The pdump tool works as the secondary process. When the primary process
exits and the residual secondary process keeps running, it will make the
primary process can't start up again. Since the ex-fbarry files are still
attached by the secondary process pdump, the 'new' primary process can't
get these files locked.
The patch is to set up an alarm which runs every 0.5s periodically
to monitor the primary process in the pdump. Once the primary exits,
so will the pdump.
Signed-off-by: Suanming Mou <mousuanming@huawei.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
#include <net/if.h>
#include <rte_eal.h>
#include <net/if.h>
#include <rte_eal.h>
#include <rte_common.h>
#include <rte_debug.h>
#include <rte_ethdev.h>
#include <rte_common.h>
#include <rte_debug.h>
#include <rte_ethdev.h>
#define SIZE 256
#define BURST_SIZE 32
#define NUM_VDEVS 2
#define SIZE 256
#define BURST_SIZE 32
#define NUM_VDEVS 2
+/* Maximum delay for exiting after primary process. */
+#define MONITOR_INTERVAL (500 * 1000)
/* true if x is a power of 2 */
#define POWEROF2(x) ((((x)-1) & (x)) == 0)
/* true if x is a power of 2 */
#define POWEROF2(x) ((((x)-1) & (x)) == 0)
+static void
+monitor_primary(void *arg __rte_unused)
+{
+ if (quit_signal)
+ return;
+
+ if (rte_eal_primary_proc_alive(NULL)) {
+ rte_eal_alarm_set(MONITOR_INTERVAL, monitor_primary, NULL);
+ return;
+ }
+
+ printf("Primary process is no longer active, exiting...\n");
+ quit_signal = 1;
+}
+
static void
print_pdump_stats(void)
{
static void
print_pdump_stats(void)
{
+static void
+disable_primary_monitor(void)
+{
+ int ret;
+
+ /*
+ * Cancel monitoring of primary process.
+ * There will be no error if no alarm is set
+ * (in case primary process kill was detected earlier).
+ */
+ ret = rte_eal_alarm_cancel(monitor_primary, NULL);
+ if (ret < 0)
+ printf("Fail to disable monitor:%d\n", ret);
+}
+
static void
signal_handler(int sig_num)
{
static void
signal_handler(int sig_num)
{
+static void
+enable_primary_monitor(void)
+{
+ int ret;
+
+ /* Once primary exits, so will pdump. */
+ ret = rte_eal_alarm_set(MONITOR_INTERVAL, monitor_primary, NULL);
+ if (ret < 0)
+ printf("Fail to enable monitor:%d\n", ret);
+}
+
int
main(int argc, char **argv)
{
int
main(int argc, char **argv)
{
/* create mempool, ring and vdevs info */
create_mp_ring_vdev();
enable_pdump();
/* create mempool, ring and vdevs info */
create_mp_ring_vdev();
enable_pdump();
+ enable_primary_monitor();
+ disable_primary_monitor();
cleanup_pdump_resources();
/* dump debug stats */
print_pdump_stats();
cleanup_pdump_resources();
/* dump debug stats */
print_pdump_stats();
Added telemetry mode to l3fwd-power application to report
application level busyness, empty and full polls of rte_eth_rx_burst().
Added telemetry mode to l3fwd-power application to report
application level busyness, empty and full polls of rte_eth_rx_burst().
+* **Updated the pdump application.**
+
+ Add support for pdump to exit with primary process.
+
Removed Items
-------------
Removed Items
-------------
Once the libpcap development files are installed, the libpcap based PMD
can be enabled by setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling the DPDK.
Once the libpcap development files are installed, the libpcap based PMD
can be enabled by setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling the DPDK.
+ * The ``dpdk-pdump`` tool runs as a DPDK secondary process. It exits when
+ the primary application exits.
+
Running the Application
-----------------------
Running the Application
-----------------------