dpdk.git
3 years agoethdev: dump single flow rule
Haifei Luo [Wed, 14 Apr 2021 10:19:59 +0000 (13:19 +0300)]
ethdev: dump single flow rule

Previous implementations support dump all the flows. Add new arg
rte_flow in rte_flow_dev_dump to dump one flow.

Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
3 years agodrivers: add missing includes
Ferruh Yigit [Fri, 26 Mar 2021 16:46:15 +0000 (16:46 +0000)]
drivers: add missing includes

These headers are used but not included explicitly, including them.

"arpa/inet.h" is included for 'htons' and friends.
"netinet/in.h" is included for 'IPPROTO_IP'.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
3 years agonet/mvpp2: check meter packet mode
Li Zhang [Tue, 13 Apr 2021 15:59:57 +0000 (18:59 +0300)]
net/mvpp2: check meter packet mode

Currently meter algorithms only supports bytes per second(BPS).
Check packet_mode set to TRUE are rejected.

Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Liron Himi <lironh@marvell.com>
3 years agonet/softnic: check meter packet mode
Li Zhang [Tue, 13 Apr 2021 15:59:56 +0000 (18:59 +0300)]
net/softnic: check meter packet mode

Currently meter algorithms only supports bytes per second(BPS).
Check packet_mode set to TRUE are rejected.

Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
3 years agoapp/testpmd: add meter profile packet mode option
Li Zhang [Tue, 13 Apr 2021 15:59:55 +0000 (18:59 +0300)]
app/testpmd: add meter profile packet mode option

add meter profile packet_mode to the ethernet device.
One example:
add port meter profile rfc2697 (port_id) (profile_id)
(cir) (cbs) (ebs) (packet_mode)

Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
3 years agoethdev: add packet mode in meter profile structure
Li Zhang [Tue, 13 Apr 2021 15:59:54 +0000 (18:59 +0300)]
ethdev: add packet mode in meter profile structure

Currently meter algorithms only supports rate is bytes per second (BPS).
Add packet_mode flag in meter profile parameters data structure.
So that it can meter traffic by packet per second.

When packet_mode is 0, the profile rates and bucket sizes are
specified in bytes per second and bytes
when packet_mode is not 0, the profile rates and bucket sizes are
specified in packets and packets per second.

The below structure will be extended:
rte_mtr_meter_profile
rte_mtr_capabilities

Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
3 years agonet/ice: update QinQ switch filter handling
Haiyue Wang [Tue, 13 Apr 2021 05:14:59 +0000 (13:14 +0800)]
net/ice: update QinQ switch filter handling

The hardware outer/inner VLAN protocol types are now updated to map to
new interface VLAN protocol types, so update the application to use new
VLAN protocol types when the rte_flow is QinQ filter type.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
3 years agonet/ice/base: allow GTP-U filter using only inner protocols
Qi Zhang [Tue, 13 Apr 2021 05:06:40 +0000 (13:06 +0800)]
net/ice/base: allow GTP-U filter using only inner protocols

Adds a support for switch filter: GTP-U using just inner fields.
If user doesn't specify outer protocol and its fields but wants to
add switch filter for GTP-U using inner protocols and related fields
such as inner L3 and/or inner L4, this patch enables such filtering.

Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: add packet type for PPPoL2TPv2oUDP
Qi Zhang [Tue, 13 Apr 2021 05:06:39 +0000 (13:06 +0800)]
net/ice/base: add packet type for PPPoL2TPv2oUDP

Add some new macros of PTYPE values to support PPPoL2TPv2oUDP.

Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: fix QinQ PPPoE dummy packet selection
Qi Zhang [Tue, 13 Apr 2021 05:06:38 +0000 (13:06 +0800)]
net/ice/base: fix QinQ PPPoE dummy packet selection

The dummy packet should be QinQ PPPoE ipv6 when ppp protocol is ipv6.

Fixes: bb3386f348dd ("net/ice: enable QinQ filter for switch")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: add inner VLAN protocol type for QinQ filter
Qi Zhang [Tue, 13 Apr 2021 05:06:37 +0000 (13:06 +0800)]
net/ice/base: add inner VLAN protocol type for QinQ filter

Since VLAN protocol type 'ICE_VLAN_OFOS' has been changed to map
the hardware VLAN protocol ID to 'ICE_VLAN_OF_HW (16)' when in Double
VLAN mode, and to 'ICE_VLAN_OL_HW (17)' when in Single VLAN mode.

So 'ICE_VLAN_OFOS' can't be used with 'ICE_VLAN_EX' which is outer VLAN
hardware protocol ID 'ICE_VLAN_OF_HW (16)' to do the QinQ VLAN pattern.

Introduce the new inner VLAN protocol type 'ICE_VLAN_IN', which is inner
VLAN hardware protocol ID 'ICE_VLAN_OL_HW (17)'.

Now for QinQ VLAN pattern, the protocol 'ICE_VLAN_EX' and 'ICE_VLAN_IN'
should be used to set the related protocol header fields like VLAN ID.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: add set/get GPIO helper functions
Qi Zhang [Tue, 13 Apr 2021 05:06:35 +0000 (13:06 +0800)]
net/ice/base: add set/get GPIO helper functions

Add helper functions to set the GPIO pin state or get the value of a
GPIO signal that's the part of the topology based on AQ commands.
This change is needed to setup GPIO pins state for PTP, SyncE etc.

Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: enable I2C read/write commands
Qi Zhang [Tue, 13 Apr 2021 05:06:33 +0000 (13:06 +0800)]
net/ice/base: enable I2C read/write commands

Enable I2C read/write AQ commands. They are now required for
controlling the external physical connectors via external I2C
port expander on E810-T adapters.

Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: add priority check of matching recipe
Qi Zhang [Tue, 13 Apr 2021 05:06:36 +0000 (13:06 +0800)]
net/ice/base: add priority check of matching recipe

Check priority when look for a recipe which matches our request
to enable flow priority for switch filter.

Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: change protocol ID for VLAN in DVM
Qi Zhang [Tue, 13 Apr 2021 05:06:32 +0000 (13:06 +0800)]
net/ice/base: change protocol ID for VLAN in DVM

Protocol id for first vlan in Double VLAN Mode (DVM) should be
ICE_VLAN_OF_HW = 16, but for Single VLAN Mode (SVM) this should be
ICE_VLAN_OL_HW = 17.

Change protocol id in type to id translation array for outer vlan
to 17 when DVM is enabled, which means the driver, package,
and firmware support DVM.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: support PPPoL2TPv2oUDP RSS hash
Qi Zhang [Tue, 13 Apr 2021 05:06:34 +0000 (13:06 +0800)]
net/ice/base: support PPPoL2TPv2oUDP RSS hash

Add support for PPPoL2TPv2oUDP RSS hash. L2TPv2 and PPP ptypes
and flow headers are added. Protocol id for PPP is added.

Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: set MAC type for E823C device
Qi Zhang [Tue, 13 Apr 2021 05:06:31 +0000 (13:06 +0800)]
net/ice/base: set MAC type for E823C device

Set E823C device's MAC type as generic.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: remove unused ptype field in PTT definition
Qi Zhang [Tue, 13 Apr 2021 05:06:30 +0000 (13:06 +0800)]
net/ice/base: remove unused ptype field in PTT definition

Remove the unused ptype entry, and use the gcc extension for
ranged initializers in arrays for Linux, and explicitly target
each table entry by index when initializing under Linux.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: print link configure error
Qi Zhang [Tue, 13 Apr 2021 05:06:29 +0000 (13:06 +0800)]
net/ice/base: print link configure error

Newer NVMs return link_cfg_err for get_link_status AQ. Print it
for debug use.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: support removing VSI from flow profile
Qi Zhang [Tue, 13 Apr 2021 05:06:28 +0000 (13:06 +0800)]
net/ice/base: support removing VSI from flow profile

Adding a function ice_flow_rem_vsi_prof() to remove flow entries
associated to the SW VSI handle. Once complete, clear the vsi index from
the flow profile bitmap. This will ensure that a VSI once removed
can be re-added and the package block rules will be added again.

Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice/base: cleanup code
Qi Zhang [Tue, 13 Apr 2021 05:06:27 +0000 (13:06 +0800)]
net/ice/base: cleanup code

1. There are a lots of function header mismatch its function name.
2. remove unnecessary header file include.
3. remove unnecessary macro.
4. remove unnecessary comment.

Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
3 years agonet/ice: use write combining store for tail on AVX512
Radu Nicolau [Fri, 9 Apr 2021 10:09:03 +0000 (10:09 +0000)]
net/ice: use write combining store for tail on AVX512

Performance improvement: use a write combining store
instead of a regular mmio write to update queue tail
registers.

Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
3 years agonet/ixgbe: fix Rx errors statistics for UDP checksum
Haiyue Wang [Thu, 8 Apr 2021 06:30:00 +0000 (14:30 +0800)]
net/ixgbe: fix Rx errors statistics for UDP checksum

Restrict the "remove l3_l4_xsum_errors from rx_errors" to 82599 only for
hardware errata.

Fixes: 256ff05a9cae ("ixgbe: fix Rx errors statistics for UDP checksum")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
3 years agonet/mlx5: fix resource release for mirror flow
Jiawei Wang [Fri, 9 Apr 2021 12:33:28 +0000 (15:33 +0300)]
net/mlx5: fix resource release for mirror flow

The mlx5 PMD allocated the resources of the sample actions, and then
moved these ones to the destination actions array. The original indices
were not cleared and the resources were referenced twice in the
flow object - as the fate actions and in the destination actions array.

This causes the failure on flow destroy because PMD tried to release the
same objects twice.

The patch clears the original indices, add the missed checking for zero
and eliminates multiple object releasing.

Fixes: 00c10c22118a ("net/mlx5: update translate function for mirroring")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Reviewed-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
3 years agonet/mlx4: fix RSS action with null hash key
Viacheslav Ovsiienko [Wed, 7 Apr 2021 15:30:15 +0000 (15:30 +0000)]
net/mlx4: fix RSS action with null hash key

If RSS action contains non zero hash key length and NULL
key buffer pointer the default hash key should be used.
The check for the NULL pointer this was missing in the mlx4
PMD causing crash, for example, in testpmd with command:

flow validate 0 ingress group 0
  pattern eth / ipv4 / end
  actions rss queues 0 end key_len 40 / end

Fixes: ac8d22de2394 ("ethdev: flatten RSS configuration in flow API")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
3 years agodoc: update push/pop VLAN support in mlx5 guide
Dong Zhou [Thu, 1 Apr 2021 13:22:47 +0000 (16:22 +0300)]
doc: update push/pop VLAN support in mlx5 guide

Updates the documentation for push/pop VLAN support. In E-Switch
mode, push VLAN on ingress traffic and pop VLAN in egress traffic
are both support.

Signed-off-by: Dong Zhou <dongzhou@nvidia.com>
Reviewed-by: Asaf Penso <asafp@nvidia.com>
3 years agonet/mlx5: fix redundant flow after RSS expansion
Xiaoyu Min [Tue, 30 Mar 2021 13:40:32 +0000 (21:40 +0800)]
net/mlx5: fix redundant flow after RSS expansion

When RSS expand, if there is no expansion happened but completion
happened because user only input next protocol field instead of item
i.e, ether type == 0x8100 instead of VLAN, an extra flow is created with
missing item in order to filter traffic strictly.

However, after [1] and [2] the rte_flow_item_eth itself is enough to
filter out VLAN traffic, the VLAN item is not needed.

[1]: commit 09315fc83861 ("ethdev: add VLAN attributes to ethernet and VLAN items")
[2]: commit 86b59a1af671 ("net/mlx5: support VLAN matching fields")

This redundant flow will cause failure in some scenarios on group 0 due
to they are the same FTE.

Fixes: fc2dd8dd492f ("ethdev: fix expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
3 years agonet/mlx5: support 64-bit for modify field action
Alexander Kozyrev [Wed, 7 Apr 2021 15:18:29 +0000 (15:18 +0000)]
net/mlx5: support 64-bit for modify field action

Extend the range of immediate value used in the MODIFY_FIELD action
from 32 to 64 bits to conform to the rte_flow_action_modify_data spec.
Apply appropriate big endian conversion to the immediate value
according to a destination field bit width.

Fixes: 641dbe4fb053 ("net/mlx5: support modify field flow action")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
3 years agonet/mlx5: fix modify field action endianness
Alexander Kozyrev [Fri, 2 Apr 2021 02:07:41 +0000 (02:07 +0000)]
net/mlx5: fix modify field action endianness

Converting modify_field action masks to the big endian format is wrong
for small (less than 4 bytes) fields. Use the BE conversions appropriate
for a field size, not rte_cpu_to_be_32 for everything.

