tile: fix build
[dpdk.git] / app / test / test_cryptodev_perf.c
index 7751ff2..7f1adf8 100644 (file)
@@ -157,6 +157,12 @@ test_perf_create_openssl_session(uint8_t dev_id, enum chain_mode chain,
                enum rte_crypto_cipher_algorithm cipher_algo,
                unsigned int cipher_key_len,
                enum rte_crypto_auth_algorithm auth_algo);
+static struct rte_cryptodev_sym_session *
+test_perf_create_armv8_session(uint8_t dev_id, enum chain_mode chain,
+               enum rte_crypto_cipher_algorithm cipher_algo,
+               unsigned int cipher_key_len,
+               enum rte_crypto_auth_algorithm auth_algo);
+
 static struct rte_mbuf *
 test_perf_create_pktmbuf(struct rte_mempool *mpool, unsigned buf_sz);
 static inline struct rte_crypto_op *
@@ -397,6 +403,28 @@ testsuite_setup(void)
                }
        }
 
+       /* Create 2 ARMv8 devices if required */
+       if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_ARMV8_PMD) {
+#ifndef RTE_LIBRTE_PMD_ARMV8_CRYPTO
+               RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO must be"
+                       " enabled in config file to run this testsuite.\n");
+               return TEST_FAILED;
+#endif
+               nb_devs = rte_cryptodev_count_devtype(
+                               RTE_CRYPTODEV_ARMV8_PMD);
+               if (nb_devs < 2) {
+                       for (i = nb_devs; i < 2; i++) {
+                               ret = rte_eal_vdev_init(
+                                       RTE_STR(CRYPTODEV_NAME_ARMV8_PMD),
+                                       NULL);
+
+                               TEST_ASSERT(ret == 0, "Failed to create "
+                                       "instance %u of pmd : %s", i,
+                                       RTE_STR(CRYPTODEV_NAME_ARMV8_PMD));
+                       }
+               }
+       }
+
 #ifndef RTE_LIBRTE_PMD_QAT
        if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_QAT_SYM_PMD) {
                RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
@@ -2216,6 +2244,7 @@ test_perf_snow3G_optimise_cyclecount(struct perf_test_params *pparams)
                rte_pktmbuf_free(c_ops[i]->sym->m_src);
                rte_crypto_op_free(c_ops[i]);
        }
+       rte_cryptodev_sym_session_free(ts_params->dev_id, sess);
 
        return TEST_SUCCESS;
 }
@@ -2415,6 +2444,140 @@ test_perf_openssl_optimise_cyclecount(struct perf_test_params *pparams)
        }
        printf("\n");
 
