#include <string.h>
#include <time.h>
#include <fcntl.h>
+#include <sys/mman.h>
#include <sys/types.h>
#include <errno.h>
#include <rte_cycles.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
#include <rte_launch.h>
#include <rte_eal.h>
#include <rte_alarm.h>
#include <rte_ethdev.h>
#include <rte_dev.h>
#include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_PMD_XENVIRT
-#include <rte_eth_xenvirt.h>
+#ifdef RTE_LIBRTE_IXGBE_PMD
+#include <rte_pmd_ixgbe.h>
#endif
#ifdef RTE_LIBRTE_PDUMP
#include <rte_pdump.h>
#include "testpmd.h"
uint16_t verbose_level = 0; /**< Silent by default. */
+int testpmd_logtype; /**< Log type for testpmd logs */
/* use master core for command line ? */
uint8_t interactive = 0;
uint8_t auto_start = 0;
+uint8_t tx_first;
+char cmdline_filename[PATH_MAX] = {0};
/*
* NUMA support configuration.
* probed ports among the CPU sockets 0 and 1.
* Otherwise, all memory is allocated from CPU socket 0.
*/
-uint8_t numa_support = 0; /**< No numa support by default */
+uint8_t numa_support = 1; /**< numa enabled by default */
/*
* In UMA mode,all memory is allocated from socket 0 if --socket-num is
&tx_only_engine,
&csum_fwd_engine,
&icmp_echo_engine,
+#if defined RTE_LIBRTE_PMD_SOFTNIC && defined RTE_LIBRTE_SCHED
+ &softnic_tm_engine,
+ &softnic_tm_bypass_engine,
+#endif
#ifdef RTE_LIBRTE_IEEE1588
&ieee1588_fwd_engine,
#endif
uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */
uint32_t param_total_num_mbufs = 0; /**< number of mbufs in all pools - if
* specified on command-line. */
+uint16_t stats_period; /**< Period to show statistics (disabled by default) */
+
+/*
+ * In container, it cannot terminate the process which running with 'stats-period'
+ * option. Set flag to exit stats period loop after received SIGINT/SIGTERM.
+ */
+uint8_t f_quit;
/*
* Configuration of packet segments used by the "txonly" processing engine.
*/
uint8_t no_flush_rx = 0; /* flush by default */
+/*
+ * Flow API isolated mode.
+ */
+uint8_t flow_isolate_all;
+
/*
* Avoids to check link status when starting/stopping a port.
*/
*/
uint8_t rmv_interrupt = 1; /* enabled by default */
+/*
+ * Display or mask ether events
+ * Default to all events except VF_MBOX
+ */
+uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
+ (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
+
/*
* NIC bypass mode configuration options.
*/
-#ifdef RTE_NIC_BYPASS
+#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
/* The NIC bypass watchdog timeout. */
-uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF;
-
+uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
#endif
+
#ifdef RTE_LIBRTE_LATENCY_STATS
/*
.hw_vlan_extend = 0, /**< Extended VLAN disabled. */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
.hw_strip_crc = 1, /**< CRC stripping by hardware enabled. */
+ .hw_timestamp = 0, /**< HW timestamp enabled. */
};
struct rte_fdir_conf fdir_conf = {
uint16_t nb_tx_queue_stats_mappings = 0;
uint16_t nb_rx_queue_stats_mappings = 0;
-unsigned max_socket = 0;
+/*
+ * Display zero values by default for xstats
+ */
+uint8_t xstats_hide_zero;
+unsigned int num_sockets = 0;
+unsigned int socket_ids[RTE_MAX_NUMA_NODES];
+
+#ifdef RTE_LIBRTE_BITRATE
/* Bitrate statistics */
struct rte_stats_bitrates *bitrate_data;
+lcoreid_t bitrate_lcore_id;
+uint8_t bitrate_enabled;
+#endif
+
+struct gro_status gro_ports[RTE_MAX_ETHPORTS];
+uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;
/* Forward function declarations */
-static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
+static void map_port_queue_stats_mapping_registers(portid_t pi,
+ struct rte_port *port);
static void check_all_ports_link_status(uint32_t port_mask);
-static void eth_event_callback(uint8_t port_id,
- enum rte_eth_event_type type,
- void *param);
+static int eth_event_callback(portid_t port_id,
+ enum rte_eth_event_type type,
+ void *param, void *ret_param);
/*
* Check if all the ports are started.
