#include "rte_eth_ctrl.h"
#include "rte_dev_info.h"
+extern int rte_eth_dev_logtype;
+
+#define RTE_ETHDEV_LOG(level, ...) \
+ rte_log(RTE_LOG_ ## level, rte_eth_dev_logtype, "" __VA_ARGS__)
+
struct rte_mbuf;
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Initializes a device iterator.
+ *
+ * This iterator allows accessing a list of devices matching some devargs.
+ *
+ * @param iter
+ * Device iterator handle initialized by the function.
+ * The fields bus_str and cls_str might be dynamically allocated,
+ * and could be freed by calling rte_eth_iterator_cleanup().
+ *
+ * @param devargs
+ * Device description string.
+ *
+ * @return
+ * 0 on successful initialization, negative otherwise.
+ */
+__rte_experimental
+int rte_eth_iterator_init(struct rte_dev_iterator *iter, const char *devargs);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Iterates on devices with devargs filter.
+ * The ownership is not checked.
+ *
+ * The next port id is returned, and the iterator is updated.
+ *
+ * @param iter
+ * Device iterator handle initialized by rte_eth_iterator_init().
+ * Some fields bus_str and cls_str might be freed when no more port is found,
+ * by calling rte_eth_iterator_cleanup().
+ *
+ * @return
+ * A port id if found, RTE_MAX_ETHPORTS otherwise.
+ */
+__rte_experimental
+uint16_t rte_eth_iterator_next(struct rte_dev_iterator *iter);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Free some allocated fields of the iterator.
+ *
+ * This function is automatically called by rte_eth_iterator_next()
+ * on the last iteration (i.e. when no more matching port is found).
+ *
+ * It is safe to call this function twice; it will do nothing more.
+ *
+ * @param iter
+ * Device iterator handle initialized by rte_eth_iterator_init().
+ * The fields bus_str and cls_str are freed if needed.
+ */
+__rte_experimental
+void rte_eth_iterator_cleanup(struct rte_dev_iterator *iter);
+
+/**
+ * Macro to iterate over all ethdev ports matching some devargs.
+ *
+ * If a break is done before the end of the loop,
+ * the function rte_eth_iterator_cleanup() must be called.
+ *
+ * @param id
+ * Iterated port id of type uint16_t.
+ * @param devargs
+ * Device parameters input as string of type char*.
+ * @param iter
+ * Iterator handle of type struct rte_dev_iterator, used internally.
+ */
+#define RTE_ETH_FOREACH_MATCHING_DEV(id, devargs, iter) \
+ for (rte_eth_iterator_init(iter, devargs), \
+ id = rte_eth_iterator_next(iter); \
+ id != RTE_MAX_ETHPORTS; \
+ id = rte_eth_iterator_next(iter))
+
/**
* A structure used to retrieve statistics for an Ethernet port.
* Not all statistics fields in struct rte_eth_stats are supported
struct rte_eth_rxmode {
/** The multi-queue packet distribution mode to be used, e.g. RSS. */
enum rte_eth_rx_mq_mode mq_mode;
- uint32_t max_rx_pkt_len; /**< Only used if jumbo_frame enabled. */
+ uint32_t max_rx_pkt_len; /**< Only used if JUMBO_FRAME enabled. */
uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/
/**
* Per-port Rx offloads to be set using DEV_RX_OFFLOAD_* flags.
* structure are allowed to be set.
*/
uint64_t offloads;
- __extension__
- /**
- * Below bitfield API is obsolete. Application should
- * enable per-port offloads using the offload field
- * above.
- */
- uint16_t header_split : 1, /**< Header Split enable. */
- hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */
- hw_vlan_filter : 1, /**< VLAN filter enable. */
- hw_vlan_strip : 1, /**< VLAN strip enable. */
- hw_vlan_extend : 1, /**< Extended VLAN enable. */
- jumbo_frame : 1, /**< Jumbo Frame Receipt enable. */
- hw_strip_crc : 1, /**< Enable CRC stripping by hardware. */
- enable_scatter : 1, /**< Enable scatter packets rx handler */
- enable_lro : 1, /**< Enable LRO */
- hw_timestamp : 1, /**< Enable HW timestamp */
- security : 1, /**< Enable rte_security offloads */
- /**
- * When set the offload bitfield should be ignored.
- * Instead per-port Rx offloads should be set on offloads
- * field above.
- * Per-queue offloads shuold be set on rte_eth_rxq_conf
- * structure.
- * This bit is temporary till rxmode bitfield offloads API will
- * be deprecated.
