dpdk.git
6 years agorawdev: add firmware management
Shreyansh Jain [Wed, 31 Jan 2018 09:13:13 +0000 (14:43 +0530)]
rawdev: add firmware management

Some generic operations for firmware management can loading, unloading,
starting, stopping and querying firmware of a device.

This patch adds support for such generic operations.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
6 years agorawdev: add extended stats
Shreyansh Jain [Wed, 31 Jan 2018 09:13:12 +0000 (14:43 +0530)]
rawdev: add extended stats

Generic rawdev library cannot define a pre-defined set of stats
for devices which are yet to be defined.

This patch introduces the xstats support for rawdev so that any
implementation can create its own statistics.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
6 years agorawdev: add buffer stream IO
Shreyansh Jain [Wed, 31 Jan 2018 09:13:11 +0000 (14:43 +0530)]
rawdev: add buffer stream IO

Introduce handlers for raw buffer enqueue and dequeue. A raw buffer
is essentially a void object which is transparently passed via the
library onto the driver.

Using a context field as argument, any arbitrary meta information
can be passed by application to the driver/implementation. This can
be any data on which driver needs to define the operation semantics.
For example, passing along a queue identifier can suggest the driver
the queue context to perform I/O on.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
6 years agorawdev: add attribute get and set
Shreyansh Jain [Wed, 31 Jan 2018 09:13:10 +0000 (14:43 +0530)]
rawdev: add attribute get and set

A rawdevice can have various attributes. This patch introduce support
for transparently setting attribute value or getting current attribute
state. This is done by allowing an opaque set of key and value to be
passed through rawdev library.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
6 years agorawdev: introduce raw device library
Shreyansh Jain [Wed, 31 Jan 2018 09:13:09 +0000 (14:43 +0530)]
rawdev: introduce raw device library

Each device in DPDK has a type associated with it - ethernet, crypto,
event etc. This patch introduces 'rawdevice' which is a generic
type of device, not currently handled out-of-the-box by DPDK.

A device which can be scanned on an installed bus (pci, fslmc, ...)
or instantiated through devargs, can be interfaced using
standardized APIs just like other standardized devices.

This library introduces an API set which can be plugged on the
northbound side to the application layer, and on the southbound side
to the driver layer.

The APIs of rawdev library exposes some generic operations which can
enable configuration and I/O with the raw devices. Using opaque
data (pointer) as API arguments, library allows a high flexibility
for application and driver implementation.

This patch introduces basic device operations like start, stop, reset,
queue and info support.
Subsequent patches would introduce other operations like buffer
enqueue/dequeue and firmware support.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
6 years agonet/dpaa: further push mode optimizations
Nipun Gupta [Tue, 23 Jan 2018 12:27:07 +0000 (17:57 +0530)]
net/dpaa: further push mode optimizations

This patch supports batch processing of multiple packets
in the Rx side

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agobus/dpaa: check portal presence in the caller function
Nipun Gupta [Tue, 23 Jan 2018 12:27:06 +0000 (17:57 +0530)]
bus/dpaa: check portal presence in the caller function

In the I/O path we were calling rte_dpaa_portal_init which
internally checks if a portal is affined to the core.
But this lead to calling of that non-static API in every call.

Instead check the portal affinity in the caller itself for
performance reasons

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agonet/dpaa: use address translation optimizations
Hemant Agrawal [Tue, 23 Jan 2018 12:27:05 +0000 (17:57 +0530)]
net/dpaa: use address translation optimizations

Use the optimized routine for phy to virt conversion,
when the mempool is allocated from physical contiguous memory.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agobus/dpaa: fix port order shuffling
Shreyansh Jain [Tue, 23 Jan 2018 12:27:04 +0000 (17:57 +0530)]
bus/dpaa: fix port order shuffling

While scanning for devices, the order in which devices appear is
different as compared to MAC sequence.
This can cause confusion for users and automated scripts.
This patch create a sorted list of devices.