*/
static int all_ports_started(void);
+struct gso_status gso_ports[RTE_MAX_ETHPORTS];
+uint16_t gso_max_segment_size = ETHER_MAX_LEN - ETHER_CRC_LEN;
+
+/*
+ * Helper function to check if socket is already discovered.
+ * If yes, return positive value. If not, return zero.
+ */
+int
+new_socket_id(unsigned int socket_id)
+{
+ unsigned int i;
+
+ for (i = 0; i < num_sockets; i++) {
+ if (socket_ids[i] == socket_id)
+ return 0;
+ }
+ return 1;
+}
+
/*
* Setup default configuration.
*/
nb_lc = 0;
for (i = 0; i < RTE_MAX_LCORE; i++) {
- sock_num = rte_lcore_to_socket_id(i) + 1;
- if (sock_num > max_socket) {
- if (sock_num > RTE_MAX_NUMA_NODES)
- rte_exit(EXIT_FAILURE, "Total sockets greater than %u\n", RTE_MAX_NUMA_NODES);
- max_socket = sock_num;
+ sock_num = rte_lcore_to_socket_id(i);
+ if (new_socket_id(sock_num)) {
+ if (num_sockets >= RTE_MAX_NUMA_NODES) {
+ rte_exit(EXIT_FAILURE,
+ "Total sockets greater than %u\n",
+ RTE_MAX_NUMA_NODES);
+ }
+ socket_ids[num_sockets++] = sock_num;
}
if (!rte_lcore_is_enabled(i))
continue;
set_default_fwd_ports_config(void)
{
portid_t pt_id;
+ int i = 0;
- for (pt_id = 0; pt_id < nb_ports; pt_id++)
- fwd_ports_ids[pt_id] = pt_id;
+ RTE_ETH_FOREACH_DEV(pt_id)
+ fwd_ports_ids[i++] = pt_id;
nb_cfg_ports = nb_ports;
nb_fwd_ports = nb_ports;
mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name));
- RTE_LOG(INFO, USER1,
+ TESTPMD_LOG(INFO,
"create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
pool_name, nb_mbuf, mbuf_seg_size, socket_id);
-#ifdef RTE_LIBRTE_PMD_XENVIRT
- rte_mp = rte_mempool_gntalloc_create(pool_name, nb_mbuf, mb_size,
- (unsigned) mb_mempool_cache,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socket_id, 0);
-#endif
-
- /* if the former XEN allocation failed fall back to normal allocation */
- if (rte_mp == NULL) {
- if (mp_anon != 0) {
- rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf,
- mb_size, (unsigned) mb_mempool_cache,
- sizeof(struct rte_pktmbuf_pool_private),
- socket_id, 0);
- if (rte_mp == NULL)
- goto err;
-
- if (rte_mempool_populate_anon(rte_mp) == 0) {
- rte_mempool_free(rte_mp);
- rte_mp = NULL;
- goto err;
- }
- rte_pktmbuf_pool_init(rte_mp, NULL);
- rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
- } else {
- /* wrapper to rte_mempool_create() */
- rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
- mb_mempool_cache, 0, mbuf_seg_size, socket_id);
+ if (mp_anon != 0) {
+ rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf,
+ mb_size, (unsigned) mb_mempool_cache,
+ sizeof(struct rte_pktmbuf_pool_private),
+ socket_id, 0);
+ if (rte_mp == NULL)
+ goto err;
+
+ if (rte_mempool_populate_anon(rte_mp) == 0) {
+ rte_mempool_free(rte_mp);
+ rte_mp = NULL;
+ goto err;
}
+ rte_pktmbuf_pool_init(rte_mp, NULL);
+ rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
+ } else {
+ /* wrapper to rte_mempool_create() */
+ rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
+ mb_mempool_cache, 0, mbuf_seg_size, socket_id);
}
err:
{
static int warning_once = 0;
- if (socket_id >= max_socket) {
+ if (new_socket_id(socket_id)) {
if (!warning_once && numa_support)
printf("Warning: NUMA should be configured manually by"
" using --port-numa-config and"
unsigned int nb_mbuf_per_pool;
lcoreid_t lc_id;
uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
+ struct rte_gro_param gro_param;
+ uint32_t gso_types;
memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
+
+ if (numa_support) {
+ memset(port_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
+ memset(rxring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
+ memset(txring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
+ }
+
/* Configuration of logical cores. */
fwd_lcores = rte_zmalloc("testpmd: fwd_lcores",
sizeof(struct fwd_lcore *) * nb_lcores,
fwd_lcores[lc_id]->cpuid_idx = lc_id;
}
- /*
- * Create pools of mbuf.
