfer_data_cb;
+ channel_ops.check_completed_copies =
+ ioat_check_completed_copies_cb;
+ f.async_inorder = 1;
+ f.async_threshold = 256;
+ return rte_vhost_async_channel_register(vid, VIRTIO_RXQ,
+ f.intval, &channel_ops);
+ }
+ }
+
return 0;
}
}
printf("===================================================\n");
+
+ fflush(stdout);
}
return NULL;
}
/* Launch all data cores. */
- RTE_LCORE_FOREACH_SLAVE(lcore_id)
+ RTE_LCORE_FOREACH_WORKER(lcore_id)
rte_eal_remote_launch(switch_worker, NULL, lcore_id);
if (client_mode)
flags |= RTE_VHOST_USER_CLIENT;
- if (dequeue_zero_copy)
- flags |= RTE_VHOST_USER_DEQUEUE_ZERO_COPY;
-
/* Register vhost user driver to handle vhost messages. */
for (i = 0; i < nb_sockets; i++) {
char *file = socket_files + i * PATH_MAX;
+ if (async_vhost_driver)
+ flags = flags | RTE_VHOST_USER_ASYNC_COPY;
+
ret = rte_vhost_driver_register(file, flags);
if (ret != 0) {
unregister_drivers(i);
}
}
- RTE_LCORE_FOREACH_SLAVE(lcore_id)
+ RTE_LCORE_FOREACH_WORKER(lcore_id)
rte_eal_wait_lcore(lcore_id);
return 0;
git.droids-corp.org / dpdk.git / blobdiff