if ((hw->mac.type != ixgbe_mac_82599EB) && (hw->mac.type != ixgbe_mac_X540))
return -ENOSYS;
- PMD_INIT_LOG(INFO, "Setting port %d, %s queue_id %d to stat index %d\n",
+ PMD_INIT_LOG(INFO, "Setting port %d, %s queue_id %d to stat index %d",
(int)(eth_dev->data->port_id), is_rx ? "RX" : "TX",
queue_id, stat_idx);
n = (uint8_t)(queue_id / NB_QMAP_FIELDS_PER_QSM_REG);
if (n >= IXGBE_NB_STAT_MAPPING_REGS) {
- PMD_INIT_LOG(ERR, "Nb of stat mapping registers exceeded\n");
+ PMD_INIT_LOG(ERR, "Nb of stat mapping registers exceeded");
return -EIO;
}
offset = (uint8_t)(queue_id % NB_QMAP_FIELDS_PER_QSM_REG);
else
stat_mappings->rqsmr[n] |= qsmr_mask;
- PMD_INIT_LOG(INFO, "Set port %d, %s queue_id %d to stat index %d\n"
- "%s[%d] = 0x%08x\n",
+ PMD_INIT_LOG(INFO, "Set port %d, %s queue_id %d to stat index %d",
(int)(eth_dev->data->port_id), is_rx ? "RX" : "TX",
- queue_id, stat_idx, is_rx ? "RQSMR" : "TQSM", n,
+ queue_id, stat_idx);
+ PMD_INIT_LOG(INFO, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
is_rx ? stat_mappings->rqsmr[n] : stat_mappings->tqsm[n]);
/* Now write the mapping in the appropriate register */
if (is_rx) {
- PMD_INIT_LOG(INFO, "Write 0x%x to RX IXGBE stat mapping reg:%d\n",
+ PMD_INIT_LOG(INFO, "Write 0x%x to RX IXGBE stat mapping reg:%d",
stat_mappings->rqsmr[n], n);
IXGBE_WRITE_REG(hw, IXGBE_RQSMR(n), stat_mappings->rqsmr[n]);
}
else {
- PMD_INIT_LOG(INFO, "Write 0x%x to TX IXGBE stat mapping reg:%d\n",
+ PMD_INIT_LOG(INFO, "Write 0x%x to TX IXGBE stat mapping reg:%d",
stat_mappings->tqsm[n], n);
IXGBE_WRITE_REG(hw, IXGBE_TQSM(n), stat_mappings->tqsm[n]);
}
if (diag == IXGBE_ERR_EEPROM_VERSION) {
PMD_INIT_LOG(ERR, "This device is a pre-production adapter/"
"LOM. Please be aware there may be issues associated "
- "with your hardware.\n If you are experiencing problems "
+ "with your hardware.");
+ PMD_INIT_LOG(ERR, "If you are experiencing problems "
"please contact your Intel or hardware representative "
- "who provided you with this hardware.\n");
+ "who provided you with this hardware.");
} else if (diag == IXGBE_ERR_SFP_NOT_SUPPORTED)
- PMD_INIT_LOG(ERR, "Unsupported SFP+ Module\n");
+ PMD_INIT_LOG(ERR, "Unsupported SFP+ Module");
if (diag) {
PMD_INIT_LOG(ERR, "Hardware Initialization Failure: %d", diag);
return -EIO;
IXGBE_WRITE_FLUSH(hw);
if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
- PMD_INIT_LOG(DEBUG, "MAC: %d, PHY: %d, SFP+: %d<n",
+ PMD_INIT_LOG(DEBUG, "MAC: %d, PHY: %d, SFP+: %d",
(int) hw->mac.type, (int) hw->phy.type,
(int) hw->phy.sfp_type);
else
- PMD_INIT_LOG(DEBUG, "MAC: %d, PHY: %d\n",
+ PMD_INIT_LOG(DEBUG, "MAC: %d, PHY: %d",
(int) hw->mac.type, (int) hw->phy.type);
PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x",
return (-EIO);
}
- PMD_INIT_LOG(DEBUG, "\nport %d vendorID=0x%x deviceID=0x%x mac.type=%s\n",
+ PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x mac.type=%s",
eth_dev->data->port_id, pci_dev->id.vendor_id,
pci_dev->id.device_id, "ixgbe_mac_82599_vf");
/* IXGBE devices don't support half duplex */
if ((dev->data->dev_conf.link_duplex != ETH_LINK_AUTONEG_DUPLEX) &&
(dev->data->dev_conf.link_duplex != ETH_LINK_FULL_DUPLEX)) {
