dpdk.git
6 years agodoc: add tested platforms with Mellanox NICs
Raslan Darawsheh [Wed, 23 May 2018 11:54:36 +0000 (14:54 +0300)]
doc: add tested platforms with Mellanox NICs

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
6 years agodoc: add tested Intel platforms with Intel NICs
Yulong Pei [Tue, 22 May 2018 09:34:56 +0000 (17:34 +0800)]
doc: add tested Intel platforms with Intel NICs

Add tested Intel platforms with Intel NICs to the release note.

Signed-off-by: Yulong Pei <yulong.pei@intel.com>
6 years agoversion: 18.05-rc5
Thomas Monjalon [Tue, 22 May 2018 23:44:00 +0000 (01:44 +0200)]
version: 18.05-rc5

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
6 years agonet/tap: fix vdev data sharing for tun
Vipin Varghese [Tue, 22 May 2018 11:01:54 +0000 (16:31 +0530)]
net/tap: fix vdev data sharing for tun

Enables TUN PMD sharing by attaching the port from the shared data.

Fixes: ee27edbe0c10 ("drivers/net: share vdev data to secondary process")

Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
6 years agonet/tap: fix protocol field
Vipin Varghese [Tue, 22 May 2018 10:47:14 +0000 (16:17 +0530)]
net/tap: fix protocol field

The TX function is shared between TAP and TUN PMD. Checking TUN-TAP
type field will ensure the TAP PMD will always have protocol field
as 0.

Fixes: 204d026a3922 ("net/tap: support tun")

Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agodoc: update release notes for mlx drivers
Shahaf Shuler [Thu, 17 May 2018 07:48:34 +0000 (10:48 +0300)]
doc: update release notes for mlx drivers

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
6 years agonet/liquidio: fix link state fetching during start
Chuhong Yao [Tue, 22 May 2018 14:33:29 +0000 (22:33 +0800)]
net/liquidio: fix link state fetching during start

Clear link state information during device start for fetching new state
before function completion.

Fixes: 605164c8e79d ("net/liquidio: add API to validate VF MTU")
Cc: stable@dpdk.org
Signed-off-by: Chuhong Yao <ych@panath.cn>
Acked-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
6 years agonet/bnxt: fix Rx checksum flags
Ajit Khaparde [Tue, 22 May 2018 18:13:47 +0000 (11:13 -0700)]
net/bnxt: fix Rx checksum flags

For frames where the hardware is not able to calculate checksum
we are indicating such frames to be bad. And that is incorrect.
Indicate PKT_RX_IP_CKSUM_UNKNOWN or PKT_RX_L4_CKSUM_UNKNOWN
for such frames.

Fixes: 7ec39d8c524b ("net/bnxt: update status of Rx IP/L4 CKSUM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
6 years agonet/bnxt: fix xstats for VF
Ajit Khaparde [Tue, 22 May 2018 18:13:46 +0000 (11:13 -0700)]
net/bnxt: fix xstats for VF

Query of port stats is permitted for VF interfaces as well.
Fix the code to allow VFs to query port stats.

Fixes: bfb9c2260be2 ("net/bnxt: support xstats get/reset")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
6 years agonet/bnxt: fix VF resource allocation
Ajit Khaparde [Tue, 22 May 2018 18:13:45 +0000 (11:13 -0700)]
net/bnxt: fix VF resource allocation

If the resource requirement of a VF is more than what is allotted
to it by the FW, a VF can request to reallocate some of the resources.

This is possible only when the NIC is running the Resource Manager aware
CHiMP FW.

If necessary, calculate Tx and Rx ring count using the new RM API.
Otherwise use the Tx and Rx ring count as-is. Update the cp ring count
based on the Tx and Rx ring count.

Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")

Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
6 years agonet/bnxt: use first completion ring for fwd and async event
Ajit Khaparde [Tue, 22 May 2018 18:13:44 +0000 (11:13 -0700)]
net/bnxt: use first completion ring for fwd and async event

In order to save completion resource, use the first completion ring from
PF or VF as the default completion ring for async event & HWRM forward
response handling. Add bnxt_hwrm_set_async_event_cr() to set
async_event_cr for either PF or VF.

Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")

Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
6 years agonet/bnxt: fix RSS hash configuration
Ajit Khaparde [Tue, 22 May 2018 18:13:43 +0000 (11:13 -0700)]
net/bnxt: fix RSS hash configuration

While configuring RSS, the FW needs to know the rss_hash_mode that needs
to be initialized.
Set hash mode to HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT
to allow the FW to use the global mode already configured in the device.

Fixes: bcd4bcc4426f ("net/bnxt: configure RSS")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
6 years agonet/bnxt: fix Tx and Rx burst for secondary process
Ajit Khaparde [Tue, 22 May 2018 18:13:42 +0000 (11:13 -0700)]
net/bnxt: fix Tx and Rx burst for secondary process

We were initializing Tx and Rx burst functions only for primary
processes. Fixing it in this patch.

Fixes: 88920136688c ("net/bnxt: support xstats get by id")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
6 years agonet/bnxt: add fallthrough comment
Ajit Khaparde [Tue, 22 May 2018 18:13:41 +0000 (11:13 -0700)]
net/bnxt: add fallthrough comment

The FALLTHROUGH comment for cascading switch cases was missing in
a few places. This patch adds that.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
6 years agoapp/testpmd: fix descriptor number for Rx queue setup
Ferruh Yigit [Tue, 22 May 2018 16:37:20 +0000 (17:37 +0100)]
app/testpmd: fix descriptor number for Rx queue setup

Wrong index used to select descriptor number, causing setting up queue
with wrong number of descriptors.

Fixes: d44f8a485f5d ("app/testpmd: enable per queue configure")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
6 years agoapp/testpmd: fix log of start command
Bernard Iremonger [Tue, 22 May 2018 15:10:38 +0000 (16:10 +0100)]
app/testpmd: fix log of start command

Application can provide 0 for ring size to use default values. To not
log zero for that case get configured ring size from device.

Call the rte_eth_rxq_info_get() and rte_eth_txq_info_get() functions
to update the number of rx and tx descriptors.

