uint64_t rss_hf; /**< Hash functions to apply - see below. */
};
-/* Supported RSS offloads */
-/* for 1G & 10G */
-#define ETH_RSS_IPV4_SHIFT 0
-#define ETH_RSS_IPV4_TCP_SHIFT 1
-#define ETH_RSS_IPV6_SHIFT 2
-#define ETH_RSS_IPV6_EX_SHIFT 3
-#define ETH_RSS_IPV6_TCP_SHIFT 4
-#define ETH_RSS_IPV6_TCP_EX_SHIFT 5
-#define ETH_RSS_IPV4_UDP_SHIFT 6
-#define ETH_RSS_IPV6_UDP_SHIFT 7
-#define ETH_RSS_IPV6_UDP_EX_SHIFT 8
-/* for 40G only */
-#define ETH_RSS_NONF_IPV4_UDP_SHIFT 31
-#define ETH_RSS_NONF_IPV4_TCP_SHIFT 33
-#define ETH_RSS_NONF_IPV4_SCTP_SHIFT 34
-#define ETH_RSS_NONF_IPV4_OTHER_SHIFT 35
-#define ETH_RSS_FRAG_IPV4_SHIFT 36
-#define ETH_RSS_NONF_IPV6_UDP_SHIFT 41
-#define ETH_RSS_NONF_IPV6_TCP_SHIFT 43
-#define ETH_RSS_NONF_IPV6_SCTP_SHIFT 44
-#define ETH_RSS_NONF_IPV6_OTHER_SHIFT 45
-#define ETH_RSS_FRAG_IPV6_SHIFT 46
-#define ETH_RSS_FCOE_OX_SHIFT 48
-#define ETH_RSS_FCOE_RX_SHIFT 49
-#define ETH_RSS_FCOE_OTHER_SHIFT 50
-#define ETH_RSS_L2_PAYLOAD_SHIFT 63
-
-/* for 1G & 10G */
-#define ETH_RSS_IPV4 (1 << ETH_RSS_IPV4_SHIFT)
-#define ETH_RSS_IPV4_TCP (1 << ETH_RSS_IPV4_TCP_SHIFT)
-#define ETH_RSS_IPV6 (1 << ETH_RSS_IPV6_SHIFT)
-#define ETH_RSS_IPV6_EX (1 << ETH_RSS_IPV6_EX_SHIFT)
-#define ETH_RSS_IPV6_TCP (1 << ETH_RSS_IPV6_TCP_SHIFT)
-#define ETH_RSS_IPV6_TCP_EX (1 << ETH_RSS_IPV6_TCP_EX_SHIFT)
-#define ETH_RSS_IPV4_UDP (1 << ETH_RSS_IPV4_UDP_SHIFT)
-#define ETH_RSS_IPV6_UDP (1 << ETH_RSS_IPV6_UDP_SHIFT)
-#define ETH_RSS_IPV6_UDP_EX (1 << ETH_RSS_IPV6_UDP_EX_SHIFT)
-/* for 40G only */
-#define ETH_RSS_NONF_IPV4_UDP (1ULL << ETH_RSS_NONF_IPV4_UDP_SHIFT)
-#define ETH_RSS_NONF_IPV4_TCP (1ULL << ETH_RSS_NONF_IPV4_TCP_SHIFT)
-#define ETH_RSS_NONF_IPV4_SCTP (1ULL << ETH_RSS_NONF_IPV4_SCTP_SHIFT)
-#define ETH_RSS_NONF_IPV4_OTHER (1ULL << ETH_RSS_NONF_IPV4_OTHER_SHIFT)
-#define ETH_RSS_FRAG_IPV4 (1ULL << ETH_RSS_FRAG_IPV4_SHIFT)
-#define ETH_RSS_NONF_IPV6_UDP (1ULL << ETH_RSS_NONF_IPV6_UDP_SHIFT)
-#define ETH_RSS_NONF_IPV6_TCP (1ULL << ETH_RSS_NONF_IPV6_TCP_SHIFT)
-#define ETH_RSS_NONF_IPV6_SCTP (1ULL << ETH_RSS_NONF_IPV6_SCTP_SHIFT)
-#define ETH_RSS_NONF_IPV6_OTHER (1ULL << ETH_RSS_NONF_IPV6_OTHER_SHIFT)
-#define ETH_RSS_FRAG_IPV6 (1ULL << ETH_RSS_FRAG_IPV6_SHIFT)
-/* FCOE relevant should not be used */
-#define ETH_RSS_FCOE_OX (1ULL << ETH_RSS_FCOE_OX_SHIFT)
-#define ETH_RSS_FCOE_RX (1ULL << ETH_RSS_FCOE_RX_SHIFT)
-#define ETH_RSS_FCOE_OTHER (1ULL << ETH_RSS_FCOE_OTHER_SHIFT)
-#define ETH_RSS_L2_PAYLOAD (1ULL << ETH_RSS_L2_PAYLOAD_SHIFT)
+/*
+ * The RSS offload types are defined based on flow types which are defined
+ * in rte_eth_ctrl.h. Different NIC hardwares may support different RSS offload
+ * types. The supported flow types or RSS offload types can be queried by
+ * rte_eth_dev_info_get().
