#include <rte_log.h>
#include <rte_debug.h>
#include <rte_cycles.h>
-#include <rte_malloc_heap.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_launch.h>
/*
* Configurable number of RX/TX queues.
*/
+queueid_t nb_hairpinq; /**< Number of hairpin queues per port. */
queueid_t nb_rxq = 1; /**< Number of RX queues per port. */
queueid_t nb_txq = 1; /**< Number of TX queues per port. */
/* After attach, port setup is called on event or by iterator */
bool setup_on_probe_event = true;
+/* Clear ptypes on port initialization. */
+uint8_t clear_ptypes = true;
+
/* Pretty printing of ethdev events */
static const char * const eth_event_desc[] = {
[RTE_ETH_EVENT_UNKNOWN] = "unknown",
struct gro_status gro_ports[RTE_MAX_ETHPORTS];
uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;
-struct vxlan_encap_conf vxlan_encap_conf = {
- .select_ipv4 = 1,
- .select_vlan = 0,
- .select_tos_ttl = 0,
- .vni = "\x00\x00\x00",
- .udp_src = 0,
- .udp_dst = RTE_BE16(4789),
- .ipv4_src = RTE_IPV4(127, 0, 0, 1),
- .ipv4_dst = RTE_IPV4(255, 255, 255, 255),
- .ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x00\x01",
- .ipv6_dst = "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x11\x11",
- .vlan_tci = 0,
- .ip_tos = 0,
- .ip_ttl = 255,
- .eth_src = "\x00\x00\x00\x00\x00\x00",
- .eth_dst = "\xff\xff\xff\xff\xff\xff",
-};
-
-struct nvgre_encap_conf nvgre_encap_conf = {
- .select_ipv4 = 1,
- .select_vlan = 0,
- .tni = "\x00\x00\x00",
- .ipv4_src = RTE_IPV4(127, 0, 0, 1),
- .ipv4_dst = RTE_IPV4(255, 255, 255, 255),
- .ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x00\x01",
- .ipv6_dst = "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x11\x11",
- .vlan_tci = 0,
- .eth_src = "\x00\x00\x00\x00\x00\x00",
- .eth_dst = "\xff\xff\xff\xff\xff\xff",
-};
-
/* Forward function declarations */
static void setup_attached_port(portid_t pi);
static void map_port_queue_stats_mapping_registers(portid_t pi,
queueid_t
get_allowed_max_nb_rxq(portid_t *pid)
{
- queueid_t allowed_max_rxq = MAX_QUEUE_ID;
+ queueid_t allowed_max_rxq = RTE_MAX_QUEUES_PER_PORT;
+ bool max_rxq_valid = false;
portid_t pi;
struct rte_eth_dev_info dev_info;
RTE_ETH_FOREACH_DEV(pi) {
- rte_eth_dev_info_get(pi, &dev_info);
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ max_rxq_valid = true;
if (dev_info.max_rx_queues < allowed_max_rxq) {
allowed_max_rxq = dev_info.max_rx_queues;
*pid = pi;
}
}
- return allowed_max_rxq;
+ return max_rxq_valid ? allowed_max_rxq : 0;
}
/*
queueid_t
get_allowed_max_nb_txq(portid_t *pid)
{
- queueid_t allowed_max_txq = MAX_QUEUE_ID;
+ queueid_t allowed_max_txq = RTE_MAX_QUEUES_PER_PORT;
+ bool max_txq_valid = false;
portid_t pi;
struct rte_eth_dev_info dev_info;
RTE_ETH_FOREACH_DEV(pi) {
- rte_eth_dev_info_get(pi, &dev_info);
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ max_txq_valid = true;
if (dev_info.max_tx_queues < allowed_max_txq) {
allowed_max_txq = dev_info.max_tx_queues;
*pid = pi;
}
}
- return allowed_max_txq;
+ return max_txq_valid ? allowed_max_txq : 0;
}
/*
return 0;
}
+/*
+ * Get the allowed maximum number of hairpin queues.
