/* Pattern tunnel Layer bits. */
#define MLX5_FLOW_LAYER_VXLAN (1u << 12)
+#define MLX5_FLOW_LAYER_VXLAN_GPE (1u << 13)
/* Outer Masks. */
#define MLX5_FLOW_LAYER_OUTER_L3 \
MLX5_FLOW_LAYER_OUTER_L4)
/* Tunnel Masks. */
-#define MLX5_FLOW_LAYER_TUNNEL MLX5_FLOW_LAYER_VXLAN
+#define MLX5_FLOW_LAYER_TUNNEL \
+ (MLX5_FLOW_LAYER_VXLAN | MLX5_FLOW_LAYER_VXLAN_GPE)
/* Inner Masks. */
#define MLX5_FLOW_LAYER_INNER_L3 \
MLX5_EXPANSION_OUTER_IPV6_UDP,
MLX5_EXPANSION_OUTER_IPV6_TCP,
MLX5_EXPANSION_VXLAN,
+ MLX5_EXPANSION_VXLAN_GPE,
MLX5_EXPANSION_ETH,
MLX5_EXPANSION_IPV4,
MLX5_EXPANSION_IPV4_UDP,
ETH_RSS_NONFRAG_IPV4_OTHER,
},
[MLX5_EXPANSION_OUTER_IPV4_UDP] = {
- .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN),
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
+ MLX5_EXPANSION_VXLAN_GPE),
.type = RTE_FLOW_ITEM_TYPE_UDP,
.rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
},
ETH_RSS_NONFRAG_IPV6_OTHER,
},
[MLX5_EXPANSION_OUTER_IPV6_UDP] = {
- .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN),
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
+ MLX5_EXPANSION_VXLAN_GPE),
.type = RTE_FLOW_ITEM_TYPE_UDP,
.rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
},
.next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH),
.type = RTE_FLOW_ITEM_TYPE_VXLAN,
},
+ [MLX5_EXPANSION_VXLAN_GPE] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
+ MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_VXLAN_GPE,
+ },
[MLX5_EXPANSION_ETH] = {
.next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
MLX5_EXPANSION_IPV6),
struct mlx5_flow_verbs *cur_verbs;
/**< Current Verbs flow structure being filled. */
struct rte_flow_action_rss rss;/**< RSS context. */
- uint32_t tunnel_ptype;
- /**< Store tunnel packet type data to store in Rx queue. */
uint8_t key[MLX5_RSS_HASH_KEY_LEN]; /**< RSS hash key. */
uint16_t (*queue)[]; /**< Destination queues to redirect traffic to. */
};
{ 9, 10, 11 }, { 12, 13, 14 },
};
+/* Tunnel information. */
+struct mlx5_flow_tunnel_info {
+ uint32_t tunnel; /**< Tunnel bit (see MLX5_FLOW_*). */
+ uint32_t ptype; /**< Tunnel Ptype (see RTE_PTYPE_*). */
+};
+
+static struct mlx5_flow_tunnel_info tunnels_info[] = {
+ {
+ .tunnel = MLX5_FLOW_LAYER_VXLAN,
+ .ptype = RTE_PTYPE_TUNNEL_VXLAN | RTE_PTYPE_L4_UDP,
+ },
+ {
+ .tunnel = MLX5_FLOW_LAYER_VXLAN_GPE,
+ .ptype = RTE_PTYPE_TUNNEL_VXLAN_GPE | RTE_PTYPE_L4_UDP,
+ },
+};
+
/**
* Discover the maximum number of priority available.
*
flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
}
flow->layers |= MLX5_FLOW_LAYER_VXLAN;
- flow->tunnel_ptype = RTE_PTYPE_TUNNEL_VXLAN | RTE_PTYPE_L4_UDP;
+ return size;
+}
+
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_vxlan_gpe(struct rte_eth_dev *dev,
+ const struct rte_flow_item *item,
+ struct rte_flow *flow, const size_t flow_size,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vxlan_gpe *spec = item->spec;
+ const struct rte_flow_item_vxlan_gpe *mask = item->mask;
+ unsigned int size = sizeof(struct ibv_flow_spec_tunnel);
+ struct ibv_flow_spec_tunnel vxlan_gpe = {
+ .type = IBV_FLOW_SPEC_VXLAN_TUNNEL,
+ .size = size,
+ };
+ int ret;
+ union vni {
+ uint32_t vlan_id;
+ uint8_t vni[4];
+ } id = { .vlan_id = 0, };
+
+ if (!((struct priv *)dev->data->dev_private)->config.l3_vxlan_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L3 VXLAN is not enabled by device"
+ " parameter and/or not configured in"
+ " firmware");
+ if (flow->layers & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "a tunnel is already present");
+ /*
+ * Verify only UDPv4 is present as defined in
+ * https://tools.ietf.org/html/rfc7348
+ */
+ if (!(flow->layers & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_vxlan_gpe_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_vxlan_gpe_mask,
+ sizeof(struct rte_flow_item_vxlan_gpe), error);
+ if (ret < 0)
+ return ret;
+ if (spec) {
+ memcpy(&id.vni[1], spec->vni, 3);
+ vxlan_gpe.val.tunnel_id = id.vlan_id;
+ memcpy(&id.vni[1], mask->vni, 3);
+ vxlan_gpe.mask.tunnel_id = id.vlan_id;
+ if (spec->protocol)
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VxLAN-GPE protocol not supported");
+ /* Remove unwanted bits from values. */
+ vxlan_gpe.val.tunnel_id &= vxlan_gpe.mask.tunnel_id;
+ }
+ /*
+ * Tunnel id 0 is equivalent as not adding a VXLAN layer, if only this
+ * layer is defined in the Verbs specification it is interpreted as
+ * wildcard and all packets will match this rule, if it follows a full
+ * stack layer (ex: eth / ipv4 / udp), all packets matching the layers
+ * before will also match this rule. To avoid such situation, VNI 0
+ * is currently refused.
