* BSD LICENSE
*
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2016 6WIND S.A.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
} __rte_cache_aligned;
#endif
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
/**
* A structure that stores a per-core object cache.
*/
*/
void *objs[RTE_MEMPOOL_CACHE_MAX_SIZE * 3]; /**< Cache objects */
} __rte_cache_aligned;
-#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
/**
* A structure that stores the size of mempool elements.
/* "MP_<name>" */
#define RTE_MEMPOOL_MZ_FORMAT RTE_MEMPOOL_MZ_PREFIX "%s"
-#ifdef RTE_LIBRTE_XEN_DOM0
-
-/* "<name>_MP_elt" */
-#define RTE_MEMPOOL_OBJ_NAME "%s_" RTE_MEMPOOL_MZ_PREFIX "elt"
-
-#else
-
-#define RTE_MEMPOOL_OBJ_NAME RTE_MEMPOOL_MZ_FORMAT
-
-#endif /* RTE_LIBRTE_XEN_DOM0 */
-
#define MEMPOOL_PG_SHIFT_MAX (sizeof(uintptr_t) * CHAR_BIT - 1)
/** Mempool over one chunk of physically continuous memory */
* Mempool object header structure
*
* Each object stored in mempools are prefixed by this header structure,
- * it allows to retrieve the mempool pointer from the object. When debug
- * is enabled, a cookie is also added in this structure preventing
- * corruptions and double-frees.
+ * it allows to retrieve the mempool pointer from the object and to
+ * iterate on all objects attached to a mempool. When debug is enabled,
+ * a cookie is also added in this structure preventing corruptions and
+ * double-frees.
*/
struct rte_mempool_objhdr {
+ STAILQ_ENTRY(rte_mempool_objhdr) next; /**< Next in list. */
struct rte_mempool *mp; /**< The mempool owning the object. */
+ phys_addr_t physaddr; /**< Physical address of the object. */
#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
uint64_t cookie; /**< Debug cookie. */
#endif
};
+/**
+ * A list of object headers type
+ */
+STAILQ_HEAD(rte_mempool_objhdr_list, rte_mempool_objhdr);
+
/**
* Mempool object trailer structure
*
#endif
};
+/**
+ * A list of memory where objects are stored
+ */
+STAILQ_HEAD(rte_mempool_memhdr_list, rte_mempool_memhdr);
+
+/**
+ * Callback used to free a memory chunk
+ */
+typedef void (rte_mempool_memchunk_free_cb_t)(struct rte_mempool_memhdr *memhdr,
+ void *opaque);
+
+/**
+ * Mempool objects memory header structure
+ *
+ * The memory chunks where objects are stored. Each chunk is virtually
+ * and physically contiguous.
+ */
+struct rte_mempool_memhdr {
+ STAILQ_ENTRY(rte_mempool_memhdr) next; /**< Next in list. */
+ struct rte_mempool *mp; /**< The mempool owning the chunk */
+ void *addr; /**< Virtual address of the chunk */
+ phys_addr_t phys_addr; /**< Physical address of the chunk */
+ size_t len; /**< length of the chunk */
+ rte_mempool_memchunk_free_cb_t *free_cb; /**< Free callback */
+ void *opaque; /**< Argument passed to the free callback */
+};
+
/**
* The RTE mempool structure.
