*
* @see rte_event_schedule(), rte_event_dequeue_burst()
*/
+#define RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES (1ULL << 3)
+/**< Event device is capable of enqueuing events of any type to any queue.
+ * If this capability is not set, the queue only supports events of the
+ * *RTE_EVENT_QUEUE_CFG_* type that it was created with.
+ *
+ * @see RTE_EVENT_QUEUE_CFG_* values
+ */
/* Event device priority levels */
#define RTE_EVENT_DEV_PRIORITY_HIGHEST 0
*/
struct rte_event_dev_info {
const char *driver_name; /**< Event driver name */
- struct rte_pci_device *pci_dev; /**< PCI information */
+ struct rte_device *dev; /**< Device information */
uint32_t min_dequeue_timeout_ns;
/**< Minimum supported global dequeue timeout(ns) by this device */
uint32_t max_dequeue_timeout_ns;
* This value cannot exceed the *max_event_queue_flows* which previously
* provided in rte_event_dev_info_get()
*/
- uint8_t nb_event_port_dequeue_depth;
+ uint32_t nb_event_port_dequeue_depth;
/**< Maximum number of events can be dequeued at a time from an
* event port by this device.
* This value cannot exceed the *max_event_port_dequeue_depth*
/* Event queue specific APIs */
/* Event queue configuration bitmap flags */
-#define RTE_EVENT_QUEUE_CFG_DEFAULT (0)
-/**< Default value of *event_queue_cfg* when rte_event_queue_setup() invoked
- * with queue_conf == NULL
- *
- * @see rte_event_queue_setup()
- */
#define RTE_EVENT_QUEUE_CFG_TYPE_MASK (3ULL << 0)
/**< Mask for event queue schedule type configuration request */
#define RTE_EVENT_QUEUE_CFG_ALL_TYPES (0ULL << 0)
* which was previously supplied to rte_event_dev_configure().
* This should be set to '-1' for *open system*.
*/
- uint8_t dequeue_depth;
+ uint16_t dequeue_depth;
/**< Configure number of bulk dequeues for this event port.
* This value cannot exceed the *nb_event_port_dequeue_depth*
* which previously supplied to rte_event_dev_configure()
*/
- uint8_t enqueue_depth;
+ uint16_t enqueue_depth;
/**< Configure number of bulk enqueues for this event port.
* This value cannot exceed the *nb_event_port_enqueue_depth*
* which previously supplied to rte_event_dev_configure()
/**< Pointer to device data */
const struct rte_eventdev_ops *dev_ops;
/**< Functions exported by PMD */
- struct rte_pci_device *pci_dev;
- /**< PCI info. supplied by probing */
+ struct rte_device *dev;
+ /**< Device info. supplied by probing */
const struct rte_eventdev_driver *driver;
/**< Driver for this device */
*
* @return
* - 0 on success.
- * - <0 on failure.
+ * - -ENOTSUP if the device doesn't support timeouts
+ * - -EINVAL if *dev_id* is invalid or *timeout_ticks* is NULL
+ * - other values < 0 on failure.
*
* @see rte_event_dequeue_burst(), RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
* @see rte_event_dev_configure()
int
rte_event_dev_dump(uint8_t dev_id, FILE *f);
+/** Maximum name length for extended statistics counters */
+#define RTE_EVENT_DEV_XSTATS_NAME_SIZE 64
+
+/**
+ * Selects the component of the eventdev to retrieve statistics from.
+ */
+enum rte_event_dev_xstats_mode {
+ RTE_EVENT_DEV_XSTATS_DEVICE,
+ RTE_EVENT_DEV_XSTATS_PORT,
+ RTE_EVENT_DEV_XSTATS_QUEUE,
+};
+
+/**
+ * A name-key lookup element for extended statistics.
+ *
+ * This structure is used to map between names and ID numbers
+ * for extended ethdev statistics.
+ */
+struct rte_event_dev_xstats_name {
+ char name[RTE_EVENT_DEV_XSTATS_NAME_SIZE];
+};
+
+/**
+ * Retrieve names of extended statistics of an event device.
+ *
+ * @param dev_id
+ * The identifier of the event device.
+ * @param mode
+ * The mode of statistics to retrieve. Choices include the device statistics,
+ * port statistics or queue statistics.