Fixes: d44f8a485f5d ("app/testpmd: enable per queue configure")

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agonet/mlx5: remove redundant checks
Yongseok Koh [Tue, 22 May 2018 08:59:43 +0000 (01:59 -0700)]
net/mlx5: remove redundant checks

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Xueming Li <xuemingl@mellanox.com>
6 years agonet/mlx5: fix setting offsets for SW parser
Yongseok Koh [Tue, 22 May 2018 08:59:42 +0000 (01:59 -0700)]
net/mlx5: fix setting offsets for SW parser

Since ConnectX-5, SW parser just complements HW parser. SW parser starts to
engage only if HW parser can't reach a header. For the older devices, HW
parser will not kick in if any of SWP offsets is set. Therefore, all of the
L3 offsets should be set regardless of HW offload. As IPv6 doesn't have
header checksum, the mbuf can't have PKT_TX_[OUTER_]IP_CKSUM if outer or
inner L3 is IPv6.

And if inner packet isn't IP, the inner offsets shouldn't be set.

Fixes: 5f8ba81c4228 ("net/mlx5: support generic tunnel offloading")

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Xueming Li <xuemingl@mellanox.com>
6 years agonet/ixgbe: remove unnecessary macro
Qi Zhang [Tue, 22 May 2018 14:12:47 +0000 (22:12 +0800)]
net/ixgbe: remove unnecessary macro

Since we move to new offload APIs, IXGBE_SIMPLE_FLAGS is not used.

Fixes: 51215925a32f ("net/ixgbe: convert to new Tx offloads API")

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agonet/failsafe: fix duplicate event registration
Matan Azrad [Tue, 22 May 2018 12:38:47 +0000 (12:38 +0000)]
net/failsafe: fix duplicate event registration

When the fail-safe device is reconfigured, it attempts to register
again for the sub-devices LSC and RMV events.

Prevent an event registration if it is already done.

Fixes: 598fb8aec6f6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
6 years agonet/failsafe: fix removed sub-device cleanup
Matan Azrad [Tue, 22 May 2018 12:38:46 +0000 (12:38 +0000)]
net/failsafe: fix removed sub-device cleanup

The fail-safe PMD registers to RMV event for each removable sub-device
port in order to cleanup the sub-device resources and switch the Tx
sub-device directly when it is plugged-out.

During removal time, the fail-safe PMD stops and closes the sub-device
but it doesn't unregister the LSC and RMV callbacks of the sub-device
port.

It can lead the callbacks to be called for a port which is no more
associated with the fail-safe sub-device, because there is not a
guarantee that a sub-device gets the same port ID for each plug-in
process. This port, for example, may belong to another sub-device of a
different fail-safe device.

Unregister the LSC and RMV callbacks for sub-devices which are not
used.

Fixes: 598fb8aec6f6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
6 years agonet/vhost: convert to new Rx/Tx offload API
Maxime Coquelin [Tue, 22 May 2018 12:50:19 +0000 (14:50 +0200)]
net/vhost: convert to new Rx/Tx offload API

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
6 years agonet/mlx4: refactor RSS conversion functions
Adrien Mazarguil [Mon, 21 May 2018 15:50:12 +0000 (17:50 +0200)]
net/mlx4: refactor RSS conversion functions

Since commit 97b2217ae5bc ("net/mlx4: advertise supported RSS hash
functions"), this PMD includes two similar-looking functions that convert
RSS hash fields between Verbs and DPDK formats.

This patch refactors them as a single two-way function and gets rid of
redundant helper macros.

Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/mlx4: fix default in RSS converter
Adrien Mazarguil [Mon, 21 May 2018 15:50:09 +0000 (17:50 +0200)]
net/mlx4: fix default in RSS converter

Below commit documents 0 as a value standing for a default set of RSS hash
types, however the mlx4 PMD doesn't interpret it correctly and still uses
its own internal special value for that (-1).

Also, its function prototype was not updated.

Fixes: ac8d22de2394 ("ethdev: flatten RSS configuration in flow API")
Fixes: 1d173da83ef2 ("net/mlx4: fix default RSS hash fields")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/i40e: remove dependency on old Rx flags
Qi Zhang [Tue, 22 May 2018 01:01:20 +0000 (09:01 +0800)]
net/i40e: remove dependency on old Rx flags

Cleanup remain dependency on old rxmode flags since we move to
new offload APIs.

Fixes: c3ac7c5b0b8a ("net/i40e: convert to new Rx offloads API")
Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
6 years agonet/bonding: export mode 4 slave info routine
Chas Williams [Thu, 17 May 2018 23:22:51 +0000 (19:22 -0400)]
net/bonding: export mode 4 slave info routine

rte_eth_bond_8023ad_slave_info() wasn't exported in the original work.
Useful to extract information about the current 802.3ad state.

Fixes: 46fb43683679 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agonet/vdev_netvsc: fix automatic probing
Matan Azrad [Mon, 21 May 2018 16:23:30 +0000 (16:23 +0000)]
net/vdev_netvsc: fix automatic probing

The vdev_netvsc driver allows an automatic probe in Hyper-V VM systems
unless it was already specified by the EAL command line.

The detection of a specified NetVSC device is wrongly done by comparing
the vdev_netvsc driver name to all the vdev devices names, including
the suffix device index. Thus, if the user specifies the vdev_netvsc
device by adding an index to the device name, the comparison fails.
Consequently, the vdev_netvsc driver may automatically probe NetVSC
devices, despite the NetVSC device that was specified by the EAL command
line.

Compare the vdev_netvsc driver name to the devices names without the
index.

Fixes: 56252de779a6 ("net/vdev_netvsc: add automatic probing")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
6 years agonet/ark: fix call to probing finish function for first port
Ed Czeck [Mon, 21 May 2018 19:29:07 +0000 (15:29 -0400)]
net/ark: fix call to probing finish function for first port

Fixes: fbe90cdd776c ("ethdev: add probing finish function")

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Acked-by: John Miller <john.miller@atomicrules.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
6 years agonet/i40e: fix shifts of signed values
Ferruh Yigit [Mon, 21 May 2018 14:45:59 +0000 (15:45 +0100)]
net/i40e: fix shifts of signed values

Following error reported by cppcheck:
(error) Shifting signed 32-bit value by 31 bits is
undefined behaviour. The patch fixes it.

Fixes: 8db9e2a1b232 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agonet/e1000: fix build of igb only
Harry van Haaren [Mon, 21 May 2018 09:31:41 +0000 (10:31 +0100)]
net/e1000: fix build of igb only

This commit fixes a compilation error if EM_PMD is
not defined, bug IGB_PMD is. The root cause of the
issue was that log init variables are declared as
extern in a header file, while the definition of the
variables was in e1000_ethdev.c. Hence, the definitions
were not available if the e1000 PMD is disabled.

To fix this, a new file is added e1000_logs.c, which
matches the e1000_logs.h header. The log variables are
always compiled in, but the PMD logs are only registered
if a PMD is enabled in the configuration. Extra checks
are added in order to avoid duplicate registering.