+       for (i = 0; i < num_to_submit ; i++) {
+               rte_pktmbuf_free(c_ops[i]->sym->m_src);
+               rte_crypto_op_free(c_ops[i]);
+       }
+       rte_cryptodev_sym_session_free(ts_params->dev_id, sess);
+
+       return TEST_SUCCESS;
+}
+
+static int
+test_perf_armv8_optimise_cyclecount(struct perf_test_params *pparams)
+{
+       uint32_t num_to_submit = pparams->total_operations;
+       struct rte_crypto_op *c_ops[num_to_submit];
+       struct rte_crypto_op *proc_ops[num_to_submit];
+       uint64_t failed_polls, retries, start_cycles, end_cycles,
+                total_cycles = 0;
+       uint32_t burst_sent = 0, burst_received = 0;
+       uint32_t i, burst_size, num_sent, num_ops_received;
+       uint32_t nb_ops;
+
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+       static struct rte_cryptodev_sym_session *sess;
+
+       unsigned int digest_length = get_auth_digest_length(pparams->auth_algo);
+
+       if (rte_cryptodev_count() == 0) {
+               printf("\nNo crypto devices found. Is PMD build configured?\n");
+               return TEST_FAILED;
+       }
+
+       /* Create Crypto session*/
+       sess = test_perf_create_armv8_session(ts_params->dev_id,
+                       pparams->chain, pparams->cipher_algo,
+                       pparams->cipher_key_length, pparams->auth_algo);
+       TEST_ASSERT_NOT_NULL(sess, "Session creation failed");
+
+       /* Generate Crypto op data structure(s)*/
+       for (i = 0; i < num_to_submit ; i++) {
+               struct rte_mbuf *m = test_perf_create_pktmbuf(
+                                               ts_params->mbuf_mp,
+                                               pparams->buf_size);
+               TEST_ASSERT_NOT_NULL(m, "Failed to allocate tx_buf");
+
+               struct rte_crypto_op *op =
+                               rte_crypto_op_alloc(ts_params->op_mpool,
+                                               RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+               TEST_ASSERT_NOT_NULL(op, "Failed to allocate op");
+
+               op = test_perf_set_crypto_op_aes(op, m, sess, pparams->buf_size,
+                               digest_length, pparams->chain);
+               TEST_ASSERT_NOT_NULL(op, "Failed to attach op to session");
+
+               c_ops[i] = op;
+       }
+
+       printf("\nOn %s dev%u qp%u, %s, cipher algo:%s, cipher key length:%u, "
+                       "auth_algo:%s, Packet Size %u bytes",
+                       pmd_name(gbl_cryptodev_perftest_devtype),
+                       ts_params->dev_id, 0,
+                       chain_mode_name(pparams->chain),
+                       cipher_algo_name(pparams->cipher_algo),
+                       pparams->cipher_key_length,
+                       auth_algo_name(pparams->auth_algo),
+                       pparams->buf_size);
+       printf("\nOps Tx\tOps Rx\tOps/burst  ");
+       printf("Retries  "
+               "EmptyPolls\tIACycles/CyOp\tIACycles/Burst\tIACycles/Byte");
+
+       for (i = 2; i <= 128 ; i *= 2) {
+               num_sent = 0;
+               num_ops_received = 0;
+               retries = 0;
+               failed_polls = 0;
+               burst_size = i;
+               total_cycles = 0;
+               while (num_sent < num_to_submit) {
+                       if ((num_to_submit - num_sent) < burst_size)
+                               nb_ops = num_to_submit - num_sent;
+                       else
+                               nb_ops = burst_size;
+
+                       start_cycles = rte_rdtsc();
+                       burst_sent = rte_cryptodev_enqueue_burst(
+                               ts_params->dev_id,
+                               0, &c_ops[num_sent],
+                               nb_ops);
+                       end_cycles = rte_rdtsc();
+
+                       if (burst_sent == 0)
+                               retries++;
+                       num_sent += burst_sent;
+                       total_cycles += (end_cycles - start_cycles);
+
+                       start_cycles = rte_rdtsc();
+                       burst_received = rte_cryptodev_dequeue_burst(
+                                       ts_params->dev_id, 0, proc_ops,
+                                       burst_size);
+                       end_cycles = rte_rdtsc();
+                       if (burst_received < burst_sent)
+                               failed_polls++;
+                       num_ops_received += burst_received;
+
+                       total_cycles += end_cycles - start_cycles;
+               }
+
+               while (num_ops_received != num_to_submit) {
+                       /* Sending 0 length burst to flush sw crypto device */
+                       rte_cryptodev_enqueue_burst(
+                                               ts_params->dev_id, 0, NULL, 0);
+
+                       start_cycles = rte_rdtsc();
+                       burst_received = rte_cryptodev_dequeue_burst(
+                               ts_params->dev_id, 0, proc_ops, burst_size);
+                       end_cycles = rte_rdtsc();
+
+                       total_cycles += end_cycles - start_cycles;
+                       if (burst_received == 0)
+                               failed_polls++;
+                       num_ops_received += burst_received;
+               }
+
+               printf("\n%u\t%u\t%u", num_sent, num_ops_received, burst_size);
+               printf("\t\t%"PRIu64, retries);
+               printf("\t%"PRIu64, failed_polls);
+               printf("\t\t%"PRIu64, total_cycles/num_ops_received);
+               printf("\t\t%"PRIu64,
+                       (total_cycles/num_ops_received)*burst_size);
+               printf("\t\t%"PRIu64,
+                       total_cycles/(num_ops_received*pparams->buf_size));
+       }
+       printf("\n");
+
        for (i = 0; i < num_to_submit ; i++) {
                rte_pktmbuf_free(c_ops[i]->sym->m_src);
                rte_crypto_op_free(c_ops[i]);
@@ -2688,6 +2851,56 @@ test_perf_create_openssl_session(uint8_t dev_id, enum chain_mode chain,
        }
 }
 