+ * @param queue_port_id
+ * Used to specify the port or queue number in queue or port mode, and is
+ * ignored in device mode.
+ * @param[out] xstats_names
+ * Block of memory to insert names into. Must be at least size in capacity.
+ * If set to NULL, function returns required capacity.
+ * @param[out] ids
+ * Block of memory to insert ids into. Must be at least size in capacity.
+ * If set to NULL, function returns required capacity. The id values returned
+ * can be passed to *rte_event_dev_xstats_get* to select statistics.
+ * @param size
+ * Capacity of xstats_names (number of names).
+ * @return
+ * - positive value lower or equal to size: success. The return value
+ * is the number of entries filled in the stats table.
+ * - positive value higher than size: error, the given statistics table
+ * is too small. The return value corresponds to the size that should
+ * be given to succeed. The entries in the table are not valid and
+ * shall not be used by the caller.
+ * - negative value on error:
+ * -ENODEV for invalid *dev_id*
+ * -EINVAL for invalid mode, queue port or id parameters
+ * -ENOTSUP if the device doesn't support this function.
+ */
+int
+rte_event_dev_xstats_names_get(uint8_t dev_id,
+ enum rte_event_dev_xstats_mode mode,
+ uint8_t queue_port_id,
+ struct rte_event_dev_xstats_name *xstats_names,
+ unsigned int *ids,
+ unsigned int size);
+
+/**
+ * Retrieve extended statistics of an event device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param mode
+ * The mode of statistics to retrieve. Choices include the device statistics,
+ * port statistics or queue statistics.
+ * @param queue_port_id
+ * Used to specify the port or queue number in queue or port mode, and is
+ * ignored in device mode.
+ * @param ids
+ * The id numbers of the stats to get. The ids can be got from the stat
+ * position in the stat list from rte_event_dev_get_xstats_names(), or
+ * by using rte_eventdev_get_xstats_by_name()
+ * @param[out] values
+ * The values for each stats request by ID.
+ * @param n
+ * The number of stats requested
+ * @return
+ * - positive value: number of stat entries filled into the values array
+ * - negative value on error:
+ * -ENODEV for invalid *dev_id*
+ * -EINVAL for invalid mode, queue port or id parameters
+ * -ENOTSUP if the device doesn't support this function.
+ */
+int
+rte_event_dev_xstats_get(uint8_t dev_id,
+ enum rte_event_dev_xstats_mode mode,
+ uint8_t queue_port_id,
+ const unsigned int ids[],
+ uint64_t values[], unsigned int n);
+
+/**
+ * Retrieve the value of a single stat by requesting it by name.
+ *
+ * @param dev_id
+ * The identifier of the device
+ * @param name
+ * The stat name to retrieve
+ * @param[out] id
+ * If non-NULL, the numerical id of the stat will be returned, so that further
+ * requests for the stat can be got using rte_eventdev_xstats_get, which will
+ * be faster as it doesn't need to scan a list of names for the stat.
+ * If the stat cannot be found, the id returned will be (unsigned)-1.
+ * @return
+ * - positive value or zero: the stat value
+ * - negative value: -EINVAL if stat not found, -ENOTSUP if not supported.
+ */
+uint64_t
+rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
+ unsigned int *id);
+
+/**
+ * Reset the values of the xstats of the selected component in the device.
+ *
+ * @param dev_id
+ * The identifier of the device
+ * @param mode
+ * The mode of the statistics to reset. Choose from device, queue or port.
+ * @param queue_port_id
+ * The queue or port to reset. 0 and positive values select ports and queues,
+ * while -1 indicates all ports or queues.
+ * @param ids
+ * Selects specific statistics to be reset. When NULL, all statistics selected
+ * by *mode* will be reset. If non-NULL, must point to array of at least
+ * *nb_ids* size.
+ * @param nb_ids
+ * The number of ids available from the *ids* array. Ignored when ids is NULL.
+ * @return
+ * - zero: successfully reset the statistics to zero
+ * - negative value: -EINVAL invalid parameters, -ENOTSUP if not supported.
+ */
+int
+rte_event_dev_xstats_reset(uint8_t dev_id,
+ enum rte_event_dev_xstats_mode mode,
+ int16_t queue_port_id,
+ const uint32_t ids[],
+ uint32_t nb_ids);
+
#ifdef __cplusplus
}
#endif