* meta-data in the object data and retrieve them when allocating a
* new object.
*
- * Note: the mempool implementation is not preemptable. A lcore must
- * not be interrupted by another task that uses the same mempool
- * (because it uses a ring which is not preemptable). Also, mempool
- * functions must not be used outside the DPDK environment: for
- * example, in linuxapp environment, a thread that is not created by
- * the EAL must not use mempools. This is due to the per-lcore cache
- * that won't work as rte_lcore_id() will not return a correct value.
+ * Note: the mempool implementation is not preemptible. An lcore must not be
+ * interrupted by another task that uses the same mempool (because it uses a
+ * ring which is not preemptible). Also, usual mempool functions like
+ * rte_mempool_get() or rte_mempool_put() are designed to be called from an EAL
+ * thread due to the internal per-lcore cache. Due to the lack of caching,
+ * rte_mempool_get() or rte_mempool_put() performance will suffer when called
+ * by non-EAL threads. Instead, non-EAL threads should call
+ * rte_mempool_generic_get() or rte_mempool_generic_put() with a user cache
+ * created with rte_mempool_cache_create().
*/
#include <stdio.h>
* when using rte_mempool_get() or rte_mempool_get_bulk() is
* "single-consumer". Otherwise, it is "multi-consumers".
* - MEMPOOL_F_NO_PHYS_CONTIG: If set, allocated objects won't
- * necessarilly be contiguous in physical memory.
+ * necessarily be contiguous in physical memory.
* @return
* The pointer to the new allocated mempool, on success. NULL on error
* with rte_errno set appropriately. Possible rte_errno values include:
* Add physically contiguous memory for objects in the pool at init
*
* Add a virtually and physically contiguous memory chunk in the pool
- * where objects can be instanciated.
+ * where objects can be instantiated.
*
* If the given physical address is unknown (paddr = RTE_BAD_PHYS_ADDR),
* the chunk doesn't need to be physically contiguous (only virtually),
* Add physical memory for objects in the pool at init
*
* Add a virtually contiguous memory chunk in the pool where objects can
- * be instanciated. The physical addresses corresponding to the virtual
+ * be instantiated. The physical addresses corresponding to the virtual
* area are described in paddr[], pg_num, pg_shift.
*
* @param mp
* Add virtually contiguous memory for objects in the pool at init
*
* Add a virtually contiguous memory chunk in the pool where objects can
- * be instanciated.
+ * be instantiated.
*
* @param mp
* A pointer to the mempool structure.
* @param mp
* A pointer to the mempool.
*/
-static inline void __attribute__((always_inline))
+static __rte_always_inline void
rte_mempool_cache_flush(struct rte_mempool_cache *cache,
struct rte_mempool *mp)
{
* @return
* A pointer to the mempool cache or NULL if disabled or non-EAL thread.
*/
-static inline struct rte_mempool_cache *__attribute__((always_inline))
+static __rte_always_inline struct rte_mempool_cache *
rte_mempool_default_cache(struct rte_mempool *mp, unsigned lcore_id)
{
if (mp->cache_size == 0)
* positive.
* @param cache
* A pointer to a mempool cache structure. May be NULL if not needed.
- * @param flags
- * The flags used for the mempool creation.
- * Single-producer (MEMPOOL_F_SP_PUT flag) or multi-producers.
*/
-static inline void __attribute__((always_inline))
+static __rte_always_inline void
__mempool_generic_put(struct rte_mempool *mp, void * const *obj_table,
- unsigned n, struct rte_mempool_cache *cache)
+ unsigned int n, struct rte_mempool_cache *cache)
{
void **cache_objs;
* The number of objects to add in the mempool from the obj_table.
* @param cache
* A pointer to a mempool cache structure. May be NULL if not needed.
- * @param flags
- * The flags used for the mempool creation.
- * Single-producer (MEMPOOL_F_SP_PUT flag) or multi-producers.
*/
-static inline void __attribute__((always_inline))
+static __rte_always_inline void
rte_mempool_generic_put(struct rte_mempool *mp, void * const *obj_table,
- unsigned n, struct rte_mempool_cache *cache,
- __rte_unused int flags)
+ unsigned int n, struct rte_mempool_cache *cache)
{
__mempool_check_cookies(mp, obj_table, n, 0);
__mempool_generic_put(mp, obj_table, n, cache);
}
-/**
- * @deprecated
- * Put several objects back in the mempool (multi-producers safe).
- *
- * @param mp
- * A pointer to the mempool structure.
- * @param obj_table
- * A pointer to a table of void * pointers (objects).