*/
struct rte_ring *ring; /**< Ring to store objects. */
phys_addr_t phys_addr; /**< Phys. addr. of mempool struct. */
int flags; /**< Flags of the mempool. */
- uint32_t size; /**< Size of the mempool. */
+ int socket_id; /**< Socket id passed at mempool creation. */
+ uint32_t size; /**< Max size of the mempool. */
uint32_t cache_size; /**< Size of per-lcore local cache. */
uint32_t cache_flushthresh;
/**< Threshold before we flush excess elements. */
unsigned private_data_size; /**< Size of private data. */
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
- /** Per-lcore local cache. */
- struct rte_mempool_cache local_cache[RTE_MAX_LCORE];
-#endif
+ struct rte_mempool_cache *local_cache; /**< Per-lcore local cache */
+
+ uint32_t populated_size; /**< Number of populated objects. */
+ struct rte_mempool_objhdr_list elt_list; /**< List of objects in pool */
+ uint32_t nb_mem_chunks; /**< Number of memory chunks */
+ struct rte_mempool_memhdr_list mem_list; /**< List of memory chunks */
#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
/** Per-lcore statistics. */
struct rte_mempool_debug_stats stats[RTE_MAX_LCORE];
#endif
-
- /* Address translation support, starts from next cache line. */
-
- /** Number of elements in the elt_pa array. */
- uint32_t pg_num __rte_cache_aligned;
- uint32_t pg_shift; /**< LOG2 of the physical pages. */
- uintptr_t pg_mask; /**< physical page mask value. */
- uintptr_t elt_va_start;
- /**< Virtual address of the first mempool object. */
- uintptr_t elt_va_end;
- /**< Virtual address of the <size + 1> mempool object. */
- phys_addr_t elt_pa[MEMPOOL_PG_NUM_DEFAULT];
- /**< Array of physical page addresses for the mempool objects buffer. */
-
} __rte_cache_aligned;
-#define MEMPOOL_F_NO_SPREAD 0x0001 /**< Do not spread in memory. */
+#define MEMPOOL_F_NO_SPREAD 0x0001 /**< Do not spread among memory channels. */
#define MEMPOOL_F_NO_CACHE_ALIGN 0x0002 /**< Do not align objs on cache lines.*/
#define MEMPOOL_F_SP_PUT 0x0004 /**< Default put is "single-producer".*/
#define MEMPOOL_F_SC_GET 0x0008 /**< Default get is "single-consumer".*/
*
* @param mp
* Pointer to the memory pool.
- * @param pgn
- * Number of pages used to store mempool objects.
+ * @param cs
+ * Size of the per-lcore cache.
*/
-#define MEMPOOL_HEADER_SIZE(mp, pgn) (sizeof(*(mp)) + \
- RTE_ALIGN_CEIL(((pgn) - RTE_DIM((mp)->elt_pa)) * \
- sizeof ((mp)->elt_pa[0]), RTE_CACHE_LINE_SIZE))
-
-/**
- * Return true if the whole mempool is in contiguous memory.
- */
-#define MEMPOOL_IS_CONTIG(mp) \
- ((mp)->pg_num == MEMPOOL_PG_NUM_DEFAULT && \
- (mp)->phys_addr == (mp)->elt_pa[0])
+#define MEMPOOL_HEADER_SIZE(mp, cs) \
+ (sizeof(*(mp)) + (((cs) == 0) ? 0 : \
+ (sizeof(struct rte_mempool_cache) * RTE_MAX_LCORE)))
/* return the header of a mempool object (internal) */
static inline struct rte_mempool_objhdr *__mempool_get_header(void *obj)
{
- return (struct rte_mempool_objhdr *)RTE_PTR_SUB(obj, sizeof(struct rte_mempool_objhdr));
+ return (struct rte_mempool_objhdr *)RTE_PTR_SUB(obj,
+ sizeof(struct rte_mempool_objhdr));
}
/**
* - 1: object is supposed to be free, mark it as allocated
* - 2: just check that cookie is valid (free or allocated)
*/
+void rte_mempool_check_cookies(const struct rte_mempool *mp,
+ void * const *obj_table_const, unsigned n, int free);
+
#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-#ifndef __INTEL_COMPILER
-#pragma GCC diagnostic ignored "-Wcast-qual"
-#endif
