net/thunderx: add support for hardware first skip feature

This feature is used to create a hole between HEADROOM
and actual data.Size of hole is specified in bytes as
module param to pmd

Signed-off-by: Rakesh Kudurumalla <rkudurumalla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

diff --git a/doc/guides/nics/thunderx.rst b/doc/guides/nics/thunderx.rst
index 2642374..e84eaaf 100644 (file)
--- a/doc/guides/nics/thunderx.rst
+++ b/doc/guides/nics/thunderx.rst
@@ -30,6 +30,7 @@ Features of the ThunderX PMD are:
 - SR-IOV VF
 - NUMA support
 - Multi queue set support (up to 96 queues (12 queue sets)) per port
+- Skip data bytes
 
 Supported ThunderX SoCs
 -----------------------
@@ -312,6 +313,21 @@ We will choose four secondary queue sets from the ending of the list (0002:01:01
 
 The nicvf thunderx driver will make use of attached secondary VFs automatically during the interface configuration stage.
 
+
+Module params
+--------------
+
+skip_data_bytes
+~~~~~~~~~~~~~~~
+This feature is used to create a hole between HEADROOM and actual data. Size of hole is specified
+in bytes as module param("skip_data_bytes") to pmd.
+This scheme is useful when application would like to insert vlan header without disturbing HEADROOM.
+
+Example:
+   .. code-block:: console
+
+      -w 0002:01:00.2,skip_data_bytes=8
+
 Limitations
 -----------
 
@@ -335,3 +351,8 @@ Maximum packet segments
 The ThunderX SoC family NICs support up to 12 segments per packet when working
 in scatter/gather mode. So, setting MTU will result with ``EINVAL`` when the
 frame size does not fit in the maximum number of segments.
+
+skip_data_bytes
+~~~~~~~~~~~~~~~
+
+Maximum limit of skip_data_bytes is 128 bytes and number of bytes should be multiple of 8.

diff --git a/drivers/net/thunderx/base/nicvf_hw.c b/drivers/net/thunderx/base/nicvf_hw.c
index ea8092c..b07a293 100644 (file)
--- a/drivers/net/thunderx/base/nicvf_hw.c
+++ b/drivers/net/thunderx/base/nicvf_hw.c
@@ -702,6 +702,18 @@ nicvf_vlan_hw_strip(struct nicvf *nic, bool enable)
        nicvf_reg_write(nic, NIC_VNIC_RQ_GEN_CFG, val);
 }
 
+void
+nicvf_first_skip_config(struct nicvf *nic, uint8_t num_dwords)
+{
+       uint64_t val;
+
+       val = nicvf_reg_read(nic, NIC_VNIC_RQ_GEN_CFG);
+       val &= ~(0xfULL);
+       val |= (num_dwords & 0xf);
+
+       nicvf_reg_write(nic, NIC_VNIC_RQ_GEN_CFG, val);
+}
+
 void
 nicvf_apad_config(struct nicvf *nic, bool enable)
 {

diff --git a/drivers/net/thunderx/base/nicvf_hw.h b/drivers/net/thunderx/base/nicvf_hw.h
index 284d0bd..fd13ea8 100644 (file)
--- a/drivers/net/thunderx/base/nicvf_hw.h
+++ b/drivers/net/thunderx/base/nicvf_hw.h
@@ -193,6 +193,7 @@ uint32_t nicvf_qsize_sq_roundup(uint32_t val);
 void nicvf_vlan_hw_strip(struct nicvf *nic, bool enable);
 
 void nicvf_apad_config(struct nicvf *nic, bool enable);
+void nicvf_first_skip_config(struct nicvf *nic, uint8_t dwords);
 
 int nicvf_rss_config(struct nicvf *nic, uint32_t  qcnt, uint64_t cfg);
 int nicvf_rss_term(struct nicvf *nic);

diff --git a/drivers/net/thunderx/nicvf_ethdev.c b/drivers/net/thunderx/nicvf_ethdev.c
index 99fcd51..07e6a4d 100644 (file)
--- a/drivers/net/thunderx/nicvf_ethdev.c
+++ b/drivers/net/thunderx/nicvf_ethdev.c
@@ -34,6 +34,8 @@
 #include <rte_pci.h>
 #include <rte_bus_pci.h>
 #include <rte_tailq.h>
+#include <rte_devargs.h>
+#include <rte_kvargs.h>
 
