mbuf: fix performance with 128-byte cache line
[dpdk.git] / app / test / test_pmd_ring.c
index 4d9c2ba..5568759 100644 (file)
@@ -1,13 +1,13 @@
 /*-
  *   BSD LICENSE
- * 
- *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *
+ *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
  *   All rights reserved.
- * 
+ *
  *   Redistribution and use in source and binary forms, with or without
  *   modification, are permitted provided that the following conditions
  *   are met:
- * 
+ *
  *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
@@ -17,7 +17,7 @@
  *     * Neither the name of Intel Corporation nor the names of its
  *       contributors may be used to endorse or promote products derived
  *       from this software without specific prior written permission.
- * 
+ *
  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  */
 #include "test.h"
 
-#ifdef RTE_LIBRTE_PMD_RING
-
 #include <stdio.h>
 
 #include <rte_eth_ring.h>
 #include <rte_ethdev.h>
 
-/* two test rings, r1 is used by two ports, r2 just by one */
-static struct rte_ring *r1[2], *r2;
-
-static struct rte_ring *nullring = NULL;
 static struct rte_mempool *mp;
-static uint8_t start_idx; /* will store the port id of the first of our new ports */
-
-#define TX_PORT (uint8_t)(start_idx + 1)
-#define RX_PORT (uint8_t)(start_idx + 2)
-#define RXTX_PORT (uint8_t)(start_idx + 3)
-#define RXTX_PORT2 (uint8_t)(start_idx + 4)
-#define RXTX_PORT4 (uint8_t)(start_idx + 6)
-#define RXTX_PORT5 (uint8_t)(start_idx + 7)
-#define SOCKET0 0
+static int tx_porta, rx_portb, rxtx_portc, rxtx_portd, rxtx_porte;
 
+#define SOCKET0 0
 #define RING_SIZE 256
-
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
-#define NB_MBUF   512
+#define NUM_RINGS 2
+#define NB_MBUF 512
 
 
 static int
-test_ring_ethdev_create(void)
+test_ethdev_configure_port(int port)
 {
-       int retval;
-       printf("Testing ring pmd create\n");
+       struct rte_eth_conf null_conf;
+       struct rte_eth_link link;
 
-       retval = rte_eth_from_rings(NULL, 0, NULL, 0, SOCKET0);
-       if (retval < 0) {
-               printf("Failure, failed to create zero-sized RXTX ring pmd\n");
-               return -1;
-       }
+       memset(&null_conf, 0, sizeof(struct rte_eth_conf));
 
-       retval = rte_eth_from_rings(NULL, 0, NULL, 0, RTE_MAX_NUMA_NODES);
-       if (retval >= 0) {
-               printf("Failure, can create ring pmd on socket %d\n", RTE_MAX_NUMA_NODES);
+       if (rte_eth_dev_configure(port, 1, 2, &null_conf) < 0) {
+               printf("Configure failed for port %d\n", port);
                return -1;
        }
 
-       retval = rte_eth_from_rings(NULL, 1, &r2, 1, SOCKET0);
-       if (retval >= 0) {
-               printf("Failure, can create pmd with null rx rings\n");
+       /* Test queue release */
+       if (rte_eth_dev_configure(port, 1, 1, &null_conf) < 0) {
+               printf("Configure failed for port %d\n", port);
                return -1;
        }
 
-       retval = rte_eth_from_rings(r1, 1, NULL, 1, SOCKET0);
-       if (retval >= 0) {
-               printf("Failure, can create pmd with null tx rings\n");
+       if (rte_eth_tx_queue_setup(port, 0, RING_SIZE, SOCKET0, NULL) < 0) {
+               printf("TX queue setup failed port %d\n", port);
                return -1;
        }
 
-       retval = rte_eth_from_rings(&nullring, 1, r1, 2, SOCKET0);
-       if (retval < 0) {
-               printf("Failure, failed to create TX-only ring pmd\n");
+       if (rte_eth_rx_queue_setup(port, 0, RING_SIZE, SOCKET0,
+                       NULL, mp) < 0) {
+               printf("RX queue setup failed port %d\n", port);
                return -1;
        }
 