Fixes: 144127ba5660 ("net/mlx5: adjust modify field action endianness")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
3 years agonet/mlx5: fix modify field action order for IPv6
Alexander Kozyrev [Wed, 7 Apr 2021 01:14:33 +0000 (01:14 +0000)]
net/mlx5: fix modify field action order for IPv6

Mellanox hardware can only modify any packet field in 32-bit chunks,
which means 4 such chunks are needed to modify an IPv6 address.
The modification order of these chunks starts from the most significant
bits for the IPv6 address. That leads to confusing results when trying
to modify either source or destination address via the MODIFY_FIELD
action. Fix the order of 32-bit chunks for IPv6 addresses modification
by starting from the least significant bits.

Fixes: 641dbe4fb053 ("net/mlx5: support modify field flow action")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
3 years agonet/mlx5: fix link speed calculation on Windows
Tal Shnaiderman [Tue, 6 Apr 2021 07:31:59 +0000 (10:31 +0300)]
net/mlx5: fix link speed calculation on Windows

In Windows DevX returns the rate of the current link speed
in bit/s, this rate was converted to Mibit/s instead of the Mbit/s
rate expected by DPDK resulting in wrong link speed reporting.

Fixes: 6fbd73709ee4 ("net/mlx5: support link update on Windows")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
3 years agonet/mlx5: check extended metadata for meta modification
Alexander Kozyrev [Wed, 7 Apr 2021 01:13:57 +0000 (01:13 +0000)]
net/mlx5: check extended metadata for meta modification

The MODIFY_FIELD action requires the extended metadata support
in order to manipulate on METADATA register as well as on MARK register.
Check if it is supported and reject the MODIFY_FIELD action if it is not
just like it was done before for the MARK register modifications.

Fixes: 0588d64ffde3 ("net/mlx5: check extended metadata for mark modification")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
3 years agonet/iavf: support flow director for IP fragment
Jeff Guo [Tue, 13 Apr 2021 08:10:32 +0000 (16:10 +0800)]
net/iavf: support flow director for IP fragment

New FDIR parsing are added to handle the fragmented IPv4/IPv6 packet.

Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
3 years agonet/iavf: support RSS hash for IP fragment
Jeff Guo [Tue, 13 Apr 2021 08:10:31 +0000 (16:10 +0800)]
net/iavf: support RSS hash for IP fragment

New pattern and RSS hash flow parsing are added to handle fragmented
IPv4/IPv6 packets.

Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
3 years agocommon/iavf: add protocol header for IP fragment
Jeff Guo [Tue, 13 Apr 2021 08:10:30 +0000 (16:10 +0800)]
common/iavf: add protocol header for IP fragment

Add new virtchnl protocol header type and fields for IP fragment packets
to support RSS hash and FDIR.

Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
3 years agonet/ice: fix illegal access when removing MAC filter
Wenwu Ma [Fri, 2 Apr 2021 13:52:47 +0000 (13:52 +0000)]
net/ice: fix illegal access when removing MAC filter

When removing the mac filter in ice_remove_all_mac_vlan_filters(),
TAILQ_FOREACH_SAFE should be used instead of TAILQ_FOREACH,
Otherwise, it will result in a illegal pointer access.

Fixes: e0dcf94a0d7f ("net/ice: support VLAN ops")
Cc: stable@dpdk.org
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Tested-by: Zhihong Peng <zhihongx.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
3 years agonet/e1000: fix max Rx packet size
Alvin Zhang [Thu, 8 Apr 2021 07:41:02 +0000 (15:41 +0800)]
net/e1000: fix max Rx packet size

According to E1000_ETH_OVERHEAD definition, max_rx_pkt_len contains
one VLAN tag size. Therefore when config RLPML register, if dual VLAN
not enabled there is no need to add VLAN tag size to max_rx_pkt_len,
otherwise only one another VLAN tag size should be added to.

Fixes: e51abef39382 ("igb: fix max RX packet size and support dual VLAN")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Tested-by: Lingli Chen <linglix.chen@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
3 years agonet/ice: extend invalid RSS combinations
Lingyu Liu [Thu, 8 Apr 2021 15:54:36 +0000 (15:54 +0000)]
net/ice: extend invalid RSS combinations

When create a rule with following invalid RSS type combinations,
it should fail.

Invalid RSS combinations list:
- ETH_RSS_IPV4 | ETH_RSS_NONFRAG_IPV4_TCP
- ETH_RSS_IPV6 | ETH_RSS_NONFRAG_IPV6_TCP

This patch adds these combinations in 'invalid_rss_comb' array to
do valid check, if the combination check failed, the rule will be
created failed.

Signed-off-by: Lingyu Liu <lingyu.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
3 years agonet/enic: fix completion pointer calculation
John Daley [Mon, 12 Apr 2021 20:50:21 +0000 (13:50 -0700)]
net/enic: fix completion pointer calculation

The completion queue index could be implicitly extended past its
uint16_t size when multiplied by the size of the descriptor. While
this should not be a problem, coverity flags it. Do the extension
explicitly by casting the index to uintptr_t.

Coverity issue: 161317
Fixes: 8b428cb5a92e ("net/enic: use 64B completion queue entries if available")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
3 years agocommon/sfc_efx/base: fix indication of MAE encap support
Ivan Malov [Sat, 10 Apr 2021 00:51:43 +0000 (03:51 +0300)]
common/sfc_efx/base: fix indication of MAE encap support

The indication fields in the MCDI response are individual
bits, but the current code mistakenly compares the larger
dword with 1. This breaks encap. type discovery. Fix that.

Fixes: 891408c45a63 ("common/sfc_efx/base: indicate MAE support for encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
3 years agonet/hns3: fix configure FEC when concurrent with reset
Chengchang Tang [Sat, 10 Apr 2021 01:11:20 +0000 (09:11 +0800)]
net/hns3: fix configure FEC when concurrent with reset

Currently, after the reset is complete, the PMD restores the FEC
according to the FEC configuration reserved in the driver. If there is a
concurrency between the FEC setup operation and the restore operation
after a reset, the FEC status of the last hardware may be unknown.

This patch adds the step of obtaining the lock when setting the FEC to
avoid concurrency between restore operation and setting operation.

Fixes: 9bf2ea8dbc65 ("net/hns3: support FEC")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
3 years agonet/hns3: fix queue state when concurrent with reset
Chengchang Tang [Sat, 10 Apr 2021 01:11:19 +0000 (09:11 +0800)]
net/hns3: fix queue state when concurrent with reset

At the end of the reset, the state of queues need to be restored
according to the states saved in the driver. If the start and stop
operations of the queues are concurrent at this time, it may cause the
final status to be uncertain.

This patch requires queues to acquire the hw lock before starting and
stopping. If the device is being restored due to reset at this time, it
will block until the reset is completed.

