net/ice/base: separate NVM version struct

The ice_nvm_info structure has become somewhat of a dumping ground for
all of the fields related to flash version. It holds the NVM version and
EETRACK id, the OptionROM info structure, the flash size, the ShadowRAM
size, and more.

A future change is going to add the ability to read the NVM version and
EETRACK ID from the inactive NVM bank. To make this simpler, it is
useful to have these NVM version info fields extracted to their own
structure.

Rename ice_nvm_info into ice_flash_info, and create a separate
ice_nvm_info structure that will contain the eetrack and NVM map
version. Move the netlist_ver structure into ice_flash_info and rename it
ice_netlist_info for consistency.

Modify the static ice_get_orom_ver_info to take the option rom structure
as a pointer. This makes it more obvious what portion of the hw struct
is being modified. Do the same for ice_get_netlist_ver_info.

Introduce a new ice_get_nvm_ver_info function, which will be similar to
ice_get_orom_ver_info and ice_get_netlist_ver_info, used to keep the NVM
version extraction code co-located.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: enable QinQ filter for switch advanced rule

Enable QinQ type filter for switch advanced rule, it support tunnel
and non-tunnel packet use external and inner vlan id as input set
for rules, it also support session id as input set for PPPoE rule
with QinQ flag in packet.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: adjust rate limit profile ids runtime database

Moving the runtime profile ids database/storage to the hw structure.

Signed-off-by: Shibin Koikkara Reeny <shibin.koikkara.reeny@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: change misc ACL style

This is a collection of minor ACL style changes including:

- When there is nothing to unroll, return a value directly.
- Return ICE_SUCCESS(0) in cases where an error was previously checked
  so ICE_SUCCESS is the only possible return.
- Remove unnecessary parentheses and newlines
- Move unroll of allocation to end of function and use goto on errors to
  free.
- Fix function header comment style
- Remove 'else' from an 'if else' condition where both conditions return
  a value to reduce indentation.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: preserve NVM capabilities in safe mode

If the driver initializes in safe mode, it will call
ice_set_safe_mode_caps. This results in clearing the capabilities
structures, in order to set them up for operating in safe mode, ensuring
many features are disabled.

This has a side effect of also clearing the capability bits that relate
to NVM update. The result is that the device driver will not indicate
support for unified update, even if the firmware is capable.

Fix this by adding the relevant capability fields to the list of values
we preserve. To simplify the code, use a common_cap structure instead of
a handful of local variables. To reduce some duplication of the
capability name, introduce a couple of macros used to restore the
capabilities values from the cached copy.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: remove function ACL count query

Remove debug function ice_aq_query_acl_cntrs.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: remove repeated words

A new test in checkpatch detects repeated words; cleanup all pre-existing
occurrences of those now.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: check failed acts allocation

There is no check for failed allocation of 'acts'. Add a check and
return if memory was not successfully allocated. Also, as all 'goto out'
occur after this check there is no need to perform a check for 'acts' as
we will have returned if it is not set.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: move a function

Move ice_flow_get_hw_prof, this is not necessary for DPDK, just
sync the code with other compile option which ice_flow_get_hw_prof
is declared as a static function.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: clear advanced rules in reset preparation

Clear advanced rules from SW and HW before reset.

Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: move a function

The only caller of this function is within the file so mark it as static
and move it up in the file to avoid a forward declaration.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: filter for GTPU outer IP without inner IP

Add ptype MAC_IPV4_GTPU into
ice_ptypes_ipv4_ofos, ice_ptypes_ipv4_ofos_all and ice_ipv4_ofos_no_l4

Add ptype MAC_IPV6_GTPU into
ice_ptypes_ipv6_ofos, ice_ptypes_ipv6_ofos_all and ice_ipv6_ofos_no_l4

Add ptype MAC_IPV4_GTPU and MAC_IPV6_GTPU into
the new ice_ptypes_gtpu_no_ip

So outer IP can be configured as input set for GTPU packet that without
inner IP layer.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support outer IP filter for GTPC

Add ptype MAC_IPV4_GTPC_TEID and MAC_IPV4_GTPC into
ice_ptypes_ipv4_ofos, ice_ptypes_ipv4_ofos_all and ice_ipv4_ofos_no_l4

Add ptype MAC_IPV6_GTPC_TEID and MAC_IPV6_GTPC into
ice_ptypes_ipv6_ofos, ice_ptypes_ipv6_ofos_all and ice_ipv6_ofos_no_l4

So outer IP can be configured as input set for GTPC packet.

