#include <rte_byteorder.h>
#include <rte_esp.h>
#include <rte_higig.h>
+#include <rte_ecpri.h>
#include <rte_mbuf.h>
#include <rte_mbuf_dyn.h>
*/
RTE_FLOW_ITEM_TYPE_L2TPV3OIP,
+ /**
+ * Matches PFCP Header.
+ * See struct rte_flow_item_pfcp.
+ *
+ */
+ RTE_FLOW_ITEM_TYPE_PFCP,
+
+ /**
+ * Matches eCPRI Header.
+ *
+ * Configure flow for eCPRI over ETH or UDP packets.
+ *
+ * See struct rte_flow_item_ecpri.
+ */
+ RTE_FLOW_ITEM_TYPE_ECPRI,
+
+ /**
+ * Matches the presence of IPv6 fragment extension header.
+ *
+ * See struct rte_flow_item_ipv6_frag_ext.
+ */
+ RTE_FLOW_ITEM_TYPE_IPV6_FRAG_EXT,
};
/**
* the latter case, @p type refers to that of the outer header, with the
* inner EtherType/TPID provided by the subsequent pattern item. This is the
* same order as on the wire.
+ * If the @p type field contains a TPID value, then only tagged packets with the
+ * specified TPID will match the pattern.
+ * The field @p has_vlan can be used to match any type of tagged packets,
+ * instead of using the @p type field.
+ * If the @p type and @p has_vlan fields are not specified, then both tagged
+ * and untagged packets will match the pattern.
*/
struct rte_flow_item_eth {
struct rte_ether_addr dst; /**< Destination MAC. */
struct rte_ether_addr src; /**< Source MAC. */
rte_be16_t type; /**< EtherType or TPID. */
+ uint32_t has_vlan:1; /**< Packet header contains at least one VLAN. */
+ uint32_t reserved:31; /**< Reserved, must be zero. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_ETH. */
* The corresponding standard outer EtherType (TPID) values are
* RTE_ETHER_TYPE_VLAN or RTE_ETHER_TYPE_QINQ. It can be overridden by
* the preceding pattern item.
+ * If a @p VLAN item is present in the pattern, then only tagged packets will
+ * match the pattern.
+ * The field @p has_more_vlan can be used to match any type of tagged packets,
+ * instead of using the @p inner_type field.
+ * If the @p inner_type and @p has_more_vlan fields are not specified,
+ * then any tagged packets will match the pattern.
*/
struct rte_flow_item_vlan {
rte_be16_t tci; /**< Tag control information. */
rte_be16_t inner_type; /**< Inner EtherType or TPID. */
+ uint32_t has_more_vlan:1;
+ /**< Packet header contains at least one more VLAN, after this VLAN. */
+ uint32_t reserved:31; /**< Reserved, must be zero. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_VLAN. */
*
* Matches an IPv6 header.
*
- * Note: IPv6 options are handled by dedicated pattern items, see
- * RTE_FLOW_ITEM_TYPE_IPV6_EXT.
+ * Dedicated flags indicate if header contains specific extension headers.
*/
struct rte_flow_item_ipv6 {
struct rte_ipv6_hdr hdr; /**< IPv6 header definition. */
+ uint32_t has_hop_ext:1;
+ /**< Header contains Hop-by-Hop Options extension header. */
+ uint32_t has_route_ext:1;
+ /**< Header contains Routing extension header. */
+ uint32_t has_frag_ext:1;
+ /**< Header contains Fragment extension header. */
+ uint32_t has_auth_ext:1;
+ /**< Header contains Authentication extension header. */
+ uint32_t has_esp_ext:1;
+ /**< Header contains Encapsulation Security Payload extension header. */
+ uint32_t has_dest_ext:1;
+ /**< Header contains Destination Options extension header. */
+ uint32_t has_mobil_ext:1;
+ /**< Header contains Mobility extension header. */
+ uint32_t has_hip_ext:1;
+ /**< Header contains Host Identity Protocol extension header. */
+ uint32_t has_shim6_ext:1;
+ /**< Header contains Shim6 Protocol extension header. */
+ uint32_t reserved:23;
+ /**< Reserved for future extension headers, must be zero. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_IPV6. */
};
#endif
+/**
+ * RTE_FLOW_ITEM_TYPE_IPV6_FRAG_EXT
+ *
+ * Matches the presence of IPv6 fragment extension header.