-static inline void __mempool_check_cookies(const struct rte_mempool *mp,
- void * const *obj_table_const,
- unsigned n, int free)
-{
- struct rte_mempool_objhdr *hdr;
- struct rte_mempool_objtlr *tlr;
- uint64_t cookie;
- void *tmp;
- void *obj;
- void **obj_table;
-
- /* Force to drop the "const" attribute. This is done only when
- * DEBUG is enabled */
- tmp = (void *) obj_table_const;
- obj_table = (void **) tmp;
-
- while (n--) {
- obj = obj_table[n];
-
- if (rte_mempool_from_obj(obj) != mp)
- rte_panic("MEMPOOL: object is owned by another "
- "mempool\n");
-
- hdr = __mempool_get_header(obj);
- cookie = hdr->cookie;
-
- if (free == 0) {
- if (cookie != RTE_MEMPOOL_HEADER_COOKIE1) {
- rte_log_set_history(0);
- RTE_LOG(CRIT, MEMPOOL,
- "obj=%p, mempool=%p, cookie=%" PRIx64 "\n",
- obj, (const void *) mp, cookie);
- rte_panic("MEMPOOL: bad header cookie (put)\n");
- }
- hdr->cookie = RTE_MEMPOOL_HEADER_COOKIE2;
- }
- else if (free == 1) {
- if (cookie != RTE_MEMPOOL_HEADER_COOKIE2) {
- rte_log_set_history(0);
- RTE_LOG(CRIT, MEMPOOL,
- "obj=%p, mempool=%p, cookie=%" PRIx64 "\n",
- obj, (const void *) mp, cookie);
- rte_panic("MEMPOOL: bad header cookie (get)\n");
- }
- hdr->cookie = RTE_MEMPOOL_HEADER_COOKIE1;
- }
- else if (free == 2) {
- if (cookie != RTE_MEMPOOL_HEADER_COOKIE1 &&
- cookie != RTE_MEMPOOL_HEADER_COOKIE2) {
- rte_log_set_history(0);
- RTE_LOG(CRIT, MEMPOOL,
- "obj=%p, mempool=%p, cookie=%" PRIx64 "\n",
- obj, (const void *) mp, cookie);
- rte_panic("MEMPOOL: bad header cookie (audit)\n");
- }
- }
- tlr = __mempool_get_trailer(obj);
- cookie = tlr->cookie;
- if (cookie != RTE_MEMPOOL_TRAILER_COOKIE) {
- rte_log_set_history(0);
- RTE_LOG(CRIT, MEMPOOL,
- "obj=%p, mempool=%p, cookie=%" PRIx64 "\n",
- obj, (const void *) mp, cookie);
- rte_panic("MEMPOOL: bad trailer cookie\n");
- }
- }
-}
-#ifndef __INTEL_COMPILER
-#pragma GCC diagnostic error "-Wcast-qual"
-#endif
+#define __mempool_check_cookies(mp, obj_table_const, n, free) \
+ rte_mempool_check_cookies(mp, obj_table_const, n, free)
#else
#define __mempool_check_cookies(mp, obj_table_const, n, free) do {} while(0)
#endif /* RTE_LIBRTE_MEMPOOL_DEBUG */
/**
- * A mempool object iterator callback function.
- */
-typedef void (*rte_mempool_obj_iter_t)(void * /*obj_iter_arg*/,
- void * /*obj_start*/,
- void * /*obj_end*/,
- uint32_t /*obj_index */);
-
-/**
- * Call a function for each mempool object in a memory chunk
- *
- * Iterate across objects of the given size and alignment in the
- * provided chunk of memory. The given memory buffer can consist of
- * disjointed physical pages.
+ * An object callback function for mempool.
*
- * For each object, call the provided callback (if any). This function
- * is used to populate a mempool, or walk through all the elements of a
- * mempool, or estimate how many elements of the given size could be
- * created in the given memory buffer.
- *
- * @param vaddr
- * Virtual address of the memory buffer.
- * @param elt_num
- * Maximum number of objects to iterate through.
- * @param elt_sz
- * Size of each object.
- * @param align
- * Alignment of each object.
- * @param paddr
- * Array of physical addresses of the pages that comprises given memory
- * buffer.
- * @param pg_num
- * Number of elements in the paddr array.
- * @param pg_shift
- * LOG2 of the physical pages size.
- * @param obj_iter
- * Object iterator callback function (could be NULL).
- * @param obj_iter_arg
- * User defined parameter for the object iterator callback function.