- * @param n
- * The number of objects to add in the mempool from the obj_table.
- */
-__rte_deprecated
-static inline void __attribute__((always_inline))
-rte_mempool_mp_put_bulk(struct rte_mempool *mp, void * const *obj_table,
- unsigned n)
-{
- struct rte_mempool_cache *cache;
- cache = rte_mempool_default_cache(mp, rte_lcore_id());
- rte_mempool_generic_put(mp, obj_table, n, cache, 0);
-}
-
-/**
- * @deprecated
- * Put several objects back in the mempool (NOT multi-producers safe).
- *
- * @param mp
- * A pointer to the mempool structure.
- * @param obj_table
- * A pointer to a table of void * pointers (objects).
- * @param n
- * The number of objects to add in the mempool from obj_table.
- */
-__rte_deprecated
-static inline void __attribute__((always_inline))
-rte_mempool_sp_put_bulk(struct rte_mempool *mp, void * const *obj_table,
- unsigned n)
-{
- rte_mempool_generic_put(mp, obj_table, n, NULL, MEMPOOL_F_SP_PUT);
-}
-
/**
* Put several objects back in the mempool.
*
* @param n
* The number of objects to add in the mempool from obj_table.
*/
-static inline void __attribute__((always_inline))
+static __rte_always_inline void
rte_mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table,
- unsigned n)
-{
- struct rte_mempool_cache *cache;
- cache = rte_mempool_default_cache(mp, rte_lcore_id());
- rte_mempool_generic_put(mp, obj_table, n, cache, mp->flags);
-}
-
-/**
- * @deprecated
- * Put one object in the mempool (multi-producers safe).
- *
- * @param mp
- * A pointer to the mempool structure.
- * @param obj
- * A pointer to the object to be added.
- */
-__rte_deprecated
-static inline void __attribute__((always_inline))
-rte_mempool_mp_put(struct rte_mempool *mp, void *obj)
+ unsigned int n)
{
struct rte_mempool_cache *cache;
cache = rte_mempool_default_cache(mp, rte_lcore_id());
- rte_mempool_generic_put(mp, &obj, 1, cache, 0);
-}
-
-/**
- * @deprecated
- * Put one object back in the mempool (NOT multi-producers safe).
- *
- * @param mp
- * A pointer to the mempool structure.
- * @param obj
- * A pointer to the object to be added.
- */
-__rte_deprecated
-static inline void __attribute__((always_inline))
-rte_mempool_sp_put(struct rte_mempool *mp, void *obj)
-{
- rte_mempool_generic_put(mp, &obj, 1, NULL, MEMPOOL_F_SP_PUT);
+ rte_mempool_generic_put(mp, obj_table, n, cache);
}
/**
* @param obj
* A pointer to the object to be added.
*/
-static inline void __attribute__((always_inline))
+static __rte_always_inline void
rte_mempool_put(struct rte_mempool *mp, void *obj)
{
rte_mempool_put_bulk(mp, &obj, 1);
* The number of objects to get, must be strictly positive.
* @param cache
* A pointer to a mempool cache structure. May be NULL if not needed.
- * @param flags
- * The flags used for the mempool creation.
- * Single-consumer (MEMPOOL_F_SC_GET flag) or multi-consumers.
* @return
* - >=0: Success; number of objects supplied.
* - <0: Error; code of ring dequeue function.
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline int
__mempool_generic_get(struct rte_mempool *mp, void **obj_table,
- unsigned n, struct rte_mempool_cache *cache)
+ unsigned int n, struct rte_mempool_cache *cache)
{
int ret;
uint32_t index, len;
* The number of objects to get from mempool to obj_table.
* @param cache
* A pointer to a mempool cache structure. May be NULL if not needed.
- * @param flags
- * The flags used for the mempool creation.
- * Single-consumer (MEMPOOL_F_SC_GET flag) or multi-consumers.
* @return
* - 0: Success; objects taken.
* - -ENOENT: Not enough entries in the mempool; no object is retrieved.
*/
-static inline int __attribute__((always_inline))
-rte_mempool_generic_get(struct rte_mempool *mp, void **obj_table, unsigned n,
- struct rte_mempool_cache *cache, __rte_unused int flags)
+static __rte_always_inline int
+rte_mempool_generic_get(struct rte_mempool *mp, void **obj_table,
+ unsigned int n, struct rte_mempool_cache *cache)
{
int ret;
ret = __mempool_generic_get(mp, obj_table, n, cache);
return ret;
}
-/**
- * @deprecated
- * Get several objects from the mempool (multi-consumers safe).