Also add MAC_IPV4_GTPC_TEID and MAC_IPV6_GTPC_TEID into
ice_ptypes_gtpc, so when ICE_FLOW_SEG_HDR_GTPC is requested, it can
take effect on all GTPC packets (with or without TEID).

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: refactor DCB related variables

In this patch, the DCB related variables will be refactored out of the
ice_port_info_struct. The goal is to make the ice_port_info struct
cleaner.

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: reduce profile to recip info get from firmware

Only need to get profile_to_recip info from firmware for
profiles used by switch, no need for other free profile
in order that we can reduce the time consumed when
download a switch rule.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: introduce Tx rate limiting on port level

The PSM Configuration has a Rate Limiter for each associated
switch port based on its relative speed from the total BW of
switch ports connected to LAN controller. The rate limiters
will be dynamic get readjusted if switch port speeds are
changed at the root node layer of the scheduler tree. Adding
a function to directly modify the EIR of root node.

Signed-off-by: Shibin Koikkara Reeny <shibin.koikkara.reeny@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: join format strings to same line

When printing messages with ice_debug, align the printed string to the
origin line of the message in order to ease debugging and tracking
messages back to their source.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: support GTP-U type switch rule

This patch add support for GTP-U type of switch rule.
It enable all GTP-U related ptype.

Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add AQ LLDP filter control command

As of NVM ver 1.7.1 there is a new AQ command to add and remove
LLDP filters for Rx flow.  This patch implements the support
structure to implement this functionality.

Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: fix abbreviations

Correct abbreviations as identified by abbrevcheck

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: introduce and use for each bit iterator

A number of code flows iterate over a block of memory to do something
for every bit set in that memory. Use existing bit operations in a new
iterator macro to make those code flows cleaner.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: add function header

Add a function header for ice_cfg_phy_fc()

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: introduce and use bitmap hamming weight API

Introduce ice_bitmap_hweight() and use it instead of open-coding that
functionality.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: introduce and use bitmap set API

Introduce ice_bitmap_set() and use it instead of open-coding that
functionality.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: replace single-element array hack

Convert the pre-C90-extension "C struct hack" method (using a single-
element array at the end of a structure for implementing variable-length
types) to the preferred use of C99 flexible array member.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: silence static analysis warning

Sparse warns about these casts to/from restricted types which are not
actual problems; silence the warnings.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: cleanup misleading comment

The maximum Admin Queue buffer size and NVM shadow RAM sector size are
both 4 Kilobytes. Some comments refer to those as 4Kb which can be
confused with 4 Kilobits.
Update the comments to use the commonly used KB symbol instead.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: clean code wrapping

To make the wrapping a little cleaner, move the variables only applicable
to ICE_FC_AUTO into that case. Also move caching of the value to only occur
on success.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: cleanup stack hog

In ice_flow_add_prof_sync(), struct ice_flow_prof_params has recently
grown in size hogging stack space when allocated there.
Hogging stack space should be avoided. Change allocation to be on the
heap when needed.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: fix issues around move nodes

1. Fixed the max children check when moving the last(8th) children. This
   allows the parent node to hold 8 children instead of 7.
2. Check whether the VSI is already part of the given aggregator subtree
   before moving it.

Fixes: 29a0c11489ef ("net/ice/base: clean code")
Cc: stable@dpdk.org
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: avoid single-member variable-length structs

There are a number of structures that consist of a one-element array as the
only struct member.  Some of those are unused (ice_aqc_add_get_recipe_data,
ice_aqc_get_port_options_data, ice_aqc_dis_txq, etc.) so remove them.
Others are used to index into a buffer/array consisting of a variable
number of a different data or structure type.  Those are unnecessary since
we can use simple pointer arithmetic or index directly into the buffer to
access individual elements of the buffer/array.

Additional code cleanups were done near areas affected by this change.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: split capabilities discovering

Using the new ice_aq_list_caps and ice_parse_(dev|func)_caps functions,
replace ice_discover_caps with two functions that each take a pointer to
the dev_caps and func_caps structures respectively.