Fixes: ed5bbb767c3e ("net/e1000: implement dynamic logging")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
6 years agonet/mlx5: fix count in xstats
David Marchand [Sun, 20 May 2018 08:13:58 +0000 (10:13 +0200)]
net/mlx5: fix count in xstats

With the commit af4f09f28294 ("net/mlx5: prefix all functions with mlx5"),
mlx5_xstats_get() is not compliant any longer with the api.
It always returns the caller max entries count while it should return how
many entries it wrote/wanted to write.

Fixes: af4f09f28294 ("net/mlx5: prefix all functions with mlx5")

Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
6 years agoethdev: update description of port name
Vipin Varghese [Fri, 18 May 2018 05:12:53 +0000 (10:42 +0530)]
ethdev: update description of port name

Change adds extra information on name parameter for API
rte_eth_dev_get_name_by_port and rte_eth_dev_get_port_by_name.

Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agonet/tap: fix device removal when no queue exist
Ophir Munk [Mon, 21 May 2018 07:54:33 +0000 (07:54 +0000)]
net/tap: fix device removal when no queue exist

TAP device is created following its first queue creation. Multiple
queues can be added or removed over time. In Linux terminology those
are file descriptors which are opened or closed over time. As long as
the number of opened file descriptors is positive - TAP device will
appear as a Linux device. In case all queues are released (the
equivalent of all file descriptors being closed) the TAP device will
be removed. This can lead to abnormalities in different scenarios
where the TAP device should exist even if all its queues are released.
In order to make TAP existence independent of its number of queues -
an extra file descriptor is opened on TAP creation and is closed on
TAP closure. Its only purpose is to serve as a keep-alive mechanism
for the TAP device.

Fixes: bf7b7f437b49 ("net/tap: create netdevice during probing")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
6 years agoethdev: fix shallow copy of flow API RAW item
Adrien Mazarguil [Mon, 21 May 2018 11:44:28 +0000 (13:44 +0200)]
ethdev: fix shallow copy of flow API RAW item

Like original commit mentioned below, this fix synchronizes flow rule copy
function with testpmd's own implementation following "app/testpmd: fix copy
of raw flow item (revisited)".

It addresses a crash that occurs when feeding a RAW pattern item to
rte_flow_copy(). Besides external applications, two PMDs (bonding and
failsafe) rely on this function internally.

Note the scope of this patch is limited to the RAW pattern item and has no
impact on all others.

Fixes: 972bf3610611 ("ethdev: fix shallow copy of flow API RSS action")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agoapp/testpmd: fix copy of raw flow item - revisited
Adrien Mazarguil [Mon, 21 May 2018 11:44:26 +0000 (13:44 +0200)]
app/testpmd: fix copy of raw flow item - revisited

While previous fix with the same title does address the main issue, root
cause is that proper handling of spec/last/mask was overlooked in the
original patch.

Mask and last fields must be taken into account at all times.

Fixes: d0ad8648b1c5 ("app/testpmd: fix RSS flow action configuration")
Fixes: 67af7ecc52ec ("app/testpmd: fix copy of raw flow item")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agonet/cxgbevf: fix inter-VM traffic when physical link down
Shagun Agrawal [Mon, 21 May 2018 08:05:07 +0000 (13:35 +0530)]
net/cxgbevf: fix inter-VM traffic when physical link down

Add force_link_up devargs to always force link as up for VFs.
This enables VFs on the same NIC to send traffic to each other
even when physical link is down.

Also add RTE_PMD_REGISTER_PARAM_STRING to export all supported
devargs.

Fixes: 011ebc236ddc ("net/cxgbe: add skeleton VF driver")

Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
6 years agonet/i40e: fix corruption of VF stats
Remy Horton [Fri, 18 May 2018 11:49:48 +0000 (12:49 +0100)]
net/i40e: fix corruption of VF stats

The resetting of stats on a VF involves the setting of an offset
that is subtracted from future calls, rather zeroing of counters.
However doing a stats reset on the port representor was also
adjusting the values forwarded to the VF, which had the effect of
corrupting the VF's counters. The fix is for the port representor
to maintain its own stats offset, so the port representor and VF
maintain independently-resettable counters.

Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")

Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agonet/ixgbe: fix config VLAN strip on the fly
Wei Dai [Sat, 19 May 2018 10:11:19 +0000 (18:11 +0800)]
net/ixgbe: fix config VLAN strip on the fly

The old ixgbe_vlan_offload_set() is called by
rte_eth_dev_set_vlan_offload() which is meant to config VLAN
strip/filter/extend on all queues.
This old function is also called by rte_eth_dev_start()/ixgbe_dev_start()
which need support per-queue VALN strip on only parts of queues.

So add new function ixgbe_vlan_offload_config() =
old ixgbe_vlan_offload_set().
This new function is called by ixgbe_dev_start() to support VLAN strip
per-queue configuration.

New ixgbe_vlan_offload_set() = codes to align VLAN strip flags on all
queues with port level setting + new ixgbe_vlan_offload_configure().
The 2nd function is called by rte_eth_dev_set_vlan_offload to support
configure VLAN strip on all queues of whole port.

Fixes: 216f78f4d53f ("net/ixgbe: support VLAN strip per queue offloading in PF")
Fixes: 860a94d3c692 ("net/ixgbe: support VLAN strip per queue offloading in VF")

Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
6 years agonet/qede: fix unicast filter routine return code
Shahed Shaikh [Sun, 20 May 2018 00:15:46 +0000 (17:15 -0700)]
net/qede: fix unicast filter routine return code

There is no need to return failure (-EEXIST) when the requested
filter is already configured.

Fixes: d6cb17535f88 ("net/qede: fix VLAN filters")
Fixes: 77fac1b54fc9 ("net/qede: fix filtering code")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
6 years agonet/qede/base: reduce verbosity in HW init log
Rasesh Mody [Sun, 20 May 2018 00:15:45 +0000 (17:15 -0700)]
net/qede/base: reduce verbosity in HW init log

Reduce the verbosity in ecore_pglueb_rbc_attn_handler() while logging
errmsg during HW init. This could happen due to ungraceful exit of
previous driver instance.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
6 years agonet/qede: fix missing loop index in Tx SG mode
Rasesh Mody [Sun, 20 May 2018 00:15:44 +0000 (17:15 -0700)]
net/qede: fix missing loop index in Tx SG mode

Fixes: 3d4bb4411683 ("net/qede: add fastpath support for VXLAN tunneling")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
6 years agonet/qede: fix multicast filtering
Harish Patil [Sun, 20 May 2018 00:15:43 +0000 (17:15 -0700)]
net/qede: fix multicast filtering

This patch is to fix multicast filtering using set_mc_addr_list().