- PMD_INIT_LOG(ERR, "Invalid link_duplex (%hu) for port %hhu\n",
+ PMD_INIT_LOG(ERR, "Invalid link_duplex (%hu) for port %hhu",
dev->data->dev_conf.link_duplex,
dev->data->port_id);
return -EINVAL;
/* This can fail when allocating mbufs for descriptor rings */
err = ixgbe_dev_rx_init(dev);
if (err) {
- PMD_INIT_LOG(ERR, "Unable to initialize RX hardware\n");
+ PMD_INIT_LOG(ERR, "Unable to initialize RX hardware");
goto error;
}
speed = IXGBE_LINK_SPEED_10GB_FULL;
break;
default:
- PMD_INIT_LOG(ERR, "Invalid link_speed (%hu) for port %hhu\n",
+ PMD_INIT_LOG(ERR, "Invalid link_speed (%hu) for port %hhu",
dev->data->dev_conf.link_speed,
dev->data->port_id);
goto error;
#ifdef RTE_NIC_BYPASS
if (hw->device_id == IXGBE_DEV_ID_82599_BYPASS) {
/* Not suported in bypass mode */
- PMD_INIT_LOG(ERR, "\nSet link up is not supported "
- "by device id 0x%x\n", hw->device_id);
+ PMD_INIT_LOG(ERR, "Set link up is not supported "
+ "by device id 0x%x", hw->device_id);
return -ENOTSUP;
}
#endif
return 0;
}
- PMD_INIT_LOG(ERR, "\nSet link up is not supported by device id 0x%x\n",
+ PMD_INIT_LOG(ERR, "Set link up is not supported by device id 0x%x",
hw->device_id);
return -ENOTSUP;
}
#ifdef RTE_NIC_BYPASS
if (hw->device_id == IXGBE_DEV_ID_82599_BYPASS) {
/* Not suported in bypass mode */
- PMD_INIT_LOG(ERR, "\nSet link down is not supported "
- "by device id 0x%x\n", hw->device_id);
+ PMD_INIT_LOG(ERR, "Set link down is not supported "
+ "by device id 0x%x", hw->device_id);
return -ENOTSUP;
}
#endif
return 0;
}
- PMD_INIT_LOG(ERR, "\nSet link down is not supported by device id 0x%x\n",
+ PMD_INIT_LOG(ERR, "Set link down is not supported by device id 0x%x",
hw->device_id);
return -ENOTSUP;
}
struct rte_eth_link link;
int intr_enable_delay = false;
- PMD_DRV_LOG(DEBUG, "intr action type %d\n", intr->flags);
+ PMD_DRV_LOG(DEBUG, "intr action type %d", intr->flags);
if (intr->flags & IXGBE_FLAG_MAILBOX) {
ixgbe_pf_mbx_process(dev);
_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC);
}
- PMD_DRV_LOG(DEBUG, "enable intr in delayed handler S[%08x]\n", eicr);
+ PMD_DRV_LOG(DEBUG, "enable intr in delayed handler S[%08x]", eicr);
ixgbe_enable_intr(dev);
rte_intr_enable(&(dev->pci_dev->intr_handle));
}
if (fc_conf->autoneg != !hw->fc.disable_fc_autoneg)
return -ENOTSUP;
rx_buf_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0));
- PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
+ PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x", rx_buf_size);
/*
* At least reserve one Ethernet frame for watermark
max_high_water = (rx_buf_size - ETHER_MAX_LEN) >> IXGBE_RXPBSIZE_SHIFT;
if ((fc_conf->high_water > max_high_water) ||
(fc_conf->high_water < fc_conf->low_water)) {
- PMD_INIT_LOG(ERR, "Invalid high/low water setup value in KB\n");
- PMD_INIT_LOG(ERR, "High_water must <= 0x%x\n", max_high_water);
+ PMD_INIT_LOG(ERR, "Invalid high/low water setup value in KB");
+ PMD_INIT_LOG(ERR, "High_water must <= 0x%x", max_high_water);
return (-EINVAL);
}
return 0;
}
- PMD_INIT_LOG(ERR, "ixgbe_fc_enable = 0x%x \n", err);
+ PMD_INIT_LOG(ERR, "ixgbe_fc_enable = 0x%x", err);
