vt100: include pgmspace.h as we use PROGMEM macro

[aversive.git] / projects / microb2010 / mainboard / uart_config.h

diff --git a/projects/microb2010/mainboard/uart_config.h b/projects/microb2010/mainboard/uart_config.h
index dc6117a..52a083a 100644 (file)
--- a/projects/microb2010/mainboard/uart_config.h
+++ b/projects/microb2010/mainboard/uart_config.h
@@ -27,33 +27,33 @@
 #define UART_CONFIG_H\r
 \r
 /*\r
- * UART0 definitions\r
+ * UART2 definitions\r
  */\r
 \r
-/* compile uart0 fonctions, undefine it to pass compilation */\r
-#define UART0_COMPILE\r
+/* compile uart2 fonctions, undefine it to pass compilation */\r
+#define UART2_COMPILE\r
 \r
-/* enable uart0 if == 1, disable if == 0 */\r
-#define UART0_ENABLED  1\r
+/* enable uart2 if == 1, disable if == 0 */\r
+#define UART2_ENABLED  1\r
 \r
-/* enable uart0 interrupts if == 1, disable if == 0 */\r
-#define UART0_INTERRUPT_ENABLED  1\r
+/* enable uart2 interrupts if == 1, disable if == 0 */\r
+#define UART2_INTERRUPT_ENABLED  1\r
 \r
-#define UART0_BAUDRATE 57600\r
+#define UART2_BAUDRATE 57600\r
 \r
 /*\r
  * if you enable this, the maximum baudrate you can reach is\r
  * higher, but the precision is lower.\r
  */\r
-#define UART0_USE_DOUBLE_SPEED 1\r
+#define UART2_USE_DOUBLE_SPEED 1\r
 \r
-#define UART0_RX_FIFO_SIZE 64\r
-#define UART0_TX_FIFO_SIZE 64\r
-#define UART0_NBITS 8\r
+#define UART2_RX_FIFO_SIZE 64\r
+#define UART2_TX_FIFO_SIZE 64\r
+#define UART2_NBITS 8\r
 \r
-#define UART0_PARITY UART_PARTITY_NONE\r
+#define UART2_PARITY UART_PARTITY_NONE\r
 \r
-#define UART0_STOP_BIT UART_STOP_BITS_1\r
+#define UART2_STOP_BIT UART_STOP_BITS_1\r
 \r
 /*\r
  * UART1 definitions\r