- * If NUMA support is disabled, create a single pool of mbuf in
- * socket 0 memory by default.
- * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
- *
- * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
- * nb_txd can be configured at run time.
- */
- if (param_total_num_mbufs)
- nb_mbuf_per_pool = param_total_num_mbufs;
- else {
- nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX + (nb_lcores * mb_mempool_cache)
- + RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
-
- if (!numa_support)
- nb_mbuf_per_pool =
- (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
- }
-
- if (!numa_support) {
- if (socket_num == UMA_NO_CONFIG)
- mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
- else
- mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
- socket_num);
- }
-
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
rte_eth_dev_info_get(pid, &port->dev_info);
port->need_reconfig_queues = 1;
}
+ /*
+ * Create pools of mbuf.
+ * If NUMA support is disabled, create a single pool of mbuf in
+ * socket 0 memory by default.
+ * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
+ *
+ * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
+ * nb_txd can be configured at run time.
+ */
+ if (param_total_num_mbufs)
+ nb_mbuf_per_pool = param_total_num_mbufs;
+ else {
+ nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX +
+ (nb_lcores * mb_mempool_cache) +
+ RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
+ nb_mbuf_per_pool *= RTE_MAX_ETHPORTS;
+ }
+
if (numa_support) {
uint8_t i;
- unsigned int nb_mbuf;
- if (param_total_num_mbufs)
- nb_mbuf_per_pool = nb_mbuf_per_pool/nb_ports;
-
- for (i = 0; i < max_socket; i++) {
- nb_mbuf = (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
- if (nb_mbuf)
- mbuf_pool_create(mbuf_data_size,
- nb_mbuf,i);
- }
+ for (i = 0; i < num_sockets; i++)
+ mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
+ socket_ids[i]);
+ } else {
+ if (socket_num == UMA_NO_CONFIG)
+ mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
+ else
+ mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
+ socket_num);
}
+
init_port_config();
+ gso_types = DEV_TX_OFFLOAD_TCP_TSO | DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
+ DEV_TX_OFFLOAD_GRE_TNL_TSO;
/*
* Records which Mbuf pool to use by each logical core, if needed.
*/
if (mbp == NULL)
mbp = mbuf_pool_find(0);
fwd_lcores[lc_id]->mbp = mbp;
+ /* initialize GSO context */
+ fwd_lcores[lc_id]->gso_ctx.direct_pool = mbp;
+ fwd_lcores[lc_id]->gso_ctx.indirect_pool = mbp;
+ fwd_lcores[lc_id]->gso_ctx.gso_types = gso_types;
+ fwd_lcores[lc_id]->gso_ctx.gso_size = ETHER_MAX_LEN -
+ ETHER_CRC_LEN;
+ fwd_lcores[lc_id]->gso_ctx.flag = 0;
}
/* Configuration of packet forwarding streams. */
rte_exit(EXIT_FAILURE, "FAIL from init_fwd_streams()\n");
fwd_config_setup();
+
+ /* create a gro context for each lcore */
+ gro_param.gro_types = RTE_GRO_TCP_IPV4;
+ gro_param.max_flow_num = GRO_MAX_FLUSH_CYCLES;
+ gro_param.max_item_per_flow = MAX_PKT_BURST;
+ for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
+ gro_param.socket_id = rte_lcore_to_socket_id(
+ fwd_lcores_cpuids[lc_id]);
+ fwd_lcores[lc_id]->gro_ctx = rte_gro_ctx_create(&gro_param);
+ if (fwd_lcores[lc_id]->gro_ctx == NULL) {
+ rte_exit(EXIT_FAILURE,
+ "rte_gro_ctx_create() failed\n");
+ }
+ }
}