Fixes: fa29fe45a7b4 ("net/hns3: support queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
3 years agonet/hns3: fix timing in resetting queues
Chengchang Tang [Sat, 10 Apr 2021 01:11:18 +0000 (09:11 +0800)]
net/hns3: fix timing in resetting queues

During the task queue pairs reset, the getimeofday is used to obtain the
timestamp to determine whether the command execution times out. But
gettimeofday is not monotonous, it can be modified by system
administrators, so the timing may not be accurate or even cause the loop
to wait consistently.
And actually, in this scenario, it is not necessary to obtain the
timestamp.

This patch removes the operation of obtaining the timestamp from the task
queue pairs reset function.

Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
3 years agonet/hns3: fix some packet types
Chengwen Feng [Sat, 10 Apr 2021 01:11:17 +0000 (09:11 +0800)]
net/hns3: fix some packet types

Currently, the packet type calculated by
vlan/ovlan/l3id/l4id/ol3id/ol4id fields have the following problems:
1) Identify error when exist VLAN strip which will lead to the data
   buffer has non VLAN header but mbuf's ptype have L2_ETHER_VLAN flag.
2) Some packet identifies error, eg: hardware report it's RARP or
   unknown packet, but ptype will marked with L2_ETHER .

So driver will calculate packet type only by l3id/l4id/ol3id/ol4id
fields.

Fixes: 0e98d5e6d9c3 ("net/hns3: fix packet type report in Rx")
Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
3 years agonet/hns3: fix concurrent interrupt handling
Hongbo Zheng [Sat, 10 Apr 2021 01:11:16 +0000 (09:11 +0800)]
net/hns3: fix concurrent interrupt handling

Currently, if RAS interrupt and FLR occurred at the same time, FLR will
be detected and corresponding schedule state will be set during RAS
interrupt processing. However, the schedule state value will be
overridden in subsequent RAS processing, resulting in FLR processing
failure. This patch solves this problem.

Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
3 years agonet/hns3: fix rollback in PF init
Min Hu (Connor) [Sat, 10 Apr 2021 01:11:15 +0000 (09:11 +0800)]
net/hns3: fix rollback in PF init

This patch adds rollback processing when updating imissed
stats failed in PF init.

Fixes: 3e9f3042d7c8 ("net/hns3: add imissed packet stats")

Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
3 years agonet/hns3: simplify selecting Rx/Tx function
Chengwen Feng [Sat, 10 Apr 2021 01:11:14 +0000 (09:11 +0800)]
net/hns3: simplify selecting Rx/Tx function

Currently, there are four control variables (rx_simple_allowed,
rx_vec_allowed, tx_simple_allowed and tx_vec_allowed) which are used
to impact the selection of Rx/Tx burst function.

The purpose of the design is to provide a way to control the selection
of Rx/Tx burst function by modifying it's values, but these variables
have no entry to modify unless make intrusive modifications.

Now we already support runtime config to select Rx/Tx function, these
variables could be removed.

Fixes: a124f9e9591b ("net/hns3: add runtime config to select IO burst function")

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
3 years agonet/hns3: log selected datapath
Chengwen Feng [Fri, 9 Apr 2021 10:26:43 +0000 (18:26 +0800)]
net/hns3: log selected datapath

This patch adds debug info for Rx/Tx burst function which was choosing.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
3 years agonet/hns3: refactor PF LSC event report
Chengwen Feng [Fri, 9 Apr 2021 04:45:22 +0000 (12:45 +0800)]
net/hns3: refactor PF LSC event report

Currently, PF driver will report lsc when it detects the link status
change, it's not a generic implementation.

We refactor PF lsc event report by following scheme:
1. PF driver marks RTE_PCI_DRV_INTR_LSC in rte_pci_driver by default.
2. In the init stage, PF driver will detect whether firmware supports
   lsc interrupt or not, driver will clear RTE_ETH_DEV_INTR_LSC flag if
   firmware doesn't support lsc interrupt.
3. PF driver will report lsc event only when dev_conf.intr_conf.lsc is
   set.

Note: If the firmware supports lsc interrupt, we also keep periodic
polling to deal with the interrupt loss.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
3 years agonet/hns3: refactor VF LSC event report
Chengwen Feng [Fri, 9 Apr 2021 04:45:21 +0000 (12:45 +0800)]
net/hns3: refactor VF LSC event report

Currently, VF driver periodically obtains link status from PF kernel
driver, and reports lsc event when detects link status change. Because
the period is 1 second, it's probably too late to report especially
in such as bonding scenario.

To solve this problem we use the following scheme:
1. PF kernel driver support immediate push link status to all VFs when
   it detects the link status changes.
2. VF driver will detect PF kernel driver whether support push link
   status in device init stage by sending request link info mailbox
   message to PF, PF then tell VF the push capability by extend
   HNS3_MBX_LINK_STAT_CHANGE mailbox message.
3. VF driver marks RTE_PCI_DRV_INTR_LSC in rte_pci_driver by default,
   when it detects PF doesn't support push link status then it will clear
   RTE_ETH_DEV_INTR_LSC flag.

So if PF kernel driver supports push link status to VF, then VF driver
will have RTE_ETH_DEV_INTR_LSC capability.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
3 years agotest: fix TCP header initialization
Lance Richardson [Tue, 30 Mar 2021 13:23:28 +0000 (09:23 -0400)]
test: fix TCP header initialization

Initialize TCP data offset field with TCP header length, this
field is used to derive L4 header length and by hardware to
validate a TCP header.

Fixes: 41f72ec94074 ("test: add packet burst generator functions")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
3 years agoapp/testpmd: fix missing MPLS tokens for RSS
Hemant Agrawal [Thu, 8 Apr 2021 09:17:44 +0000 (14:47 +0530)]
app/testpmd: fix missing MPLS tokens for RSS

This patch adds missing MPLS tokens in for RSS config.

Fixes: d810252857c9 ("ethdev: add MPLS RSS offload type")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
3 years agoethdev: fix VXLAN mask initialization
Gregory Etelson [Thu, 8 Apr 2021 06:48:22 +0000 (09:48 +0300)]
ethdev: fix VXLAN mask initialization

In GCC compiler, __builtin_constant_p(exp) is a function.
The function returns the integer 1 if the argument is known to be
a compile-time constant.
Therefore, __builtin_constant_p(0xffffff << 8) returned 1.
As the result, rte_flow_item_vxlan_mask was initiated to
{{
  {flags = 0x0, rsvd0 = {0x0, 0x0, 0x0},
   vni = {0x0, 0x0, 0x0}, rsvd1 = 0x1},
  hdr = {vx_flags = 0x0, vx_vni = 0x1000000}}}
}}
GCC fails initialization
rte_flow_item_vxlan_mask.hdr.vni = (0xffffff << 8)
with "initializer element is not a constant expression" error.
Use immediate 0xffffff00 value instead.