return -EIO;
}
if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
/* High/Low water can not be 0 */
if( (!hw->fc.high_water[tc_num])|| (!hw->fc.low_water[tc_num])) {
- PMD_INIT_LOG(ERR, "Invalid water mark configuration\n");
+ PMD_INIT_LOG(ERR, "Invalid water mark configuration");
ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
goto out;
}
if(hw->fc.low_water[tc_num] >= hw->fc.high_water[tc_num]) {
- PMD_INIT_LOG(ERR, "Invalid water mark configuration\n");
+ PMD_INIT_LOG(ERR, "Invalid water mark configuration");
ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
goto out;
}
ixgbe_dcb_unpack_map_cee(dcb_config, IXGBE_DCB_RX_CONFIG, map);
tc_num = map[pfc_conf->priority];
rx_buf_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(tc_num));
- PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
+ PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x", rx_buf_size);
/*
* At least reserve one Ethernet frame for watermark
* high_water/low_water in kilo bytes for ixgbe
max_high_water = (rx_buf_size - ETHER_MAX_LEN) >> IXGBE_RXPBSIZE_SHIFT;
if ((pfc_conf->fc.high_water > max_high_water) ||
(pfc_conf->fc.high_water <= pfc_conf->fc.low_water)) {
- PMD_INIT_LOG(ERR, "Invalid high/low water setup value in KB\n");
- PMD_INIT_LOG(ERR, "High_water must <= 0x%x\n", max_high_water);
+ PMD_INIT_LOG(ERR, "Invalid high/low water setup value in KB");
+ PMD_INIT_LOG(ERR, "High_water must <= 0x%x", max_high_water);
return (-EINVAL);
}
if ((err == IXGBE_SUCCESS) || (err == IXGBE_ERR_FC_NOT_NEGOTIATED))
return 0;
- PMD_INIT_LOG(ERR, "ixgbe_dcb_pfc_enable = 0x%x \n", err);
+ PMD_INIT_LOG(ERR, "ixgbe_dcb_pfc_enable = 0x%x", err);
return -EIO;
}
{
struct rte_eth_conf* conf = &dev->data->dev_conf;
- PMD_INIT_LOG(DEBUG, "\nConfigured Virtual Function port id: %d\n",
+ PMD_INIT_LOG(DEBUG, "Configured Virtual Function port id: %d",
dev->data->port_id);
/*
*/
#ifndef RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC
if (!conf->rxmode.hw_strip_crc) {
- PMD_INIT_LOG(INFO, "VF can't disable HW CRC Strip\n");
+ PMD_INIT_LOG(INFO, "VF can't disable HW CRC Strip");
conf->rxmode.hw_strip_crc = 1;
}
#else
if (conf->rxmode.hw_strip_crc) {
- PMD_INIT_LOG(INFO, "VF can't enable HW CRC Strip\n");
+ PMD_INIT_LOG(INFO, "VF can't enable HW CRC Strip");
conf->rxmode.hw_strip_crc = 0;
}
#endif
/* This can fail when allocating mbufs for descriptor rings */
err = ixgbevf_dev_rx_init(dev);
if (err) {
- PMD_INIT_LOG(ERR, "Unable to initialize RX hardware (%d)\n",
- err);
+ PMD_INIT_LOG(ERR, "Unable to initialize RX hardware (%d)", err);
ixgbe_dev_clear_queues(dev);
return err;
}
/* we only need to do this if VMDq is enabled */
reg_val = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
if (!(reg_val & IXGBE_VT_CTL_VT_ENABLE)) {
- PMD_INIT_LOG(ERR, "VMDq must be enabled for this setting\n");
+ PMD_INIT_LOG(ERR, "VMDq must be enabled for this setting");
return (-1);
}
if (hw->mac.type == ixgbe_mac_82598EB) {
PMD_INIT_LOG(ERR, "setting VF receive mode set should be done"
- " on 82599 hardware and newer\n");
+ " on 82599 hardware and newer");
return (-ENOTSUP);
}
if (ixgbe_vmdq_mode_check(hw) < 0)