+ */
+#define ETH_RSS_IPV4 (1ULL << RTE_ETH_FLOW_IPV4)
+#define ETH_RSS_FRAG_IPV4 (1ULL << RTE_ETH_FLOW_FRAG_IPV4)
+#define ETH_RSS_NONFRAG_IPV4_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_TCP)
+#define ETH_RSS_NONFRAG_IPV4_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_UDP)
+#define ETH_RSS_NONFRAG_IPV4_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_SCTP)
+#define ETH_RSS_NONFRAG_IPV4_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_OTHER)
+#define ETH_RSS_IPV6 (1ULL << RTE_ETH_FLOW_IPV6)
+#define ETH_RSS_FRAG_IPV6 (1ULL << RTE_ETH_FLOW_FRAG_IPV6)
+#define ETH_RSS_NONFRAG_IPV6_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_TCP)
+#define ETH_RSS_NONFRAG_IPV6_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_UDP)
+#define ETH_RSS_NONFRAG_IPV6_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_SCTP)
+#define ETH_RSS_NONFRAG_IPV6_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_OTHER)
+#define ETH_RSS_L2_PAYLOAD (1ULL << RTE_ETH_FLOW_L2_PAYLOAD)
+#define ETH_RSS_IPV6_EX (1ULL << RTE_ETH_FLOW_IPV6_EX)
+#define ETH_RSS_IPV6_TCP_EX (1ULL << RTE_ETH_FLOW_IPV6_TCP_EX)
+#define ETH_RSS_IPV6_UDP_EX (1ULL << RTE_ETH_FLOW_IPV6_UDP_EX)
#define ETH_RSS_IP ( \
- ETH_RSS_IPV4 | \
- ETH_RSS_IPV6 | \
- ETH_RSS_NONF_IPV4_OTHER | \
- ETH_RSS_FRAG_IPV4 | \
- ETH_RSS_NONF_IPV6_OTHER | \
- ETH_RSS_FRAG_IPV6)
+ ETH_RSS_IPV4 | \
+ ETH_RSS_FRAG_IPV4 | \
+ ETH_RSS_NONFRAG_IPV4_OTHER | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_FRAG_IPV6 | \
+ ETH_RSS_NONFRAG_IPV6_OTHER | \
+ ETH_RSS_IPV6_EX)
+
#define ETH_RSS_UDP ( \
- ETH_RSS_IPV4 | \
- ETH_RSS_IPV6 | \
- ETH_RSS_IPV4_UDP | \
- ETH_RSS_IPV6_UDP | \
- ETH_RSS_IPV6_UDP_EX | \
- ETH_RSS_NONF_IPV4_UDP | \
- ETH_RSS_NONF_IPV6_UDP)
+ ETH_RSS_NONFRAG_IPV4_UDP | \
+ ETH_RSS_NONFRAG_IPV6_UDP | \
+ ETH_RSS_IPV6_UDP_EX)
+
+#define ETH_RSS_TCP ( \
+ ETH_RSS_NONFRAG_IPV4_TCP | \
+ ETH_RSS_NONFRAG_IPV6_TCP | \
+ ETH_RSS_IPV6_TCP_EX)
+
+#define ETH_RSS_SCTP ( \
+ ETH_RSS_NONFRAG_IPV4_SCTP | \
+ ETH_RSS_NONFRAG_IPV6_SCTP)
+
/**< Mask of valid RSS hash protocols */
#define ETH_RSS_PROTO_MASK ( \
- ETH_RSS_IPV4 | \
- ETH_RSS_IPV4_TCP | \
- ETH_RSS_IPV6 | \
- ETH_RSS_IPV6_EX | \
- ETH_RSS_IPV6_TCP | \
- ETH_RSS_IPV6_TCP_EX | \
- ETH_RSS_IPV4_UDP | \
- ETH_RSS_IPV6_UDP | \
- ETH_RSS_IPV6_UDP_EX | \
- ETH_RSS_NONF_IPV4_UDP | \
- ETH_RSS_NONF_IPV4_TCP | \
- ETH_RSS_NONF_IPV4_SCTP | \
- ETH_RSS_NONF_IPV4_OTHER | \
- ETH_RSS_FRAG_IPV4 | \
- ETH_RSS_NONF_IPV6_UDP | \
- ETH_RSS_NONF_IPV6_TCP | \
- ETH_RSS_NONF_IPV6_SCTP | \
- ETH_RSS_NONF_IPV6_OTHER | \
- ETH_RSS_FRAG_IPV6 | \
- ETH_RSS_L2_PAYLOAD)
-
-/* Definitions used for redirection table entry size */
-#define ETH_RSS_RETA_NUM_ENTRIES 128
-#define ETH_RSS_RETA_MAX_QUEUE 16
+ ETH_RSS_IPV4 | \
+ ETH_RSS_FRAG_IPV4 | \
+ ETH_RSS_NONFRAG_IPV4_TCP | \
+ ETH_RSS_NONFRAG_IPV4_UDP | \
+ ETH_RSS_NONFRAG_IPV4_SCTP | \
+ ETH_RSS_NONFRAG_IPV4_OTHER | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_FRAG_IPV6 | \
+ ETH_RSS_NONFRAG_IPV6_TCP | \
+ ETH_RSS_NONFRAG_IPV6_UDP | \
+ ETH_RSS_NONFRAG_IPV6_SCTP | \
+ ETH_RSS_NONFRAG_IPV6_OTHER | \
+ ETH_RSS_L2_PAYLOAD | \
+ ETH_RSS_IPV6_EX | \
+ ETH_RSS_IPV6_TCP_EX | \
+ ETH_RSS_IPV6_UDP_EX)
+
+/*
+ * Definitions used for redirection table entry size.
