#include <stdint.h>
#include <rte_common.h>
-#include "rte_ether.h"
+#include <rte_ether.h>
+#include "rte_flow.h"
+#include "rte_ethdev.h"
/**
+ * @deprecated Please use rte_flow API instead of this legacy one.
* @file
*
* Ethernet device features and related data structures used
* by control APIs should be defined in this file.
- *
*/
#ifdef __cplusplus
extern "C" {
#endif
-/*
- * A packet can be identified by hardware as different flow types. Different
- * NIC hardwares may support different flow types.
- * Basically, the NIC hardware identifies the flow type as deep protocol as
- * possible, and exclusively. For example, if a packet is identified as
- * 'RTE_ETH_FLOW_NONFRAG_IPV4_TCP', it will not be any of other flow types,
- * though it is an actual IPV4 packet.
- * Note that the flow types are used to define RSS offload types in
- * rte_ethdev.h.
- */
-#define RTE_ETH_FLOW_UNKNOWN 0
-#define RTE_ETH_FLOW_RAW 1
-#define RTE_ETH_FLOW_IPV4 2
-#define RTE_ETH_FLOW_FRAG_IPV4 3
-#define RTE_ETH_FLOW_NONFRAG_IPV4_TCP 4
-#define RTE_ETH_FLOW_NONFRAG_IPV4_UDP 5
-#define RTE_ETH_FLOW_NONFRAG_IPV4_SCTP 6
-#define RTE_ETH_FLOW_NONFRAG_IPV4_OTHER 7
-#define RTE_ETH_FLOW_IPV6 8
-#define RTE_ETH_FLOW_FRAG_IPV6 9
-#define RTE_ETH_FLOW_NONFRAG_IPV6_TCP 10
-#define RTE_ETH_FLOW_NONFRAG_IPV6_UDP 11
-#define RTE_ETH_FLOW_NONFRAG_IPV6_SCTP 12
-#define RTE_ETH_FLOW_NONFRAG_IPV6_OTHER 13
-#define RTE_ETH_FLOW_L2_PAYLOAD 14
-#define RTE_ETH_FLOW_IPV6_EX 15
-#define RTE_ETH_FLOW_IPV6_TCP_EX 16
-#define RTE_ETH_FLOW_IPV6_UDP_EX 17
-#define RTE_ETH_FLOW_PORT 18
- /**< Consider device port number as a flow differentiator */
-#define RTE_ETH_FLOW_VXLAN 19 /**< VXLAN protocol based flow */
-#define RTE_ETH_FLOW_GENEVE 20 /**< GENEVE protocol based flow */
-#define RTE_ETH_FLOW_NVGRE 21 /**< NVGRE protocol based flow */
-#define RTE_ETH_FLOW_VXLAN_GPE 22 /**< VXLAN-GPE protocol based flow */
-#define RTE_ETH_FLOW_MAX 23
-
-/**
- * Feature filter types
- */
-enum rte_filter_type {
- RTE_ETH_FILTER_NONE = 0,
- RTE_ETH_FILTER_MACVLAN,
- RTE_ETH_FILTER_ETHERTYPE,
- RTE_ETH_FILTER_FLEXIBLE,
- RTE_ETH_FILTER_SYN,
- RTE_ETH_FILTER_NTUPLE,
- RTE_ETH_FILTER_TUNNEL,
- RTE_ETH_FILTER_FDIR,
- RTE_ETH_FILTER_HASH,
- RTE_ETH_FILTER_L2_TUNNEL,
- RTE_ETH_FILTER_GENERIC,
- RTE_ETH_FILTER_MAX
-};
-
-/**
- * Generic operations on filters
- */
-enum rte_filter_op {
- /** used to check whether the type filter is supported */
- RTE_ETH_FILTER_NOP = 0,
- RTE_ETH_FILTER_ADD, /**< add filter entry */
- RTE_ETH_FILTER_UPDATE, /**< update filter entry */
- RTE_ETH_FILTER_DELETE, /**< delete filter entry */
- RTE_ETH_FILTER_FLUSH, /**< flush all entries */