Fixes: 919eeaccb2ba ("bus/dpaa: introduce NXP DPAA bus driver skeleton")
Cc: stable@dpdk.org
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agomempool/dpaa: fix address translation optimization
Hemant Agrawal [Tue, 23 Jan 2018 12:27:03 +0000 (17:57 +0530)]
mempool/dpaa: fix address translation optimization

Fixes: 83a4f267f2e3 ("mempool/dpaa: optimize phy to virt conversion")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agobus/dpaa: allocate qman portals in thread safe manner
Nipun Gupta [Tue, 23 Jan 2018 12:27:02 +0000 (17:57 +0530)]
bus/dpaa: allocate qman portals in thread safe manner

Fixes: 9d32ef0f5d61 ("bus/dpaa: support creating dynamic HW portal")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agobus/dpaa: check flag in qman multi enqueue
Nipun Gupta [Tue, 23 Jan 2018 12:27:01 +0000 (17:57 +0530)]
bus/dpaa: check flag in qman multi enqueue

A caller may/may not pass the flags in qman enqueue multi API.
This patch adds a check on that flag and only accesses it if passed
by the caller.

Fixes: 43797e7b4774 ("bus/dpaa: support event dequeue and consumption")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agoeal/arm64: fix instrinsic for GCC < 4.9
Yongseok Koh [Wed, 31 Jan 2018 00:07:08 +0000 (16:07 -0800)]
eal/arm64: fix instrinsic for GCC < 4.9

vceqzq_u32() is being used by mlx5 PMD but added since gcc 4.9.

Fixes: 570acdb1da8a ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
6 years agovhost: fix build with old kernels
Zhihong Wang [Wed, 31 Jan 2018 14:20:57 +0000 (09:20 -0500)]
vhost: fix build with old kernels

This patch fixes compile failure with old kernels which have no
VIRTIO_F_ANY_LAYOUT defined.

Fixes: 5a8bb6e9020f ("vhost: claim to support any layout feature")

Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
6 years agoevent/opdl: fix dereference before null check
Liang Ma [Wed, 24 Jan 2018 15:05:51 +0000 (15:05 +0000)]
event/opdl: fix dereference before null check

Coverity issue: 257022
Fixes: 4236ce9bf5bf ("event/opdl: add OPDL ring infrastructure library")

Signed-off-by: Liang Ma <liang.j.ma@intel.com>
6 years agoevent/opdl: fix resource leak
Liang Ma [Wed, 24 Jan 2018 15:05:50 +0000 (15:05 +0000)]
event/opdl: fix resource leak

Coverity issue: 257004
Fixes: d548ef513cd7 ("event/opdl: add unit tests")

Signed-off-by: Liang Ma <liang.j.ma@intel.com>
6 years agonet/dpaa2: prefetch the annotation in event processing
Nipun Gupta [Tue, 23 Jan 2018 14:17:53 +0000 (19:47 +0530)]
net/dpaa2: prefetch the annotation in event processing

This patch adds software prefetching of the annotation which is
accessed by the driver to fetch the parsing results. The changes
also include as many instructions in between prefetching memory
and using it.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
6 years agoevent/dpaa2: prefetch the next DQRR entry
Nipun Gupta [Tue, 23 Jan 2018 14:17:52 +0000 (19:47 +0530)]
event/dpaa2: prefetch the next DQRR entry

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
6 years agobus/fslmc: add function to prefetch next DQRR entry
Nipun Gupta [Tue, 23 Jan 2018 14:17:51 +0000 (19:47 +0530)]
bus/fslmc: add function to prefetch next DQRR entry

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agoapp/eventdev: fix port dequeue depth configuration
Pavan Nikhilesh [Wed, 24 Jan 2018 09:30:33 +0000 (15:00 +0530)]
app/eventdev: fix port dequeue depth configuration

The port dequeue depth value has to be compared against the maximum
allowed dequeue depth reported by the event drivers.

Fixes: 3617aae53f92 ("app/eventdev: add event Rx adapter setup")

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
6 years agoevent/sw: support dynamic logging
Harry van Haaren [Thu, 25 Jan 2018 09:46:22 +0000 (09:46 +0000)]
event/sw: support dynamic logging

This commit enables dynamic logging with the SW pmd.
The string "pmd.event.sw" is used to change the verbosity
of the logging output, as per the newly defined log naming.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
6 years agonet/vmxnet3: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:10 +0000 (09:01 +0000)]
net/vmxnet3: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/virtio: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:09 +0000 (09:01 +0000)]
net/virtio: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/thunderx: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:08 +0000 (09:01 +0000)]
net/thunderx: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Note that the "nicvf" term has been replaced with "thunderx",
as the naming scheme defines that a PMD name should be the
same as the directory that it lives in: drivers/net/thunderx