+ * Some RSS RETA sizes may not be supported by some drivers, check the
+ * documentation or the description of relevant functions for more details.
+ */
+#define ETH_RSS_RETA_SIZE_64 64
+#define ETH_RSS_RETA_SIZE_128 128
+#define ETH_RSS_RETA_SIZE_512 512
+#define RTE_RETA_GROUP_SIZE 64
/* Definitions used for VMDQ and DCB functionality */
#define ETH_VMDQ_MAX_VLAN_FILTERS 64 /**< Maximum nb. of VMDQ vlan filters. */
};
/**
- * A structure used to configure Redirection Table of the Receive Side
- * Scaling (RSS) feature of an Ethernet port.
+ * A structure used to configure 64 entries of Redirection Table of the
+ * Receive Side Scaling (RSS) feature of an Ethernet port. To configure
+ * more than 64 entries supported by hardware, an array of this structure
+ * is needed.
*/
-struct rte_eth_rss_reta {
- /** First 64 mask bits indicate which entry(s) need to updated/queried. */
- uint64_t mask_lo;
- /** Second 64 mask bits indicate which entry(s) need to updated/queried. */
- uint64_t mask_hi;
- uint8_t reta[ETH_RSS_RETA_NUM_ENTRIES]; /**< 128 RETA entries*/
+struct rte_eth_rss_reta_entry64 {
+ uint64_t mask;
+ /**< Mask bits indicate which entries need to be updated/queried. */
+ uint8_t reta[RTE_RETA_GROUP_SIZE];
+ /**< Group of 64 redirection table entries. */
};
/**
uint8_t default_pool; /**< The default pool, if applicable */
uint8_t enable_loop_back; /**< Enable VT loop back */
uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
+ uint32_t rx_mode; /**< Flags from ETH_VMDQ_ACCEPT_* */
struct {
uint16_t vlan_id; /**< The vlan id of the received frame */
uint64_t pools; /**< Bitmask of pools for packet rx */
#define ETH_TXQ_FLAGS_NOOFFLOADS \
(ETH_TXQ_FLAGS_NOVLANOFFL | ETH_TXQ_FLAGS_NOXSUMSCTP | \
ETH_TXQ_FLAGS_NOXSUMUDP | ETH_TXQ_FLAGS_NOXSUMTCP)
+#define ETH_TXQ_FLAGS_NOXSUMS \
+ (ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+ ETH_TXQ_FLAGS_NOXSUMTCP)
/**
* A structure used to configure a TX ring of an Ethernet port.
*/
uint8_t priority; /**< VLAN User Priority. */
};
-/**
- * Flow Director setting modes: none (default), signature or perfect.
- */
-enum rte_fdir_mode {
- RTE_FDIR_MODE_NONE = 0, /**< Disable FDIR support. */
- RTE_FDIR_MODE_SIGNATURE, /**< Enable FDIR signature filter mode. */
- RTE_FDIR_MODE_PERFECT, /**< Enable FDIR perfect filter mode. */
-};
-
/**
* Memory space that can be configured to store Flow Director filters
* in the board memory.
enum rte_fdir_mode mode; /**< Flow Director mode. */
enum rte_fdir_pballoc_type pballoc; /**< Space for FDIR filters. */
enum rte_fdir_status_mode status; /**< How to report FDIR hash. */
- /** Offset of flexbytes field in RX packets (in 16-bit word units). */
- uint8_t flexbytes_offset;
/** RX queue of packets matching a "drop" filter in perfect mode. */
uint8_t drop_queue;
+ struct rte_eth_fdir_masks mask;
+ struct rte_eth_fdir_flex_conf flex_conf;
+ /**< Flex payload configuration. */
};
/**
#define DEV_TX_OFFLOAD_SCTP_CKSUM 0x00000010
#define DEV_TX_OFFLOAD_TCP_TSO 0x00000020
#define DEV_TX_OFFLOAD_UDP_TSO 0x00000040
+#define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for tunneling packet. */
struct rte_eth_dev_info {
struct rte_pci_device *pci_dev; /**< Device PCI information. */
uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */
uint32_t rx_offload_capa; /**< Device RX offload capabilities. */
uint32_t tx_offload_capa; /**< Device TX offload capabilities. */
+ uint16_t reta_size;
+ /**< Device redirection table size, the total number of entries. */
+ /** Bit mask of RSS offloads, the bit offset also means flow type */
+ uint64_t flow_type_rss_offloads;
struct rte_eth_rxconf default_rxconf; /**< Default RX configuration */
struct rte_eth_txconf default_txconf; /**< Default TX configuration */
uint16_t vmdq_queue_base; /**< First queue ID for VMDQ pools. */
/** @internal Structure to keep track of registered callbacks */
TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
-#define TCP_UGR_FLAG 0x20
-#define TCP_ACK_FLAG 0x10
-#define TCP_PSH_FLAG 0x08
-#define TCP_RST_FLAG 0x04
-#define TCP_SYN_FLAG 0x02
-#define TCP_FIN_FLAG 0x01
-#define TCP_FLAG_ALL 0x3F
-
-/**
- * A structure used to define an ethertype filter.
