net/hns3: fix status after repeated resets

Currently, when performing the following test case:
1. Run testpmd application based on hns3 PF device.
2. Inject reset(global/IMP reset) repeatedly.
After the reset, the network port can't link up.

In the RESET_STAGE_DEV_INIT stage of the reset process, the driver will
reinitialize the hardware. If global/IMP reset occurs at this time
again, the operation of reinitialize the hardware will fail because that
firmware don't respond to the configuration commands issued by driver.
In current driver, when failed to reinitialize the hardware, rollback
operation is done, such as clearing the relevant configuration of the
command queue registers.

If firmware detects that the function's command queue register is not
configured correctly, it will not complete the reset related hardware
configuration for this function, resulting in that driver can't detect
that the hardware reset has been completed. And then the reset process
of the driver exit abnormally, the hardware can not work normally after
reset.

This patch fixes it by avoid clearing the command queue related
registers when failed to reinitialize the hardware in the
RESET_STAGE_DEV_INIT stage of the reset process.

Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>