- */
- ignore_offload_bitfield : 1;
};
/**
uint64_t offloads;
};
-#define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */
-#define ETH_TXQ_FLAGS_NOREFCOUNT 0x0002 /**< refcnt can be ignored */
-#define ETH_TXQ_FLAGS_NOMULTMEMP 0x0004 /**< all bufs come from same mempool */
-#define ETH_TXQ_FLAGS_NOVLANOFFL 0x0100 /**< disable VLAN offload */
-#define ETH_TXQ_FLAGS_NOXSUMSCTP 0x0200 /**< disable SCTP checksum offload */
-#define ETH_TXQ_FLAGS_NOXSUMUDP 0x0400 /**< disable UDP checksum offload */
-#define ETH_TXQ_FLAGS_NOXSUMTCP 0x0800 /**< disable TCP checksum offload */
-#define ETH_TXQ_FLAGS_NOOFFLOADS \
- (ETH_TXQ_FLAGS_NOVLANOFFL | ETH_TXQ_FLAGS_NOXSUMSCTP | \
- ETH_TXQ_FLAGS_NOXSUMUDP | ETH_TXQ_FLAGS_NOXSUMTCP)
-#define ETH_TXQ_FLAGS_NOXSUMS \
- (ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
- ETH_TXQ_FLAGS_NOXSUMTCP)
-/**
- * When set the txq_flags should be ignored,
- * instead per-queue Tx offloads will be set on offloads field
- * located on rte_eth_txq_conf struct.
- * This flag is temporary till the rte_eth_txq_conf.txq_flags
- * API will be deprecated.
- */
-#define ETH_TXQ_FLAGS_IGNORE 0x8000
-
/**
* A structure used to configure a TX ring of an Ethernet port.
*/
uint16_t tx_free_thresh; /**< Start freeing TX buffers if there are
less free descriptors than this value. */
- uint32_t txq_flags; /**< Set flags for the Tx queue */
uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
/**
* Per-queue Tx offloads to be set using DEV_TX_OFFLOAD_* flags.
struct rte_intr_conf intr_conf; /**< Interrupt mode configuration. */
};
-/**
- * A structure used to retrieve the contextual information of
- * an Ethernet device, such as the controlling driver of the device,
- * its PCI context, etc...
- */
-
/**
* RX offload capabilities of a device.
*/
#define DEV_RX_OFFLOAD_VLAN_FILTER 0x00000200
#define DEV_RX_OFFLOAD_VLAN_EXTEND 0x00000400
#define DEV_RX_OFFLOAD_JUMBO_FRAME 0x00000800
-#define DEV_RX_OFFLOAD_CRC_STRIP 0x00001000
#define DEV_RX_OFFLOAD_SCATTER 0x00002000
#define DEV_RX_OFFLOAD_TIMESTAMP 0x00004000
#define DEV_RX_OFFLOAD_SECURITY 0x00008000
+#define DEV_RX_OFFLOAD_KEEP_CRC 0x00010000
+#define DEV_RX_OFFLOAD_SCTP_CKSUM 0x00020000
+#define DEV_RX_OFFLOAD_OUTER_UDP_CKSUM 0x00040000
+
#define DEV_RX_OFFLOAD_CHECKSUM (DEV_RX_OFFLOAD_IPV4_CKSUM | \
DEV_RX_OFFLOAD_UDP_CKSUM | \
DEV_RX_OFFLOAD_TCP_CKSUM)
* for tunnel TSO.
*/
#define DEV_TX_OFFLOAD_IP_TNL_TSO 0x00080000
+/** Device supports outer UDP checksum */
+#define DEV_TX_OFFLOAD_OUTER_UDP_CKSUM 0x00100000
+/**
+ * Device supports match on metadata Tx offload..
+ * Application must set PKT_TX_METADATA and mbuf metadata field.
+ */
+#define DEV_TX_OFFLOAD_MATCH_METADATA 0x00200000
#define RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP 0x00000001
/**< Device supports Rx queue setup after device started*/
* mentioned in rte_tx_offload_names in rte_ethdev.c file.
*/
-struct rte_pci_device;
-
/*
* Fallback default preferred Rx/Tx port parameters.
* These are used if an application requests default parameters
/**
* Ethernet device information
*/
+
+/**
+ * A structure used to retrieve the contextual information of
+ * an Ethernet device, such as the controlling driver of the
+ * device, etc...
+ */
struct rte_eth_dev_info {
struct rte_device *device; /** Generic device information */
const char *driver_name; /**< Device Driver name. */
/* Macros to check for valid port */
#define RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, retval) do { \
if (!rte_eth_dev_is_valid_port(port_id)) { \
- RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \
+ RTE_ETHDEV_LOG(ERR, "Invalid port_id=%u\n", port_id); \
return retval; \
} \
} while (0)
#define RTE_ETH_VALID_PORTID_OR_RET(port_id) do { \
if (!rte_eth_dev_is_valid_port(port_id)) { \
- RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \
+ RTE_ETHDEV_LOG(ERR, "Invalid port_id=%u\n", port_id); \
return; \
} \
} while (0)
char name[RTE_ETH_MAX_OWNER_NAME_LEN]; /**< The owner name. */
};
+/**
+ * Port is released (i.e. totally freed and data erased) on close.