- */
-struct rte_ethertype_filter {
- uint16_t ethertype; /**< little endian. */
- uint8_t priority_en; /**< compare priority enable. */
- uint8_t priority;
-};
-
-/**
- * A structure used to define an syn filter.
- */
-struct rte_syn_filter {
- uint8_t hig_pri; /**< 1 means higher pri than 2tuple, 5tupe,
- and flex filter, 0 means lower pri. */
-};
-
-/**
- * A structure used to define a 2tuple filter.
- */
-struct rte_2tuple_filter {
- uint16_t dst_port; /**< big endian. */
- uint8_t protocol;
- uint8_t tcp_flags;
- uint16_t priority; /**< used when more than one filter matches. */
- uint8_t dst_port_mask:1, /**< if mask is 1b, means not compare. */
- protocol_mask:1;
-};
-
-/**
- * A structure used to define a flex filter.
- */
-struct rte_flex_filter {
- uint16_t len;
- uint32_t dwords[32]; /**< flex bytes in big endian. */
- uint8_t mask[16]; /**< if mask bit is 1b, do not compare
- corresponding byte in dwords. */
- uint8_t priority;
-};
-
-/**
- * A structure used to define a 5tuple filter.
- */
-struct rte_5tuple_filter {
- uint32_t dst_ip; /**< destination IP address in big endian. */
- uint32_t src_ip; /**< source IP address in big endian. */
- uint16_t dst_port; /**< destination port in big endian. */
- uint16_t src_port; /**< source Port big endian. */
- uint8_t protocol; /**< l4 protocol. */
- uint8_t tcp_flags; /**< tcp flags. */
- uint16_t priority; /**< seven evels (001b-111b), 111b is highest,
- used when more than one filter matches. */
- uint8_t dst_ip_mask:1, /**< if mask is 1b, do not compare dst ip. */
- src_ip_mask:1, /**< if mask is 1b, do not compare src ip. */
- dst_port_mask:1, /**< if mask is 1b, do not compare dst port. */
- src_port_mask:1, /**< if mask is 1b, do not compare src port. */
- protocol_mask:1; /**< if mask is 1b, do not compare protocol. */
-};
-
/*
* Definitions of all functions exported by an Ethernet driver through the
* the generic structure of type *eth_dev_ops* supplied in the *rte_eth_dev*
/**< @internal Setup priority flow control parameter on an Ethernet device */
typedef int (*reta_update_t)(struct rte_eth_dev *dev,
- struct rte_eth_rss_reta *reta_conf);
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size);
/**< @internal Update RSS redirection table on an Ethernet device */
typedef int (*reta_query_t)(struct rte_eth_dev *dev,
- struct rte_eth_rss_reta *reta_conf);
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size);
/**< @internal Query RSS redirection table on an Ethernet device */
typedef int (*rss_hash_update_t)(struct rte_eth_dev *dev,
uint32_t vmdq);
/**< @internal Set a MAC address into Receive Address Address Register */
+typedef void (*eth_mac_addr_set_t)(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr);
+/**< @internal Set a MAC address into Receive Address Address Register */
+
typedef int (*eth_uc_hash_table_set_t)(struct rte_eth_dev *dev,
struct ether_addr *mac_addr,
uint8_t on);
typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev);
#endif
-typedef int (*eth_add_syn_filter_t)(struct rte_eth_dev *dev,
- struct rte_syn_filter *filter, uint16_t rx_queue);
-/**< @internal add syn filter rule on an Ethernet device */
-
-typedef int (*eth_remove_syn_filter_t)(struct rte_eth_dev *dev);
-/**< @internal remove syn filter rule on an Ethernet device */
-
-typedef int (*eth_get_syn_filter_t)(struct rte_eth_dev *dev,
- struct rte_syn_filter *filter, uint16_t *rx_queue);
-/**< @internal Get syn filter rule on an Ethernet device */
-
-typedef int (*eth_add_ethertype_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_ethertype_filter *filter,
- uint16_t rx_queue);
-/**< @internal Setup a new ethertype filter rule on an Ethernet device */
-
-typedef int (*eth_remove_ethertype_filter_t)(struct rte_eth_dev *dev,
- uint16_t index);
-/**< @internal Remove an ethertype filter rule on an Ethernet device */
-
-typedef int (*eth_get_ethertype_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_ethertype_filter *filter,
- uint16_t *rx_queue);
-/**< @internal Get an ethertype filter rule on an Ethernet device */
-
-typedef int (*eth_add_2tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_2tuple_filter *filter,
- uint16_t rx_queue);
-/**< @internal Setup a new 2tuple filter rule on an Ethernet device */
-
-typedef int (*eth_remove_2tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index);
-/**< @internal Remove a 2tuple filter rule on an Ethernet device */
-
-typedef int (*eth_get_2tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_2tuple_filter *filter,
- uint16_t *rx_queue);
-/**< @internal Get a 2tuple filter rule on an Ethernet device */
-
-typedef int (*eth_add_5tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_5tuple_filter *filter,
- uint16_t rx_queue);
-/**< @internal Setup a new 5tuple filter rule on an Ethernet device */
-
-typedef int (*eth_remove_5tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index);
-/**< @internal Remove a 5tuple filter rule on an Ethernet device */
-
-typedef int (*eth_get_5tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_5tuple_filter *filter,
- uint16_t *rx_queue);
-/**< @internal Get a 5tuple filter rule on an Ethernet device */
-