for (sm_id = 0; sm_id < nb_fs; sm_id++)
(*pkt_fwd)(fsm[sm_id]);
#ifdef RTE_LIBRTE_BITRATE
- tics_current = rte_rdtsc();
- if (tics_current - tics_datum >= tics_per_1sec) {
- /* Periodic bitrate calculation */
- for (idx_port = 0; idx_port < cnt_ports; idx_port++)
- rte_stats_bitrate_calc(bitrate_data, idx_port);
- tics_datum = tics_current;
+ if (bitrate_enabled != 0 &&
+ bitrate_lcore_id == rte_lcore_id()) {
+ tics_current = rte_rdtsc();
+ if (tics_current - tics_datum >= tics_per_1sec) {
+ /* Periodic bitrate calculation */
+ for (idx_port = 0;
+ idx_port < cnt_ports;
+ idx_port++)
+ rte_stats_bitrate_calc(bitrate_data,
+ idx_port);
+ tics_datum = tics_current;
+ }
}
#endif
#ifdef RTE_LIBRTE_LATENCY_STATS
- if (latencystats_lcore_id == rte_lcore_id())
+ if (latencystats_enabled != 0 &&
+ latencystats_lcore_id == rte_lcore_id())
rte_latencystats_update();
#endif
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
uint64_t fwd_cycles;
#endif
+
static const char *acc_stats_border = "+++++++++++++++";
if (test_done) {
fwd_port_stats_display(pt_id, &stats);
}
+
printf("\n %s Accumulated forward statistics for all ports"
"%s\n",
acc_stats_border, acc_stats_border);
void
dev_set_link_up(portid_t pid)
{
- if (rte_eth_dev_set_link_up((uint8_t)pid) < 0)
+ if (rte_eth_dev_set_link_up(pid) < 0)
printf("\nSet link up fail.\n");
}
void
dev_set_link_down(portid_t pid)
{
- if (rte_eth_dev_set_link_down((uint8_t)pid) < 0)
+ if (rte_eth_dev_set_link_down(pid) < 0)
printf("\nSet link down fail.\n");
}
if (port->need_reconfig > 0) {
port->need_reconfig = 0;
+ if (flow_isolate_all) {
+ int ret = port_flow_isolate(pi, 1);
+ if (ret) {
+ printf("Failed to apply isolated"
+ " mode on port %d\n", pi);
+ return -1;
+ }
+ }
+
printf("Configuring Port %d (socket %u)\n", pi,
port->socket_id);
/* configure port */
printf("Done\n");
}
+void
+reset_port(portid_t pid)
+{
+ int diag;
+ portid_t pi;
+ struct rte_port *port;
+
+ if (port_id_is_invalid(pid, ENABLED_WARN))
+ return;
+
+ printf("Resetting ports...\n");
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
+ continue;
+
+ if (port_is_forwarding(pi) != 0 && test_done == 0) {
+ printf("Please remove port %d from forwarding "
+ "configuration.\n", pi);
+ continue;
+ }
+
+ if (port_is_bonding_slave(pi)) {
+ printf("Please remove port %d from bonded device.\n",
+ pi);
+ continue;
+ }
+
+ diag = rte_eth_dev_reset(pi);
+ if (diag == 0) {
+ port = &ports[pi];
+ port->need_reconfig = 1;
+ port->need_reconfig_queues = 1;
+ } else {
+ printf("Failed to reset port %d. diag=%d\n", pi, diag);
+ }
+ }
+
+ printf("Done\n");
+}
+
void
attach_port(char *identifier)
{
}
void
-detach_port(uint8_t port_id)
+detach_port(portid_t port_id)
{
char name[RTE_ETH_NAME_MAX_LEN];
if (ports[port_id].flow_list)
port_flow_flush(port_id);
- if (rte_eth_dev_detach(port_id, name))
+ if (rte_eth_dev_detach(port_id, name)) {
+ TESTPMD_LOG(ERR, "Failed to detach port '%s'\n", name);
return;
+ }
nb_ports = rte_eth_dev_count();
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
- uint8_t portid, count, all_ports_up, print_flag = 0;
+ portid_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
printf("Checking link statuses...\n");
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
- printf("Port %d Link Up - speed %u "
- "Mbps - %s\n", (uint8_t)portid,
- (unsigned)link.link_speed,