- RTE_ETH_FILTER_GET, /**< get filter entry */
- RTE_ETH_FILTER_SET, /**< configurations */
- RTE_ETH_FILTER_INFO, /**< retrieve information */
- RTE_ETH_FILTER_STATS, /**< retrieve statistics */
- RTE_ETH_FILTER_OP_MAX
-};
-
-/**
- * MAC filter type
- */
-enum rte_mac_filter_type {
- RTE_MAC_PERFECT_MATCH = 1, /**< exact match of MAC addr. */
- RTE_MACVLAN_PERFECT_MATCH, /**< exact match of MAC addr and VLAN ID. */
- RTE_MAC_HASH_MATCH, /**< hash match of MAC addr. */
- /** hash match of MAC addr and exact match of VLAN ID. */
- RTE_MACVLAN_HASH_MATCH,
-};
-
-/**
- * MAC filter info
- */
-struct rte_eth_mac_filter {
- uint8_t is_vf; /**< 1 for VF, 0 for port dev */
- uint16_t dst_id; /**< VF ID, available when is_vf is 1*/
- enum rte_mac_filter_type filter_type; /**< MAC filter type */
- struct ether_addr mac_addr;
-};
-
-/**
- * Define all structures for Ethertype Filter type.
- */
-
-#define RTE_ETHTYPE_FLAGS_MAC 0x0001 /**< If set, compare mac */
-#define RTE_ETHTYPE_FLAGS_DROP 0x0002 /**< If set, drop packet when match */
-
-/**
- * A structure used to define the ethertype filter entry
- * to support RTE_ETH_FILTER_ETHERTYPE with RTE_ETH_FILTER_ADD,
- * RTE_ETH_FILTER_DELETE and RTE_ETH_FILTER_GET operations.
- */
-struct rte_eth_ethertype_filter {
- struct ether_addr mac_addr; /**< Mac address to match. */
- uint16_t ether_type; /**< Ether type to match */
- uint16_t flags; /**< Flags from RTE_ETHTYPE_FLAGS_* */
- uint16_t queue; /**< Queue assigned to when match*/
-};
-
-#define RTE_FLEX_FILTER_MAXLEN 128 /**< bytes to use in flex filter. */
-#define RTE_FLEX_FILTER_MASK_SIZE \
- (RTE_ALIGN(RTE_FLEX_FILTER_MAXLEN, CHAR_BIT) / CHAR_BIT)
- /**< mask bytes in flex filter. */
-
-/**
- * A structure used to define the flex filter entry
- * to support RTE_ETH_FILTER_FLEXIBLE with RTE_ETH_FILTER_ADD,
- * RTE_ETH_FILTER_DELETE and RTE_ETH_FILTER_GET operations.
- */
-struct rte_eth_flex_filter {
- uint16_t len;
- uint8_t bytes[RTE_FLEX_FILTER_MAXLEN]; /**< flex bytes in big endian.*/
- uint8_t mask[RTE_FLEX_FILTER_MASK_SIZE]; /**< if mask bit is 1b, do
- not compare corresponding byte. */
- uint8_t priority;
- uint16_t queue; /**< Queue assigned to when match. */
-};
-
-/**
- * A structure used to define the TCP syn filter entry
- * to support RTE_ETH_FILTER_SYN with RTE_ETH_FILTER_ADD,
- * RTE_ETH_FILTER_DELETE and RTE_ETH_FILTER_GET operations.
- */
-struct rte_eth_syn_filter {
- uint8_t hig_pri; /**< 1 - higher priority than other filters,
- 0 - lower priority. */
- uint16_t queue; /**< Queue assigned to when match */
-};
-
/**
* Define all structures for ntuple Filter type.