+ *
+ * Preceded by any of:
+ *
+ * - RTE_FLOW_ITEM_TYPE_IPV6
+ * - RTE_FLOW_ITEM_TYPE_IPV6_EXT
+ */
+struct rte_flow_item_ipv6_frag_ext {
+ struct rte_ipv6_fragment_ext hdr;
+};
+
/**
* RTE_FLOW_ITEM_TYPE_ICMP6
*
};
#endif
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_PFCP
+ *
+ * Match PFCP Header
+ */
+struct rte_flow_item_pfcp {
+ uint8_t s_field;
+ uint8_t msg_type;
+ rte_be16_t msg_len;
+ rte_be64_t seid;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_PFCP. */
+#ifndef __cplusplus
+static const struct rte_flow_item_pfcp rte_flow_item_pfcp_mask = {
+ .s_field = 0x01,
+ .seid = RTE_BE64(UINT64_C(0xffffffffffffffff)),
+};
+#endif
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_ECPRI
+ *
+ * Match eCPRI Header
+ */
+struct rte_flow_item_ecpri {
+ struct rte_ecpri_combined_msg_hdr hdr;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_ECPRI. */
+#ifndef __cplusplus
+static const struct rte_flow_item_ecpri rte_flow_item_ecpri_mask = {
+ .hdr = {
+ .common = {
+ .u32 = 0x0,
+ },
+ },
+};
+#endif
+
/**
* Matching pattern item definition.
*
/**
* Enables counters for this flow rule.
*
- * These counters can be retrieved and reset through rte_flow_query(),
+ * These counters can be retrieved and reset through rte_flow_query() or
+ * rte_flow_shared_action_query() if the action provided via handle,
* see struct rte_flow_query_count.
*
* See struct rte_flow_action_count.
* See struct rte_flow_action_set_dscp.
*/
RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP,
+
+ /**
+ * Report as aged flow if timeout passed without any matching on the
+ * flow.
+ *
+ * See struct rte_flow_action_age.
+ * See function rte_flow_get_aged_flows
+ * see enum RTE_ETH_EVENT_FLOW_AGED
+ * See struct rte_flow_query_age
+ */
+ RTE_FLOW_ACTION_TYPE_AGE,
+
+ /**
+ * The matching packets will be duplicated with specified ratio and
+ * applied with own set of actions with a fate action.
+ *
+ * See struct rte_flow_action_sample.
+ */
+ RTE_FLOW_ACTION_TYPE_SAMPLE,
+
+ /**
+ * Describe action shared across multiple flow rules.
+ *
+ * Allow multiple rules reference the same action by handle (see
+ * struct rte_flow_shared_action).
+ */
+ RTE_FLOW_ACTION_TYPE_SHARED,
};
/**
uint16_t index; /**< Queue index to use. */
};
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ACTION_TYPE_AGE
+ *
+ * Report flow as aged-out if timeout passed without any matching
+ * on the flow. RTE_ETH_EVENT_FLOW_AGED event is triggered when a
+ * port detects new aged-out flows.
+ *
+ * The flow context and the flow handle will be reported by the
+ * rte_flow_get_aged_flows API.
+ */
+struct rte_flow_action_age {
+ uint32_t timeout:24; /**< Time in seconds. */
+ uint32_t reserved:8; /**< Reserved, must be zero. */
+ void *context;
+ /**< The user flow context, NULL means the rte_flow pointer. */
+};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_AGE (query)
+ *
+ * Query structure to retrieve the aging status information of a
+ * shared AGE action, or a flow rule using the AGE action.
