uint8_t tx_pkt_nb_segs = 1; /**< Number of segments in TXONLY packets */
uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */
-uint16_t mb_mempool_cache = DEF_PKT_BURST; /**< Size of mbuf mempool cache. */
+uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */
/* current configuration is in DCB or not,0 means it is not in DCB mode */
uint8_t dcb_config = 0;
*/
#define RX_PTHRESH 8 /**< Default value of RX prefetch threshold register. */
#define RX_HTHRESH 8 /**< Default value of RX host threshold register. */
-#define RX_WTHRESH 4 /**< Default value of RX write-back threshold register. */
+#define RX_WTHRESH 0 /**< Default value of RX write-back threshold register. */
-#define TX_PTHRESH 36 /**< Default value of TX prefetch threshold register. */
+#define TX_PTHRESH 32 /**< Default value of TX prefetch threshold register. */
#define TX_HTHRESH 0 /**< Default value of TX host threshold register. */
#define TX_WTHRESH 0 /**< Default value of TX write-back threshold register. */
/*
* Configurable value of RX free threshold.
*/
-uint16_t rx_free_thresh = 0; /* Immediately free RX descriptors by default. */
+uint16_t rx_free_thresh = 32; /* Refill RX descriptors once every 32 packets,
+ This setting is needed for ixgbe to enable bulk alloc or vector
+ receive functionality. */
/*
* Configurable value of RX drop enable.
.drop_queue = 127,
};
-static volatile int test_done = 1; /* stop packet forwarding when set to 1. */
+volatile int test_done = 1; /* stop packet forwarding when set to 1. */
struct queue_stats_mappings tx_queue_stats_mappings_array[MAX_TX_QUEUE_STATS_MAPPINGS];
struct queue_stats_mappings rx_queue_stats_mappings_array[MAX_RX_QUEUE_STATS_MAPPINGS];
mb_ctor_arg = (struct mbuf_ctor_arg *) opaque_arg;
mb = (struct rte_mbuf *) raw_mbuf;
- mb->type = RTE_MBUF_PKT;
mb->pool = mp;
mb->buf_addr = (void *) ((char *)mb + mb_ctor_arg->seg_buf_offset);
mb->buf_physaddr = (uint64_t) (rte_mempool_virt2phy(mp, mb) +
mb_ctor_arg->seg_buf_offset);
mb->buf_len = mb_ctor_arg->seg_buf_size;
- mb->type = RTE_MBUF_PKT;
mb->ol_flags = 0;
- mb->pkt.data = (char *) mb->buf_addr + RTE_PKTMBUF_HEADROOM;
- mb->pkt.nb_segs = 1;
- mb->pkt.vlan_macip.data = 0;
- mb->pkt.hash.rss = 0;
+ mb->data_off = RTE_PKTMBUF_HEADROOM;
+ mb->nb_segs = 1;
+ mb->tx_offload = 0;
+ mb->vlan_tci = 0;
+ mb->hash.rss = 0;
}
static void
* Records which Mbuf pool to use by each logical core, if needed.
*/
for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
- mbp = mbuf_pool_find(rte_lcore_to_socket_id(lc_id));
+ mbp = mbuf_pool_find(
+ rte_lcore_to_socket_id(fwd_lcores_cpuids[lc_id]));
+
if (mbp == NULL)
mbp = mbuf_pool_find(0);
fwd_lcores[lc_id]->mbp = mbp;
rte_exit(EXIT_FAILURE, "FAIL from init_fwd_streams()\n");
}
+
+void
+reconfig(portid_t new_port_id, unsigned socket_id)
+{
+ struct rte_port *port;
+
+ /* Reconfiguration of Ethernet ports. */
+ ports = rte_realloc(ports,
+ sizeof(struct rte_port) * nb_ports,
+ CACHE_LINE_SIZE);
+ if (ports == NULL) {
+ rte_exit(EXIT_FAILURE, "rte_realloc(%d struct rte_port) failed\n",
+ nb_ports);
+ }
+
+ port = &ports[new_port_id];
+ rte_eth_dev_info_get(new_port_id, &port->dev_info);
+
+ /* set flag to initialize port/queue */
+ port->need_reconfig = 1;
+ port->need_reconfig_queues = 1;
+ port->socket_id = socket_id;
+
+ init_port_config();
+}
+
+
int
init_fwd_streams(void)
{
portid_t pi;
queueid_t qi;
struct rte_port *port;
- uint8_t *mac_addr;
+ struct ether_addr mac_addr;
if (test_done == 0) {
printf("Please stop forwarding first\n");
RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
printf("Port %d can not be set into started\n", pi);
- mac_addr = port->eth_addr.addr_bytes;
+ rte_eth_macaddr_get(pi, &mac_addr);
printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
- mac_addr[0], mac_addr[1], mac_addr[2],
- mac_addr[3], mac_addr[4], mac_addr[5]);
+ mac_addr.addr_bytes[0], mac_addr.addr_bytes[1],
+ mac_addr.addr_bytes[2], mac_addr.addr_bytes[3],
+ mac_addr.addr_bytes[4], mac_addr.addr_bytes[5]);
/* at least one port started, need checking link status */
need_check_link_status = 1;
return 1;
}
+int
+port_is_started(portid_t port_id)
+{
+ if (port_id_is_invalid(port_id))
+ return -1;
+
+ if (ports[port_id].port_status != RTE_PORT_STARTED)
+ return 0;
+
+ return 1;
+}
+
void
pmd_test_exit(void)
{
return 0;
}
-#ifdef RTE_EXEC_ENV_BAREMETAL
-#define main _main
-#endif
-
int
main(int argc, char** argv)
{
if (diag < 0)
rte_panic("Cannot init EAL\n");
- if (rte_eal_pci_probe())
- rte_panic("Cannot probe PCI\n");
-
nb_ports = (portid_t) rte_eth_dev_count();
if (nb_ports == 0)
- rte_exit(EXIT_FAILURE, "No probed ethernet devices - "
- "check that "
- "CONFIG_RTE_LIBRTE_IGB_PMD=y and that "
- "CONFIG_RTE_LIBRTE_EM_PMD=y and that "
- "CONFIG_RTE_LIBRTE_IXGBE_PMD=y in your "
- "configuration file\n");
+ rte_exit(EXIT_FAILURE, "No probed ethernet device\n");
set_def_fwd_config();
if (nb_lcores == 0)
git.droids-corp.org / dpdk.git / blobdiff