+static struct rte_cryptodev_sym_session *
+test_perf_create_armv8_session(uint8_t dev_id, enum chain_mode chain,
+               enum rte_crypto_cipher_algorithm cipher_algo,
+               unsigned int cipher_key_len,
+               enum rte_crypto_auth_algorithm auth_algo)
+{
+       struct rte_crypto_sym_xform cipher_xform = { 0 };
+       struct rte_crypto_sym_xform auth_xform = { 0 };
+
+       /* Setup Cipher Parameters */
+       cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       cipher_xform.cipher.algo = cipher_algo;
+
+       switch (cipher_algo) {
+       case RTE_CRYPTO_CIPHER_AES_CBC:
+               cipher_xform.cipher.key.data = aes_cbc_128_key;
+               break;
+       default:
+               return NULL;
+       }
+
+       cipher_xform.cipher.key.length = cipher_key_len;
+
+       /* Setup Auth Parameters */
+       auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+       auth_xform.auth.algo = auth_algo;
+
+       auth_xform.auth.digest_length = get_auth_digest_length(auth_algo);
+
+       switch (chain) {
+       case CIPHER_HASH:
+               cipher_xform.next = &auth_xform;
+               auth_xform.next = NULL;
+               /* Encrypt and hash the result */
+               cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+               /* Create Crypto session*/
+               return rte_cryptodev_sym_session_create(dev_id, &cipher_xform);
+       case HASH_CIPHER:
+               auth_xform.next = &cipher_xform;
+               cipher_xform.next = NULL;
+               /* Hash encrypted message and decrypt */
+               cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
+               /* Create Crypto session*/
+               return rte_cryptodev_sym_session_create(dev_id, &auth_xform);
+       default:
+               return NULL;
+       }
+}
+
 #define AES_BLOCK_SIZE 16
 #define AES_CIPHER_IV_LENGTH 16
 
@@ -3056,6 +3269,7 @@ test_perf_aes_sha(uint8_t dev_id, uint16_t queue_id,
 
        for (i = 0; i < pparams->burst_size * NUM_MBUF_SETS; i++)
                rte_pktmbuf_free(mbufs[i]);
+       rte_cryptodev_sym_session_free(dev_id, sess);
 
        printf("\n");
        return TEST_SUCCESS;
@@ -3219,6 +3433,7 @@ test_perf_snow3g(uint8_t dev_id, uint16_t queue_id,
 
        for (i = 0; i < pparams->burst_size * NUM_MBUF_SETS; i++)
                rte_pktmbuf_free(mbufs[i]);
+       rte_cryptodev_sym_session_free(dev_id, sess);
 
        printf("\n");
        return TEST_SUCCESS;
@@ -3360,6 +3575,140 @@ test_perf_openssl(uint8_t dev_id, uint16_t queue_id,
 
        tsc_end = rte_rdtsc_precise();
 