+ printf(
+ "Port%d Link Up. speed %u Mbps- %s\n",
+ portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex\n"));
else
- printf("Port %d Link Down\n",
- (uint8_t)portid);
+ printf("Port %d Link Down\n", portid);
continue;
}
/* clear all_ports_up flag if any link down */
rmv_event_callback(void *arg)
{
struct rte_eth_dev *dev;
- struct rte_devargs *da;
- char name[32] = "";
- uint8_t port_id = (intptr_t)arg;
+ portid_t port_id = (intptr_t)arg;
RTE_ETH_VALID_PORTID_OR_RET(port_id);
dev = &rte_eth_devices[port_id];
- da = dev->device->devargs;
stop_port(port_id);
close_port(port_id);
- if (da->type == RTE_DEVTYPE_VIRTUAL)
- snprintf(name, sizeof(name), "%s", da->virt.drv_name);
- else if (da->type == RTE_DEVTYPE_WHITELISTED_PCI)
- rte_eal_pci_device_name(&da->pci.addr, name, sizeof(name));
- printf("removing device %s\n", name);
- rte_eal_dev_detach(name);
- dev->state = RTE_ETH_DEV_UNUSED;
+ printf("removing device %s\n", dev->device->name);
+ if (rte_eal_dev_detach(dev->device))
+ TESTPMD_LOG(ERR, "Failed to detach device %s\n",
+ dev->device->name);
}
/* This function is used by the interrupt thread */
-static void
-eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param)
+static int
+eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
+ void *ret_param)
{
static const char * const event_desc[] = {
[RTE_ETH_EVENT_UNKNOWN] = "Unknown",
};
RTE_SET_USED(param);
+ RTE_SET_USED(ret_param);
if (type >= RTE_ETH_EVENT_MAX) {
fprintf(stderr, "\nPort %" PRIu8 ": %s called upon invalid event %d\n",
port_id, __func__, type);
fflush(stderr);
- } else {
+ } else if (event_print_mask & (UINT32_C(1) << type)) {
printf("\nPort %" PRIu8 ": %s event\n", port_id,
event_desc[type]);
fflush(stdout);
default:
break;
}
+ return 0;
}
static int
-set_tx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
+set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
{
uint16_t i;
int diag;
}
static int
-set_rx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
+set_rx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
{
uint16_t i;
int diag;
}
static void
-map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port)
+map_port_queue_stats_mapping_registers(portid_t pi, struct rte_port *port)
{
int diag = 0;
rte_eth_macaddr_get(pid, &port->eth_addr);
map_port_queue_stats_mapping_registers(pid, port);
-#ifdef RTE_NIC_BYPASS
- rte_eth_dev_bypass_init(pid);
+#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
+ rte_pmd_ixgbe_bypass_init(pid);
#endif
if (lsc_interrupt &&
(rte_eth_devices[pid].data->dev_flags &
RTE_ETH_DEV_INTR_RMV))
port->dev_conf.intr_conf.rmv = 1;
+
+#if defined RTE_LIBRTE_PMD_SOFTNIC && defined RTE_LIBRTE_SCHED
+ /* Detect softnic port */
+ if (!strcmp(port->dev_info.driver_name, "net_softnic")) {
+ port->softnic_enable = 1;
+ memset(&port->softport, 0, sizeof(struct softnic_port));
+
+ if (!strcmp(cur_fwd_eng->fwd_mode_name, "tm"))
+ port->softport.tm_flag = 1;
+ }
+#endif
}
}
1 << (i % vmdq_rx_conf->nb_queue_pools);
}
for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
- vmdq_rx_conf->dcb_tc[i] = i;
- vmdq_tx_conf->dcb_tc[i] = i;
+ vmdq_rx_conf->dcb_tc[i] = i % num_tcs;
+ vmdq_tx_conf->dcb_tc[i] = i % num_tcs;
}
/* set DCB mode of RX and TX of multiple queues */
* Set the numbers of RX & TX queues to 0, so
* the RX & TX queues will not be setup.