*/
RTE_NTUPLE_FLAGS_DST_PORT | \
RTE_NTUPLE_FLAGS_PROTO)
-#define TCP_URG_FLAG 0x20
-#define TCP_ACK_FLAG 0x10
-#define TCP_PSH_FLAG 0x08
-#define TCP_RST_FLAG 0x04
-#define TCP_SYN_FLAG 0x02
-#define TCP_FIN_FLAG 0x01
-#define TCP_FLAG_ALL 0x3F
+#define RTE_NTUPLE_TCP_FLAGS_MASK 0x3F /**< TCP flags filter can match. */
/**
* A structure used to define the ntuple filter entry
- * to support RTE_ETH_FILTER_NTUPLE with RTE_ETH_FILTER_ADD,
- * RTE_ETH_FILTER_DELETE and RTE_ETH_FILTER_GET operations.
+ * to support RTE_ETH_FILTER_NTUPLE data representation.
*/
struct rte_eth_ntuple_filter {
uint16_t flags; /**< Flags from RTE_NTUPLE_FLAGS_* */
uint16_t queue; /**< Queue assigned to when match*/
};
-/**
- * Tunneled type.
- */
-enum rte_eth_tunnel_type {
- RTE_TUNNEL_TYPE_NONE = 0,
- RTE_TUNNEL_TYPE_VXLAN,
- RTE_TUNNEL_TYPE_GENEVE,
- RTE_TUNNEL_TYPE_TEREDO,
- RTE_TUNNEL_TYPE_NVGRE,
- RTE_TUNNEL_TYPE_IP_IN_GRE,
- RTE_L2_TUNNEL_TYPE_E_TAG,
- RTE_TUNNEL_TYPE_VXLAN_GPE,
- RTE_TUNNEL_TYPE_MAX,
-};
-
-/**
- * filter type of tunneling packet
- */
-#define ETH_TUNNEL_FILTER_OMAC 0x01 /**< filter by outer MAC addr */
-#define ETH_TUNNEL_FILTER_OIP 0x02 /**< filter by outer IP Addr */
-#define ETH_TUNNEL_FILTER_TENID 0x04 /**< filter by tenant ID */
-#define ETH_TUNNEL_FILTER_IMAC 0x08 /**< filter by inner MAC addr */
-#define ETH_TUNNEL_FILTER_IVLAN 0x10 /**< filter by inner VLAN ID */
-#define ETH_TUNNEL_FILTER_IIP 0x20 /**< filter by inner IP addr */
-
-#define RTE_TUNNEL_FILTER_IMAC_IVLAN (ETH_TUNNEL_FILTER_IMAC | \
- ETH_TUNNEL_FILTER_IVLAN)
-#define RTE_TUNNEL_FILTER_IMAC_IVLAN_TENID (ETH_TUNNEL_FILTER_IMAC | \
- ETH_TUNNEL_FILTER_IVLAN | \
- ETH_TUNNEL_FILTER_TENID)
-#define RTE_TUNNEL_FILTER_IMAC_TENID (ETH_TUNNEL_FILTER_IMAC | \
- ETH_TUNNEL_FILTER_TENID)
-#define RTE_TUNNEL_FILTER_OMAC_TENID_IMAC (ETH_TUNNEL_FILTER_OMAC | \
- ETH_TUNNEL_FILTER_TENID | \
- ETH_TUNNEL_FILTER_IMAC)
-
-/**
- * Select IPv4 or IPv6 for tunnel filters.
- */
-enum rte_tunnel_iptype {
- RTE_TUNNEL_IPTYPE_IPV4 = 0, /**< IPv4. */
- RTE_TUNNEL_IPTYPE_IPV6, /**< IPv6. */
-};
-
-/**
- * Tunneling Packet filter configuration.