Fixes: 43af98e687cf ("ethdev: reuse VXLAN header definition in flow item")

Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
3 years agobuildtools: fix all drivers disabled on Windows
Dmitry Kozlyuk [Fri, 16 Apr 2021 20:48:52 +0000 (23:48 +0300)]
buildtools: fix all drivers disabled on Windows

buildtools/list-dir-globs.py printed paths with OS directory separator,
which is "/" on Unices and "\" on Windows, while Meson code always
expected "/". This resulted in all drivers being disabled on Windows.

Replace "\" with "/" in script output. Forward slash is a valid,
although non-default, separator on Windows, so no paths can be broken
by this substitution.

Fixes: ab9407c3addd ("build: allow using wildcards to disable drivers")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
3 years agodoc: add links for build requirements per OS
Asaf Penso [Wed, 24 Feb 2021 08:53:24 +0000 (08:53 +0000)]
doc: add links for build requirements per OS

To compile with meson some dependencies should be installed.
Section "Getting the Tools" describes what needed, but per
OS there are additional steps to do.

Add links to Linux, FreeBSD, and Windows guide for more info.

Signed-off-by: Asaf Penso <asafp@nvidia.com>
3 years agodoc: update minimum required Meson version for Windows
Jie Zhou [Wed, 24 Feb 2021 23:36:52 +0000 (15:36 -0800)]
doc: update minimum required Meson version for Windows

Meson with Windows clang generates incorrect linker flag
"--subsystem,console" instead of "/subsystem:console" which
will fail the DPDK build. This is discovered at porting testpmd.

Meson 0.57.0 has the fix and should be used for DPDK Windows build.
Update the WindowsGSG DPDK Build document for the proper meson version.

Signed-off-by: Jie Zhou <jizh@microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
3 years agobuild: update minimum required Meson version
Gabriel Ganne [Tue, 23 Mar 2021 09:52:19 +0000 (10:52 +0100)]
build: update minimum required Meson version

Bump Meson required version to 0.49.2 which is chosen so as
to be provided by both redhat-8 and debian-10.

Update documentation and travis setup script accordingly.

This fixes the following warning:
WARNING: Project targeting '>= 0.47.1' but tried to use feature introduced
         in '0.48.0': console arg in custom_target

'console' argument is used within kernel/linux/kni/meson.build

Signed-off-by: Gabriel Ganne <gabriel.ganne@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
3 years agoexamples/l2fwd-crypto: remove key size validation
Shiri Kuzin [Tue, 13 Apr 2021 16:24:52 +0000 (19:24 +0300)]
examples/l2fwd-crypto: remove key size validation

In the example application the key can be provided by the user or
generated randomly by the example application.

Then a validation is done in order to check if the key size is
supported in the algorithm capabilities.

A new feature flag is added in crypto PMDs to allow wrapped keys,
hence, to allow wrapped keys, app should remove the validation of
key size in the application and rely on a PMD key size validation.

The validation is removed in case the key is provided by user and
the RTE_CRYPTODEV_FF_CIPHER_WRAPPED_KEY feature flag is set, and
kept in case the key should be generated by the application or
RTE_CRYPTODEV_FF_CIPHER_WRAPPED_KEY is not set.

Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agocryptodev: formalize key wrap method in API
Matan Azrad [Tue, 13 Apr 2021 06:37:18 +0000 (09:37 +0300)]
cryptodev: formalize key wrap method in API

The Key Wrap approach is used by applications in order to protect keys
located in untrusted storage or transmitted over untrusted
communications networks. The constructions are typically built from
standard primitives such as block ciphers and cryptographic hash
functions.

The Key Wrap method and its parameters are a secret between the keys
provider and the device, means that the device is preconfigured for
this method using very secured way.

The key wrap method may change the key length and layout.

Add a description for the cipher transformation key to allow wrapped key
to be forwarded by the same API.

Add a new feature flag RTE_CRYPTODEV_FF_CIPHER_WRAPPED_KEY to be enabled
by PMDs support wrapped key in cipher trasformation.

Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agocryptodev: add dequeue count parameter in raw API
Fan Zhang [Wed, 31 Mar 2021 17:20:38 +0000 (18:20 +0100)]
cryptodev: add dequeue count parameter in raw API

This patch changes the experimental raw data path dequeue burst API.
Originally the API enforces the user to provide callback function
to get maximum dequeue count. This change gives the user one more
option to pass directly the expected dequeue count.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agocrypto/octeontx2: support lookaside IPv4 transport mode
Tejasree Kondoj [Thu, 15 Apr 2021 07:22:05 +0000 (12:52 +0530)]
crypto/octeontx2: support lookaside IPv4 transport mode

Adding support for IPv4 lookaside IPsec transport mode.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agoexamples/ipsec-secgw: support UDP encapsulation
Tejasree Kondoj [Thu, 15 Apr 2021 07:22:04 +0000 (12:52 +0530)]
examples/ipsec-secgw: support UDP encapsulation

Adding lookaside IPsec UDP encapsulation support
for NAT traversal.
Application has to add udp-encap option to sa config file
to enable UDP encapsulation on the SA.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
3 years agocrypto/octeontx2: support UDP encapsulation
Tejasree Kondoj [Thu, 15 Apr 2021 07:22:03 +0000 (12:52 +0530)]
crypto/octeontx2: support UDP encapsulation

Adding UDP encapsulation support for IPsec in
lookaside protocol mode.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agocryptodev: support multiple cipher data-units
Matan Azrad [Wed, 14 Apr 2021 20:21:58 +0000 (22:21 +0200)]
cryptodev: support multiple cipher data-units

In cryptography, a block cipher is a deterministic algorithm operating
on fixed-length groups of bits, called blocks.

A block cipher consists of two paired algorithms, one for encryption
and the other for decryption. Both algorithms accept two inputs:
an input block of size n bits and a key of size k bits; and both yield
an n-bit output block. The decryption algorithm is defined to be the
inverse function of the encryption.

For AES standard the block size is 16 bytes.
For AES in XTS mode, the data to be encrypted\decrypted does not have to
be multiple of 16B size, the unit of data is called data-unit.
The data-unit size can be any size in range [16B, 2^24B], so, in this
case, a data stream is divided into N amount of equal data-units and
must be encrypted\decrypted in the same data-unit resolution.

For ABI compatibility reason, the size is limited to 64K (16-bit field).
The new field dataunit_len is inserted in a struct padding hole,
which is only 2 bytes long in 32-bit build.
It could be moved and extended later during an ABI-breakage window.