+ * *pid return the port id which has minimal value of
+ * max_hairpin_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_hairpinq(portid_t *pid)
+{
+ queueid_t allowed_max_hairpinq = RTE_MAX_QUEUES_PER_PORT;
+ portid_t pi;
+ struct rte_eth_hairpin_cap cap;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (rte_eth_dev_hairpin_capability_get(pi, &cap) != 0) {
+ *pid = pi;
+ return 0;
+ }
+ if (cap.max_nb_queues < allowed_max_hairpinq) {
+ allowed_max_hairpinq = cap.max_nb_queues;
+ *pid = pi;
+ }
+ }
+ return allowed_max_hairpinq;
+}
+
+/*
+ * Check input hairpin is valid or not.
+ * If input hairpin is not greater than any of maximum number
+ * of hairpin queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_hairpinq(queueid_t hairpinq)
+{
+ queueid_t allowed_max_hairpinq;
+ portid_t pid = 0;
+
+ allowed_max_hairpinq = get_allowed_max_nb_hairpinq(&pid);
+ if (hairpinq > allowed_max_hairpinq) {
+ printf("Fail: input hairpin (%u) can't be greater "
+ "than max_hairpin_queues (%u) of port %u\n",
+ hairpinq, allowed_max_hairpinq, pid);
+ return -1;
+ }
+ return 0;
+}
+
static void
init_config(void)
{
uint16_t data_size;
bool warning = 0;
int k;
+ int ret;
memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
/* Apply default TxRx configuration for all ports */
port->dev_conf.txmode = tx_mode;
port->dev_conf.rxmode = rx_mode;
- rte_eth_dev_info_get(pid, &port->dev_info);
+
+ ret = eth_dev_info_get_print_err(pid, &port->dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_dev_info_get() failed\n");
if (!(port->dev_info.tx_offload_capa &
DEV_TX_OFFLOAD_MBUF_FAST_FREE))
port->dev_conf.txmode.offloads &=
~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
- if (!(port->dev_info.tx_offload_capa &
- DEV_TX_OFFLOAD_MATCH_METADATA))
- port->dev_conf.txmode.offloads &=
- ~DEV_TX_OFFLOAD_MATCH_METADATA;
if (numa_support) {
if (port_numa[pid] != NUMA_NO_CONFIG)
port_per_socket[port_numa[pid]]++;
reconfig(portid_t new_port_id, unsigned socket_id)
{
struct rte_port *port;
+ int ret;
/* Reconfiguration of Ethernet ports. */
port = &ports[new_port_id];
- rte_eth_dev_info_get(new_port_id, &port->dev_info);
+
+ ret = eth_dev_info_get_print_err(new_port_id, &port->dev_info);
+ if (ret != 0)
+ return;
/* set flag to initialize port/queue */
port->need_reconfig = 1;
return 1;
}
+/* Configure the Rx and Tx hairpin queues for the selected port. */
+static int
+setup_hairpin_queues(portid_t pi)
+{
+ queueid_t qi;
+ struct rte_eth_hairpin_conf hairpin_conf = {
+ .peer_count = 1,
+ };
+ int i;
+ int diag;
+ struct rte_port *port = &ports[pi];
+
+ for (qi = nb_txq, i = 0; qi < nb_hairpinq + nb_txq; qi++) {
+ hairpin_conf.peers[0].port = pi;
+ hairpin_conf.peers[0].queue = i + nb_rxq;
+ diag = rte_eth_tx_hairpin_queue_setup
+ (pi, qi, nb_txd, &hairpin_conf);
+ i++;
+ if (diag == 0)
+ continue;
+
+ /* Fail to setup rx queue, return */
+ if (rte_atomic16_cmpset(&(port->port_status),
+ RTE_PORT_HANDLING,
+ RTE_PORT_STOPPED) == 0)
+ printf("Port %d can not be set back "
+ "to stopped\n", pi);
+ printf("Fail to configure port %d hairpin "
+ "queues\n", pi);
+ /* try to reconfigure queues next time */
+ port->need_reconfig_queues = 1;
+ return -1;
+ }
+ for (qi = nb_rxq, i = 0; qi < nb_hairpinq + nb_rxq; qi++) {
+ hairpin_conf.peers[0].port = pi;
+ hairpin_conf.peers[0].queue = i + nb_txq;
+ diag = rte_eth_rx_hairpin_queue_setup