Fixes: 77fac1b54fc9 ("net/qede: fix filtering code")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
6 years agonet/ixgbe: fix DCB configuration
Qiming Yang [Fri, 18 May 2018 09:51:56 +0000 (17:51 +0800)]
net/ixgbe: fix DCB configuration

This patch removes unnecessary check in ixgbe_check_mq_mode, which
fixes the DCB configuration issue.

Fixes: 27b609cbd1c6 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
6 years agoapp/testpmd: fix exit for virtio-user
Zhiyong Yang [Fri, 18 May 2018 09:59:37 +0000 (17:59 +0800)]
app/testpmd: fix exit for virtio-user

For vdev, just calling rte_eth_dev_close() isn't enough to free all
the resources allocated during device probe, e.g. for virtio-user,
virtio_user_pmd_remove(), i.e. the remove() method of a vdev driver,
needs to be called to unlink the socket file created during device
probe. So this patch calls the rte_eth_dev_detach() for vdev when
quitting testpmd.

vdevs detach on testpmd exit implemented as workaround to fix
a virtio-user issue. The issue was virtio-user cleanup is not
called and existing socket file not cleaned up which will fail
next run.

Added a comment that this workaround should be converted to a proper
cleanup, not something specific to virtio-user, and not something
specific to vdev and testpmd.

Fixes: af75078fece3 ("first public release")
Fixes: bd8f50a45d0f ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
6 years agoethdev: fix storage type of latest port id
Zhiyong Yang [Fri, 18 May 2018 10:41:10 +0000 (18:41 +0800)]
ethdev: fix storage type of latest port id

eth_dev_last_created_port is used to store port id type and should
be extended to 16bits corresponding to ethdev port id range.

Fixes: f8244c6399d9 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agodoc: fix spelling in i40e guide
Qiming Yang [Thu, 17 May 2018 13:58:01 +0000 (21:58 +0800)]
doc: fix spelling in i40e guide

This patch corrects some spelling issues in i40e.rst and clarifies
which controllers and connections are part of the 700 Series.

Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
6 years agodevtools: check Linux script path if directory
Juhamatti Kuusisaari [Thu, 19 Apr 2018 12:00:02 +0000 (15:00 +0300)]
devtools: check Linux script path if directory

Handle properly a case where the path (DPDK_PATCH_PATH
or DPDK_MAINTAINER_PATH) is set to point to a directory.

Signed-off-by: Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agodevtools: add git log checks for more acronyms
Ferruh Yigit [Fri, 27 Apr 2018 13:42:32 +0000 (14:42 +0100)]
devtools: add git log checks for more acronyms

checks added for vDPA, MSS, UDP, EEPROM

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agodoc: add note about device options for multi-process
Vipin Varghese [Fri, 11 May 2018 05:24:15 +0000 (10:54 +0530)]
doc: add note about device options for multi-process

Update information for blacklist and whitelist options for secondary
process to share same from primary process.

Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
6 years agomaintainers: add maintainer for testpmd
Bernard Iremonger [Thu, 10 May 2018 09:29:04 +0000 (10:29 +0100)]
maintainers: add maintainer for testpmd

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
6 years agomaintainers: add missing doc references
Ferruh Yigit [Tue, 22 May 2018 14:28:30 +0000 (15:28 +0100)]
maintainers: add missing doc references

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agokni: fix build on CentOS 7.4
Dan Gora [Tue, 22 May 2018 18:10:08 +0000 (15:10 -0300)]
kni: fix build on CentOS 7.4

Fix compilation errors on Centos 7.4 when CONFIG_RTE_KNI_KMOD_ETHTOOL
is set to 'y'.

Centos 7.4 needs HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL:

igb_main.c: In function ‘igb_ndo_bridge_getlink’:
igb_main.c:2289:2: error: too few arguments to function
                   ‘ndo_dflt_bridge_getlink’
  return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, nlflags);
  ^

Centos 7.4 needs HAVE_VF_VLAN_PROTO and needs to redefine
ndo_set_vf_vlan to .extended.ndo_set_vf_vlan:

igb_main.c:2318:2: error: unknown field ‘ndo_set_vf_vlan’ specified
                   in initializer
  .ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
  ^

Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agoeventdev: add note in Rx adapter API doc
Vipin Varghese [Mon, 21 May 2018 10:29:00 +0000 (15:59 +0530)]
eventdev: add note in Rx adapter API doc

rte_event_eth_rx_adapter_create allocates eth_devices for
currently available eth devices. For newly created eth
devices a new instance for rx adapter has to be created.

Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Nikhil Rao <nikhil.rao@intel.com>
6 years agoeventdev: fix resetting software timer
Dan Gora [Tue, 22 May 2018 00:14:14 +0000 (21:14 -0300)]
eventdev: fix resetting software timer

Fix the call to rte_timer_reset_sync() in sw_event_timer_cb().  The
second parameter is the number of ticks, the third is the timer type.

Fixes: 6750b21bd6af ("eventdev: add default software timer adapter")

Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
6 years agodoc: update ZUC installation section
Pablo de Lara [Tue, 22 May 2018 12:43:14 +0000 (13:43 +0100)]
doc: update ZUC installation section

Intel's libsso_zuc library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
6 years agodoc: update SNOW3G installation section
Pablo de Lara [Tue, 22 May 2018 12:43:13 +0000 (13:43 +0100)]
doc: update SNOW3G installation section

Intel's libsso_snow3g library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
6 years agodoc: update KASUMI installation section
Pablo de Lara [Tue, 22 May 2018 12:43:12 +0000 (13:43 +0100)]
doc: update KASUMI installation section

Intel's libsso_kasumi library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
6 years agocryptodev: rename functions to get session size
Pablo de Lara [Mon, 21 May 2018 13:08:41 +0000 (14:08 +0100)]
cryptodev: rename functions to get session size

rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.

With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.