+ * Temporary flag for PMD migration to new rte_eth_dev_close() behaviour.
+ */
+#define RTE_ETH_DEV_CLOSE_REMOVE 0x0001
/** Device supports link state interrupt */
#define RTE_ETH_DEV_INTR_LSC 0x0002
/** Device is a bonded slave */
#define RTE_ETH_DEV_INTR_RMV 0x0008
/** Device is port representor */
#define RTE_ETH_DEV_REPRESENTOR 0x0010
+/** Device does not support MAC change after started */
+#define RTE_ETH_DEV_NOLIVE_MAC_ADDR 0x0020
/**
* Iterates over valid ethdev ports owned by a specific owner.
* @return
* 0 on success and port_id is filled, negative on error
*/
+__rte_deprecated
int rte_eth_dev_attach(const char *devargs, uint16_t *port_id);
/**
* @return
* 0 on success and devname is filled, negative on error
*/
+__rte_deprecated
int rte_eth_dev_detach(uint16_t port_id, char *devname);
/**
* the [rt]x_offload_capa returned from rte_eth_dev_infos_get().
* Any type of device supported offloading set in the input argument
* eth_conf->[rt]xmode.offloads to rte_eth_dev_configure() is enabled
- * on all queues and it can't be disabled in rte_eth_[rt]x_queue_setup().
- * - the Receive Side Scaling (RSS) configuration when using multiple RX
- * queues per port.
+ * on all queues and it can't be disabled in rte_eth_[rt]x_queue_setup()
+ * - the Receive Side Scaling (RSS) configuration when using multiple RX
+ * queues per port. Any RSS hash function set in eth_conf->rss_conf.rss_hf
+ * must be within the flow_type_rss_offloads provided by drivers via
+ * rte_eth_dev_infos_get() API.
*
* Embedding all configuration information in a single data structure
* is the more flexible method that allows the addition of new features
* The *tx_rs_thresh* value should be less or equal then
* *tx_free_thresh* value, and both of them should be less then
* *nb_tx_desc* - 3.
- * - The *txq_flags* member contains flags to pass to the TX queue setup
- * function to configure the behavior of the TX queue. This should be set
- * to 0 if no special configuration is required.
- * This API is obsolete and will be deprecated. Applications
- * should set it to ETH_TXQ_FLAGS_IGNORE and use
- * the offloads field below.
* - The *offloads* member contains Tx offloads to be enabled.
* If an offloading set in tx_conf->offloads
* hasn't been set in the input argument eth_conf->txmode.offloads
* The device start step is the last one and consists of setting the configured
* offload features and in starting the transmit and the receive units of the
* device.
+ *
+ * Device RTE_ETH_DEV_NOLIVE_MAC_ADDR flag causes MAC address to be set before
+ * PMD port start callback function is invoked.
+ *
* On success, all basic functions exported by the Ethernet API (link status,
* receive/transmit, and so on) can be invoked.
*
/**
* Close a stopped Ethernet device. The device cannot be restarted!
- * The function frees all resources except for needed by the
- * closed state. To free these resources, call rte_eth_dev_detach().
+ * The function frees all port resources if the driver supports
+ * the flag RTE_ETH_DEV_CLOSE_REMOVE.
*
* @param port_id
* The port identifier of the Ethernet device.
/**
* Retrieve names of extended statistics of an Ethernet device.
*
+ * There is an assumption that 'xstat_names' and 'xstats' arrays are matched
+ * by array index:
+ * xstats_names[i].name => xstats[i].value
+ *
+ * And the array index is same with id field of 'struct rte_eth_xstat':
+ * xstats[i].id == i
+ *
+ * This assumption makes key-value pair matching less flexible but simpler.
+ *
* @param port_id
* The port identifier of the Ethernet device.
* @param xstats_names
/**
* Retrieve extended statistics of an Ethernet device.
*
+ * There is an assumption that 'xstat_names' and 'xstats' arrays are matched
+ * by array index:
+ * xstats_names[i].name => xstats[i].value
+ *
+ * And the array index is same with id field of 'struct rte_eth_xstat':
+ * xstats[i].id == i
+ *
+ * This assumption makes key-value pair matching less flexible but simpler.
+ *
* @param port_id
* The port identifier of the Ethernet device.
* @param xstats
* A pointer to a table of structure of type *rte_eth_xstat*
- * to be filled with device statistics ids and values: id is the
- * index of the name string in xstats_names (see rte_eth_xstats_get_names()),
- * and value is the statistic counter.
+ * to be filled with device statistics ids and values.
* This parameter can be set to NULL if n is 0.