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/qede: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:07 +0000 (09:01 +0000)]
net/qede: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/nfp: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:06 +0000 (09:01 +0000)]
net/nfp: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/liquidio: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:05 +0000 (09:01 +0000)]
net/liquidio: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Note that the "lio" term has been replaced with "liquidio",
as the naming scheme defines that a PMD name should be the
same as the directory that it lives in: drivers/net/liquidio

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/ixgbe: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:04 +0000 (09:01 +0000)]
net/ixgbe: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/i40e: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:03 +0000 (09:01 +0000)]
net/i40e: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/fm10k: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:02 +0000 (09:01 +0000)]
net/fm10k: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/enic: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:01 +0000 (09:01 +0000)]
net/enic: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/ena: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:01:00 +0000 (09:01 +0000)]
net/ena: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/e1000: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:00:59 +0000 (09:00 +0000)]
net/e1000: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/avp: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:00:58 +0000 (09:00 +0000)]
net/avp: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/avf: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:00:57 +0000 (09:00 +0000)]
net/avf: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agoevent/opdl: align dynamic log name with standard
Harry van Haaren [Thu, 25 Jan 2018 09:00:54 +0000 (09:00 +0000)]
event/opdl: align dynamic log name with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Liang Ma <liang.j.ma@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agodrivers/octeontx: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:00:55 +0000 (09:00 +0000)]
drivers/octeontx: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agodrivers/bbdev: align dynamic log names with standard
Harry van Haaren [Thu, 25 Jan 2018 09:00:56 +0000 (09:00 +0000)]
drivers/bbdev: align dynamic log names with standard

This commit aligns the names for dynamic logging with
the newly defined logging format.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agodoc: describe dynamic logging format
Harry van Haaren [Thu, 25 Jan 2018 09:00:53 +0000 (09:00 +0000)]
doc: describe dynamic logging format

This commit adds a section to the DPDK style guide to set
the dynamic logging formatting naming scheme.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agobus/fslmc: fix DPCI compare in scan
Shreyansh Jain [Tue, 30 Jan 2018 15:06:21 +0000 (20:36 +0530)]
bus/fslmc: fix DPCI compare in scan

Incorrect string length was being compared while scanning DPCI object.

Fixes: 828d51d8fc3e ("bus/fslmc: refactor scan and probe functions")

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
6 years agonet/dpaa2: fix BPID offset
Hemant Agrawal [Tue, 30 Jan 2018 15:06:20 +0000 (20:36 +0530)]
net/dpaa2: fix BPID offset

Fixes: 774e9ea91992 ("net/dpaa2: add support for multi seg buffers")
Fixes: d2ef05d5c13e ("net/dpaa2: optimize Rx/Tx path")

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agoconfig: reduce DPAA2 mbuf headroom size to 128
Hemant Agrawal [Tue, 30 Jan 2018 15:06:19 +0000 (20:36 +0530)]
config: reduce DPAA2 mbuf headroom size to 128

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
6 years agoeal: fix default mempool ops
Pavan Nikhilesh [Tue, 30 Jan 2018 15:57:47 +0000 (21:27 +0530)]
eal: fix default mempool ops

If '--mbuf-pool-ops' is not passed to EAL as command line argument then
rte_eal_mbuf_default_mempool_ops will return NULL.

Instead check if internal_config.user_mbuf_pool_ops_name is NULL and
return compile time RTE_MBUF_DEFAULT_MEMPOOL_OPS.

Fixes: 8b0f7f43413 ("mbuf: maintain user and compile time mempool ops name")

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
6 years agotest/debug: fix EAL cleanup when forking
Harry van Haaren [Tue, 30 Jan 2018 18:26:09 +0000 (18:26 +0000)]
test/debug: fix EAL cleanup when forking

Before this patch, the debug_autotest would call fork(),
call rte_panic() or rte_exit() in the child process, and
examine the return code to verify that rte_panic() and
rte_exit() were correctly reporting failures.

With the inclusion of the rte_eal_cleanup() patch, rte_exit()
was modified to cleanly tear-down EAL allocations. Currently
only one library (service cores) is allocated by EAL at startup
and should be cleaned up. This library has a check on a normal
(non-hugepage) variable to protect against double cleanup. The
service cores finalize() function itself frees back hugepage mem.

Given the fork() approach from the unit test, and the fact that
the double-free check is on an ordinary variable, causes multiple
child processed (fork()-ed from the unit-test runner) to attempt
to free the huge-page memory multiple times. The variable to
protect against double-cleanup was not effective, as the fork()
would restore it to show initialized in the next child.