-typedef int (*eth_add_flex_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_flex_filter *filter,
- uint16_t rx_queue);
-/**< @internal Setup a new flex filter rule on an Ethernet device */
-
-typedef int (*eth_remove_flex_filter_t)(struct rte_eth_dev *dev,
- uint16_t index);
-/**< @internal Remove a flex filter rule on an Ethernet device */
-
-typedef int (*eth_get_flex_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_flex_filter *filter,
- uint16_t *rx_queue);
-/**< @internal Get a flex filter rule on an Ethernet device */
-
typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
enum rte_filter_type filter_type,
enum rte_filter_op filter_op,
priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control.*/
eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address */
eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address */
+ eth_mac_addr_set_t mac_addr_set; /**< Set a MAC address */
eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array */
eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap */
eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule.*/
rss_hash_update_t rss_hash_update;
/** Get current RSS hash configuration. */
rss_hash_conf_get_t rss_hash_conf_get;
- eth_add_syn_filter_t add_syn_filter; /**< add syn filter. */
- eth_remove_syn_filter_t remove_syn_filter; /**< remove syn filter. */
- eth_get_syn_filter_t get_syn_filter; /**< get syn filter. */
- eth_add_ethertype_filter_t add_ethertype_filter; /**< add ethertype filter. */
- eth_remove_ethertype_filter_t remove_ethertype_filter; /**< remove ethertype filter. */
- eth_get_ethertype_filter_t get_ethertype_filter; /**< get ethertype filter. */
- eth_add_2tuple_filter_t add_2tuple_filter; /**< add 2tuple filter. */
- eth_remove_2tuple_filter_t remove_2tuple_filter; /**< remove 2tuple filter. */
- eth_get_2tuple_filter_t get_2tuple_filter; /**< get 2tuple filter. */
- eth_add_5tuple_filter_t add_5tuple_filter; /**< add 5tuple filter. */
- eth_remove_5tuple_filter_t remove_5tuple_filter; /**< remove 5tuple filter. */
- eth_get_5tuple_filter_t get_5tuple_filter; /**< get 5tuple filter. */
- eth_add_flex_filter_t add_flex_filter; /**< add flex filter. */
- eth_remove_flex_filter_t remove_flex_filter; /**< remove flex filter. */
- eth_get_flex_filter_t get_flex_filter; /**< get flex filter. */
eth_filter_ctrl_t filter_ctrl; /**< common filter control*/
};
+/**
+ * Function type used for callbacks for processing packets on RX and TX
+ *
+ * If configured for RX, it is called with a burst of packets that have just
+ * been received on the given port and queue. On TX, it is called with a burst
+ * of packets immediately before those packets are put onto the hardware queue
+ * for transmission.
+ *
+ * @param port
+ * The ethernet port on which rx or tx is being performed
+ * @param queue
+ * The queue on the ethernet port which is being used to receive or transmit
+ * the packets.
+ * @param pkts
+ * The burst of packets on which processing is to be done. On RX, these
+ * packets have just been received. On TX, they are about to be transmitted.
+ * @param nb_pkts
+ * The number of packets in the burst pointed to by "pkts"
+ * @param user_param
+ * The arbitrary user parameter passed in by the application when the callback
+ * was originally configured.
+ * @return
+ * The number of packets remaining in pkts are processing.
+ * * On RX, this will be returned to the user as the return value from
+ * rte_eth_rx_burst.
+ * * On TX, this will be the number of packets actually written to the NIC.
+ */
+typedef uint16_t (*rte_rxtx_callback_fn)(uint8_t port, uint16_t queue,
+ struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param);
+
+/**
+ * @internal
+ * Structure used to hold information about the callbacks to be called for a
+ * queue on RX and TX.
+ */
+struct rte_eth_rxtx_callback {
+ struct rte_eth_rxtx_callback *next;
+ rte_rxtx_callback_fn fn;
+ void *param;
+};
+
/**
* @internal
* The generic data structure associated with each ethernet device.
const struct eth_driver *driver;/**< Driver for this device */
struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */
- struct rte_eth_dev_cb_list callbacks; /**< User application callbacks */
+ /** User application callbacks for NIC interrupts */
+ struct rte_eth_dev_cb_list link_intr_cbs;
+ /**
+ * User-supplied functions called from rx_burst to post-process
+ * received packets before passing them to the user
+ */
+ struct rte_eth_rxtx_callback **post_rx_burst_cbs;
+ /**
+ * User-supplied functions called from tx_burst to pre-process
+ * received packets before passing them to the driver for transmission.
+ */
+ struct rte_eth_rxtx_callback **pre_tx_burst_cbs;
+ uint8_t attached; /**< Flag indicating the port is attached */
};
struct rte_eth_dev_sriov {
* Get the total number of Ethernet devices that have been successfully
* initialized by the [matching] Ethernet driver during the PCI probing phase.
* All devices whose port identifier is in the range
- * [0, rte_eth_dev_count() - 1] can be operated on by network applications.
+ * [0, rte_eth_dev_count() - 1] can be operated on by network applications
+ * immediately after invoking rte_eal_init().