* @param n
* The size of the xstats array (number of elements).
* @param stat_idx
* The per-queue packet statistics functionality number that the transmit
* queue is to be assigned.
- * The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1].
+ * The value must be in the range [0, RTE_ETHDEV_QUEUE_STAT_CNTRS - 1].
* @return
* Zero if successful. Non-zero otherwise.
*/
* @param stat_idx
* The per-queue packet statistics functionality number that the receive
* queue is to be assigned.
- * The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1].
+ * The value must be in the range [0, RTE_ETHDEV_QUEUE_STAT_CNTRS - 1].
* @return
* Zero if successful. Non-zero otherwise.
*/
int rte_eth_dev_rx_intr_ctl_q(uint16_t port_id, uint16_t queue_id,
int epfd, int op, void *data);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Get interrupt fd per Rx queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - (>=0) the interrupt fd associated to the requested Rx queue if
+ * successful.
+ * - (-1) on error.
+ */
+int __rte_experimental
+rte_eth_dev_rx_intr_ctl_q_get_fd(uint16_t port_id, uint16_t queue_id);
+
/**
* Turn on the LED on the Ethernet device.
* This function turns on the LED on the Ethernet device.
uint8_t en);
/**
-* Get the port id from pci address or device name
-* Ex: 0000:2:00.0 or vdev name net_pcap0
+* Get the port id from device name. The device name should be specified
+* as below:
+* - PCIe address (Domain:Bus:Device.Function), for example- 0000:2:00.0
+* - SoC device name, for example- fsl-gmac0
+* - vdev dpdk name, for example- net_[pcap0|null0|tap0]
*
* @param name
* pci address or name of the device
rte_eth_dev_get_port_by_name(const char *name, uint16_t *port_id);
/**
-* Get the device name from port id
+* Get the device name from port id. The device name is specified as below:
+* - PCIe address (Domain:Bus:Device.Function), for example- 0000:02:00.0
+* - SoC device name, for example- fsl-gmac0
+* - vdev dpdk name, for example- net_[pcap0|null0|tun0|tap0]
*
* @param port_id
* Port identifier of the device.
struct rte_mbuf **rx_pkts, const uint16_t nb_pkts)
{
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ uint16_t nb_rx;
#ifdef RTE_LIBRTE_ETHDEV_DEBUG
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0);
RTE_FUNC_PTR_OR_ERR_RET(*dev->rx_pkt_burst, 0);
if (queue_id >= dev->data->nb_rx_queues) {
- RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", queue_id);
+ RTE_ETHDEV_LOG(ERR, "Invalid RX queue_id=%u\n", queue_id);
return 0;
}
#endif
- int16_t nb_rx = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id],
- rx_pkts, nb_pkts);
+ nb_rx = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id],
+ rx_pkts, nb_pkts);
#ifdef RTE_ETHDEV_RXTX_CALLBACKS
- struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id];
+ if (unlikely(dev->post_rx_burst_cbs[queue_id] != NULL)) {
+ struct rte_eth_rxtx_callback *cb =
+ dev->post_rx_burst_cbs[queue_id];
- if (unlikely(cb != NULL)) {
do {
nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx,
nb_pkts, cb->param);
if (queue_id >= dev->data->nb_rx_queues)
return -EINVAL;
- return (*dev->dev_ops->rx_queue_count)(dev, queue_id);
+ return (int)(*dev->dev_ops->rx_queue_count)(dev, queue_id);
}
/**
*
* If the PMD is DEV_TX_OFFLOAD_MT_LOCKFREE capable, multiple threads can
* invoke this function concurrently on the same tx queue without SW lock.
- * @see rte_eth_dev_info_get, struct rte_eth_txconf::txq_flags
+ * @see rte_eth_dev_info_get, struct rte_eth_txconf::offloads
*
* @see rte_eth_tx_prepare to perform some prior checks or adjustments
* for offloads.
RTE_FUNC_PTR_OR_ERR_RET(*dev->tx_pkt_burst, 0);
if (queue_id >= dev->data->nb_tx_queues) {
- RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id);
+ RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n", queue_id);
return 0;
}
#endif
#ifdef RTE_LIBRTE_ETHDEV_DEBUG
if (!rte_eth_dev_is_valid_port(port_id)) {
- RTE_PMD_DEBUG_TRACE("Invalid TX port_id=%d\n", port_id);
+ RTE_ETHDEV_LOG(ERR, "Invalid TX port_id=%u\n", port_id);
rte_errno = -EINVAL;
return 0;
}
#ifdef RTE_LIBRTE_ETHDEV_DEBUG
if (queue_id >= dev->data->nb_tx_queues) {
- RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id);
+ RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n", queue_id);
rte_errno = -EINVAL;
return 0;
}
git.droids-corp.org / dpdk.git / blobdiff