+ (pi, qi, nb_rxd, &hairpin_conf);
+ i++;
+ if (diag == 0)
+ continue;
+
+ /* Fail to setup rx queue, return */
+ if (rte_atomic16_cmpset(&(port->port_status),
+ RTE_PORT_HANDLING,
+ RTE_PORT_STOPPED) == 0)
+ printf("Port %d can not be set back "
+ "to stopped\n", pi);
+ printf("Fail to configure port %d hairpin "
+ "queues\n", pi);
+ /* try to reconfigure queues next time */
+ port->need_reconfig_queues = 1;
+ return -1;
+ }
+ return 0;
+}
+
int
start_port(portid_t pid)
{
queueid_t qi;
struct rte_port *port;
struct rte_ether_addr mac_addr;
+ struct rte_eth_hairpin_cap cap;
if (port_id_is_invalid(pid, ENABLED_WARN))
return 0;
configure_rxtx_dump_callbacks(0);
printf("Configuring Port %d (socket %u)\n", pi,
port->socket_id);
+ if (nb_hairpinq > 0 &&
+ rte_eth_dev_hairpin_capability_get(pi, &cap)) {
+ printf("Port %d doesn't support hairpin "
+ "queues\n", pi);
+ return -1;
+ }
/* configure port */
- diag = rte_eth_dev_configure(pi, nb_rxq, nb_txq,
- &(port->dev_conf));
+ diag = rte_eth_dev_configure(pi, nb_rxq + nb_hairpinq,
+ nb_txq + nb_hairpinq,
+ &(port->dev_conf));
if (diag != 0) {
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
port->need_reconfig_queues = 1;
return -1;
}
+ /* setup hairpin queues */
+ if (setup_hairpin_queues(pi) != 0)
+ return -1;
}
configure_rxtx_dump_callbacks(verbose_level);
+ if (clear_ptypes) {
+ diag = rte_eth_dev_set_ptypes(pi, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
+ if (diag < 0)
+ printf(
+ "Port %d: Failed to disable Ptype parsing\n",
+ pi);
+ }
+
/* start port */
if (rte_eth_dev_start(pi) < 0) {
printf("Fail to start port %d\n", pi);
RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
printf("Port %d can not be set into started\n", pi);
- rte_eth_macaddr_get(pi, &mac_addr);
- printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
+ if (eth_macaddr_get_print_err(pi, &mac_addr) == 0)
+ printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
mac_addr.addr_bytes[0], mac_addr.addr_bytes[1],
mac_addr.addr_bytes[2], mac_addr.addr_bytes[3],
mac_addr.addr_bytes[4], mac_addr.addr_bytes[5]);
if (port_id_is_invalid(pid, ENABLED_WARN))
return;
+ if ((pid == (portid_t)RTE_PORT_ALL && !all_ports_stopped()) ||
+ (pid != (portid_t)RTE_PORT_ALL && !port_is_stopped(pid))) {
+ printf("Can not reset port(s), please stop port(s) first.\n");
+ return;
+ }
+
printf("Resetting ports...\n");
RTE_ETH_FOREACH_DEV(pi) {
setup_attached_port(portid_t pi)
{
unsigned int socket_id;
+ int ret;
socket_id = (unsigned)rte_eth_dev_socket_id(pi);
/* if socket_id is invalid, set to the first available socket. */
if (check_socket_id(socket_id) < 0)
socket_id = socket_ids[0];
reconfig(pi, socket_id);
- rte_eth_promiscuous_enable(pi);
+ ret = rte_eth_promiscuous_enable(pi);
+ if (ret != 0)
+ printf("Error during enabling promiscuous mode for port %u: %s - ignore\n",
+ pi, rte_strerror(-ret));
ports_ids[nb_ports++] = pi;
fwd_ports_ids[nb_fwd_ports++] = pi;
printf("Removing a device...\n");
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
+ return;
+
dev = rte_eth_devices[port_id].device;
if (dev == NULL) {
printf("Device already removed\n");
if (ports[port_id].port_status != RTE_PORT_CLOSED) {
if (ports[port_id].port_status != RTE_PORT_STOPPED) {
printf("Port %u not stopped\n", port_id);
+ rte_eth_iterator_cleanup(&iterator);
return;
}
portid_t portid;
uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