This makes the side effect of updating the hw->dev_caps and
hw->func_caps obvious from reading the implementation of the function.
Additionally, it opens the way for enabling reading of device
capabilities outside of the initialization flow. By passing in
a pointer, another caller will be able to read the capabilities without
modifying the hw capabilities structures.

As there are no other callers, it is safe to now remove
ice_aq_discover_caps and ice_parse_caps.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/ice/base: handle error gracefully in HW table calloc

In the ice_init_hw_tbls API, if the ice_calloc for es->written
fails, catch that error and bail out gracefully, instead of
continuing with a NULL pointer.

Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/bnxt: improve vector Tx

Improve performance of vector burst transmit function by processing
multiple packets per inner loop iteration.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: handle multiple packets per loop in vector Rx

Process four receive descriptors per inner loop in vector mode
burst receive functions.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: optimize vector path mbuf allocation

Simplify and optimize receive mbuf allocation function used
by the vector mode PMDs.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: use table based mbuf flags handling

Use table to translate receive descriptor status flags to
rte_mbuf ol_flags values.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: use table based packet type translation

Use table-based method for translating receive packet descriptor
flags into rte_mbuf packet type values.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: increase max burst size for vector path

Increase the maximum supported burst size for the bnxt vector
mode PMD from 32 to 64.

With larger burst sizes, per-burst overhead is amortized over more
packets, improving overall performance. For small packets this has
been measured to provide a 4-10% increase in single-core throughput
with testpmd iofwd.

Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: reduce CQ queue size without aggregation ring

Don't allocate extra completion queue entries for aggregation
ring when aggregation ring will not be used.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: improve small ring sizes support

Improve support for small ring sizes:
   - Ensure that transmit free threshold is no more than 1/4 ring size.
   - Ensure that receive free threshold is no more than 1/4 ring size.
   - Validate requested ring sizes against minimum supported size.
   - Use rxq receive free threshold instead of fixed maximum burst
     size to trigger bulk receive buffer allocation.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: require async completion ring for vector path

Disable support for vector mode when async completions can be placed
in a receive completion ring and change the default for all platforms
to use a dedicated async completion ring.

Simplify completion handling in vector mode receive paths now that
it no longer needs to handle async completions.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: use appropriate type for Rx ring

Change the type of the software receive mbuf ring from an array
of structures containing an mbuf pointer to an array of pointers
to struct rte_mbuf for consistency with how this ring is currently
used by the vector mode receive function.

Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix getting burst mode for Arm

Transmit and receive burst mode get operations incorrectly return
"Vector SSE" on ARM64 platforms, change to return "Vector Neon"
instead.

Fixes: 398358341419 ("net/bnxt: support NEON")
Cc: stable@dpdk.org
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>

net/bnxt: fix freeing mbuf

We should use rte_pktmbuf_free() instead of rte_free() to free the mbuf.

Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/bnxt: remove logically dead code

This patch removes logically dead code reported by coverity.

Coverity issue: 360824
Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

net/iavf: fix command after PF reset

If PF reset is finished but VF reset is pending, VF should no need to
send any invalid cmd to PF. That would avoid mass unexpected behaviors
affecting the robust.

Fixes: 22b123a36d07 ("net/avf: initialize PMD")
Fixes: 9e03acd726cf ("net/iavf: fix flow access")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

common/iavf: add IPv6 prefix protocol header fields

Some IPv6 prefix related protocol header fields are defined in this
patch, so that we can use prefix instead of full IPv6 address for RSS.
Ref https://tools.ietf.org/html/rfc6052.

Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: support GTPC

Add GTPC header and its field selector.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: save max MTU received from PF

Most values from the VIRTCHNL_OP_GET_VF_RESOURCES are stored in the
iavf_hw_capabilities structure. Unfortunately, it seems that
max_mtu was missed. Add this member to the structure and save it when
parsing hw config.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: cleanup virtual channel code

1. use BIT to replace <<
2. move VIRTCHNL_VF_CAP_DCF to keep order
3. align the vc msg validate

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

common/iavf: use pad byte to specify MAC type

Currently, there is no way for a VF driver to specify that it wants to
change its device/primary unicast MAC address. This makes it
difficult/impossible for the PF driver to track the VF's device/primary
unicast MAC address, which is used for VM/VF reboot and displaying on
the host. Fix this by using 2 bits of a pad byte in the
virtchnl_ether_addr structure so the VF can specify what type of MAC
it's adding/deleting.