The current cryptodev API doesn't allow the user to select a specific
data-unit length supported by the devices.
In addition, there is no definition how the IV is detected per data-unit
when single operation includes more than one data-unit.

That causes applications to use single operation per data-unit even though
all the data is continuous in memory what reduces datapath performance.

Add a new feature flag to support multiple data-unit sizes, called
RTE_CRYPTODEV_FF_CIPHER_MULTIPLE_DATA_UNITS.
Add a new field in cipher capability, called dataunit_set,
where the devices can report the range of the supported data-unit sizes.
Add a new cipher transformation field, called dataunit_len, where the user
can select the data-unit length for all the operations.

All the new fields do not change the size of their structures,
by filling some struct padding holes.
They are added as exceptions in the ABI check file libabigail.abignore.

Using a bitmap to report the supported data-unit sizes capability allows
the devices to report a range simply as same as the user to read it
simply. also, thus sizes are usually common and probably will be shared
among different devices.

Signed-off-by: Matan Azrad <matan@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agocrypto/qat: fix offset for out-of-place scatter-gather
Arek Kusztal [Thu, 18 Mar 2021 13:16:17 +0000 (13:16 +0000)]
crypto/qat: fix offset for out-of-place scatter-gather

This commit fixes problem with to small offset when both offsets
(auth, cipher) are non zero in digest encrypt case,
when using out-of-place and sgl.

Fixes: 40002f6c2a24 ("crypto/qat: extend support for digest-encrypted auth-cipher")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
3 years agocrypto/qat: support single-pass GMAC on GEN3
Adam Dybkowski [Wed, 14 Apr 2021 11:33:21 +0000 (12:33 +0100)]
crypto/qat: support single-pass GMAC on GEN3

This patch implements Single-Pass AES-GMAC possible on QAT GEN3
which improves the performance. On GEN1 and GEN2 the previous
chained method is used.

Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
3 years agoapp/crypto-perf: close device after benchmark run
Adam Dybkowski [Fri, 9 Apr 2021 12:13:01 +0000 (13:13 +0100)]
app/crypto-perf: close device after benchmark run

This patch adds closing of the PMD after running the benchmark.

Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agotest/crypto: close device after tests
Adam Dybkowski [Fri, 9 Apr 2021 12:13:00 +0000 (13:13 +0100)]
test/crypto: close device after tests

This patch adds closing of the PMD after running the tests.

Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agoexamples/l2fwd-crypto: fix packet length while decryption
Rohit Raj [Fri, 9 Apr 2021 13:14:59 +0000 (18:44 +0530)]
examples/l2fwd-crypto: fix packet length while decryption

There were some padding left when a packet gets decrypted. This
patch removes those padding.
This patch also removes the padding left after verifying auth of
the packet.

Fixes: e2cdfbd07c8a ("examples/l2fwd-crypto: fix port id type")
Cc: stable@dpdk.org
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agoexamples/l2fwd-crypto: skip masked devices
Apeksha Gupta [Fri, 9 Apr 2021 13:09:14 +0000 (18:39 +0530)]
examples/l2fwd-crypto: skip masked devices

The devices which are masked by cryptodev mask should not be initialized
and skipped while traversing the device list.

Fixes: 6ae3fb9df66e ("examples/l2fwd-crypto: fix session mempool size")
Cc: stable@dpdk.org
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agoexamples/l2fwd-crypto: align private data size to cache size
Gagandeep Singh [Fri, 9 Apr 2021 12:56:21 +0000 (18:26 +0530)]
examples/l2fwd-crypto: align private data size to cache size

L2fwd-crypto is passing 24b private data size while packet
pool creation. This patch aligns that private data size
to cache line size for better performance results.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agodoc: update limitations of OCTEON TX crypto PMDs
Anoob Joseph [Fri, 26 Mar 2021 09:18:07 +0000 (14:48 +0530)]
doc: update limitations of OCTEON TX crypto PMDs

Update known limitations of OCTEON TX crypto PMDs.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
3 years agotest/crypto: add cases for block cipher encrypted digest
Tejasree Kondoj [Wed, 24 Mar 2021 16:45:08 +0000 (22:15 +0530)]
test/crypto: add cases for block cipher encrypted digest

Add test cases for block cipher DIGEST_ENCRYPTED mode.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agocommon/cpt: support encrypted digest mode
Tejasree Kondoj [Wed, 24 Mar 2021 16:45:07 +0000 (22:15 +0530)]
common/cpt: support encrypted digest mode

Added support for DIGEST_ENCRYPTED mode for octeontx
and octeontx2 platforms.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agocrypto/octeontx2: remove useless union member
Tejasree Kondoj [Mon, 15 Mar 2021 10:34:06 +0000 (16:04 +0530)]
crypto/octeontx2: remove useless union member

Removing redundant field in a union.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
3 years agodoc: fix dpdk-graph-crypto-perf dependencies
Ciara Power [Mon, 1 Mar 2021 11:28:31 +0000 (11:28 +0000)]
doc: fix dpdk-graph-crypto-perf dependencies

The script dependencies list was incomplete,
this patch adds missing modules and removes an unnecessary entry.
The installation command was also added.

Fixes: f400e0b82bf1 ("app/crypto-perf: add script to graph perf results")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agocrypto/octeontx: fix session-less mode
Ankur Dwivedi [Mon, 1 Mar 2021 05:59:55 +0000 (11:29 +0530)]
crypto/octeontx: fix session-less mode

A temporary session is created for sessionless crypto operations.
rte_cryptodev_sym_session_create() should be used for creating the
temporary session as it initializes the session structure in the
correct way.

Fixes: caeba5062c39 ("crypto/octeontx: improve symmetric session-less path")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
3 years agobbdev: add explicit enum for code block mode
Nicolas Chautru [Sat, 20 Feb 2021 00:15:05 +0000 (16:15 -0800)]
bbdev: add explicit enum for code block mode

Using explicit enum instead of ambiguous integer value

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
3 years agoci: bump ABI reference version
David Marchand [Thu, 15 Apr 2021 19:43:02 +0000 (21:43 +0200)]
ci: bump ABI reference version

When bumping DPDK version, we should have bumped the ABI reference too.

Fixes: 442155f70c6b ("version: 21.05-rc0")

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
3 years agoci: fix ABI reference generation
David Marchand [Thu, 15 Apr 2021 19:43:01 +0000 (21:43 +0200)]
ci: fix ABI reference generation

The machine=generic is not understood by older version of dpdk.
It is directly passed to gcc as -march=generic.

Since DPDK requires SSE 4.2, this results in an error when configuring
v21.02 sources for generating the reference ABI.