+ */
+ if (!vxlan_gpe.val.tunnel_id)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VXLAN-GPE vni cannot be 0");
+ if (!(flow->layers & MLX5_FLOW_LAYER_OUTER))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VXLAN-GPE tunnel must be fully"
+ " defined");
+ if (size <= flow_size) {
+ mlx5_flow_spec_verbs_add(flow, &vxlan_gpe, size);
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
+ }
+ flow->layers |= MLX5_FLOW_LAYER_VXLAN_GPE;
return size;
}
* On error, a negative errno value is returned and rte_errno is set.
*/
static int
-mlx5_flow_items(const struct rte_flow_item pattern[],
+mlx5_flow_items(struct rte_eth_dev *dev,
+ const struct rte_flow_item pattern[],
struct rte_flow *flow, const size_t flow_size,
struct rte_flow_error *error)
{
ret = mlx5_flow_item_vxlan(pattern, flow, remain,
error);
break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ ret = mlx5_flow_item_vxlan_gpe(dev, pattern, flow,
+ remain, error);
+ break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
}
}
ret = mlx5_flow_items
- ((const struct rte_flow_item *)
+ (dev,
+ (const struct rte_flow_item *)
&buf->entry[i].pattern[expanded_pattern_idx],
flow,
(size < flow_size) ? flow_size - size : 0, error);
return size;
}
+/**
+ * Lookup and set the ptype in the data Rx part. A single Ptype can be used,
+ * if several tunnel rules are used on this queue, the tunnel ptype will be
+ * cleared.
+ *
+ * @param rxq_ctrl
+ * Rx queue to update.
+ */
+static void
+mlx5_flow_rxq_tunnel_ptype_update(struct mlx5_rxq_ctrl *rxq_ctrl)
+{
+ unsigned int i;
+ uint32_t tunnel_ptype = 0;
+
+ /* Look up for the ptype to use. */
+ for (i = 0; i != MLX5_FLOW_TUNNEL; ++i) {
+ if (!rxq_ctrl->flow_tunnels_n[i])
+ continue;
+ if (!tunnel_ptype) {
+ tunnel_ptype = tunnels_info[i].ptype;
+ } else {
+ tunnel_ptype = 0;
+ break;
+ }
+ }
+ rxq_ctrl->rxq.tunnel = tunnel_ptype;
+}
+
/**
* Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) according to the flow.
*
rxq_ctrl->flow_mark_n++;
}
if (tunnel) {
- rxq_ctrl->rxq.tunnel = flow->tunnel_ptype;
- rxq_ctrl->flow_vxlan_n++;
+ unsigned int j;
+
+ /* Increase the counter matching the flow. */
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
+ if ((tunnels_info[j].tunnel & flow->layers) ==
+ tunnels_info[j].tunnel) {
+ rxq_ctrl->flow_tunnels_n[j]++;
+ break;
+ }
+ }
+ mlx5_flow_rxq_tunnel_ptype_update(rxq_ctrl);
}
}
}
rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
}
if (tunnel) {
- rxq_ctrl->flow_vxlan_n++;
- if (!rxq_ctrl->flow_vxlan_n)
- rxq_ctrl->rxq.tunnel = 0;
+ unsigned int j;
+
+ /* Decrease the counter matching the flow. */
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
+ if ((tunnels_info[j].tunnel & flow->layers) ==
+ tunnels_info[j].tunnel) {
+ rxq_ctrl->flow_tunnels_n[j]--;
+ break;
+ }
+ }
+ mlx5_flow_rxq_tunnel_ptype_update(rxq_ctrl);
}
}
}
for (idx = 0, i = 0; idx != priv->rxqs_n; ++i) {
struct mlx5_rxq_ctrl *rxq_ctrl;
+ unsigned int j;
if (!(*priv->rxqs)[idx])
continue;
struct mlx5_rxq_ctrl, rxq);
rxq_ctrl->flow_mark_n = 0;
rxq_ctrl->rxq.mark = 0;
- rxq_ctrl->flow_vxlan_n = 0;
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j)
+ rxq_ctrl->flow_tunnels_n[j] = 0;
rxq_ctrl->rxq.tunnel = 0;
++idx;
}
git.droids-corp.org / dpdk.git / commitdiff