+ int ret;
printf("Checking link statuses...\n");
fflush(stdout);
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(portid, &link);
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
{
portid_t pid;
struct rte_port *port;
+ int ret;
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
port->dev_conf.fdir_conf = fdir_conf;
- rte_eth_dev_info_get(pid, &port->dev_info);
+
+ ret = eth_dev_info_get_print_err(pid, &port->dev_info);
+ if (ret != 0)
+ return;
+
if (nb_rxq > 1) {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
port->dev_conf.rx_adv_conf.rss_conf.rss_hf =
rxtx_port_config(port);
- rte_eth_macaddr_get(pid, &port->eth_addr);
+ ret = eth_macaddr_get_print_err(pid, &port->eth_addr);
+ if (ret != 0)
+ return;
map_port_queue_stats_mapping_registers(pid, port);
#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
retval = rte_eth_dev_configure(pid, nb_rxq, nb_rxq, &port_conf);
if (retval < 0)
return retval;
- rte_eth_dev_info_get(pid, &rte_port->dev_info);
+
+ retval = eth_dev_info_get_print_err(pid, &rte_port->dev_info);
+ if (retval != 0)
+ return retval;
/* If dev_info.vmdq_pool_base is greater than 0,
* the queue id of vmdq pools is started after pf queues.
for (i = 0; i < RTE_DIM(vlan_tags); i++)
rx_vft_set(pid, vlan_tags[i], 1);
- rte_eth_macaddr_get(pid, &rte_port->eth_addr);
+ retval = eth_macaddr_get_print_err(pid, &rte_port->eth_addr);
+ if (retval != 0)
+ return retval;
+
map_port_queue_stats_mapping_registers(pid, rte_port);
rte_port->dcb_flag = 1;
rte_pdump_uninit();
#endif
#ifdef RTE_LIBRTE_LATENCY_STATS
- rte_latencystats_uninit();
+ if (latencystats_enabled != 0)
+ rte_latencystats_uninit();
#endif
force_quit();
/* Set flag to indicate the force termination. */
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
- diag = rte_eal_init(argc, argv);
- if (diag < 0)
- rte_panic("Cannot init EAL\n");
-
testpmd_logtype = rte_log_register("testpmd");
if (testpmd_logtype < 0)
- rte_panic("Cannot register log type");
+ rte_exit(EXIT_FAILURE, "Cannot register log type");
rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
+ diag = rte_eal_init(argc, argv);
+ if (diag < 0)
+ rte_exit(EXIT_FAILURE, "Cannot init EAL: %s\n",
+ rte_strerror(rte_errno));
+
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY)
+ rte_exit(EXIT_FAILURE,
+ "Secondary process type not supported.\n");
+
ret = register_eth_event_callback();
if (ret != 0)
- rte_panic("Cannot register for ethdev events");
+ rte_exit(EXIT_FAILURE, "Cannot register for ethdev events");
#ifdef RTE_LIBRTE_PDUMP
/* initialize packet capture framework */
set_def_fwd_config();
if (nb_lcores == 0)
- rte_panic("Empty set of forwarding logical cores - check the "
- "core mask supplied in the command parameters\n");
+ rte_exit(EXIT_FAILURE, "No cores defined for forwarding\n"
+ "Check the core mask argument\n");
/* Bitrate/latency stats disabled by default */
#ifdef RTE_LIBRTE_BITRATE
rte_exit(EXIT_FAILURE, "Start ports failed\n");
/* set all ports to promiscuous mode by default */
- RTE_ETH_FOREACH_DEV(port_id)
- rte_eth_promiscuous_enable(port_id);
+ RTE_ETH_FOREACH_DEV(port_id) {
+ ret = rte_eth_promiscuous_enable(port_id);
+ if (ret != 0)
+ printf("Error during enabling promiscuous mode for port %u: %s - ignore\n",
+ port_id, rte_strerror(-ret));
+ }
/* Init metrics library */
rte_metrics_init(rte_socket_id());
git.droids-corp.org / dpdk.git / blobdiff