microb_cmd

[aversive.git] / projects / microb2010 / tests / beacon_tsop / uart_config.h

diff --git a/projects/microb2010/tests/beacon_tsop/uart_config.h b/projects/microb2010/tests/beacon_tsop/uart_config.h
index 13e1af7..b6d70b3 100644 (file)
--- a/projects/microb2010/tests/beacon_tsop/uart_config.h
+++ b/projects/microb2010/tests/beacon_tsop/uart_config.h
@@ -64,6 +64,44 @@
 //#define UART0_STOP_BIT UART_STOP_BITS_2\r
 \r
 \r
+/*\r
+ * UART1 definitions \r
+ */\r
+\r
+/* compile uart1 fonctions, undefine it to pass compilation */\r
+#define UART1_COMPILE  \r
+\r
+/* enable uart1 if == 1, disable if == 0 */\r
+#define UART1_ENABLED  1\r
+\r
+/* enable uart1 interrupts if == 1, disable if == 0 */\r
+#define UART1_INTERRUPT_ENABLED  0\r
+\r
+#define UART1_BAUDRATE 57600\r
+\r
+/* \r
+ * if you enable this, the maximum baudrate you can reach is \r
+ * higher, but the precision is lower. \r
+ */\r
+#define UART1_USE_DOUBLE_SPEED 1\r
+//#define UART1_USE_DOUBLE_SPEED 1\r
+\r
+#define UART1_RX_FIFO_SIZE 4\r
+#define UART1_TX_FIFO_SIZE 1\r
+//#define UART1_NBITS 5\r
+//#define UART1_NBITS 6\r
+//#define UART1_NBITS 7\r
+#define UART1_NBITS 8\r
+//#define UART1_NBITS 9\r
+\r
+#define UART1_PARITY UART_PARTITY_NONE\r
+//#define UART1_PARITY UART_PARTITY_ODD\r
+//#define UART1_PARITY UART_PARTITY_EVEN\r
+\r
+#define UART1_STOP_BIT UART_STOP_BITS_1\r
+//#define UART1_STOP_BIT UART_STOP_BITS_2\r
+\r
+\r
 \r
 \r
 /* .... same for uart 1, 2, 3 ... */\r