From GHA [1] logs:

"""
Compiler for C supports arguments -Wundef: YES
Compiler for C supports arguments -Wwrite-strings: YES
Compiler for C supports arguments -Wno-address-of-packed-member
-Waddress-of-packed-member: NO
Compiler for C supports arguments -Wno-packed-not-aligned
-Wpacked-not-aligned: NO
Compiler for C supports arguments -Wno-missing-field-initializers
-Wmissing-field-initializers: YES

config/x86/meson.build:14:6: ERROR:  Could not get define '__SSE4_2__'

A full log can be found at
/home/runner/work/dpdk/dpdk-v21.02/build/meson-logs/meson-log.txt
Error: Process completed with exit code 1.
"""

1: https://github.com/ovsrobot/dpdk/runs/2355005702

Stick to a compatible configuration passing -Dmachine=default.

Note: the breakage was not seen earlier this week as I guess the CI
workers are using a cached ABI reference for v20.11.

Fixes: 5b3a6ca6fd28 ("build: alias default build as generic")

Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
3 years agopower: fix closing frequency file
Anatoly Burakov [Wed, 14 Apr 2021 10:07:00 +0000 (10:07 +0000)]
power: fix closing frequency file

Currently, we open the system base frequency file, but never close it,
which results in a memory leak.

Coverity issue: 369693
Fixes: 8a5febaac4f7 ("power: fix P-state base frequency handling")

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
3 years agopower: remove redundant close of frequency file
Anatoly Burakov [Wed, 7 Apr 2021 15:56:42 +0000 (15:56 +0000)]
power: remove redundant close of frequency file

Previous fix has addressed the incorrect handling of `base_frequency`
file, but has added a use-after-free error due to the fact that all
further code paths will lead to an `fclose()` call at the end, so the
additional `fclose()` call right after processing the file was
unnecessary.

Coverity issue: 369901
Fixes: 8a5febaac4f7 ("power: fix P-state base frequency handling")

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Liang Ma <liangma@liangbit.com>
Acked-by: David Hunt <david.hunt@intel.com>
3 years agoconfig/arm: fix implementer and its SoCs
Juraj Linkeš [Wed, 14 Apr 2021 13:41:36 +0000 (15:41 +0200)]
config/arm: fix implementer and its SoCs

Fix the implementer and part number of DPAA and ARMADA SoCs.
The current values of 16 cores and 1 NUMA node don't cover all SoCs from
the Arm implementer, e.g. Taishan 2280 has 64 cores and 4 NUMA nodes.
Increase these to 64 and 4 to widen the coverage.
Also increase the neoverse-n1 MAX_LCORE and MAX_NUMA_NODES to reflect
new available hardware (Amplere Altra).
Add configuration to SoC options where smaller values are needed.

Fixes: 6ec78c2463ac ("build: add meson support for dpaaX platforms")
Fixes: dd1cd845c102 ("config: add Marvell ARMADA based on armv8-a")
Fixes: d97108a33231 ("config: change defaults of armv8")

Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
3 years agoconfig/arm: add platform config option
Juraj Linkeš [Wed, 14 Apr 2021 13:41:35 +0000 (15:41 +0200)]
config/arm: add platform config option

Add Arm SoC configuration sets to Arm meson.build and add an arch
agnostic meson option, 'platform', to select from these SoC
configurations for meson native builds. This is preferable to
specifying a cross file when doing aarch64 -> aarch64 builds, since the
cross file specifies the toolchain as well.

Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
3 years agoconfig: enable/disable drivers in Arm builds
Juraj Linkeš [Wed, 14 Apr 2021 13:41:34 +0000 (15:41 +0200)]
config: enable/disable drivers in Arm builds

Add support for enabling or disabling drivers for Arm cross build. Do
not implement any enable/disable lists yet.

Enabling drivers is useful when building for an SoC where we only want
to build a few drivers. That way the list won't be too long.

Similarly, disabling drivers is useful when we want to disable only a
few drivers.

Both of these are advantageous mainly in aarch64 -> aarch64 (or arch ->
same arch) builds, where the build machine may have the required driver
dependencies, yet we don't want to build drivers for a specific SoC.

If enable_drivers is a non-empty list, build only those drivers,
otherwise build all drivers and add them to enable_drivers.  If
disable_drivers is non-empty list, build all drivers specified in
enable_drivers except those in disable_drivers.

There are two drivers, bus/pci and bus/vdev, which break the build if
not enabled. Address this by always enabling these if the user disables
them or doesn't specify in their allowlist.

Also remove the old Makefile arm configuration options which don't do
anything in Meson.

Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
3 years agoeal: add C++ include guard for reciprocal header
Tyler Retzlaff [Wed, 17 Mar 2021 16:14:12 +0000 (09:14 -0700)]
eal: add C++ include guard for reciprocal header

Add missing extern "C" linkage for rte_reciprocal.h consistent with
other eal headers.

Fixes: ffe3ec811ef5 ("sched: introduce reciprocal divide")
Cc: stable@dpdk.org
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: David Marchand <david.marchand@redhat.com>
3 years agoraw/octeontx2_dma: assign PCI device in DPI VF
Radha Mohan Chintakuntla [Fri, 9 Apr 2021 08:06:27 +0000 (01:06 -0700)]
raw/octeontx2_dma: assign PCI device in DPI VF

The PCI device address is being used for sending mailbox which was
introduced in previous commit which replaced the macros so that
multiple DPI blocks in the hardware can be supported.

This patch fixes a NULL pointer access by assigning the PCI device
structure to dpivf.

Fixes: 4495bd887d38 ("raw/octeontx2_dma: support multiple DPI blocks")
Cc: stable@dpdk.org
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
3 years agonet: provide IP-related API on any OS
Dmitry Kozlyuk [Sat, 10 Apr 2021 22:47:32 +0000 (01:47 +0300)]
net: provide IP-related API on any OS

Users of <rte_ip.h> relied on it to provide IP-related defines,
like IPPROTO_* constants, but still had to include POSIX headers
for inet_pton() and other standard IP-related facilities.

Extend <rte_ip.h> so that it is a single header to gain access
to IP-related facilities on any OS. Use it to replace POSIX includes
in components enabled on Windows. Move missing constants from Windows
networking shim to OS shim header and include it where needed.

Remove Windows networking shim that is no longer needed.

Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
3 years agonet: work around s_addr macro on Windows
Dmitry Kozlyuk [Sat, 10 Apr 2021 22:47:31 +0000 (01:47 +0300)]
net: work around s_addr macro on Windows

Windows Sockets headers contain `#define s_addr S_un.S_addr`, which
conflicts with definition of `s_addr` field of `struct rte_ether_hdr`.
Prieviously `s_addr` was undefined in <rte_ether.h>, which had been
breaking access to `s_addr` field of `struct in_addr`, so some DPDK
and Windows headers could not be included in one file.