+ */
+struct rte_flow_query_age {
+ uint32_t reserved:6; /**< Reserved, must be zero. */
+ uint32_t aged:1; /**< 1 if aging timeout expired, 0 otherwise. */
+ uint32_t sec_since_last_hit_valid:1;
+ /**< sec_since_last_hit value is valid. */
+ uint32_t sec_since_last_hit:24; /**< Seconds since last traffic hit. */
+};
/**
* @warning
uint8_t dscp;
};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_SHARED
+ *
+ * Opaque type returned after successfully creating a shared action.
+ *
+ * This handle can be used to manage and query the related action:
+ * - share it across multiple flow rules
+ * - update action configuration
+ * - query action data
+ * - destroy action
+ */
+struct rte_flow_shared_action;
+
/* Mbuf dynamic field offset for metadata. */
-extern int rte_flow_dynf_metadata_offs;
+extern int32_t rte_flow_dynf_metadata_offs;
/* Mbuf dynamic field flag mask for metadata. */
extern uint64_t rte_flow_dynf_metadata_mask;
*/
struct rte_flow;
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ACTION_TYPE_SAMPLE
+ *
+ * Adds a sample action to a matched flow.
+ *
+ * The matching packets will be duplicated with specified ratio and applied
+ * with own set of actions with a fate action, the sampled packet could be
+ * redirected to queue or port. All the packets continue processing on the
+ * default flow path.
+ *
+ * When the sample ratio is set to 1 then the packets will be 100% mirrored.
+ * Additional action list be supported to add for sampled or mirrored packets.
+ */
+struct rte_flow_action_sample {
+ uint32_t ratio; /**< packets sampled equals to '1/ratio'. */
+ const struct rte_flow_action *actions;
+ /**< sub-action list specific for the sampling hit cases. */
+};
+
/**
* Verbose error types.
*
const void *src,
struct rte_flow_error *error);
+/**
+ * Get aged-out flows of a given port.
+ *
+ * RTE_ETH_EVENT_FLOW_AGED event will be triggered when at least one new aged
+ * out flow was detected after the last call to rte_flow_get_aged_flows.
+ * This function can be called to get the aged flows usynchronously from the
+ * event callback or synchronously regardless the event.
+ * This is not safe to call rte_flow_get_aged_flows function with other flow
+ * functions from multiple threads simultaneously.
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in, out] contexts
+ * The address of an array of pointers to the aged-out flows contexts.
+ * @param[in] nb_contexts
+ * The length of context array pointers.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. Initialized in case of
+ * error only.
+ *
+ * @return
+ * if nb_contexts is 0, return the amount of all aged contexts.
+ * if nb_contexts is not 0 , return the amount of aged flows reported
+ * in the context array, otherwise negative errno value.
+ *
+ * @see rte_flow_action_age
+ * @see RTE_ETH_EVENT_FLOW_AGED
+ */
+__rte_experimental
+int
+rte_flow_get_aged_flows(uint16_t port_id, void **contexts,
+ uint32_t nb_contexts, struct rte_flow_error *error);
+
+/**
+ * Specify shared action configuration
+ */
+struct rte_flow_shared_action_conf {
+ /**
+ * Flow direction for shared action configuration.
+ *
+ * Shared action should be valid at least for one flow direction,
+ * otherwise it is invalid for both ingress and egress rules.
+ */
+ uint32_t ingress:1;
+ /**< Action valid for rules applied to ingress traffic. */
+ uint32_t egress:1;
+ /**< Action valid for rules applied to egress traffic. */
+
+ /**
+ * When set to 1, indicates that the action is valid for
+ * transfer traffic; otherwise, for non-transfer traffic.
+ *
+ * See struct rte_flow_attr.
+ */
+ uint32_t transfer:1;
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Create shared action for reuse in multiple flow rules.
+ * The created shared action has single state and configuration
+ * across all flow rules using it.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] conf
+ * Shared action configuration.