- */
-struct rte_eth_tunnel_filter_conf {
- struct ether_addr outer_mac; /**< Outer MAC address to match. */
- struct ether_addr inner_mac; /**< Inner MAC address to match. */
- uint16_t inner_vlan; /**< Inner VLAN to match. */
- enum rte_tunnel_iptype ip_type; /**< IP address type. */
- /** Outer destination IP address to match if ETH_TUNNEL_FILTER_OIP
- is set in filter_type, or inner destination IP address to match
- if ETH_TUNNEL_FILTER_IIP is set in filter_type . */
- union {
- uint32_t ipv4_addr; /**< IPv4 address in big endian. */
- uint32_t ipv6_addr[4]; /**< IPv6 address in big endian. */
- } ip_addr;
- /** Flags from ETH_TUNNEL_FILTER_XX - see above. */
- uint16_t filter_type;
- enum rte_eth_tunnel_type tunnel_type; /**< Tunnel Type. */
- uint32_t tenant_id; /**< Tenant ID to match. VNI, GRE key... */
- uint16_t queue_id; /**< Queue assigned to if match. */
-};
-
-/**
- * Global eth device configuration type.
- */
-enum rte_eth_global_cfg_type {
- RTE_ETH_GLOBAL_CFG_TYPE_UNKNOWN = 0,
- RTE_ETH_GLOBAL_CFG_TYPE_GRE_KEY_LEN,
- RTE_ETH_GLOBAL_CFG_TYPE_MAX,
-};
-
-/**
- * Global eth device configuration.
- */
-struct rte_eth_global_cfg {
- enum rte_eth_global_cfg_type cfg_type; /**< Global config type. */
- union {
- uint8_t gre_key_len; /**< Valid GRE key length in byte. */
- uint64_t reserved; /**< Reserve space for future use. */
- } cfg;
-};
-
#define RTE_ETH_FDIR_MAX_FLEXLEN 16 /**< Max length of flexbytes. */
#define RTE_ETH_INSET_SIZE_MAX 128 /**< Max length of input set. */
* A structure used to define the input for MAC VLAN flow
*/
struct rte_eth_mac_vlan_flow {
- struct ether_addr mac_addr; /**< Mac address to match. */
+ struct rte_ether_addr mac_addr; /**< Mac address to match. */
};
/**
enum rte_eth_fdir_tunnel_type tunnel_type; /**< Tunnel type to match. */
/** Tunnel ID to match. TNI, VNI... in big endian. */
uint32_t tunnel_id;
- struct ether_addr mac_addr; /**< Mac address to match. */
+ struct rte_ether_addr mac_addr; /**< Mac address to match. */
};
/**
};
/**
- * A structure used to define the flow director filter entry by filter_ctrl API
- * It supports RTE_ETH_FILTER_FDIR with RTE_ETH_FILTER_ADD and
- * RTE_ETH_FILTER_DELETE operations.
+ * A structure used to define the flow director filter entry.
*/
struct rte_eth_fdir_filter {
uint32_t soft_id;
uint16_t vlan_tci_mask; /**< Bit mask for vlan_tci in big endian */
/** Bit mask for ipv4 flow in big endian. */
struct rte_eth_ipv4_flow ipv4_mask;
- /** Bit maks for ipv6 flow in big endian. */
+ /** Bit mask for ipv6 flow in big endian. */
struct rte_eth_ipv6_flow ipv6_mask;
/** Bit mask for L4 source port in big endian. */
uint16_t src_port_mask;
uint32_t best_cnt; /**< Number of filters in best effort spaces. */
};
-/**
- * Flow Director filter information types.
- */
-enum rte_eth_fdir_filter_info_type {
- RTE_ETH_FDIR_FILTER_INFO_TYPE_UNKNOWN = 0,
- /** Flow Director filter input set configuration */
- RTE_ETH_FDIR_FILTER_INPUT_SET_SELECT,
- RTE_ETH_FDIR_FILTER_INFO_TYPE_MAX,
-};
-
-/**
- * A structure used to set FDIR filter information, to support filter type
- * of 'RTE_ETH_FILTER_FDIR' RTE_ETH_FDIR_FILTER_INPUT_SET_SELECT operation.
