#include <stdint.h>
#include <stdio.h>
+#include <rte_dev.h>
+#include <rte_lcore.h>
+
+/**
+ * Structure storing internal configuration (per-lcore)
+ */
+struct lcore_config {
+ pthread_t thread_id; /**< pthread identifier */
+ int pipe_master2slave[2]; /**< communication pipe with master */
+ int pipe_slave2master[2]; /**< communication pipe with master */
+
+ lcore_function_t * volatile f; /**< function to call */
+ void * volatile arg; /**< argument of function */
+ volatile int ret; /**< return value of function */
+
+ volatile enum rte_lcore_state_t state; /**< lcore state */
+ unsigned int socket_id; /**< physical socket id for this lcore */
+ unsigned int core_id; /**< core number on socket for this lcore */
+ int core_index; /**< relative index, starting from 0 */
+ uint8_t core_role; /**< role of core eg: OFF, RTE, SERVICE */
+
+ rte_cpuset_t cpuset; /**< cpu set which the lcore affinity to */
+};
+
+extern struct lcore_config lcore_config[RTE_MAX_LCORE];
+
+/**
+ * The global RTE configuration structure.
+ */
+struct rte_config {
+ uint32_t master_lcore; /**< Id of the master lcore */
+ uint32_t lcore_count; /**< Number of available logical cores. */
+ uint32_t numa_node_count; /**< Number of detected NUMA nodes. */
+ uint32_t numa_nodes[RTE_MAX_NUMA_NODES]; /**< List of detected NUMA nodes. */
+ uint32_t service_lcore_count;/**< Number of available service cores. */
+ enum rte_lcore_role_t lcore_role[RTE_MAX_LCORE]; /**< State of cores. */
+
+ /** Primary or secondary configuration */
+ enum rte_proc_type_t process_type;
+
+ /** PA or VA mapping mode */
+ enum rte_iova_mode iova_mode;
+
+ /**
+ * Pointer to memory configuration, which may be shared across multiple
+ * DPDK instances
+ */
+ struct rte_mem_config *mem_config;
+} __rte_packed;
+
+/**
+ * Get the global configuration structure.
+ *
+ * @return
+ * A pointer to the global configuration structure.
+ */
+struct rte_config *rte_eal_get_configuration(void);
+
/**
* Initialize the memzone subsystem (private to eal).
*
*/
int rte_eal_cpu_init(void);
+/**
+ * Create memseg lists
+ *
+ * This function is private to EAL.
+ *
+ * Preallocate virtual memory.
+ *
+ * @return
+ * 0 on success, negative on error
+ */
+int rte_eal_memseg_init(void);
+
/**
* Map memory
*
*/
int rte_eal_log_init(const char *id, int facility);
+/**
+ * Save the log regexp for later
+ */
+int rte_log_save_regexp(const char *type, int priority);
+int rte_log_save_pattern(const char *pattern, int priority);
+
/**
* Init tail queues for non-EAL library structures. This is to allow
* the rings, mempools, etc. lists to be shared among multiple processes
*/
int rte_eal_check_module(const char *module_name);
+/**
+ * Get virtual area of specified size from the OS.
+ *
+ * This function is private to the EAL.
+ *
+ * @param requested_addr
+ * Address where to request address space.
+ * @param size
+ * Size of requested area.
+ * @param page_sz
+ * Page size on which to align requested virtual area.
+ * @param flags
+ * EAL_VIRTUAL_AREA_* flags.
+ * @param mmap_flags
+ * Extra flags passed directly to mmap().
+ *
+ * @return
+ * Virtual area address if successful.
+ * NULL if unsuccessful.
+ */
+
+#define EAL_VIRTUAL_AREA_ADDR_IS_HINT (1 << 0)
+/**< don't fail if cannot get exact requested address. */
+#define EAL_VIRTUAL_AREA_ALLOW_SHRINK (1 << 1)
+/**< try getting smaller sized (decrement by page size) virtual areas if cannot
+ * get area of requested size.