 #include "base/nicvf_plat.h"
 
@@ -1230,6 +1232,7 @@ nicvf_rxq_mbuf_setup(struct nicvf_rxq *rxq)
 {
        uintptr_t p;
        struct rte_mbuf mb_def;
+       struct nicvf *nic = rxq->nic;
 
        RTE_BUILD_BUG_ON(sizeof(union mbuf_initializer) != 8);
        RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, data_off) % 8 != 0);
@@ -1240,7 +1243,7 @@ nicvf_rxq_mbuf_setup(struct nicvf_rxq *rxq)
        RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, port) -
                                offsetof(struct rte_mbuf, data_off) != 6);
        mb_def.nb_segs = 1;
-       mb_def.data_off = RTE_PKTMBUF_HEADROOM;
+       mb_def.data_off = RTE_PKTMBUF_HEADROOM + (nic->skip_bytes);
        mb_def.port = rxq->port_id;
        rte_mbuf_refcnt_set(&mb_def, 1);
 
@@ -1260,9 +1263,19 @@ nicvf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
        struct nicvf_rxq *rxq;
        struct nicvf *nic = nicvf_pmd_priv(dev);
        uint64_t offloads;
+       uint32_t buffsz;
+       struct rte_pktmbuf_pool_private *mbp_priv;
 
        PMD_INIT_FUNC_TRACE();
 
+       /* First skip check */
+       mbp_priv = rte_mempool_get_priv(mp);
+       buffsz = mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM;
+       if (buffsz < (uint32_t)(nic->skip_bytes)) {
+               PMD_INIT_LOG(ERR, "First skip is more than configured buffer size");
+               return -EINVAL;
+       }
+
        if (qidx >= MAX_RCV_QUEUES_PER_QS)
                nic = nic->snicvf[qidx / MAX_RCV_QUEUES_PER_QS - 1];
 
@@ -1298,6 +1311,7 @@ nicvf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
                return -EINVAL;
        }
 
+
        /* Check rx_free_thresh upper bound */
        rx_free_thresh = (uint16_t)((rx_conf->rx_free_thresh) ?
                                rx_conf->rx_free_thresh :
@@ -1498,6 +1512,7 @@ nicvf_vf_start(struct rte_eth_dev *dev, struct nicvf *nic, uint32_t rbdrsz)
                        return -EINVAL;
                }
                rxq->mbuf_phys_off -= data_off;
+               rxq->mbuf_phys_off -= nic->skip_bytes;
 
                if (mbuf_phys_off == 0)
                        mbuf_phys_off = rxq->mbuf_phys_off;
@@ -1978,6 +1993,59 @@ static const struct eth_dev_ops nicvf_eth_dev_ops = {
        .get_reg                  = nicvf_dev_get_regs,
 };
 