The solution is to call rte_service_finalize() *before* calling
fork(), which results in the service cores double-cleanup variable
to be zero before the fork(), and hence the child processes never
free the hugepage service-cores memory (correct behavior, as the
unit-test suite is still running, and owns the hugepages).

Fixes: aec9c13c5257 ("eal: add function to release internal resources")

Reported-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
6 years agomk: support renamed Makefile in external project
Marko Kovacevic [Mon, 22 Jan 2018 10:59:05 +0000 (10:59 +0000)]
mk: support renamed Makefile in external project

The build system made a recursive call to "make" after
creating the build directory. This recursive call used
the hard-coded filename "Makefile", which prevented
builds from working if the file was renamed and make
called using "make -f". Taking the filename from
MAKEFILES_LIST make variable fixes this.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
6 years agotest: build more test cases with meson
Bruce Richardson [Tue, 30 Jan 2018 14:41:26 +0000 (14:41 +0000)]
test: build more test cases with meson

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
6 years agodrivers: improve pmdinfo generation with meson
Bruce Richardson [Thu, 25 Jan 2018 11:14:43 +0000 (11:14 +0000)]
drivers: improve pmdinfo generation with meson

Since meson 0.44, changing any file inside a PMD directory (quite
correctly) triggers a full re-run of meson on build, rather than an
incremental build as with earlier versions. This rerun is needed because
we use "grep" in meson to search for files on which to run pmdinfogen, and
changing any of those files means that grep and, therefore meson, needs to
be rerun. [Previous versions of meson did not track this dependency on the
grep command, and so did incremental builds only.]

If, however, we take advantage of pmdinfogen's ability to use stdin and
stdout instead of files, we can instead use a shell script to process an
entire static archive and generate a single .c file from it. This
eliminates the need for grep, and means that changes to a PMD file only
need an incremental build - a significant time saving.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agodoc: add meson build to release notes
Bruce Richardson [Mon, 22 Jan 2018 15:14:13 +0000 (15:14 +0000)]
doc: add meson build to release notes

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
6 years agobuild: set compat lib as universal dependency
Bruce Richardson [Mon, 22 Jan 2018 15:42:54 +0000 (15:42 +0000)]
build: set compat lib as universal dependency

By making "compat" lib (which consists of a header only) a dependency of
the EAL, we make the header file available to all other libs, drivers and
apps, and thereby make it less work to do ABI versioning.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: support vendor specific ARM cross builds
Pavan Nikhilesh [Mon, 22 Jan 2018 15:26:31 +0000 (20:56 +0530)]
build: support vendor specific ARM cross builds

Add various vendor specific cross build targets.
This can be verified by using linaro toolchain and running

   meson build --cross-file config/arm/arm64_<cpu>_<platform>_<compiler>

In future more cross build targets can be added.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
6 years agobuild: detect micro-arch on ARM
Pavan Nikhilesh [Mon, 22 Jan 2018 15:26:30 +0000 (20:56 +0530)]
build: detect micro-arch on ARM

Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
6 years agobuild: support ARM with meson
Bruce Richardson [Mon, 22 Jan 2018 15:26:29 +0000 (20:56 +0530)]
build: support ARM with meson

Add files to enable compiling for ARM native/cross builds.
This can be tested by doing a cross-compile for armv8-a type using
the linaro gcc toolchain.

        meson arm-build --cross-file aarch64_cross.txt
        ninja -C arm-build

where aarch64_cross.txt contained the following

        [binaries]
        c = 'aarch64-linux-gnu-gcc'
        cpp = 'aarch64-linux-gnu-cpp'
        ar = 'aarch64-linux-gnu-ar'

        [host_machine]
        system = 'linux'
        cpu_family = 'aarch64'
        cpu = 'armv8-a'
        endian = 'little'

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
6 years agotest: build more test cases with meson
Kevin Laatz [Wed, 20 Dec 2017 12:06:21 +0000 (12:06 +0000)]
test: build more test cases with meson

This commit adds most of the remaining tests to the meson build.
They can be run using test binary as normal, or via "ninja test".

Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
6 years agoapp/eventdev: build with meson
Pavan Nikhilesh [Fri, 19 Jan 2018 18:15:21 +0000 (23:45 +0530)]
app/eventdev: build with meson

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agoevent/octeontx: build with meson
Pavan Nikhilesh [Fri, 19 Jan 2018 18:15:20 +0000 (23:45 +0530)]
event/octeontx: build with meson

Add Cavium octeontx to meson build and change order of drivers built
from event->mempool->net to mempool->net->event to resolve dependency.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agodrivers/net: build Cavium NIC PMDs with meson
Pavan Nikhilesh [Fri, 19 Jan 2018 18:15:19 +0000 (23:45 +0530)]
drivers/net: build Cavium NIC PMDs with meson

Add Cavium octeontx and thunder nicvf to meson build infrastructure.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agomempool/octeontx: build with meson
Pavan Nikhilesh [Fri, 19 Jan 2018 18:15:18 +0000 (23:45 +0530)]
mempool/octeontx: build with meson

Add octeontx hardware mempool driver to meson build.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agodoc: add instructions on build using meson
Bruce Richardson [Wed, 10 Jan 2018 15:24:57 +0000 (15:24 +0000)]
doc: add instructions on build using meson

Add a document describing how to configure, build and install DPDK using
meson and ninja. Document includes references to official installation docs
using make, and points out the experimental nature of the build.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agotest: build app with meson as dpdk-test
Harry van Haaren [Wed, 20 Dec 2017 11:16:32 +0000 (11:16 +0000)]
test: build app with meson as dpdk-test

This patch enables the test/test app to be built. It also adds
the test binary to be a meson-test, which allows the meson test
infrastructure to be used to run tests.

Tests are listed using the same test binary, however each test
sets a different DPDK_TEST environment variable. The string contents
of this DPDK_TEST env var is entered in the command line interface.
As such, the familiar test names such as "ring_perf_autotest" etc
are valid tests to run using this meson test infrastructure.

Note that the tests are run serially, given that we cannot run
multiple primary processes at a time. As each test must initialize
EAL this takes some time depending on the number of hugepages.
In future, we could improve this to run multiple tests from one
EAL init, but it is out of scope for this patchset.

Finally, an option to build the tests is added to the meson build
options. When disabled, the unit test code in test/test is not
compiled. The default is set to 'true'. To disable, run:

$ meson configure -Dtests=false

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agonet/pcap: fix cross compilation with meson
Bruce Richardson [Fri, 15 Dec 2017 17:19:26 +0000 (17:19 +0000)]
net/pcap: fix cross compilation with meson

The detection of pcap as a dependency involves invoking pcap-config to get
parameters - something not possible in a cross-compilation environment.
Therefore we need to just look for the presence of the library in a
cross-compilation environment and assume if the library is present we can
compile and link against it.

Fixes: efd5d1a8d8dd ("drivers/net: build some vdev PMDs with meson")

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: remove architecture flag as default C flag
Bruce Richardson [Fri, 15 Dec 2017 17:12:43 +0000 (17:12 +0000)]
build: remove architecture flag as default C flag

Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.

Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: replace license text with SPDX tag
Bruce Richardson [Mon, 18 Dec 2017 15:56:25 +0000 (15:56 +0000)]
build: replace license text with SPDX tag

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
6 years agoexamples: enable linking both static and shared
Bruce Richardson [Thu, 7 Dec 2017 15:51:41 +0000 (15:51 +0000)]
examples: enable linking both static and shared

Since the DPDK build now includes both static and shared libraries, we need
a new way to enable building the examples using either method from the one
installation. To do this, we add in a default "shared" target, and a
separate "static" target which links in the DPDK static libraries. In both
cases, the final application name is symlinked to the last-built static or
shared target, with both binaries able to co-exist in the build directory.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: symlink drivers to library directory
Bruce Richardson [Wed, 6 Dec 2017 10:45:48 +0000 (10:45 +0000)]
build: symlink drivers to library directory

With the introduction of bus drivers, we now have a situation where
driver libraries will start to depend upon each other. Because of this,
the driver libs need to be discoverable by the dynamic loader.

There are three options to fix this:
1. Force the user to put the $libdir/dpdk/drivers folder into their
library path.
2. Move all libraries from drivers sub-directory to $libdir.
3. Symlink all libraries from the subfolder to the main library dir.