+ */
+#define EAL_VIRTUAL_AREA_UNMAP (1 << 2)
+/**< immediately unmap reserved virtual area. */
+void *
+eal_get_virtual_area(void *requested_addr, size_t *size,
+ size_t page_sz, int flags, int mmap_flags);
+
/**
* Get cpu core_id.
*
* 0 on success;
* (<0) on failure.
*/
-
int rte_mp_channel_init(void);
+/**
+ * Primary/secondary communication cleanup.
+ */
+void rte_mp_channel_cleanup(void);
+
+/**
+ * @internal
+ * Parse a device string and store its information in an
+ * rte_devargs structure.
+ *
+ * A device description is split by layers of abstraction of the device:
+ * bus, class and driver. Each layer will offer a set of properties that
+ * can be applied either to configure or recognize a device.
+ *
+ * This function will parse those properties and prepare the rte_devargs
+ * to be given to each layers for processing.
+ *
+ * Note: if the "data" field of the devargs points to devstr,
+ * then no dynamic allocation is performed and the rte_devargs
+ * can be safely discarded.
+ *
+ * Otherwise ``data`` will hold a workable copy of devstr, that will be
+ * used by layers descriptors within rte_devargs. In this case,
+ * any rte_devargs should be cleaned-up before being freed.
+ *
+ * @param da
+ * rte_devargs structure to fill.
+ *
+ * @param devstr
+ * Device string.
+ *
+ * @return
+ * 0 on success.
+ * Negative errno values on error (rte_errno is set).
+ */
+int
+rte_devargs_layers_parse(struct rte_devargs *devargs,
+ const char *devstr);
+
+/*
+ * probe a device at local process.
+ *
+ * @param devargs
+ * Device arguments including bus, class and driver properties.
+ * @param new_dev
+ * new device be probed as output.
+ * @return
+ * 0 on success, negative on error.
+ */
+int local_dev_probe(const char *devargs, struct rte_device **new_dev);
+
+/**
+ * Hotplug remove a given device from a specific bus at local process.
+ *
+ * @param dev
+ * Data structure of the device to remove.
+ * @return
+ * 0 on success, negative on error.
+ */
+int local_dev_remove(struct rte_device *dev);
+
+/**
+ * Iterate over all buses to find the corresponding bus to handle the sigbus
+ * error.
+ * @param failure_addr
+ * Pointer of the fault address of the sigbus error.
+ *
+ * @return
+ * 0 success to handle the sigbus.
+ * -1 failed to handle the sigbus
+ * 1 no bus can handler the sigbus
+ */
+int rte_bus_sigbus_handler(const void *failure_addr);
+
+/**
+ * @internal
+ * Register the sigbus handler.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int
+dev_sigbus_handler_register(void);
+
+/**
+ * @internal
+ * Unregister the sigbus handler.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int
+dev_sigbus_handler_unregister(void);
+
+/**
+ * Check if the option is registered.
+ *
+ * @param option
+ * The option to be parsed.
+ *
+ * @return
+ * 0 on success
+ * @return
+ * -1 on fail
+ */
+int
+rte_option_parse(const char *opt);
+
+/**
+ * Iterate through the registered options and execute the associated
+ * callback if enabled.
+ */
+void
+rte_option_init(void);
+
+/**
+ * Iterate through the registered options and show the associated
+ * usage string.
+ */
+void
+rte_option_usage(void);
+
+/**
+ * Get OS-specific EAL mapping base address.
+ */
+uint64_t
+eal_get_baseaddr(void);
+
+void *
+eal_malloc_no_trace(const char *type, size_t size, unsigned int align);
+
+void eal_free_no_trace(void *addr);
+
#endif /* _EAL_PRIVATE_H_ */
git.droids-corp.org / dpdk.git / blobdiff