+ * If the application unplugs a port using hotplug function, The enabled port
+ * numbers may be noncontiguous. In the case, the applications need to manage
+ * enabled port by themselves.
*
* @return
* - The total number of usable Ethernet devices.
*/
struct rte_eth_dev *rte_eth_dev_allocate(const char *name);
+/**
+ * Function for internal use by dummy drivers primarily, e.g. ring-based
+ * driver.
+ * Release the specified ethdev port.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure.
+ * @return
+ * - 0 on success, negative on error
+ */
+int rte_eth_dev_release_port(struct rte_eth_dev *eth_dev);
+
struct eth_driver;
/**
* @internal
*
* - *dev_private*: Holds a pointer to the device private data structure.
*
- * - *max_frame_size*: Contains the default Ethernet maximum frame length
- * (1518).
+ * - *mtu*: Contains the default Ethernet maximum frame length (1500).
*
* - *port_id*: Contains the port index of the device (actually the index
* of the *eth_dev* structure in the *rte_eth_devices* array).
typedef int (*eth_dev_init_t)(struct eth_driver *eth_drv,
struct rte_eth_dev *eth_dev);
+/**
+ * @internal
+ * Finalization function of an Ethernet driver invoked for each matching
+ * Ethernet PCI device detected during the PCI closing phase.
+ *
+ * @param eth_drv
+ * The pointer to the [matching] Ethernet driver structure supplied by
+ * the PMD when it registered itself.
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure
+ * associated with the matching device and which have been [automatically]
+ * allocated in the *rte_eth_devices* array.
+ * @return
+ * - 0: Success, the device is properly finalized by the driver.
+ * In particular, the driver MUST free the *dev_ops* pointer
+ * of the *eth_dev* structure.
+ * - <0: Error code of the device initialization failure.
+ */
+typedef int (*eth_dev_uninit_t)(const struct eth_driver *eth_drv,
+ struct rte_eth_dev *eth_dev);
+
/**
* @internal
* The structure associated with a PMD Ethernet driver.
*
* - The *eth_dev_init* function invoked for each matching PCI device.
*
+ * - The *eth_dev_uninit* function invoked for each matching PCI device.
+ *
* - The size of the private data to allocate for each matching device.
*/
struct eth_driver {
struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */
eth_dev_init_t eth_dev_init; /**< Device init function. */
+ eth_dev_uninit_t eth_dev_uninit; /**< Device uninit function. */
unsigned int dev_private_size; /**< Size of device private data. */
};
* - *obytes* with the total of successfully transmitted bytes.
* - *ierrors* with the total of erroneous received packets.
* - *oerrors* with the total of failed transmitted packets.
+ * @return
+ * Zero if successful. Non-zero otherwise.
*/
-extern void rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats);
+extern int rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats);
/**
* Reset the general I/O statistics of an Ethernet device.
struct rte_eth_dev *dev;
dev = &rte_eth_devices[port_id];
- return (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id], rx_pkts, nb_pkts);
+
+ nb_pkts = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id], rx_pkts,
+ nb_pkts);
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+ struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id];
+
+ if (unlikely(cb != NULL)) {
+ do {
+ nb_pkts = cb->fn(port_id, queue_id, rx_pkts, nb_pkts,
+ cb->param);
+ cb = cb->next;
+ } while (cb != NULL);
+ }
+#endif
+
+ return nb_pkts;
}
#endif
struct rte_eth_dev *dev;
dev = &rte_eth_devices[port_id];
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+ struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id];
+
+ if (unlikely(cb != NULL)) {
+ do {
+ nb_pkts = cb->fn(port_id, queue_id, tx_pkts, nb_pkts,
+ cb->param);
+ cb = cb->next;
+ } while (cb != NULL);
+ }
+#endif
+
return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
}
#endif
* @param port
* The port identifier of the Ethernet device.
* @param reta_conf
- * RETA to update.
+ * RETA to update.
+ * @param reta_size
+ * Redirection table size. The table size can be queried by
+ * rte_eth_dev_info_get().
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
int rte_eth_dev_rss_reta_update(uint8_t port,
- struct rte_eth_rss_reta *reta_conf);
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size);
/**
* Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
* The port identifier of the Ethernet device.
* @param reta_conf
* RETA to query.
+ * @param reta_size
+ * Redirection table size. The table size can be queried by
+ * rte_eth_dev_info_get().
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
int rte_eth_dev_rss_reta_query(uint8_t port,
- struct rte_eth_rss_reta *reta_conf);
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size);
/**
* Updates unicast hash table for receiving packet with the given destination
/**
* Configuration of Receive Side Scaling hash computation of Ethernet device.
*
- * @param port
+ * @param port_id
* The port identifier of the Ethernet device.
* @param rss_conf
* The new configuration to use for RSS hash computation on the port.
* Retrieve current configuration of Receive Side Scaling hash computation
* of Ethernet device.
*
- * @param port
+ * @param port_id
* The port identifier of the Ethernet device.
* @param rss_conf
* Where to store the current RSS hash configuration of the Ethernet device.
struct rte_eth_udp_tunnel *tunnel_udp);
/**
- * add syn filter
+ * Check whether the filter type is supported on an Ethernet device.
+ * All the supported filter types are defined in 'rte_eth_ctrl.h'.