Below are the values that should be used by all VF drivers going
forward.

VIRTCHNL_ETHER_ADDR_LEGACY(0):
- The type should only ever be 0 for legacy AVF drivers (i.e.
  drivers that don't support the new type bits). The PF drivers
  will track VF's device/primary unicast MAC using with best
  effort.

VIRTCHNL_ETHER_ADDR_PRIMARY(1):
- This type should only be used when the VF is changing their
  device/primary unicast MAC. It should be used for both delete
  and add cases related to the device/primary unicast MAC.

VIRTCHNL_ETHER_ADDR_EXTRA(2):
- This type should be used when the VF is adding and/or deleting
  MAC addresses that are not the device/primary unicast MAC. For
  example, extra unicast addresses and multicast addresses
  assuming the PF supports "extra" addresses at all.

If a PF is parsing the type field of the virtchnl_ether_addr, then it
should use the VIRTCHNL_ETHER_ADDR_TYPE_MASK to mask the first two bits
of the type field since 0, 1, and 2 are the only valid values.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/ice: fix firmware version output

Kernel driver shows firmware version as hex but ice PMD shows
as decimal. This patch fixes the issue to make consistent with
kernel driver.

Fixes: f9204d8a23c3 ("net/ice: fix firmware version result of ethtool")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>

net/netvsc: replace compiler builtin overflow check

'__builtin_add_overflow' added to gcc in version 5, earlier versions
causing build error, like gcc 4.8.5 in RHEL7.

Replaced compiler builtin check with arithmetic check.

Fixes: 7838d3a6ae7a ("net/netvsc: check for overflow on packet info from host")

Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Tested-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

app/testpmd: count empty polls in 5-tuple swap engine

Enable empty polls in burst stats within 5tswap.c

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: enable burst stats for noisy VNF mode

Add burst stats for noisy VNF mode.

Fixes: 3c156061b938 ("app/testpmd: add noisy neighbour forwarding mode")
Cc: stable@dpdk.org
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: add record-burst-stats runtime config

Convert CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS to a
runtime configuration.

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

app/testpmd: add record-core-cycles runtime config

Convert CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES to a
runtime configuration.

Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

ethdev: remove underscore prefix from internal API

'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.

For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>

ethdev: use hairpin helper functions

Hairpin helper functions were not used by drivers, but it was used only
local to ethdev. They are:
'rte_eth_dev_is_rx_hairpin_queue()'
'rte_eth_dev_is_tx_hairpin_queue()'

Exposing them as internal APIs and update mlx5 driver (only user of
hairpin) to use them.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: mark internal functions

Some ethdev functions are for drivers only, not for applications.

Since we have '__rte_internal' tag available now, marking internal
functions with it and moving functions to INTERNAL section in linker
script.
This is also good for documenting the internal functions.

Some internal APIs seems marked as experimental, but it doesn't make
sense to have internals APIs as experimental, updating their tag and
doxygen comments.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: make device operations struct private

Hiding the 'struct eth_dev_ops' from applications.

Removing relevant deprecation notice.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: move inline device operations

This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.

Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.

Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.

To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.

The list of dev_ops moved:
eth_rx_queue_count_t       rx_queue_count;
eth_rx_descriptor_done_t   rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>

ethdev: deprecate descriptor status check API

Marking 'rte_eth_rx_descriptor_done()' API as deprecated.
``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
APIs can be used as replacement.

Plan is to remove the API on 21.11 release.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>

ethdev: remove redundant license text

Redundant BSD-3 license text removed, the licensing already documented
by "SPDX-License-Identifier: BSD-3-Clause" SPDX tag.

Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>

ethdev: mark all traffic manager API as experimental

This patch marks all traffic manager API as experimental as
per deprecation notice[1] and discussion[2] mentioned in following
threads.