+       double ops_s = ((double)processed / (tsc_end - tsc_start))
+                                       * rte_get_tsc_hz();
+       double throughput = (ops_s * pparams->buf_size * NUM_MBUF_SETS)
+                                       / 1000000000;
+
+       printf("\t%u\t%6.2f\t%10.2f\t%8"PRIu64"\t%8"PRIu64, pparams->buf_size,
+                       ops_s / 1000000, throughput, retries, failed_polls);
+
+       for (i = 0; i < pparams->burst_size * NUM_MBUF_SETS; i++)
+               rte_pktmbuf_free(mbufs[i]);
+       rte_cryptodev_sym_session_free(dev_id, sess);
+
+       printf("\n");
+       return TEST_SUCCESS;
+}
+
+static int
+test_perf_armv8(uint8_t dev_id, uint16_t queue_id,
+               struct perf_test_params *pparams)
+{
+       uint16_t i, k, l, m;
+       uint16_t j = 0;
+       uint16_t ops_unused = 0;
+       uint16_t burst_size;
+       uint16_t ops_needed;
+
+       uint64_t burst_enqueued = 0, total_enqueued = 0, burst_dequeued = 0;
+       uint64_t processed = 0, failed_polls = 0, retries = 0;
+       uint64_t tsc_start = 0, tsc_end = 0;
+
+       unsigned int digest_length = get_auth_digest_length(pparams->auth_algo);
+
+       struct rte_crypto_op *ops[pparams->burst_size];
+       struct rte_crypto_op *proc_ops[pparams->burst_size];
+
+       struct rte_mbuf *mbufs[pparams->burst_size * NUM_MBUF_SETS];
+
+       struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+       static struct rte_cryptodev_sym_session *sess;
+
+       if (rte_cryptodev_count() == 0) {
+               printf("\nNo crypto devices found. Is PMD build configured?\n");
+               return TEST_FAILED;
+       }
+
+       /* Create Crypto session*/
+       sess = test_perf_create_armv8_session(ts_params->dev_id,
+                       pparams->chain, pparams->cipher_algo,
+                       pparams->cipher_key_length, pparams->auth_algo);
+       TEST_ASSERT_NOT_NULL(sess, "Session creation failed");
+
+       /* Generate a burst of crypto operations */
+       for (i = 0; i < (pparams->burst_size * NUM_MBUF_SETS); i++) {
+               mbufs[i] = test_perf_create_pktmbuf(
+                               ts_params->mbuf_mp,
+                               pparams->buf_size);
+
+               if (mbufs[i] == NULL) {
+                       printf("\nFailed to get mbuf - freeing the rest.\n");
+                       for (k = 0; k < i; k++)
+                               rte_pktmbuf_free(mbufs[k]);
+                       return -1;
+               }
+       }
+
+       tsc_start = rte_rdtsc();
+
+       while (total_enqueued < pparams->total_operations) {
+               if ((total_enqueued + pparams->burst_size) <=
+                                       pparams->total_operations)
+                       burst_size = pparams->burst_size;
+               else
+                       burst_size = pparams->total_operations - total_enqueued;
+
+               ops_needed = burst_size - ops_unused;
+
+               if (ops_needed != rte_crypto_op_bulk_alloc(ts_params->op_mpool,
+                               RTE_CRYPTO_OP_TYPE_SYMMETRIC, ops, ops_needed)){
+                       printf("\nFailed to alloc enough ops, finish dequeuing "
+                               "and free ops below.");
+               } else {
+                       for (i = 0; i < ops_needed; i++)
+                               ops[i] = test_perf_set_crypto_op_aes(ops[i],
+                                       mbufs[i + (pparams->burst_size *
+                                               (j % NUM_MBUF_SETS))], sess,
+                                       pparams->buf_size, digest_length,
+                                       pparams->chain);
+
+                       /* enqueue burst */
+                       burst_enqueued = rte_cryptodev_enqueue_burst(dev_id,
+                                       queue_id, ops, burst_size);
+
+                       if (burst_enqueued < burst_size)
+                               retries++;
+
+                       ops_unused = burst_size - burst_enqueued;
+                       total_enqueued += burst_enqueued;
+               }
+
+               /* dequeue burst */
+               burst_dequeued = rte_cryptodev_dequeue_burst(dev_id, queue_id,
+                               proc_ops, pparams->burst_size);
+               if (burst_dequeued == 0)
+                       failed_polls++;
+               else {
+                       processed += burst_dequeued;
+
+                       for (l = 0; l < burst_dequeued; l++)
+                               rte_crypto_op_free(proc_ops[l]);
+               }
+               j++;
+       }
+
+       /* Dequeue any operations still in the crypto device */
+       while (processed < pparams->total_operations) {
+               /* Sending 0 length burst to flush sw crypto device */
+               rte_cryptodev_enqueue_burst(dev_id, queue_id, NULL, 0);
+
+               /* dequeue burst */
+               burst_dequeued = rte_cryptodev_dequeue_burst(dev_id, queue_id,
+                               proc_ops, pparams->burst_size);
+               if (burst_dequeued == 0)
+                       failed_polls++;
+               else {
+                       processed += burst_dequeued;
+
+                       for (m = 0; m < burst_dequeued; m++)
+                               rte_crypto_op_free(proc_ops[m]);
+               }
+       }
+
+       tsc_end = rte_rdtsc();
+
        double ops_s = ((double)processed / (tsc_end - tsc_start))
                                        * rte_get_tsc_hz();
        double throughput = (ops_s * pparams->buf_size * NUM_MBUF_SETS)
@@ -3687,6 +4036,125 @@ test_perf_openssl_vary_burst_size(void)
        return 0;
 }
 