- */
-struct rte_eth_fdir_filter_info {
- enum rte_eth_fdir_filter_info_type info_type; /**< Information type */
- /** Details of fdir filter information */
- union {
- /** Flow Director input set configuration per port */
- struct rte_eth_input_set_conf input_set_conf;
- } info;
-};
-
-/**
- * Hash filter information types.
- * - RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT is for getting/setting the
- * information/configuration of 'symmetric hash enable' per port.
- * - RTE_ETH_HASH_FILTER_GLOBAL_CONFIG is for getting/setting the global
- * configurations of hash filters. Those global configurations are valid
- * for all ports of the same NIC.
- * - RTE_ETH_HASH_FILTER_INPUT_SET_SELECT is for setting the global
- * hash input set fields
- */
-enum rte_eth_hash_filter_info_type {
- RTE_ETH_HASH_FILTER_INFO_TYPE_UNKNOWN = 0,
- /** Symmetric hash enable per port */
- RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT,
- /** Configure globally for hash filter */
- RTE_ETH_HASH_FILTER_GLOBAL_CONFIG,
- /** Global Hash filter input set configuration */
- RTE_ETH_HASH_FILTER_INPUT_SET_SELECT,
- RTE_ETH_HASH_FILTER_INFO_TYPE_MAX,
-};
-
-/**
- * Hash function types.
- */
-enum rte_eth_hash_function {
- RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
- RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
- RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
- RTE_ETH_HASH_FUNCTION_MAX,
-};
-
-#define RTE_SYM_HASH_MASK_ARRAY_SIZE \
- (RTE_ALIGN(RTE_ETH_FLOW_MAX, UINT64_BIT)/UINT64_BIT)
-/**
- * A structure used to set or get global hash function configurations which
- * include symmetric hash enable per flow type and hash function type.
- * Each bit in sym_hash_enable_mask[] indicates if the symmetric hash of the
- * corresponding flow type is enabled or not.
- * Each bit in valid_bit_mask[] indicates if the corresponding bit in
- * sym_hash_enable_mask[] is valid or not. For the configurations gotten, it
- * also means if the flow type is supported by hardware or not.
- */
-struct rte_eth_hash_global_conf {
- enum rte_eth_hash_function hash_func; /**< Hash function type */
- /** Bit mask for symmetric hash enable per flow type */
- uint64_t sym_hash_enable_mask[RTE_SYM_HASH_MASK_ARRAY_SIZE];
- /** Bit mask indicates if the corresponding bit is valid */
- uint64_t valid_bit_mask[RTE_SYM_HASH_MASK_ARRAY_SIZE];
-};
-
-/**
- * A structure used to set or get hash filter information, to support filter
- * type of 'RTE_ETH_FILTER_HASH' and its operations.
- */
-struct rte_eth_hash_filter_info {
- enum rte_eth_hash_filter_info_type info_type; /**< Information type */
- /** Details of hash filter information */
- union {
- /** For RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT */
- uint8_t enable;
- /** Global configurations of hash filter */
- struct rte_eth_hash_global_conf global_conf;
- /** Global configurations of hash filter input set */
- struct rte_eth_input_set_conf input_set_conf;
- } info;
-};
-
-/**
- * l2 tunnel configuration.
- */
-struct rte_eth_l2_tunnel_conf {
- enum rte_eth_tunnel_type l2_tunnel_type;
- uint16_t ether_type; /* ether type in l2 header */
- uint32_t tunnel_id; /* port tag id for e-tag */
- uint16_t vf_id; /* VF id for tag insertion */
- uint32_t pool; /* destination pool for tag based forwarding */
-};
-
#ifdef __cplusplus
}
#endif
git.droids-corp.org / dpdk.git / blobdiff