The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
6 years agodoc: announce deprecation in crypto feature flags
Pablo de Lara [Mon, 21 May 2018 13:08:40 +0000 (14:08 +0100)]
doc: announce deprecation in crypto feature flags

Some feature flags, such as RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER
are ambiguous. In this case, it is not clear if Scatter Gather lists
are supported in the input buffer and/or output buffer.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
6 years agodoc: announce deprecation in crypto queue pair start/stop
Pablo de Lara [Mon, 21 May 2018 13:08:39 +0000 (14:08 +0100)]
doc: announce deprecation in crypto queue pair start/stop

Functions rte_cryptodev_queue_pair_start/stop
are not really used in any of the crypto drivers
(they all just return 0 or -ENOTSUP).
Therefore, this API can be deprecated from 18.05
and removed in 18.08.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
6 years agodoc: announce deprecation for attach/detach crypto session
Pablo de Lara [Mon, 21 May 2018 13:08:38 +0000 (14:08 +0100)]
doc: announce deprecation for attach/detach crypto session

Functions rte_cryptodev_queue_pair_attach_sym_session
and rte_cryptodev_queue_pair_detach_sym_sessions
are not really used in any of the crypto drivers
(only one driver implements it and it just return 0).
Therefore, this API can be deprecated from 18.05
and removed in 18.08.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
6 years agodoc: announce ABI change for crypto info struct
Pablo de Lara [Mon, 21 May 2018 13:08:37 +0000 (14:08 +0100)]
doc: announce ABI change for crypto info struct

Cryptodev info structure currently contains
a pointer to an rte_pci_device structure.
This field depends on a specific bus type (PCI),
which is not following a bus independent design.
Following the same approach taken in ethdev, the field
will be replaced with a pointer to an rte_device structure.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
6 years agodoc: announce ABI change for crypto sym info struct
Pablo de Lara [Mon, 21 May 2018 13:08:36 +0000 (14:08 +0100)]
doc: announce ABI change for crypto sym info struct

Since the API changes made in 17.08, the session mempool
is not created anymore in each crypto device.
Therefore, there is no need to have, in the cryptodev info
structure, the maximum number of sessions supported per device
and per queue pair.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
6 years agocompressdev: clarify mbuf offsets
Pablo de Lara [Tue, 22 May 2018 10:54:32 +0000 (11:54 +0100)]
compressdev: clarify mbuf offsets

Add extra clarification about offset in source and
destination mbuf used in compressdev, when they
are a chain of mbufs.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Shally Verma <shally.verma@caviumnetworks.com>
6 years agocryptodev: clarify when session can be cleared
Fiona Trahe [Tue, 22 May 2018 10:36:51 +0000 (11:36 +0100)]
cryptodev: clarify when session can be cleared

Session data can only be cleared once there are no
inflight operations using the session. It is the application's
responsability to make sure of this.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
6 years agocompressdev: clarify when private xform can be cleared
Fiona Trahe [Tue, 22 May 2018 10:33:30 +0000 (11:33 +0100)]
compressdev: clarify when private xform can be cleared

As the private_xform data can be shared by many operations
and across queue_pairs, it would be performance impacting
for PMDs to track inflights associated with one. It makes
more sense to push the responsibility to the application to
keep track of its usage and only delete the private_xform when
there are no more ops using it.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
6 years agocompressdev: clarify buffer size limitation
Fiona Trahe [Wed, 16 May 2018 14:18:59 +0000 (15:18 +0100)]
compressdev: clarify buffer size limitation

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
6 years agocompressdev: remove unused driver id
Pablo de Lara [Mon, 21 May 2018 22:38:43 +0000 (23:38 +0100)]
compressdev: remove unused driver id

Driver id field is not set/used anywhere,
so it should be removed from rte_compressdev structure.

Fixes: ed7dd94f7f66 ("compressdev: add basic device management")

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
6 years agocrypto/scheduler: fix 64-bit mask of workers cores
Kirill Rybalchenko [Mon, 21 May 2018 10:22:12 +0000 (11:22 +0100)]
crypto/scheduler: fix 64-bit mask of workers cores

The list of workers cores was represented by 64-bit bitmask.
It doesn't work if system has cores with id higher than 63.
This fix changes list of workers cores to array of uint16_t.
The size of array equals to RTE_MAX_LCORE.

Fixes: 4c07e0552f0a ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
6 years agodoc: clarify chained mbuf feature in crypto guide
Fiona Trahe [Thu, 3 May 2018 13:32:36 +0000 (14:32 +0100)]
doc: clarify chained mbuf feature in crypto guide

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
6 years agocryptodev: add missing security feature string
Pablo de Lara [Fri, 18 May 2018 13:23:50 +0000 (14:23 +0100)]
cryptodev: add missing security feature string

Security protocol flag string was not added
when the actual flag was added.

Fixes: eadb4fa1e1fe ("cryptodev: support security APIs")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
6 years agocryptodev: extend feature flags description
Pablo de Lara [Fri, 18 May 2018 16:40:18 +0000 (17:40 +0100)]
cryptodev: extend feature flags description

Extend the description of cryptodev feature flags,
adding extra information.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
6 years agocryptodev: fix supported size check
Pablo de Lara [Tue, 15 May 2018 19:13:13 +0000 (20:13 +0100)]
cryptodev: fix supported size check

Crypto capability structure contains supported
sizes for key, IV, digest, etc. on different algorithms.
These sizes can be expressed as a single value or
a range of values.
The check was broken when a size was checked against
a range with multiple values.

Also, for more clarity, the param_range_check macro
has been converted into a function.

Fixes: 38227c0e3ad2 ("cryptodev: retrieve device info")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
6 years agocrypto/aesni_gcm: remove unneeded cast
Pablo de Lara [Tue, 15 May 2018 20:21:02 +0000 (21:21 +0100)]
crypto/aesni_gcm: remove unneeded cast

qp->temp_digest is already an array of uint8_t,
so no need to cast to uint8_t*.

Fixes: baf1e63bfd65 ("crypto/aesni_gcm: do not append digest")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
6 years agocrypto/aesni_mb: fix capabilities
Pablo de Lara [Tue, 15 May 2018 19:15:27 +0000 (20:15 +0100)]
crypto/aesni_mb: fix capabilities

Missing AES-CMAC supported parameters
in PMD capabilities.