*/
- (void)rte_eth_dev_configure(pid, 0, 0, &port_conf);
+ rte_eth_dev_configure(pid, 0, 0, &port_conf);
rte_eth_dev_info_get(pid, &rte_port->dev_info);
prompt_exit();
}
+static void
+print_stats(void)
+{
+ uint8_t i;
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' };
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, top_left);
+
+ printf("\nPort statistics ====================================");
+ for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
+ nic_stats_display(fwd_ports_ids[i]);
+}
+
static void
signal_handler(int signum)
{
rte_latencystats_uninit();
#endif
force_quit();
+ /* Set flag to indicate the force termination. */
+ f_quit = 1;
/* exit with the expected status */
signal(signum, SIG_DFL);
kill(getpid(), signum);
main(int argc, char** argv)
{
int diag;
- uint8_t port_id;
+ portid_t port_id;
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
if (diag < 0)
rte_panic("Cannot init EAL\n");
+ testpmd_logtype = rte_log_register("testpmd");
+ if (testpmd_logtype < 0)
+ rte_panic("Cannot register log type");
+ rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
+
+ if (mlockall(MCL_CURRENT | MCL_FUTURE)) {
+ TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
+ strerror(errno));
+ }
+
#ifdef RTE_LIBRTE_PDUMP
/* initialize packet capture framework */
rte_pdump_init(NULL);
nb_ports = (portid_t) rte_eth_dev_count();
if (nb_ports == 0)
- RTE_LOG(WARNING, EAL, "No probed ethernet devices\n");
+ TESTPMD_LOG(WARNING, "No probed ethernet devices\n");
/* allocate port structures, and init them */
init_port();
rte_panic("Empty set of forwarding logical cores - check the "
"core mask supplied in the command parameters\n");
+ /* Bitrate/latency stats disabled by default */
+#ifdef RTE_LIBRTE_BITRATE
+ bitrate_enabled = 0;
+#endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+ latencystats_enabled = 0;
+#endif
+
argc -= diag;
argv += diag;
if (argc > 1)
launch_args_parse(argc, argv);
+ if (tx_first && interactive)
+ rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
+ "interactive mode.\n");
+
+ if (tx_first && lsc_interrupt) {
+ printf("Warning: lsc_interrupt needs to be off when "
+ " using tx_first. Disabling.\n");
+ lsc_interrupt = 0;
+ }
+
if (!nb_rxq && !nb_txq)
printf("Warning: Either rx or tx queues should be non-zero\n");
/* Setup bitrate stats */
#ifdef RTE_LIBRTE_BITRATE
- bitrate_data = rte_stats_bitrate_create();
- if (bitrate_data == NULL)
- rte_exit(EXIT_FAILURE, "Could not allocate bitrate data.\n");
- rte_stats_bitrate_reg(bitrate_data);
+ if (bitrate_enabled != 0) {
+ bitrate_data = rte_stats_bitrate_create();
+ if (bitrate_data == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Could not allocate bitrate data.\n");
+ rte_stats_bitrate_reg(bitrate_data);
+ }
#endif
-
#ifdef RTE_LIBRTE_CMDLINE
+ if (strlen(cmdline_filename) != 0)
+ cmdline_read_from_file(cmdline_filename);
+
if (interactive == 1) {
if (auto_start) {
printf("Start automatic packet forwarding\n");
start_packet_forwarding(0);
}
prompt();
+ pmd_test_exit();
} else
#endif
{
char c;
int rc;
+ f_quit = 0;
+
printf("No commandline core given, start packet forwarding\n");
- start_packet_forwarding(0);
+ start_packet_forwarding(tx_first);
+ if (stats_period != 0) {
+ uint64_t prev_time = 0, cur_time, diff_time = 0;
+ uint64_t timer_period;
+
+ /* Convert to number of cycles */
+ timer_period = stats_period * rte_get_timer_hz();
+
+ while (f_quit == 0) {
+ cur_time = rte_get_timer_cycles();
+ diff_time += cur_time - prev_time;
+
+ if (diff_time >= timer_period) {
+ print_stats();
+ /* Reset the timer */
+ diff_time = 0;
+ }
+ /* Sleep to avoid unnecessary checks */
+ prev_time = cur_time;
+ sleep(1);
+ }
+ }
+
printf("Press enter to exit\n");
rc = read(0, &c, 1);
pmd_test_exit();
git.droids-corp.org / dpdk.git / blobdiff