*
* @param port_id
* The port identifier of the Ethernet device.
- * @param rx_queue
- * The index of RX queue where to store RX packets matching the syn filter.
- * @param filter
- * The pointer to the structure describing the syn filter rule.
+ * @param filter_type
+ * Filter type.
* @return
* - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
+ * - (-ENOTSUP) if hardware doesn't support this filter type.
+ * - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_add_syn_filter(uint8_t port_id,
- struct rte_syn_filter *filter, uint16_t rx_queue);
+int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type);
/**
- * remove syn filter
+ * Take operations to assigned filter type on an Ethernet device.
+ * All the supported operations and filter types are defined in 'rte_eth_ctrl.h'.
*
* @param port_id
* The port identifier of the Ethernet device.
+ * @param filter_type
+ * Filter type.
+ * @param filter_op
+ * Type of operation.
+ * @param arg
+ * A pointer to arguments defined specifically for the operation.
* @return
* - (0) if successful.
* - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - others depends on the specific operations implementation.
*/
-int rte_eth_dev_remove_syn_filter(uint8_t port_id);
+int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op, void *arg);
/**
- * get syn filter
+ * Add a callback to be called on packet RX on a given port and queue.
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param filter
- * The pointer to the structure describing the syn filter.
- * @param rx_queue
- * A pointer to get the queue index of syn filter.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_get_syn_filter(uint8_t port_id,
- struct rte_syn_filter *filter, uint16_t *rx_queue);
-
-/**
- * Add a new ethertype filter rule on an Ethernet device.
+ * This API configures a function to be called for each burst of
+ * packets received on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_rx_callback().
*
* @param port_id
* The port identifier of the Ethernet device.
- * @param index
- * The identifier of ethertype filter.
- * @param filter
- * The pointer to the structure describing the ethertype filter rule.
- * The *rte_ethertype_filter* structure includes the values of the different
- * fields to match: ethertype and priority in vlan tag.
- * priority in vlan tag is not supported for E1000 dev.
- * @param rx_queue
- * The index of the RX queue where to store RX packets matching the added
- * ethertype filter.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support ethertype filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- */
-int rte_eth_dev_add_ethertype_filter(uint8_t port_id, uint16_t index,
- struct rte_ethertype_filter *filter, uint16_t rx_queue);
-
-/**
- * remove an ethertype filter rule on an Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ * The callback function
+ * @param user_param
+ * A generic pointer parameter which will be passed to each invocation of the
+ * callback function on this port and queue.
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of ethertype filter.
* @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support ethertype filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
+ * NULL on error.
+ * On success, a pointer value which can later be used to remove the callback.
*/
-int rte_eth_dev_remove_ethertype_filter(uint8_t port_id,
- uint16_t index);
+void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
+ rte_rxtx_callback_fn fn, void *user_param);
/**
- * Get an ethertype filter rule on an Ethernet device.
+ * Add a callback to be called on packet TX on a given port and queue.
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of ethertype filter.
- * @param filter
- * A pointer to a structure of type *rte_ethertype_filter* to be filled with
- * the information of the Ethertype filter.
- * @param rx_queue
- * A pointer to get the queue index.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support ethertype filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- * - (-ENOENT) if no enabled filter in this index.
- */
-int rte_eth_dev_get_ethertype_filter(uint8_t port_id, uint16_t index,
- struct rte_ethertype_filter *filter, uint16_t *rx_queue);
-
-/**
- * Add a new 2tuple filter rule on an Ethernet device.
+ * This API configures a function to be called for each burst of
+ * packets sent on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_tx_callback().
*
* @param port_id
* The port identifier of the Ethernet device.
- * @param index
- * The identifier of 2tuple filter.
- * @param filter
- * The pointer to the structure describing the 2tuple filter rule.
- * The *rte_2tuple_filter* structure includes the values of the different
- * fields to match: protocol, dst_port and
- * tcp_flags if the protocol is tcp type.
- * @param rx_queue
- * The index of the RX queue where to store RX packets matching the added
- * 2tuple filter.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- */
-int rte_eth_dev_add_2tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_2tuple_filter *filter, uint16_t rx_queue);
-
-/**
- * remove a 2tuple filter rule on an Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ * The callback function
+ * @param user_param
+ * A generic pointer parameter which will be passed to each invocation of the
+ * callback function on this port and queue.
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 2tuple filter.
* @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
+ * NULL on error.
+ * On success, a pointer value which can later be used to remove the callback.
*/
-int rte_eth_dev_remove_2tuple_filter(uint8_t port_id, uint16_t index);
+void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
+ rte_rxtx_callback_fn fn, void *user_param);
/**
- * Get an 2tuple filter rule on an Ethernet device.
+ * Remove an RX packet callback from a given port and queue.
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 2tuple filter.
- * @param filter
- * A pointer to a structure of type *rte_2tuple_filter* to be filled with
- * the information of the 2tuple filter.
- * @param rx_queue
- * A pointer to get the queue index.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- * - (-ENOENT) if no enabled filter in this index.
- */
-int rte_eth_dev_get_2tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_2tuple_filter *filter, uint16_t *rx_queue);
-
-/**
- * Add a new 5tuple filter rule on an Ethernet device.
+ * This function is used to removed callbacks that were added to a NIC port
+ * queue using rte_eth_add_rx_callback().