Option 1 is not great for usability or distro packaging, and option 2
means that we can't have EAL load all drivers from a known path
automatically (as it would error out on non-PMD libs), so option 3 was
chosen as the best fix. The only downside is that on a "ninja uninstall"
the symlinks are not removed, as they are unknown to meson/ninja.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: change default library type to static
Bruce Richardson [Mon, 4 Dec 2017 15:00:33 +0000 (15:00 +0000)]
build: change default library type to static

Now that we always build both static and shared libraries, the default
library type only applies to apps and examples. To avoid issues with
paths when doing actual development with DPDK, change the default app
build to static. This makes sure that testpmd, and any examples built as
part of a development build, are runnable without being installed.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: build as both static and shared libs
Bruce Richardson [Fri, 3 Nov 2017 17:27:32 +0000 (17:27 +0000)]
build: build as both static and shared libs

This patch changes the build process to group all .o files for a driver or
library into a static archive first, and then link the .o files together
into a shared library. This eliminates the need for separate static or
shared object builds when packaging, for instance.

The "default_library" configuration option now only affects the apps and
examples, which are either linked against the static or shared library
versions depending on the value of the option.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agoeal: fix list of source files in meson build
Bruce Richardson [Fri, 3 Nov 2017 17:26:45 +0000 (17:26 +0000)]
eal: fix list of source files in meson build

Header files should not be listed in the sources list.

Fixes: 844514c73569 ("eal: build with meson")

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: remove library special cases
Bruce Richardson [Fri, 3 Nov 2017 14:47:43 +0000 (14:47 +0000)]
build: remove library special cases

The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.

By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.

Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agoexamples: use pkg-config in makefiles
Bruce Richardson [Mon, 9 Oct 2017 13:13:16 +0000 (14:13 +0100)]
examples: use pkg-config in makefiles

Change the example app Makefiles to query if DPDK is installed and
registered using pkg-config. If so, build directly using pkg-config info,
otherwise fall back to using the original build system with RTE_SDK and
RTE_TARGET

This commit changes the makefiles for the basic examples, i.e. those which
do not have multiple subdirectories underneath the main examples dir.
Examples not covered are:

* ethtool
* multi_process
* performance-thread
* quota_watermark
* netmap_compat
* server_node_efd
* vm_power_manager

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
6 years agoexamples: put app name and sources at top of makefiles
Bruce Richardson [Mon, 25 Sep 2017 16:28:49 +0000 (17:28 +0100)]
examples: put app name and sources at top of makefiles

Reorder the text in the makefiles, so that the app name and the source
files are listed first. This then will allow them to be shared later in a
combined makefile building with pkg-config and RTE_SDK-based build system.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
6 years agoexamples: build some samples with meson
Bruce Richardson [Tue, 12 Sep 2017 15:42:02 +0000 (16:42 +0100)]
examples: build some samples with meson

Add support for having selected example apps built as part of a meson,
ninja build. By default none are built, and those to be built should be
named directly in the -Dexamples='' meson configuration argument.

This is useful for developers working on a feature who want to use a
suitable example, or examples, to test that feature, as they can compile
everything up in one go, and run the example without having to do a ninja
install first.

This commit adds examples which don't consist of multiple apps in
subdirectories to the meson build, so they can be built by default by
passing -Dexamples parameter to meson.

Not included are the following examples:
* ethtool
* multi-process
* netmap_compat
* performance-thread
* quota_watermark
* server_node_efd
* vm_power_manager

To test the apps added here, use the following command, merged to one line,
to add them to your meson build (command to be run inside the build
directory):

meson configure -Dexamples=bbdev_app,bond,cmdline,distributor,\
eventdev_pipeline_sw_pmd, exception_path,helloworld,\
ip_fragmentation,ip_pipeline,ip_reassembly, ipsec-secgw,\
ipv4_multicast,kni,l2fwd-cat,l2fwd-crypto,l2fwd-jobstats,\
l2fwd-keepalive,l2fwd,l3fwd-acl,l3fwd-power,l3fwd-vf,l3fwd,\
link_status_interrupt,load_balancer,packet_ordering,ptpclient,\
qos_meter,qos_sched,rxtx_callbacks,skeleton,tep_termination,\
timer,vhost,vhost_scsi,vmdq,vmdq_dcb

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
6 years agonet/bonding: build with meson
Bruce Richardson [Wed, 13 Sep 2017 15:07:32 +0000 (16:07 +0100)]
net/bonding: build with meson

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
6 years agodrivers/event: build skeleton and SW drivers with meson
Bruce Richardson [Thu, 7 Sep 2017 15:06:58 +0000 (16:06 +0100)]
drivers/event: build skeleton and SW drivers with meson