Fixes: 6491dbbecebb ("crypto/aesni_mb: support AES CMAC")

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
6 years agoapp/crypto-perf: fix parameters copy
Jerin Jacob [Wed, 16 May 2018 12:28:04 +0000 (17:58 +0530)]
app/crypto-perf: fix parameters copy

Since arm64 was using plain memcpy for rte_memcpy, gcc 8.1, could
detect size was more than source address range. In this case, the
source was wrong.

test/test/test_cryptodev.c: In function 'test_multi_session_random_usage':
rte_memcpy_64.h:364:29: error: 'memcpy'
forming offset [113, 184] is out of the bounds [0, 112] of object
'testsuite_params' with type 'struct crypto_testsuite_params'
[-Werror=array-bounds]
 #define rte_memcpy(d, s, n) memcpy((d), (s), (n))
                             ^~~~~~~~~~~~~~~~~~~~~
test/test/test_cryptodev.c:6618:3: note:
in expansion of macro 'rte_memcpy'
   rte_memcpy(&ut_paramz[i].ut_params, &testsuite_params,
   ^~~~~~~~~~
test/test/test_cryptodev.c:140:39: note:
'testsuite_params' declared here
 static struct crypto_testsuite_params testsuite_params = { NULL };

Fixes: ffbe3be0d4b5 ("app/test: add libcrypto")
Cc: stable@dpdk.org
Suggested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
6 years agoapp/crypto-perf: use strcpy for allocated string
Jerin Jacob [Wed, 16 May 2018 12:28:03 +0000 (17:58 +0530)]
app/crypto-perf: use strcpy for allocated string

inlined from ‘cperf_test_vector_get_from_file’ at
app/test-crypto-perf/cperf_test_vector_parsing.c:578:11:
app/test-crypto-perf/cperf_test_vector_parsing.c:510:3: error:
‘strncpy’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
   strncpy(entry, line, strlen(line));
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
app/test-crypto-perf/cperf_test_vector_parsing.c:528:5: error:
‘strncat’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
     strncat(entry, line, strlen(line));
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Found this issue with meson build and gcc 8.1.

Fixes: f8be1786b1b8 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
6 years agocrypto/scheduler: fix possible duplicated ring names
Fan Zhang [Wed, 16 May 2018 13:10:32 +0000 (14:10 +0100)]
crypto/scheduler: fix possible duplicated ring names

This patch fixes the possible duplicated ring names in multi-core
scheduler. Originally two or more multi-core schedulers may have
same worker ring names thus will cause initialization error.

Fixes: 4c07e0552f0a ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
6 years agocrypto/scheduler: fix multicore rings re-use
Kirill Rybalchenko [Wed, 16 May 2018 14:24:31 +0000 (15:24 +0100)]
crypto/scheduler: fix multicore rings re-use

When scheduler mode changed from multicore to roundrobin and
back to multicore, scheduler tries to create memory rings with
the same name and fails. The fix allows to lookup and re-use
previously allocated memory rings.

Fixes: 4c07e0552f0a ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Tested-by: Reshma Pattan <reshma.pattan@intel.com>
6 years agoapp/bbdev: fix unchecked return value
Kamil Chalupnik [Wed, 16 May 2018 13:57:14 +0000 (15:57 +0200)]
app/bbdev: fix unchecked return value

Fixing CHECKED_RETURN issue by checking values returned
by rte_bbdev_dec_op_alloc_bulk and rte_bbdev_enc_op_alloc_bulk
functions.

Coverity issue: 279447, 279456
Fixes: f714a18885a6 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
6 years agobus/ifpga: fix null pointer dereference in scan
Rosen Xu [Tue, 22 May 2018 10:26:18 +0000 (18:26 +0800)]
bus/ifpga: fix null pointer dereference in scan

Fix ifpga_scan_one() null pointer dereferences issue.

Coverity issue: 279454
Fixes: 05fa3d4a6539 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
6 years agobus/ifpga: fix memory leaks in scan
Rosen Xu [Tue, 22 May 2018 10:26:17 +0000 (18:26 +0800)]
bus/ifpga: fix memory leaks in scan

There are some resource leaks in ifpga_scan_one.
This patch fixes it.

Coverity issue: 279459
Fixes: 05fa3d4a6539 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
6 years agobus/ifpga: fix error check in unplug
Rosen Xu [Tue, 22 May 2018 10:26:16 +0000 (18:26 +0800)]
bus/ifpga: fix error check in unplug

The control variable should be afu_dev not dev.

Coverity issue: 279455
Fixes: 05fa3d4a6539 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
6 years agobus/vdev: replace device list lock by a recursive one
Thomas Monjalon [Tue, 22 May 2018 11:28:17 +0000 (13:28 +0200)]
bus/vdev: replace device list lock by a recursive one

A device like failsafe can manage sub-devices.
When removing such device, it removes its sub-devices
and try to take the same vdev_device_list_lock.
It was causing a deadlock because the lock was not recursive.

Fixes: 35f462839b69 ("bus/vdev: add lock on device list")

Suggested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Matan Azrad <matan@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
6 years agoethdev: fix type and scope of variables in Rx burst
Andy Green [Tue, 22 May 2018 01:24:47 +0000 (09:24 +0800)]
ethdev: fix type and scope of variables in Rx burst

GCC 8.1 warned:

In function 'rte_eth_rx_burst':
rte_ethdev.h:3836:18: warning: conversion to 'int16_t'
{aka 'short int'} from 'uint16_t' {aka 'short unsigned int'}
may change the sign of the result [-Wsign-conversion]
  int16_t nb_rx = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id],
                  ^
rte_ethdev.h:3844:50: warning: conversion to 'uint16_t'
{aka 'short unsigned int'} from 'int16_t' {aka 'short int'}
may change the sign of the result [-Wsign-conversion]
    nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx,
                                                  ^~~~~
rte_ethdev.h:3844:12: warning: conversion to 'int16_t'
{aka 'short int'} from 'uint16_t' {aka 'short unsigned int'}
may change the sign of the result [-Wsign-conversion]
    nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx,
            ^~
rte_ethdev.h:3851:9: warning: conversion to 'uint16_t'
{aka 'short unsigned int'} from 'int16_t' {aka 'short int'}
may change the sign of the result [-Wsign-conversion]
  return nb_rx;
         ^~~~~

The second part of the patch is solved by its own basic
block because it is inside a preprocessor conditional.

Bringing the declaration of the var to the top of the
function would require that also being given its own
preprocessor conditional, or a (void)var to avoid an
unused var warning.  The basic block is no worse than
those imho.

Fixes: 467465d86df1 ("ethdev: add packet count parameter to Rx callback")
Fixes: 4dc294158cac ("ethdev: support optional Rx and Tx callbacks")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agombuf: avoid integer promotion in prepend/adj/chain
Andy Green [Tue, 22 May 2018 01:24:42 +0000 (09:24 +0800)]
mbuf: avoid integer promotion in prepend/adj/chain

GCC 8.1 warned:

In function 'rte_pktmbuf_prepend':
rte_mbuf.h:1908:17: warning: conversion from 'int' to 'uint16_t'
{aka 'short unsigned int'} may change value [-Wconversion]
  m->data_off -= len;
                 ^~~
m->data_off is a uint16_t

        uint16_t data_off;

len (a uint16_t) is promoted to an int using -=.  Do the
subtraction explicitly and cast the result to uint16_t.