Renaming of `struct rte_ether_hdr` is planned:
https://mails.dpdk.org/archives/dev/2021-March/201444.html

Temporarily disable `s_addr` macro around `struct rte_ether_hdr`
definition to avoid conflict. Place source MAC address in both `s_addr`
and `S_un.S_addr` fields, so that access works either directly or
through the macro as defined in Windows headers.

Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
3 years agoeal: make OS shims internal
Dmitry Kozlyuk [Sat, 10 Apr 2021 22:47:30 +0000 (01:47 +0300)]
eal: make OS shims internal

DPDK code often relies on functions and macros that are not standard C,
but are found on all platforms, even if by slightly different names.
Windows <rte_os.h> provided macros or inline definitions for such symbols.
However, when placed in public header, these symbols were unnecessarily
exposed, breaking consumer POSIX compatibility code.

Move most of the shims to <rte_os_shim.h>, a header to be used instead
of <rte_os.h> by internal code. Include it in libraries and PMDs that
previously imported shims from <rte_os.h>. Directly replace shims that
were only used inside EAL:
* index -> strchr, rindex -> strrchr
* sleep -> rte_delay_us_sleep
* strerror_r -> strerror_s

Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
3 years agoeal/windows: hide asprintf shim
Dmitry Kozlyuk [Sat, 10 Apr 2021 22:47:29 +0000 (01:47 +0300)]
eal/windows: hide asprintf shim

Make asprintf(3) implementation for Windows private to EAL, so that it's
hidden from external consumers. It is not exposed to internal consumers
either, because they don't need asprintf() and also because callers from
other modules would have no reliable way to free allocated memory.

Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Khoa To <khot@microsoft.com>
Acked-by: Nick Connolly <nick.connolly@mayadata.io>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
3 years agokvargs: add get by key
Xueming Li [Tue, 13 Apr 2021 03:14:10 +0000 (03:14 +0000)]
kvargs: add get by key

Adds a new function to get value of a specific key from kvargs list.

Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Gaetan Rivet <grive@u256.net>
3 years agodevargs: fix memory leak on parsing failure
Xueming Li [Tue, 13 Apr 2021 03:14:09 +0000 (03:14 +0000)]
devargs: fix memory leak on parsing failure

This patch fixes memory leak in parsing error handling.

Fixes: 338327d731e6 ("devargs: add function to parse device layers")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Gaetan Rivet <grive@u256.net>
3 years agodevargs: unify scratch buffer storage
Xueming Li [Tue, 13 Apr 2021 03:14:08 +0000 (03:14 +0000)]
devargs: unify scratch buffer storage

In current design, legacy parser rte_devargs_parse() saved scratch
buffer to devargs.args while new parser rte_devargs_layers_parse() saved
to devargs.data. Code using devargs had to know the difference and
cleaned up memory accordingly - error prone.

This patch unifies scratch buffer to data field, introduces
rte_devargs_reset() function to wrap the memory clean up logic.

Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Reviewed-by: Gaetan Rivet <grive@u256.net>
3 years agopflock: add phase-fair reader writer locks
Stephen Hemminger [Fri, 2 Apr 2021 01:42:47 +0000 (18:42 -0700)]
pflock: add phase-fair reader writer locks

This is a new type of reader-writer lock that provides better fairness
guarantees which better suited for typical DPDK applications.
A pflock has two ticket pools, one for readers and one
for writers.

Phase-fair reader writer locks ensure that neither reader nor writer will
be starved.
Neither reader or writer are preferred, they execute in alternating
phases.
All operations of the same type (reader or writer) that acquire the lock
are handled in FIFO order.
Write operations are exclusive, and multiple read operations can be run
together (until a write arrives).

A similar implementation is in Concurrency Kit package in FreeBSD.
For more information see:
   "Reader-Writer Synchronization for Shared-Memory Multiprocessor
    Real-Time Systems",
    http://www.cs.unc.edu/~anderson/papers/ecrts09b.pdf

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
3 years agotest/trace: fix race on collected perf data
Feifei Wang [Wed, 10 Mar 2021 02:15:27 +0000 (10:15 +0800)]
test/trace: fix race on collected perf data

The measure_perf function should be executed after worker threads exit
to collect correct perf data. Otherwise, while workers are running, the
main thread may get incomplete data from workers.

In the meanwhile, remove unnecessary barrier in the test.
For signal variables "ldata.done" and "ldata.start", no operations
should keep the order that being executed after them. So the wmb after
them can be moved.

Fixes: 16a277a24c9f ("test/trace: add performance test cases")
Cc: stable@dpdk.org
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
3 years agotest: take test names from command line
Bruce Richardson [Wed, 27 Jan 2021 17:42:55 +0000 (17:42 +0000)]
test: take test names from command line

While having the ability to run a test based off the DPDK_TEST
environment variable is useful, it's sometimes more convenient to
specify the test name as a commandline parameter to a test binary.
This patch adds support for checking all parameters after the EAL ones, and
running all valid autotests requested - either from DPDK_TEST or on the
commandline. This also allows multiple tests to be run in a single
automated session, which is useful for working with components which have
multiple test suites.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
3 years agoeventdev: fix build on RHEL 7
Pavan Nikhilesh [Tue, 13 Apr 2021 22:16:12 +0000 (03:46 +0530)]
eventdev: fix build on RHEL 7

Since queue identifier is passed as signed integer, a compilation error
is generated:
rte_event_eth_rx_adapter.c:1810:57: error: signed and unsigned type
in conditional expression [-Werror=sign-compare]
Make queue identifier as unsigned when adding it to vector data.

Bugzilla ID: 672
Fixes: d7c428e557ba ("eventdev: support Rx adapter event vector")

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
3 years agoeal: do not redefine asm keyword in C++
Tyler Retzlaff [Wed, 24 Mar 2021 04:26:51 +0000 (21:26 -0700)]
eal: do not redefine asm keyword in C++

C++ forbids redefining a keyword as a macro.
The keyword asm is conditionally-supported and implementation defined,
but it seems our best guess.

In C, if asm does not exist, it is defined as __asm__
which is a GNU extension.

Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
3 years agolicense: fix typos
Ferruh Yigit [Fri, 9 Apr 2021 15:53:56 +0000 (16:53 +0100)]
license: fix typos

Fixes: a4862c9e1a98 ("license: introduce SPDX identifiers")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>