+static inline int
+nicvf_set_first_skip(struct rte_eth_dev *dev)
+{
+       int bytes_to_skip = 0;
+       int ret = 0;
+       unsigned int i;
+       struct rte_kvargs *kvlist;
+       static const char *const skip[] = {
+               SKIP_DATA_BYTES,
+               NULL};
+       struct nicvf *nic = nicvf_pmd_priv(dev);
+
+       if (!dev->device->devargs) {
+               nicvf_first_skip_config(nic, 0);
+               return ret;
+       }
+
+       kvlist = rte_kvargs_parse(dev->device->devargs->args, skip);
+       if (!kvlist)
+               return -EINVAL;
+
+       if (kvlist->count == 0)
+               goto exit;
+
+       for (i = 0; i != kvlist->count; ++i) {
+               const struct rte_kvargs_pair *pair = &kvlist->pairs[i];
+
+               if (!strcmp(pair->key, SKIP_DATA_BYTES))
+                       bytes_to_skip = atoi(pair->value);
+       }
+
+       /*128 bytes amounts to one cache line*/
+       if (bytes_to_skip >= 0 && bytes_to_skip < 128) {
+               if (!(bytes_to_skip % 8)) {
+                       nicvf_first_skip_config(nic, (bytes_to_skip / 8));
+                       nic->skip_bytes = bytes_to_skip;
+                       goto kvlist_free;
+               } else {
+                       PMD_INIT_LOG(ERR, "skip_data_bytes should be multiple of 8");
+                       ret = -EINVAL;
+                       goto exit;
+               }
+       } else {
+               PMD_INIT_LOG(ERR, "skip_data_bytes should be less than 128");
+               ret = -EINVAL;
+               goto exit;
+       }
+exit:
+       nicvf_first_skip_config(nic, 0);
+kvlist_free:
+       rte_kvargs_free(kvlist);
+       return ret;
+}
 static int
 nicvf_eth_dev_init(struct rte_eth_dev *eth_dev)
 {
@@ -2087,6 +2155,11 @@ nicvf_eth_dev_init(struct rte_eth_dev *eth_dev)
                goto malloc_fail;
        }
 
+       ret = nicvf_set_first_skip(eth_dev);
+       if (ret) {
+               PMD_INIT_LOG(ERR, "Failed to configure first skip");
+               goto malloc_fail;
+       }
        PMD_INIT_LOG(INFO, "Port %d (%x:%x) mac=%02x:%02x:%02x:%02x:%02x:%02x",
                eth_dev->data->port_id, nic->vendor_id, nic->device_id,
                nic->mac_addr[0], nic->mac_addr[1], nic->mac_addr[2],
@@ -2159,3 +2232,4 @@ static struct rte_pci_driver rte_nicvf_pmd = {
 RTE_PMD_REGISTER_PCI(net_thunderx, rte_nicvf_pmd);
 RTE_PMD_REGISTER_PCI_TABLE(net_thunderx, pci_id_nicvf_map);
 RTE_PMD_REGISTER_KMOD_DEP(net_thunderx, "* igb_uio | uio_pci_generic | vfio-pci");
+RTE_PMD_REGISTER_PARAM_STRING(net_thunderx, SKIP_DATA_BYTES "=<int>");

diff --git a/drivers/net/thunderx/nicvf_ethdev.h b/drivers/net/thunderx/nicvf_ethdev.h
index ea8dccd..9af5088 100644 (file)
--- a/drivers/net/thunderx/nicvf_ethdev.h
+++ b/drivers/net/thunderx/nicvf_ethdev.h
@@ -51,6 +51,7 @@
 
 #define VLAN_TAG_SIZE                   4      /* 802.3ac tag */
 
+#define SKIP_DATA_BYTES "skip_data_bytes"
 static inline struct nicvf *
 nicvf_pmd_priv(struct rte_eth_dev *eth_dev)
 {

diff --git a/drivers/net/thunderx/nicvf_struct.h b/drivers/net/thunderx/nicvf_struct.h
index d4a83c3..cf98f7c 100644 (file)
--- a/drivers/net/thunderx/nicvf_struct.h
+++ b/drivers/net/thunderx/nicvf_struct.h
@@ -99,6 +99,7 @@ struct nicvf {
        struct rte_intr_handle intr_handle;
        uint8_t cpi_alg;
        uint16_t mtu;
+       int skip_bytes;
        bool vlan_filter_en;
        uint8_t mac_addr[ETHER_ADDR_LEN];
        /* secondary queue set support */