+ * @param[in] action
+ * Action configuration for shared action creation.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ * @return
+ * A valid handle in case of success, NULL otherwise and rte_errno is set
+ * to one of the error codes defined:
+ * - (ENODEV) if *port_id* invalid.
+ * - (ENOSYS) if underlying device does not support this functionality.
+ * - (EIO) if underlying device is removed.
+ * - (EINVAL) if *action* invalid.
+ * - (ENOTSUP) if *action* valid but unsupported.
+ */
+__rte_experimental
+struct rte_flow_shared_action *
+rte_flow_shared_action_create(uint16_t port_id,
+ const struct rte_flow_shared_action_conf *conf,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Destroy the shared action by handle.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] action
+ * Handle for the shared action to be destroyed.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ * @return
+ * - (0) if success.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-ENOSYS) if underlying device does not support this functionality.
+ * - (-EIO) if underlying device is removed.
+ * - (-ENOENT) if action pointed by *action* handle was not found.
+ * - (-EBUSY) if action pointed by *action* handle still used by some rules
+ * rte_errno is also set.
+ */
+__rte_experimental
+int
+rte_flow_shared_action_destroy(uint16_t port_id,
+ struct rte_flow_shared_action *action,
+ struct rte_flow_error *error);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Update in-place the shared action configuration pointed by *action* handle
+ * with the configuration provided as *update* argument.
+ * The update of the shared action configuration effects all flow rules reusing
+ * the action via handle.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] action
+ * Handle for the shared action to be updated.
+ * @param[in] update
+ * Action specification used to modify the action pointed by handle.
+ * *update* should be of same type with the action pointed by the *action*
+ * handle argument, otherwise considered as invalid.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ * @return
+ * - (0) if success.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-ENOSYS) if underlying device does not support this functionality.
+ * - (-EIO) if underlying device is removed.
+ * - (-EINVAL) if *update* invalid.
+ * - (-ENOTSUP) if *update* valid but unsupported.
+ * - (-ENOENT) if action pointed by *ctx* was not found.
+ * rte_errno is also set.
+ */
+__rte_experimental
+int
+rte_flow_shared_action_update(uint16_t port_id,
+ struct rte_flow_shared_action *action,
+ const struct rte_flow_action *update,
+ struct rte_flow_error *error);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Query the shared action by handle.
+ *
+ * Retrieve action-specific data such as counters.
+ * Data is gathered by special action which may be present/referenced in
+ * more than one flow rule definition.
+ *
+ * \see RTE_FLOW_ACTION_TYPE_COUNT
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in] action
+ * Handle for the shared action to query.
+ * @param[in, out] data
+ * Pointer to storage for the associated query data type.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_shared_action_query(uint16_t port_id,
+ const struct rte_flow_shared_action *action,
+ void *data,
+ struct rte_flow_error *error);
+
+/* Tunnel has a type and the key information. */
+struct rte_flow_tunnel {
+ /**
+ * Tunnel type, for example RTE_FLOW_ITEM_TYPE_VXLAN,
+ * RTE_FLOW_ITEM_TYPE_NVGRE etc.
+ */
+ enum rte_flow_item_type type;
+ uint64_t tun_id; /**< Tunnel identification. */
+
+ RTE_STD_C11
+ union {
+ struct {
+ rte_be32_t src_addr; /**< IPv4 source address. */
+ rte_be32_t dst_addr; /**< IPv4 destination address. */
+ } ipv4;
+ struct {
+ uint8_t src_addr[16]; /**< IPv6 source address. */
+ uint8_t dst_addr[16]; /**< IPv6 destination address. */
+ } ipv6;
+ };
+ rte_be16_t tp_src; /**< Tunnel port source. */
+ rte_be16_t tp_dst; /**< Tunnel port destination. */
+ uint16_t tun_flags; /**< Tunnel flags. */
+
+ bool is_ipv6; /**< True for valid IPv6 fields. Otherwise IPv4. */
+
+ /**
+ * the following members are required to restore packet
+ * after miss
+ */
+ uint8_t tos; /**< TOS for IPv4, TC for IPv6. */
+ uint8_t ttl; /**< TTL for IPv4, HL for IPv6. */
+ uint32_t label; /**< Flow Label for IPv6. */
+};
+
+/**
+ * Indicate that the packet has a tunnel.