- *
- * If cache is enabled, objects will be retrieved first from cache,
- * subsequently from the common pool. Note that it can return -ENOENT when
- * the local cache and common pool are empty, even if cache from other
- * lcores are full.
- *
- * @param mp
- * A pointer to the mempool structure.
- * @param obj_table
- * A pointer to a table of void * pointers (objects) that will be filled.
- * @param n
- * The number of objects to get from mempool to obj_table.
- * @return
- * - 0: Success; objects taken.
- * - -ENOENT: Not enough entries in the mempool; no object is retrieved.
- */
-__rte_deprecated
-static inline int __attribute__((always_inline))
-rte_mempool_mc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n)
-{
- struct rte_mempool_cache *cache;
- cache = rte_mempool_default_cache(mp, rte_lcore_id());
- return rte_mempool_generic_get(mp, obj_table, n, cache, 0);
-}
-
-/**
- * @deprecated
- * Get several objects from the mempool (NOT multi-consumers safe).
- *
- * If cache is enabled, objects will be retrieved first from cache,
- * subsequently from the common pool. Note that it can return -ENOENT when
- * the local cache and common pool are empty, even if cache from other
- * lcores are full.
- *
- * @param mp
- * A pointer to the mempool structure.
- * @param obj_table
- * A pointer to a table of void * pointers (objects) that will be filled.
- * @param n
- * The number of objects to get from the mempool to obj_table.
- * @return
- * - 0: Success; objects taken.
- * - -ENOENT: Not enough entries in the mempool; no object is
- * retrieved.
- */
-__rte_deprecated
-static inline int __attribute__((always_inline))
-rte_mempool_sc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n)
-{
- return rte_mempool_generic_get(mp, obj_table, n, NULL,
- MEMPOOL_F_SC_GET);
-}
-
/**
* Get several objects from the mempool.
*
* - 0: Success; objects taken
* - -ENOENT: Not enough entries in the mempool; no object is retrieved.
*/
-static inline int __attribute__((always_inline))
-rte_mempool_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n)
+static __rte_always_inline int
+rte_mempool_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned int n)
{
struct rte_mempool_cache *cache;
cache = rte_mempool_default_cache(mp, rte_lcore_id());
- return rte_mempool_generic_get(mp, obj_table, n, cache, mp->flags);
-}
-
-/**
- * @deprecated
- * Get one object from the mempool (multi-consumers safe).
- *
- * If cache is enabled, objects will be retrieved first from cache,
- * subsequently from the common pool. Note that it can return -ENOENT when
- * the local cache and common pool are empty, even if cache from other
- * lcores are full.
- *
- * @param mp
- * A pointer to the mempool structure.
- * @param obj_p
- * A pointer to a void * pointer (object) that will be filled.
- * @return
- * - 0: Success; objects taken.
- * - -ENOENT: Not enough entries in the mempool; no object is retrieved.
- */
-__rte_deprecated
-static inline int __attribute__((always_inline))
-rte_mempool_mc_get(struct rte_mempool *mp, void **obj_p)
-{
- struct rte_mempool_cache *cache;
- cache = rte_mempool_default_cache(mp, rte_lcore_id());
- return rte_mempool_generic_get(mp, obj_p, 1, cache, 0);
-}
-
-/**
- * @deprecated
- * Get one object from the mempool (NOT multi-consumers safe).
- *
- * If cache is enabled, objects will be retrieved first from cache,
- * subsequently from the common pool. Note that it can return -ENOENT when
- * the local cache and common pool are empty, even if cache from other
- * lcores are full.
- *
- * @param mp
- * A pointer to the mempool structure.
- * @param obj_p
- * A pointer to a void * pointer (object) that will be filled.
- * @return
- * - 0: Success; objects taken.
- * - -ENOENT: Not enough entries in the mempool; no object is retrieved.
- */
-__rte_deprecated
-static inline int __attribute__((always_inline))
-rte_mempool_sc_get(struct rte_mempool *mp, void **obj_p)
-{
- return rte_mempool_generic_get(mp, obj_p, 1, NULL, MEMPOOL_F_SC_GET);
+ return rte_mempool_generic_get(mp, obj_table, n, cache);
}
/**
* - 0: Success; objects taken.
* - -ENOENT: Not enough entries in the mempool; no object is retrieved.
*/
-static inline int __attribute__((always_inline))
+static __rte_always_inline int
rte_mempool_get(struct rte_mempool *mp, void **obj_p)
{
return rte_mempool_get_bulk(mp, obj_p, 1);
git.droids-corp.org / dpdk.git / blobdiff