[1] https://mails.dpdk.org/archives/dev/2020-May/166221.html
[2] https://mails.dpdk.org/archives/dev/2020-April/165364.html

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/mlx5: share Rx queue drop action code

Move Rx queue drop action similar resources allocations from Verbs
module to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx queue drop

Separate Rx queue drop creation into both Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx hash queue code

Move Rx hash queue object similar resources allocations from DevX and
Verbs modules to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx queue indirection table code

Move Rx indirection table object similar resources allocations from DevX
and Verbs modules to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: remove indirection table type field

Once the separation between Verbs and DevX is done using function
pointers, the type field of the indirection table structure becomes
redundant and no more code is used.
Remove the unnecessary field from the structure.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx hash queue creation

Separate Rx hash queue creation into both Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx indirection table object creation

Separate Rx indirection table object creation into both Verbs and DevX
modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx queue object modification

Use new modify_wq functions for Rx object creation in DevX and Verbs
modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx queue object modification

Separate Rx object modification to the Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: rearrange creation of WQ and CQ object

Rearrangement of WQ and CQ creation for Verbs Rx queue:
1. Rename the allocation function.
2. Reduce the number of arguments that the creation functions receive.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: rearrange creation of RQ and CQ resources

Rearrangement of RQ and CQ resource handling for DevX Rx queue:
1. Rename the allocation function so that it is understood that it
allocates all resources and not just the CQ or RQ.
2. Move the allocation and release of the doorbell into creation and
release functions.
3. Reduce the number of arguments that the creation functions receive.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: share Rx control code

Move Rx object similar resources allocations and debug logs from DevX
and Verbs modules to a shared location.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx interrupt handling

Separate interrupt event handler into both Verbs and DevX modules.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: separate Rx queue object creations

As an arrangement to Windows OS support, the Verbs operations should be
separated to another file.
By this way, the build can easily cut the unsupported Verbs APIs from
the compilation process.

Define operation structure and DevX module in addition to the existing
linux Verbs module.
Separate Rx object creation into the Verbs/DevX modules and update the
operation structure according to the OS support and the user
configuration.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: mitigate Rx queue reference counters

The Rx queue structures manage 2 different reference counter per queue:
rxq_ctrl reference counter and rxq_obj reference counter.

There is no real need to use two different counters, it just complicates
the release functions.
Remove the rxq_obj counter and use only the rxq_ctrl counter.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: fix types differentiation in Rx queue create

Rx HW objects can be created by both Verbs and DevX operations.
The management of the 2 types of operations are done directly in the
main flow of the object’s creations.

Some arrangements and validations were wrongly done to the irrelevant
type:

1. LRO related validations were done for Verbs type where LRO is not
supported at all.
2. Verbs allocation arrangements were done for DevX operations where it
is not needed.
3. Doorbell destroy was considered for Verbs types where it is
irrelevant.

Adjust the aforementioned points only for the relevant types.

Fixes: e79c9be91515 ("net/mlx5: support Rx hairpin queues")
Fixes: 08d1838f645a ("net/mlx5: implement CQ for Rx using DevX API")
Fixes: 17ed314c6c0b ("net/mlx5: allow LRO per Rx queue")
Fixes: dc9ceff73c99 ("net/mlx5: create advanced RxQ via DevX")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: fix Rx queue state update

In order to support DevX Rx queue stop and start operations, the state
of the queue should be updated in FW.
The state update PRM command requires to set both the current state and
the new requested state.

The current state and the new requested state fields setting were
wrongly switched.

Switch them back to the correct setting.

Fixes: 161d103b231c ("net/mlx5: add queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/mlx5: fix Rx hash queue creation error flow

The mlx5_hrxq_new function allocates several resources and if one of the
allocations fails, the function jumps to an error label where it
releases all the allocated resources.

When the TIR action creation fails, the hrxq memory is not released what
can cause a resource leak.

Add an appropriate release to the hrxq pointer in the error flow.

Fixes: 772dc0eb83d3 ("net/mlx5: convert hrxq to indexed")
Fixes: dc9ceff73c99 ("net/mlx5: create advanced RxQ via DevX")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

net/ark: remove Tx padding configuration macro

Replace behavior with RTE_LIBRTE_ARK_MIN_TX_PKTLEN
with a default value of 0.
Update documentation as needed.

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ark: replace compile time log config with runtime

Use ARK_PMD_LOG in place of PMD_DRV_LOG, PMD_DEBUG_LOG, PMD_FUNC_LOG,
PMD_STATS_LOG, PMD_RX_LOG, and PMD_TX_LOG.
Review and adjust log levels and messages as needed.