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 5tuple filter.
- * @param filter
- * The pointer to the structure describing the 5tuple filter rule.
- * The *rte_5tuple_filter* structure includes the values of the different
- * fields to match: dst src IP, dst src port, protocol and relative masks
- * @param rx_queue
- * The index of the RX queue where to store RX packets matching the added
- * 5tuple filter.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- */
-int rte_eth_dev_add_5tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_5tuple_filter *filter, uint16_t rx_queue);
-
-/**
- * remove a 5tuple filter rule on an Ethernet device.
+ * Note: the callback is removed from the callback list but it isn't freed
+ * since the it may still be in use. The memory for the callback can be
+ * subsequently freed back by the application by calling rte_free():
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 5tuple filter.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- */
-int rte_eth_dev_remove_5tuple_filter(uint8_t port_id, uint16_t index);
-
-/**
- * Get an 5tuple filter rule on an Ethernet device.
+ * - Immediately - if the port is stopped, or the user knows that no
+ * callbacks are in flight e.g. if called from the thread doing RX/TX
+ * on that queue.
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 5tuple filter.
- * @param filter
- * A pointer to a structure of type *rte_5tuple_filter* to be filled with
- * the information of the 5tuple filter.
- * @param rx_queue
- * A pointer to get the queue index.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- */
-int rte_eth_dev_get_5tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_5tuple_filter *filter, uint16_t *rx_queue);
-
-/**
- * Add a new flex filter rule on an Ethernet device.
+ * - After a short delay - where the delay is sufficient to allow any
+ * in-flight callbacks to complete.
*
* @param port_id
* The port identifier of the Ethernet device.
- * @param index
- * The identifier of flex filter.
- * @param filter
- * The pointer to the structure describing the flex filter rule.
- * The *rte_flex_filter* structure includes the values of the different fields
- * to match: the dwords (first len bytes of packet ) and relative masks.
- * @param rx_queue
- * The index of the RX queue where to store RX packets matching the added
- * flex filter.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support flex filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- * - (-ENOENT) if no enabled filter in this index.
- */
-int rte_eth_dev_add_flex_filter(uint8_t port_id, uint16_t index,
- struct rte_flex_filter *filter, uint16_t rx_queue);
-
-/**
- * remove a flex filter rule on an Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device from which the callback is to be removed.
+ * @param user_cb
+ * User supplied callback created via rte_eth_add_rx_callback().
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of flex filter.
* @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support flex filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
+ * - 0: Success. Callback was removed.
+ * - -ENOTSUP: Callback support is not available.
+ * - -EINVAL: The port_id or the queue_id is out of range, or the callback
+ * is NULL or not found for the port/queue.
*/
-int rte_eth_dev_remove_flex_filter(uint8_t port_id, uint16_t index);
+int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
+ struct rte_eth_rxtx_callback *user_cb);
/**
- * Get an flex filter rule on an Ethernet device.
+ * Remove a TX packet callback from a given port and queue.
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of flex filter.
- * @param filter
- * A pointer to a structure of type *rte_flex_filter* to be filled with
- * the information of the flex filter.
- * @param rx_queue
- * A pointer to get the queue index.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support flex filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- * - (-ENOENT) if no enabled filter in this index.
- */
-int rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
- struct rte_flex_filter *filter, uint16_t *rx_queue);
-
-/**
- * Check whether the filter type is supported on an Ethernet device.
- * All the supported filter types are defined in 'rte_eth_ctrl.h'.
+ * This function is used to removed callbacks that were added to a NIC port
+ * queue using rte_eth_add_tx_callback().
*
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param filter_type
- * Filter type.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support this filter type.
- * - (-ENODEV) if *port_id* invalid.
- */
-int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type);
-
-/**
- * Take operations to assigned filter type on an Ethernet device.
- * All the supported operations and filter types are defined in 'rte_eth_ctrl.h'.
+ * Note: the callback is removed from the callback list but it isn't freed
+ * since the it may still be in use. The memory for the callback can be
+ * subsequently freed back by the application by calling rte_free():
+ *
+ * - Immediately - if the port is stopped, or the user knows that no
+ * callbacks are in flight e.g. if called from the thread doing RX/TX
+ * on that queue.
+ *
+ * - After a short delay - where the delay is sufficient to allow any
+ * in-flight callbacks to complete.
*
* @param port_id
* The port identifier of the Ethernet device.
- * @param filter_type
- * Filter type.
- * @param filter_op
- * Type of operation.
- * @param arg
- * A pointer to arguments defined specifically for the operation.
+ * @param queue_id
+ * The queue on the Ethernet device from which the callback is to be removed.
+ * @param user_cb
+ * User supplied callback created via rte_eth_add_tx_callback().
+ *
* @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support.
- * - (-ENODEV) if *port_id* invalid.
- * - others depends on the specific operations implementation.
+ * - 0: Success. Callback was removed.
+ * - -ENOTSUP: Callback support is not available.
+ * - -EINVAL: The port_id or the queue_id is out of range, or the callback
+ * is NULL or not found for the port/queue.
*/
-int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
- enum rte_filter_op filter_op, void *arg);
+int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
+ struct rte_eth_rxtx_callback *user_cb);
#ifdef __cplusplus
}
git.droids-corp.org / dpdk.git / blobdiff