+static int
+test_perf_armv8_vary_pkt_size(void)
+{
+       unsigned int total_operations = 100000;
+       unsigned int burst_size = { 64 };
+       unsigned int buf_lengths[] = { 64, 128, 256, 512, 768, 1024, 1280, 1536,
+                       1792, 2048 };
+       uint8_t i, j;
+
+       struct perf_test_params params_set[] = {
+               {
+                       .chain = CIPHER_HASH,
+
+                       .cipher_algo  = RTE_CRYPTO_CIPHER_AES_CBC,
+                       .cipher_key_length = 16,
+                       .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+               },
+               {
+                       .chain = HASH_CIPHER,
+
+                       .cipher_algo  = RTE_CRYPTO_CIPHER_AES_CBC,
+                       .cipher_key_length = 16,
+                       .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+               },
+               {
+                       .chain = CIPHER_HASH,
+
+                       .cipher_algo  = RTE_CRYPTO_CIPHER_AES_CBC,
+                       .cipher_key_length = 16,
+                       .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC
+               },
+               {
+                       .chain = HASH_CIPHER,
+
+                       .cipher_algo  = RTE_CRYPTO_CIPHER_AES_CBC,
+                       .cipher_key_length = 16,
+                       .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC
+               },
+       };
+
+       for (i = 0; i < RTE_DIM(params_set); i++) {
+               params_set[i].total_operations = total_operations;
+               params_set[i].burst_size = burst_size;
+               printf("\n%s. cipher algo: %s auth algo: %s cipher key size=%u."
+                               " burst_size: %d ops\n",
+                               chain_mode_name(params_set[i].chain),
+                               cipher_algo_name(params_set[i].cipher_algo),
+                               auth_algo_name(params_set[i].auth_algo),
+                               params_set[i].cipher_key_length,
+                               burst_size);
+               printf("\nBuffer Size(B)\tOPS(M)\tThroughput(Gbps)\tRetries\t"
+                               "EmptyPolls\n");
+               for (j = 0; j < RTE_DIM(buf_lengths); j++) {
+                       params_set[i].buf_size = buf_lengths[j];
+                       test_perf_armv8(testsuite_params.dev_id, 0,
+                                                       &params_set[i]);
+               }
+       }
+
+       return 0;
+}
+
+static int
+test_perf_armv8_vary_burst_size(void)
+{
+       unsigned int total_operations = 4096;
+       uint16_t buf_lengths[] = { 64 };
+       uint8_t i, j;
+
+       struct perf_test_params params_set[] = {
+               {
+                       .chain = CIPHER_HASH,
+
+                       .cipher_algo  = RTE_CRYPTO_CIPHER_AES_CBC,
+                       .cipher_key_length = 16,
+                       .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+               },
+               {
+                       .chain = HASH_CIPHER,
+
+                       .cipher_algo  = RTE_CRYPTO_CIPHER_AES_CBC,
+                       .cipher_key_length = 16,
+                       .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC
+               },
+               {
+                       .chain = CIPHER_HASH,
+
+                       .cipher_algo  = RTE_CRYPTO_CIPHER_AES_CBC,
+                       .cipher_key_length = 16,
+                       .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC
+               },
+               {
+                       .chain = HASH_CIPHER,
+
+                       .cipher_algo  = RTE_CRYPTO_CIPHER_AES_CBC,
+                       .cipher_key_length = 16,
+                       .auth_algo = RTE_CRYPTO_AUTH_SHA256_HMAC
+               },
+       };
+
+       printf("\n\nStart %s.", __func__);
+       printf("\nThis Test measures the average IA cycle cost using a "
+                       "constant request(packet) size. ");
+       printf("Cycle cost is only valid when indicators show device is "
+                       "not busy, i.e. Retries and EmptyPolls = 0");
+
+       for (i = 0; i < RTE_DIM(params_set); i++) {
+               printf("\n");
+               params_set[i].total_operations = total_operations;
+
+               for (j = 0; j < RTE_DIM(buf_lengths); j++) {
+                       params_set[i].buf_size = buf_lengths[j];
+                       test_perf_armv8_optimise_cyclecount(&params_set[i]);
+               }
+       }
+
+       return 0;
+}
+
 static int
 test_perf_aes_cbc_vary_burst_size(void)
 {
@@ -3980,6 +4448,7 @@ perf_AES_GCM(uint8_t dev_id, uint16_t queue_id,
 