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/ice: fix flow validation for unsupported patterns

When loading the OS default package and the pipeline mode is enabled
by the "pipeline-mode-support=1" operation. In this case, the wrong
parser is selected for processing and it will cause the unsupported
patterns(pppoes/pfcp/l2tpv3/esp/ah) to be validated successfully.
This patch corrects the parser selection issue.

Fixes: 47d460d63233 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/iavf: refactor RSS

Current RSS implementation is not easy to scale and maintain.
The patch refactor the code base on below design:

1. iavf_pattern_match_item->input_set_mask is the superset of
   ETH_RSS_xxx.
2. iavf_pattern_match_item->meta is the virtchnl_proto_hdrs template.
3. iavf_hash_parse_pattern will generate pattern hint.
4. iavf_hash_parse_action will refine the virtchnl_proto_hdrs base on
   pattern hint and ETH_RSS_xxx.
5. The refine process include
   1) refine field selector of l2, l3, l4.
   2) insert gtpu proto_hdr at the beginning base on pattern hint.
   3) refine field selector for gtpu header.

The patch reduce the code from 4000+ line to less than 1000.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>

net/ice/base: fix outer IPv6 packet type table

ptype 264, 265, 266, 267, 275 should not be set
in ice_ptypes_ipv6_ofos_all.

Fixes: 88824213be8a ("net/ice/base: enable RSS for PFCP/L2TP/ESP/AH")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>

net/dpaa: support configuring RSS on runtime

With fmlib (FMCLESS) mode now RSS can be modified on runtime.
This patch add support for RSS update functions

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>

net/dpaa: support FMC parser for VSP

FMC tool generates and saves the setup in a file.
This patch help Parse the /tmp/fmc.bin generated by FMC to
setup RXQs for each port on FMC mode.
The parser gets the fqids and vspids from fmc.bin

Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: support virtual storage profile

This patch adds support for Virtual Storage profile (VSP) feature.
With VSP support when memory pool is created, the hw buffer pool id
i.e. bpid is not allocated; the bpid is identified by dpaa flow
create API.
The memory pool of RX queue is attached to specific BMan pool
according to the VSP ID when RX queue is setup.
For fmlib based hash queue, VSP base ID is assigned to each queue.

Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

bus/dpaa: add virtual storage profile port init

This patch add support to initialize the VSP ports
in the FMAN library.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

bus/dpaa: support shared MAC

A shared MAC interface is an interface which can be used
by both kernel and userspace based on classification configuration
It is defined in dts with the compatible string
"fsl,dpa-ethernet-shared" which bpool will be seeded by the dpdk
partition and configured as a netdev by the dpaa Linux eth driver.
User space buffers from the bpool will be kmapped by the kernel.

Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: support FMCless mode

This patch uses fmlib to configure the FMAN HW for flow
and distribution configuration, thus avoiding the need
for static FMC tool execution optionally.

Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: support VSP in fmlib

This patch adds support for VSP (Virtual Storage Profile)
in fmlib routines.
VSP allow a network interface to be divided into physical
and virtual instance(s).
The concept is very similar to SRIOV.

Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/dpaa: support fmlib

DPAA platorm MAC interface is known as FMAN i.e. Frame Manager.
There are two ways to control it.
1. Statically configure the queues and classification rules before the
start of the application using FMC tool.
2. Dynamically configure it within application by making API calls of
fmlib.

The fmlib or Frame Manager library provides an API on top of the
Frame Manager driver ioctl calls, that provides a user space application
with a simple way to configure driver parameters and PCD
(parse - classify - distribute) rules.

This patch integrates the base fmlib so that various queue config, RSS
and classification related features can be supported on DPAA platform.

Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/hns3: fix out of bounds access

This patch fixes (out-of-bounds access) coverity issue.

Coverity issue: 349932
Fixes: 7d7f9f80bbfb ("net/hns3: support MAC address related operations")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

net/iavf: downgrade error log

When receiving the unsupported AQ messages, it's taken as an
error. It's not appropriate and triggers too much unnecessary print.

Fixes: 22b123a36d07 ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>

net/iavf: fix setting of MAC address

When setting the MAC address, the ethdev layer copies the new mac
address in dev->data->mac_addrs[0] before calling the dev_ops.

Therefore, is_same_ether_addr(mac_addr, dev->data->mac_addrs) was
always true, and the MAC was never set. Remove this test to fix the
issue.

Fixes: 538da7a1cad2 ("net: add rte prefix to ether functions")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>