The below += or -= changes are solving the same thing.

In function 'rte_pktmbuf_adj':
rte_mbuf.h:1969:17: warning: conversion from 'int' to 'uint16_t'
{aka 'short unsigned int'} may change value [-Wconversion]
  m->data_off += len;
                 ^~~

In function 'rte_pktmbuf_chain':
rte_mbuf.h:2082:19: warning: conversion from 'int' to 'uint16_t'
{aka 'short unsigned int'} may change value [-Wconversion]
  head->nb_segs += tail->nb_segs;
                   ^~~~
Also uint16_t

        uint16_t nb_segs;         /**< Number of segments. */

Fixes: 08b563ffb19d ("mbuf: replace data pointer by an offset")
Fixes: 1a60a0daa6e4 ("mbuf: fix segments number type increase")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agombuf: avoid implicit demotion in 64-bit arithmetic
Andy Green [Tue, 22 May 2018 01:24:32 +0000 (09:24 +0800)]
mbuf: avoid implicit demotion in 64-bit arithmetic

GCC 8.1 warned:

In function 'rte_validate_tx_offload':
rte_mbuf.h:2112:19: warning: conversion to 'uint64_t'
{aka 'long unsigned int'} from 'int' may change the
sign of the result [-Wsign-conversion]
  inner_l3_offset += m->outer_l2_len + m->outer_l3_len;
                   ^~

  uint64_t inner_l3_offset...

  /* fields for TX offloading of tunnels */
  uint64_t outer_l3_len:9; /**< Outer L3 (IP) Hdr Length. */
  uint64_t outer_l2_len:7; /**< Outer L2 (MAC) Hdr Length. */

We want to do the arithmetic entirely in uint64_t
space, but with the +=, the rhs type becomes int since the
bitfields will fit in int.

Elaborate the artithmetic to be u64 = u64 + int + int, so
the type of the result is correct to be stored in the u64.

Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agombuf: fix type of variables in linearize function
Andy Green [Tue, 22 May 2018 01:24:37 +0000 (09:24 +0800)]
mbuf: fix type of variables in linearize function

GCC 8.1 warned:

In function 'rte_pktmbuf_linearize':
rte_mbuf.h:1873:32: warning: conversion to 'int' from 'uint32_t'
{aka 'unsigned int'} may change the sign of the result [-Wsign-conversion]
rte_mbuf.h:2166:13: note: in expansion of macro 'rte_pktmbuf_pkt_len'
   copy_len = rte_pktmbuf_pkt_len(mbuf) - rte_pktmbuf_data_len(mbuf);
rte_mbuf.h:2180:51: warning: conversion to 'size_t'
{aka 'long unsigned int'} from 'int' may change the
sign of the result [-Wsign-conversion]
rte_memcpy(buffer, rte_pktmbuf_mtod(m, char *), seg_len);
                                                ^~~~~~~

The temp is consumed as a size_t.  So let's make it
a size_t in the first place.

Fixes: 1feda4d8fc ("mbuf: add a function to linearize a packet")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agombuf: fix type of private size in detach
Andy Green [Tue, 22 May 2018 01:24:27 +0000 (09:24 +0800)]
mbuf: fix type of private size in detach

GCC 8.1 warned:

In function 'rte_pktmbuf_detach':
rte_mbuf.h:1583:17: warning: conversion from 'uint32_t'
{aka 'unsigned int'} to 'uint16_t' {aka 'short unsigned int'}
may change value [-Wconversion]
  m->priv_size = priv_size;
                 ^~~~~~~~~

The temp priv_size is declared as a uint32_t.  But it
only deals in uint16_t.  m->priv_size is a uint16_t.
Change it to a uint16_t.

Fixes: 355e6735b3 ("mbuf: fix cloning with private mbuf data")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet: explicit cast in L4 checksum
Andy Green [Tue, 22 May 2018 01:24:22 +0000 (09:24 +0800)]
net: explicit cast in L4 checksum

GCC 8.1 warned:

In function 'rte_ipv4_udptcp_cksum':
rte_byteorder.h:51:24: warning: conversion from 'long unsigned int' to
'uint32_t' {aka 'unsigned int'} may change value [-Wconversion]
 #define rte_bswap16(x) ((uint16_t) (__builtin_constant_p(x) ?  \
                        ^
rte_byteorder.h:85:29: note: in expansion of macro 'rte_bswap16'
 #define rte_be_to_cpu_16(x) rte_bswap16(x)
                             ^~~~~~~~~~~
rte_ip.h:321:11: note: in expansion of macro 'rte_be_to_cpu_16'
  l4_len = rte_be_to_cpu_16(ipv4_hdr->total_length) -
           ^~~~~~~~~~~~~~~~

Also with this one, it is a cast that always occurred
and is just being done explicitly, with no changes to
the generated code.

The warning stack is misleading, it points to the last
element in the macro that produced the lhs of the subtraction
above.  But the only "unsigned long int" in the expression is
the result of the sizeof() on the rhs, it promotes the
subtraction result to unsigned long.  So the error actually
relates to the result of the outer subtraction.

The actual error is "you are trying to put an unsigned long
into a uint32_t".  We always did so, the fix is just to inform
the compiler it is intentional with an explicit cast.

Fixes: 6006818cfb ("net: new checksum functions")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agoeal: explicit cast in rwlock functions
Andy Green [Tue, 22 May 2018 01:24:17 +0000 (09:24 +0800)]
eal: explicit cast in rwlock functions

GCC 8.1 warned:

In function 'rte_rwlock_read_lock':
rte_rwlock.h:74:12: warning: conversion to 'uint32_t'
{aka 'unsigned int'} from 'int32_t' {aka 'int'} may
change the sign of the result [-Wsign-conversion]
            x, x + 1);
            ^
rte_rwlock.h:74:17: warning: conversion to 'uint32_t'
{aka 'unsigned int'} from 'int' may change the sign
of the result [-Wsign-conversion]
            x, x + 1);
               ~~^~~

In function 'rte_rwlock_write_lock':
rte_rwlock.h:110:15: warning: unsigned conversion
from 'int' to 'uint32_t' {aka 'unsigned int'}
changes value from '-1' to '4294967295' [-Wsign-conversion]
            0, -1);
               ^~

Again in this case we are making explicit the exact cast
that was always happening implicitly.  The patch does not
change the generated code.