- *
- * @return
- * Number of objects iterated through.
+ * Used by rte_mempool_create() and rte_mempool_obj_iter().
*/
-uint32_t rte_mempool_obj_iter(void *vaddr,
- uint32_t elt_num, size_t elt_sz, size_t align,
- const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift,
- rte_mempool_obj_iter_t obj_iter, void *obj_iter_arg);
+typedef void (rte_mempool_obj_cb_t)(struct rte_mempool *mp,
+ void *opaque, void *obj, unsigned obj_idx);
+typedef rte_mempool_obj_cb_t rte_mempool_obj_ctor_t; /* compat */
/**
- * An object constructor callback function for mempool.
+ * A memory callback function for mempool.
*
- * Arguments are the mempool, the opaque pointer given by the user in
- * rte_mempool_create(), the pointer to the element and the index of
- * the element in the pool.
+ * Used by rte_mempool_mem_iter().
*/
-typedef void (rte_mempool_obj_ctor_t)(struct rte_mempool *, void *,
- void *, unsigned);
+typedef void (rte_mempool_mem_cb_t)(struct rte_mempool *mp,
+ void *opaque, struct rte_mempool_memhdr *memhdr,
+ unsigned mem_idx);
/**
* A mempool constructor callback function.
rte_mempool_create(const char *name, unsigned n, unsigned elt_size,
unsigned cache_size, unsigned private_data_size,
rte_mempool_ctor_t *mp_init, void *mp_init_arg,
- rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+ rte_mempool_obj_cb_t *obj_init, void *obj_init_arg,
int socket_id, unsigned flags);
/**
* Create a new mempool named *name* in memory.
*
- * This function uses ``memzone_reserve()`` to allocate memory. The
- * pool contains n elements of elt_size. Its size is set to n.
+ * The pool contains n elements of elt_size. Its size is set to n.
+ * This function uses ``memzone_reserve()`` to allocate the mempool header
+ * (and the objects if vaddr is NULL).
* Depending on the input parameters, mempool elements can be either allocated
* together with the mempool header, or an externally provided memory buffer
* could be used to store mempool objects. In later case, that external
* @param elt_size
* The size of each element.
* @param cache_size
- * If cache_size is non-zero, the rte_mempool library will try to
- * limit the accesses to the common lockless pool, by maintaining a
- * per-lcore object cache. This argument must be lower or equal to
- * CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose
- * cache_size to have "n modulo cache_size == 0": if this is
- * not the case, some elements will always stay in the pool and will
- * never be used. The access to the per-lcore table is of course
- * faster than the multi-producer/consumer pool. The cache can be
- * disabled if the cache_size argument is set to 0; it can be useful to
- * avoid losing objects in cache. Note that even if not used, the
- * memory space for cache is always reserved in a mempool structure,
- * except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0.
+ * Size of the cache. See rte_mempool_create() for details.
* @param private_data_size
* The size of the private data appended after the mempool
* structure. This is useful for storing some private data after the
* An opaque pointer to data that can be used in the mempool
* constructor function.
* @param obj_init
- * A function pointer that is called for each object at
- * initialization of the pool. The user can set some meta data in
- * objects if needed. This parameter can be NULL if not needed.
- * The obj_init() function takes the mempool pointer, the init_arg,
- * the object pointer and the object number as parameters.
+ * A function called for each object at initialization of the pool.
+ * See rte_mempool_create() for details.
* @param obj_init_arg
- * An opaque pointer to data that can be used as an argument for
- * each call to the object constructor function.
+ * An opaque pointer passed to the object constructor function.
* @param socket_id
* The *socket_id* argument is the socket identifier in the case of
* NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
* constraint for the reserved zone.
* @param flags
- * The *flags* arguments is an OR of following flags:
- * - MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread
- * between channels in RAM: the pool allocator will add padding
- * between objects depending on the hardware configuration. See
- * Memory alignment constraints for details. If this flag is set,
- * the allocator will just align them to a cache line.
- * - MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are
- * cache-aligned. This flag removes this constraint, and no
- * padding will be present between objects. This flag implies
- * MEMPOOL_F_NO_SPREAD.
- * - MEMPOOL_F_SP_PUT: If this flag is set, the default behavior
- * when using rte_mempool_put() or rte_mempool_put_bulk() is
- * "single-producer". Otherwise, it is "multi-producers".
- * - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
- * when using rte_mempool_get() or rte_mempool_get_bulk() is
- * "single-consumer". Otherwise, it is "multi-consumers".
+ * Flags controlling the behavior of the mempool. See
+ * rte_mempool_create() for details.
* @param vaddr
* Virtual address of the externally allocated memory buffer.
* Will be used to store mempool objects.
* LOG2 of the physical pages size.
* @return
* The pointer to the new allocated mempool, on success. NULL on error
- * with rte_errno set appropriately. Possible rte_errno values include:
- * - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
- * - E_RTE_SECONDARY - function was called from a secondary process instance
- * - EINVAL - cache size provided is too large
- * - ENOSPC - the maximum number of memzones has already been allocated
- * - EEXIST - a memzone with the same name already exists
- * - ENOMEM - no appropriate memory area found in which to create memzone
+ * with rte_errno set appropriately. See rte_mempool_create() for details.
*/
struct rte_mempool *
rte_mempool_xmem_create(const char *name, unsigned n, unsigned elt_size,
unsigned cache_size, unsigned private_data_size,
rte_mempool_ctor_t *mp_init, void *mp_init_arg,
- rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+ rte_mempool_obj_cb_t *obj_init, void *obj_init_arg,
int socket_id, unsigned flags, void *vaddr,
const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift);
rte_dom0_mempool_create(const char *name, unsigned n, unsigned elt_size,
unsigned cache_size, unsigned private_data_size,
rte_mempool_ctor_t *mp_init, void *mp_init_arg,
- rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+ rte_mempool_obj_cb_t *obj_init, void *obj_init_arg,
int socket_id, unsigned flags);
+/**
+ * Call a function for each mempool element
+ *
+ * Iterate across all objects attached to a rte_mempool and call the
+ * callback function on it.
+ *
+ * @param mp
+ * A pointer to an initialized mempool.
+ * @param obj_cb
+ * A function pointer that is called for each object.
+ * @param obj_cb_arg
+ * An opaque pointer passed to the callback function.
+ * @return
+ * Number of objects iterated.
+ */
+uint32_t rte_mempool_obj_iter(struct rte_mempool *mp,
+ rte_mempool_obj_cb_t *obj_cb, void *obj_cb_arg);
+
+/**
+ * Call a function for each mempool memory chunk
+ *
+ * Iterate across all memory chunks attached to a rte_mempool and call
+ * the callback function on it.
+ *
+ * @param mp
+ * A pointer to an initialized mempool.
+ * @param mem_cb
+ * A function pointer that is called for each memory chunk.
+ * @param mem_cb_arg
+ * An opaque pointer passed to the callback function.
+ * @return
+ * Number of memory chunks iterated.
+ */
+uint32_t rte_mempool_mem_iter(struct rte_mempool *mp,
+ rte_mempool_mem_cb_t *mem_cb, void *mem_cb_arg);
+
/**
* Dump the status of the mempool to the console.
*
* @param mp
* A pointer to the mempool structure.
*/
-void rte_mempool_dump(FILE *f, const struct rte_mempool *mp);
+void rte_mempool_dump(FILE *f, struct rte_mempool *mp);
/**
* @internal Put several objects back in the mempool; used internally.
__mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table,
unsigned n, int is_mp)
{
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
struct rte_mempool_cache *cache;
uint32_t index;
void **cache_objs;
unsigned lcore_id = rte_lcore_id();
uint32_t cache_size = mp->cache_size;
uint32_t flushthresh = mp->cache_flushthresh;
-#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
/* increment stat now, adding in mempool always success */
__MEMPOOL_STAT_ADD(mp, put, n);
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
/* cache is not enabled or single producer or non-EAL thread */
if (unlikely(cache_size == 0 || is_mp == 0 ||
lcore_id >= RTE_MAX_LCORE))
return;
ring_enqueue:
-#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
/* push remaining objects in ring */
#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
unsigned n, int is_mc)
{
int ret;
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
struct rte_mempool_cache *cache;
uint32_t index, len;
void **cache_objs;
return 0;
ring_dequeue:
-#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
/* get remaining objects from ring */
if (is_mc)
* The physical address of the elt element.
*/
static inline phys_addr_t
-rte_mempool_virt2phy(const struct rte_mempool *mp, const void *elt)
+rte_mempool_virt2phy(__rte_unused const struct rte_mempool *mp, const void *elt)
{
- if (rte_eal_has_hugepages()) {
- uintptr_t off;
-
- off = (const char *)elt - (const char *)mp->elt_va_start;
- return mp->elt_pa[off >> mp->pg_shift] + (off & mp->pg_mask);
- } else {
- /*
- * If huge pages are disabled, we cannot assume the
- * memory region to be physically contiguous.
- * Lookup for each element.
- */
- return rte_mem_virt2phy(elt);
- }
+ const struct rte_mempool_objhdr *hdr;
+ hdr = (const struct rte_mempool_objhdr *)RTE_PTR_SUB(elt,
+ sizeof(*hdr));
+ return hdr->physaddr;
}
/**
* @param mp
* A pointer to the mempool structure.
*/
-void rte_mempool_audit(const struct rte_mempool *mp);
+void rte_mempool_audit(struct rte_mempool *mp);
/**
* Return a pointer to the private data in an mempool structure.
*/
static inline void *rte_mempool_get_priv(struct rte_mempool *mp)
{
- return (char *)mp + MEMPOOL_HEADER_SIZE(mp, mp->pg_num);
+ return (char *)mp +
+ MEMPOOL_HEADER_SIZE(mp, mp->cache_size);
}
/**
* calculates header, trailer, body and total sizes of the mempool object.
*
* @param elt_size
- * The size of each element.
+ * The size of each element, without header and trailer.
* @param flags
* The flags used for the mempool creation.
* Consult rte_mempool_create() for more information about possible values.
*
* @param elt_num
* Number of elements.
- * @param elt_sz
- * The size of each element.
+ * @param total_elt_sz
+ * The size of each element, including header and trailer, as returned
+ * by rte_mempool_calc_obj_size().
* @param pg_shift
- * LOG2 of the physical pages size.
+ * LOG2 of the physical pages size. If set to 0, ignore page boundaries.
* @return
* Required memory size aligned at page boundary.
*/
-size_t rte_mempool_xmem_size(uint32_t elt_num, size_t elt_sz,
+size_t rte_mempool_xmem_size(uint32_t elt_num, size_t total_elt_sz,
uint32_t pg_shift);
/**
* Will be used to store mempool objects.
* @param elt_num
* Number of elements.
- * @param elt_sz
- * The size of each element.
+ * @param total_elt_sz
+ * The size of each element, including header and trailer, as returned
+ * by rte_mempool_calc_obj_size().
* @param paddr
* Array of physical addresses of the pages that comprises given memory
* buffer.
* buffer is too small, return a negative value whose absolute value
* is the actual number of elements that can be stored in that buffer.
*/
-ssize_t rte_mempool_xmem_usage(void *vaddr, uint32_t elt_num, size_t elt_sz,
- const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift);
+ssize_t rte_mempool_xmem_usage(void *vaddr, uint32_t elt_num,
+ size_t total_elt_sz, const phys_addr_t paddr[], uint32_t pg_num,
+ uint32_t pg_shift);
/**
* Walk list of all memory pools
* @param arg
* Argument passed to iterator
*/
-void rte_mempool_walk(void (*func)(const struct rte_mempool *, void *arg),
+void rte_mempool_walk(void (*func)(struct rte_mempool *, void *arg),
void *arg);
#ifdef __cplusplus
git.droids-corp.org / dpdk.git / blobdiff