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
6 years agolpm: install vector header files with meson
Bruce Richardson [Thu, 12 Oct 2017 10:50:28 +0000 (11:50 +0100)]
lpm: install vector header files with meson

The main rte_lpm.h header file also includes architecture specific headers,
depending on the architecture on which it is used. These also need to be
installed into the include directory as part of the "ninja install"
process. Thankfully, since the vector headers all have different names we
can just install all 3 of them in all cases, which avoids conflicts or
issues with multi-architecture installs, or the need to use
architecture-specific subdirectories.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: detect and use libnuma
Bruce Richardson [Thu, 12 Oct 2017 14:02:27 +0000 (15:02 +0100)]
build: detect and use libnuma

DPDK has an optional dependency on libnuma, so manage that through the
build system, by dynamically detecting the presence of the needed library
and header files. Since this library is used by both EAL and vhost, check
for the presence at the top level in the config directory.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: add maths library in pkg-config file
Bruce Richardson [Fri, 6 Oct 2017 10:43:11 +0000 (11:43 +0100)]
build: add maths library in pkg-config file

Since a number of libraries depend on the maths lib, as well as adding it
to the project args, we also need to add it to the pkgconfig file args.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
6 years agoeal/bsd: build modules with meson
Bruce Richardson [Thu, 21 Sep 2017 14:54:53 +0000 (15:54 +0100)]
eal/bsd: build modules with meson

Support compiling the FreeBSD kernel modules using meson and ninja.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
6 years agoapp/testpmd: fix rpath for drivers in meson build
Timothy Redaelli [Wed, 20 Sep 2017 16:41:28 +0000 (18:41 +0200)]
app/testpmd: fix rpath for drivers in meson build

This commit fixes the setting of relative rpath on dpdk-testpmd for
drivers ($libdir/dpdk/drivers) to the correct absolute rpath
($prefix$libdir/dpdk/drivers)

Fixes: a25a650be5f0 ("build: add infrastructure for meson and ninja builds")

Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agobuild/x86: add SSE flags
Bruce Richardson [Thu, 14 Sep 2017 11:11:20 +0000 (12:11 +0100)]
build/x86: add SSE flags

Previous code only added in AVX, and a few other non-SSE flags to the
compile-time cpuflags because all SSE instruction set levels are now
required for an x86 build. However, some apps may still be checking for the
existing SSE ones in the legacy build system, so add them here for
completeness and compatibility.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: fix driver install path
Bruce Richardson [Wed, 20 Sep 2017 10:40:15 +0000 (11:40 +0100)]
build: fix driver install path

To comply with the "hier" standard [Ref: man 7 hier], the driver .so files
should not be placed in $datadir. Therefore we install them in a
sub-directory of $libdir instead.

Fixes: a25a650be5f0 ("build: add infrastructure for meson and ninja builds")

Reported-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agobuild: sort meson options alphabetically
Bruce Richardson [Wed, 20 Sep 2017 10:28:55 +0000 (11:28 +0100)]
build: sort meson options alphabetically

Wrap each entry at the description value to avoid really long lines also.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
6 years agoeal: do not hard-code install path with meson
Luca Boccassi [Fri, 15 Sep 2017 17:36:12 +0000 (18:36 +0100)]
eal: do not hard-code install path with meson

Instead of hard-coding the install path of generic and exec-env headers
use the includedir option, so that it can be correctly overridden.

Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agobuild: add optional arch-specific headers install path
Luca Boccassi [Fri, 15 Sep 2017 17:36:11 +0000 (18:36 +0100)]
build: add optional arch-specific headers install path

A subset of the dpdk headers are arch-dependent, but have common names
and thus cause a clash in a multiarch installation.
For example, rte_config.h is different for each target.

Add a "include_subdir_arch"  option to allow a user to specify a
subdirectory for arch independent headers to fix multiarch support.

Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agobuild: rename pkgconfig to libdpdk.pc
Luca Boccassi [Fri, 15 Sep 2017 17:36:10 +0000 (18:36 +0100)]
build: rename pkgconfig to libdpdk.pc

In Debian and Ubuntu we have been shipping a pkgconfig file for DPDK
for more than a year now, and the filename is libdpdk.pc.
A few downstream projects, like OVS and Collectd, have adopted the
use of libdpdk.pc in their build systems as well.
In order to maintain backward compatibility, rename the file from
DPDK.pc to libdpdk.pc.

Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agodoc: describe how to add new components
Bruce Richardson [Thu, 31 Aug 2017 16:10:16 +0000 (17:10 +0100)]
doc: describe how to add new components

Add to the contributors guide details on how to add libraries and drivers
and integrate them with the DPDK build system(s).

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agobuild: add option to version libs using DPDK version
Bruce Richardson [Thu, 31 Aug 2017 10:36:43 +0000 (11:36 +0100)]
build: add option to version libs using DPDK version

Normally, each library has it's own version number based on the ABI.
Add an option to have all libs just use the DPDK version number as the
.so version.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agousertools: install with meson
Bruce Richardson [Wed, 30 Aug 2017 14:29:15 +0000 (15:29 +0100)]
usertools: install with meson

Have the "usertools" scripts installed when doing a DPDK install using
ninja. They will be copies to $prefix/bin, generally /usr/local/bin,
alongside testpmd.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agoapp/testpmd: build with meson
Bruce Richardson [Wed, 30 Aug 2017 13:38:34 +0000 (14:38 +0100)]
app/testpmd: build with meson

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agodrivers/net: build Intel NIC PMDs with meson
Bruce Richardson [Wed, 30 Aug 2017 11:31:35 +0000 (12:31 +0100)]
drivers/net: build Intel NIC PMDs with meson

Add the e1000, fm10k, i40e and ixgbe drivers to the meson & ninja build.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agodrivers/net: build some vdev PMDs with meson
Bruce Richardson [Wed, 30 Aug 2017 10:18:49 +0000 (11:18 +0100)]
drivers/net: build some vdev PMDs with meson

Add the af_packet, null, pcap and ring PMDs to the meson build.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agodrivers/net: add meson build infrastructure
Bruce Richardson [Wed, 30 Aug 2017 09:05:59 +0000 (10:05 +0100)]
drivers/net: add meson build infrastructure

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agocrypto/qat: build with meson
Bruce Richardson [Wed, 30 Aug 2017 09:00:46 +0000 (10:00 +0100)]
crypto/qat: build with meson

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agocrypto/openssl: build with meson
Bruce Richardson [Wed, 30 Aug 2017 08:50:20 +0000 (09:50 +0100)]
crypto/openssl: build with meson

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agocrypto/null: build with meson
Bruce Richardson [Tue, 29 Aug 2017 16:20:14 +0000 (17:20 +0100)]
crypto/null: build with meson

Add in a crypto driver class, and implement compiling the null crypto
instance.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agodrivers/mempool: build SW drivers with meson
Bruce Richardson [Tue, 29 Aug 2017 15:32:27 +0000 (16:32 +0100)]
drivers/mempool: build SW drivers with meson

With build infrastructure in place, add in mempool drivers to the build.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agobus/vdev: build with meson
Bruce Richardson [Wed, 15 Nov 2017 23:31:46 +0000 (23:31 +0000)]
bus/vdev: build with meson

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agobus/pci: build with meson
Bruce Richardson [Wed, 1 Nov 2017 11:23:03 +0000 (11:23 +0000)]
bus/pci: build with meson

Many drivers across the various device types rely on PCI infrastructure,
so the bus drivers should be the first driver class built.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
6 years agodrivers: add infrastructure for meson build
Bruce Richardson [Tue, 29 Aug 2017 13:49:45 +0000 (14:49 +0100)]
drivers: add infrastructure for meson build

Add in the top-level drivers meson.build file to start adding in building
of PMDs. Since all PMDs are built in pretty much the same way, the logic
for building each PMD, including extracting the pmdinfo, is included in the
top level build file. This means that each individual driver class only
needs to specify its default dependencies and a few naming conventions, and
each driver only needs to specify it's source files, headers, etc.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agobuildtools: build with meson
Bruce Richardson [Tue, 29 Aug 2017 13:39:32 +0000 (14:39 +0100)]
buildtools: build with meson

Add the buildtools folder, and more specifically the pmdinfogen binary to
the meson and ninja build. This will be needed for building the PMDs in the
driver folder later, as the pmd info output from the tool needs to be
included in those libs.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
6 years agolib: build with meson
Bruce Richardson [Tue, 17 Oct 2017 12:43:57 +0000 (13:43 +0100)]
lib: build with meson

Add non-EAL libraries to DPDK build. The compat lib is a special case,
along with the previously-added EAL, but all other libs can be build using
the same set of commands, where the individual meson.build files only need
to specify their dependencies, source files, header files and ABI versions.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>