The int32_t temp "x" is required to be signed to detect
a < 0 error condition from the lock status.  Afterwards,
it has always been implicitly cast to uint32_t when it
is used in the arguments to rte_atomic32_cmpset()...
gcc8.1 objects to the implicit cast now and requires us
to cast it explicitly.

Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agoeal/x86: fix type of variable in memcpy function
Andy Green [Tue, 22 May 2018 01:24:12 +0000 (09:24 +0800)]
eal/x86: fix type of variable in memcpy function

GCC 8.1 warned:

rte_memcpy.h:793:2: note: in expansion of macro 'MOVEUNALIGNED_LEFT47'
  MOVEUNALIGNED_LEFT47(dst, src, n, srcofs);
  ^~~~~~~~~~~~~~~~~~~~
rte_memcpy.h:649:51: warning: conversion from 'size_t'
{aka 'long unsigned int'} to 'int' may change value [-Wconversion]
     case 0x0B: MOVEUNALIGNED_LEFT47_IMM(dst, src, n, 0x0B); break;
                                                   ^

rte_memcpy.h:616:15: note: in definition of macro 'MOVEUNALIGNED_LEFT47_IMM'
         tmp = len;
               ^~~
rte_memcpy.h:793:2: note: in expansion of macro 'MOVEUNALIGNED_LEFT47'
  MOVEUNALIGNED_LEFT47(dst, src, n, srcofs);
  ^~~~~~~~~~~~~~~~~~~~
rte_memcpy.h:618:13: warning: conversion to 'size_t'
{aka 'long unsigned int'} from 'int'
may change the sign of the result [-Wsign-conversion]
         tmp -= len;
             ^~

rte_memcpy.h:649:16: note: in expansion of macro 'MOVEUNALIGNED_LEFT47_IMM'
     case 0x0B: MOVEUNALIGNED_LEFT47_IMM(dst, src, n, 0x0B); break;
                ^~~~~~~~~~~~~~~~~~~~~~~~
rte_memcpy.h:793:2: note: in expansion of macro 'MOVEUNALIGNED_LEFT47'
  MOVEUNALIGNED_LEFT47(dst, src, n, srcofs);
  ^~~~~~~~~~~~~~~~~~~~
rte_memcpy.h:618:13: warning: conversion to 'size_t'
{aka 'long unsigned int'} from 'int'
may change the sign of the result [-Wsign-conversion]
             tmp -= len;
                 ^~

We can eliminate the problems by setting the type of tmp to
size_t in the first place.

Fixes: d35cc1fe6a ("eal/x86: revert select optimized memcpy at run-time")
Cc: stable@dpdk.org
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agoapp/testpmd: fix burst stats reporting
Daniel Shelepov [Mon, 14 May 2018 21:12:15 +0000 (21:12 +0000)]
app/testpmd: fix burst stats reporting

When RTE_TEST_PMD_RECORD_BURST_STATS is enabled, testpmd collects
burst statistics and includes them in the port stats report.  The
summary should include top 2 most frequent burst sizes, but there is a
bug in finding the top-2.  During the scan of burst size counts, the
top-2 can change only if top-1 also changes.

Added logic to update the top-2 if current burst size is larger than
existing top-2, but smaller than existing top-1.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Daniel Shelepov <dashel@microsoft.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
6 years agoraw/ifpga/base: fix an error return
Tianfei Zhang [Wed, 16 May 2018 08:49:04 +0000 (16:49 +0800)]
raw/ifpga/base: fix an error return

fix a return error value by DPDK Coverity static code analysis

Coverity issue: 279448
Fixes: 56bb54ea1bdf ("raw/ifpga/base: add Intel FPGA OPAE share code")

Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
6 years agolog: fix pattern matching
Ferruh Yigit [Wed, 16 May 2018 14:09:28 +0000 (15:09 +0100)]
log: fix pattern matching

loglevel set wrong when ":" is used as separator, like
--log-type="user:debug"

This is because fnmatch returns zero on success. Fixed fnmatch return
value check.

Fixes: 7f0bb634a140 ("log: add ability to match log type with globbing")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agomempool/bucket: add to meson build
Andrew Rybchenko [Wed, 16 May 2018 16:44:53 +0000 (17:44 +0100)]
mempool/bucket: add to meson build

Fixes: 4ed00862c81d ("mempool/bucket: implement bucket mempool manager")

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
6 years agobus/vdev: fix double space in logs
Stephen Hemminger [Wed, 16 May 2018 21:51:40 +0000 (14:51 -0700)]
bus/vdev: fix double space in logs

The VDEV_LOG() macro already adds a newline, don't duplicate.

Fixes: d22fcb225c24 ("bus/vdev: change log type")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
6 years agotest/eventdev: fix ethdev port id to 16-bit
Vipin Varghese [Tue, 15 May 2018 18:06:42 +0000 (23:36 +0530)]
test/eventdev: fix ethdev port id to 16-bit

port id in test case is update to unsigned int 16 bit, to
prevent compilation failure when RTE_MAX_ETHPORTS port is
set more than 255.

Fixes: fc8030eb8fe9 ("test/eventdev: add tests for eth Rx adapter APIs")
Cc: stable@dpdk.org
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Nikhil Rao <nikhil.rao@intel.com>
6 years agoeal: fix runtime directory permissions
Adrien Mazarguil [Fri, 18 May 2018 13:55:35 +0000 (15:55 +0200)]
eal: fix runtime directory permissions

Executable bit must be set on directories for normal users to enter them.

This patch addresses the inability to start DPDK applications as non-root
due to errors such as:

 EAL: failed to bind /tmp/dpdk/rte/mp_socket: Permission denied

Fixes: 56236363b481 ("eal: add directory for runtime data")

Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
6 years agoraw/ifpga: fix ARM build with clang
Gavin Hu [Thu, 17 May 2018 02:46:10 +0000 (10:46 +0800)]
raw/ifpga: fix ARM build with clang

The patch fixes the compile issue with clang on ARM64, as well as
clang + X86 builing hosts.

Newly introduced #pragma pack(1) in the header file caused compiling
issues for the files who included it.

In file included from drivers/raw/ifpga_rawdev/base/ifpga_fme_dperf.c:5:
In file included from drivers/raw/ifpga_rawdev/base/ifpga_feature_dev.h:8:
drivers/raw/ifpga_rawdev/base/ifpga_hw.h:8:10: error:
the current #pragma pack alignment value is modified in the included file

The fix is to change the #pragma pack alignment locally and not have
effect on other files who included this header file.

Fixes: 56bb54ea1bdf ("raw/ifpga/base: add Intel FPGA OPAE share code")

Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>