        for (i = 0; i < burst; i++)
                rte_pktmbuf_free(mbufs[i]);
+       rte_cryptodev_sym_session_free(dev_id, sess);
 
        return 0;
 }
@@ -4238,6 +4707,19 @@ static struct unit_test_suite cryptodev_openssl_testsuite  = {
        }
 };
 
+static struct unit_test_suite cryptodev_armv8_testsuite  = {
+       .suite_name = "Crypto Device ARMv8 Unit Test Suite",
+       .setup = testsuite_setup,
+       .teardown = testsuite_teardown,
+       .unit_test_cases = {
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_perf_armv8_vary_pkt_size),
+               TEST_CASE_ST(ut_setup, ut_teardown,
+                               test_perf_armv8_vary_burst_size),
+               TEST_CASES_END() /**< NULL terminate unit test array */
+       }
+};
+
 static int
 perftest_aesni_gcm_cryptodev(void)
 {
@@ -4294,6 +4776,14 @@ perftest_qat_continual_cryptodev(void)
        return unit_test_suite_runner(&cryptodev_qat_continual_testsuite);
 }
 
+static int
+perftest_sw_armv8_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/)
+{
+       gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_ARMV8_PMD;
+
+       return unit_test_suite_runner(&cryptodev_armv8_testsuite);
+}
+
 REGISTER_TEST_COMMAND(cryptodev_aesni_mb_perftest, perftest_aesni_mb_cryptodev);
 REGISTER_TEST_COMMAND(cryptodev_qat_perftest, perftest_qat_cryptodev);
 REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_perftest, perftest_sw_snow3g_cryptodev);
@@ -4303,3 +4793,5 @@ REGISTER_TEST_COMMAND(cryptodev_openssl_perftest,
                perftest_openssl_cryptodev);
 REGISTER_TEST_COMMAND(cryptodev_qat_continual_perftest,
                perftest_qat_continual_cryptodev);
+REGISTER_TEST_COMMAND(cryptodev_sw_armv8_perftest,
+               perftest_sw_armv8_cryptodev);