+ */
+#define RTE_FLOW_RESTORE_INFO_TUNNEL (1ULL << 0)
+
+/**
+ * Indicate that the packet has a non decapsulated tunnel header.
+ */
+#define RTE_FLOW_RESTORE_INFO_ENCAPSULATED (1ULL << 1)
+
+/**
+ * Indicate that the packet has a group_id.
+ */
+#define RTE_FLOW_RESTORE_INFO_GROUP_ID (1ULL << 2)
+
+/**
+ * Restore information structure to communicate the current packet processing
+ * state when some of the processing pipeline is done in hardware and should
+ * continue in software.
+ */
+struct rte_flow_restore_info {
+ /**
+ * Bitwise flags (RTE_FLOW_RESTORE_INFO_*) to indicate validation of
+ * other fields in struct rte_flow_restore_info.
+ */
+ uint64_t flags;
+ uint32_t group_id; /**< Group ID where packed missed */
+ struct rte_flow_tunnel tunnel; /**< Tunnel information. */
+};
+
+/**
+ * Allocate an array of actions to be used in rte_flow_create, to implement
+ * tunnel-decap-set for the given tunnel.
+ * Sample usage:
+ * actions vxlan_decap / tunnel-decap-set(tunnel properties) /
+ * jump group 0 / end
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in] tunnel
+ * Tunnel properties.
+ * @param[out] actions
+ * Array of actions to be allocated by the PMD. This array should be
+ * concatenated with the actions array provided to rte_flow_create.
+ * @param[out] num_of_actions
+ * Number of actions allocated.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_tunnel_decap_set(uint16_t port_id,
+ struct rte_flow_tunnel *tunnel,
+ struct rte_flow_action **actions,
+ uint32_t *num_of_actions,
+ struct rte_flow_error *error);
+
+/**
+ * Allocate an array of items to be used in rte_flow_create, to implement
+ * tunnel-match for the given tunnel.
+ * Sample usage:
+ * pattern tunnel-match(tunnel properties) / outer-header-matches /
+ * inner-header-matches / end
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in] tunnel
+ * Tunnel properties.
+ * @param[out] items
+ * Array of items to be allocated by the PMD. This array should be
+ * concatenated with the items array provided to rte_flow_create.
+ * @param[out] num_of_items
+ * Number of items allocated.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_tunnel_match(uint16_t port_id,
+ struct rte_flow_tunnel *tunnel,
+ struct rte_flow_item **items,
+ uint32_t *num_of_items,
+ struct rte_flow_error *error);
+
+/**
+ * Populate the current packet processing state, if exists, for the given mbuf.
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in] m
+ * Mbuf struct.
+ * @param[out] info
+ * Restore information. Upon success contains the HW state.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_get_restore_info(uint16_t port_id,
+ struct rte_mbuf *m,
+ struct rte_flow_restore_info *info,
+ struct rte_flow_error *error);
+
+/**
+ * Release the action array as allocated by rte_flow_tunnel_decap_set.
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in] actions
+ * Array of actions to be released.
+ * @param[in] num_of_actions
+ * Number of elements in actions array.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_tunnel_action_decap_release(uint16_t port_id,
+ struct rte_flow_action *actions,
+ uint32_t num_of_actions,
+ struct rte_flow_error *error);
+
+/**
+ * Release the item array as allocated by rte_flow_tunnel_match.
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param[in] items
+ * Array of items to be released.
+ * @param[in] num_of_items
+ * Number of elements in item array.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_tunnel_item_release(uint16_t port_id,
+ struct rte_flow_item *items,
+ uint32_t num_of_items,
+ struct rte_flow_error *error);
#ifdef __cplusplus
}
#endif
git.droids-corp.org / dpdk.git / blobdiff