-       retval = rte_eth_from_rings(r1, 1, &nullring, 1, SOCKET0);
-       if (retval < 0) {
-               printf("Failure, failed to create RX-only ring pmd\n");
+       if (rte_eth_dev_start(port) < 0) {
+               printf("Error starting port %d\n", port);
                return -1;
        }
 
-       retval = rte_eth_from_rings(&r2, 1, &r2, 1, SOCKET0);
-       if (retval < 0) {
-               printf("Failure, failed to create RXTX ring pmd\n");
-               return -1;
-       }
+       rte_eth_link_get(port, &link);
 
        return 0;
 }
 
 static int
-test_ethdev_configure(void)
+test_send_basic_packets(void)
 {
-       struct rte_eth_conf null_conf;
-       struct rte_eth_link link;
+       struct rte_mbuf  bufs[RING_SIZE];
+       struct rte_mbuf *pbufs[RING_SIZE];
+       int i;
 
-       memset(&null_conf, 0, sizeof(struct rte_eth_conf));
-       
-       if ((TX_PORT >= RTE_MAX_ETHPORTS) || (RX_PORT >= RTE_MAX_ETHPORTS)\
-               || (RXTX_PORT >= RTE_MAX_ETHPORTS)) {
-               printf(" TX/RX port exceed max eth ports\n");
-               return -1;
-       }
-       if (rte_eth_dev_configure(TX_PORT, 1, 2, &null_conf) < 0) {
-               printf("Configure failed for TX port\n");
-               return -1;
-       }
+       printf("Testing send and receive RING_SIZE/2 packets (tx_porta -> rx_portb)\n");
 
-       /* Test queue release */
-       if (rte_eth_dev_configure(TX_PORT, 1, 1, &null_conf) < 0) {
-               printf("Configure failed for TX port\n");
-               return -1;
-       }
-       if (rte_eth_dev_configure(RX_PORT, 1, 1, &null_conf) < 0) {
-               printf("Configure failed for RX port\n");
-               return -1;
-       }
-       if (rte_eth_dev_configure(RXTX_PORT, 1, 1, &null_conf) < 0) {
-               printf("Configure failed for RX port\n");
-               return -1;
-       }
+       for (i = 0; i < RING_SIZE/2; i++)
+               pbufs[i] = &bufs[i];
 
-       if (rte_eth_tx_queue_setup(TX_PORT, 0, RING_SIZE, SOCKET0, NULL) < 0) {
-               printf("TX queue setup failed\n");
-               return -1;
-       }
-       if (rte_eth_rx_queue_setup(RX_PORT, 0, RING_SIZE, SOCKET0,
-                       NULL, mp) < 0) {
-               printf("RX queue setup failed\n");
-               return -1;
-       }
-       if (rte_eth_tx_queue_setup(RXTX_PORT, 0, RING_SIZE, SOCKET0, NULL) < 0) {
-               printf("TX queue setup failed\n");
-               return -1;
-       }
-       if (rte_eth_rx_queue_setup(RXTX_PORT, 0, RING_SIZE, SOCKET0,
-                       NULL, mp) < 0) {
-               printf("RX queue setup failed\n");
+       if (rte_eth_tx_burst(tx_porta, 0, pbufs, RING_SIZE/2) < RING_SIZE/2) {
+               printf("Failed to transmit packet burst port %d\n", tx_porta);
                return -1;
        }
 
-       if (rte_eth_dev_start(TX_PORT) < 0) {
-               printf("Error starting TX port\n");
-               return -1;
-       }
-       if (rte_eth_dev_start(RX_PORT) < 0) {
-               printf("Error starting RX port\n");
-               return -1;
-       }
-       if (rte_eth_dev_start(RXTX_PORT) < 0) {
-               printf("Error starting RX port\n");
+       if (rte_eth_rx_burst(rx_portb, 0, pbufs, RING_SIZE) != RING_SIZE/2) {
+               printf("Failed to receive packet burst on port %d\n", rx_portb);
                return -1;
        }
 
-       rte_eth_link_get(TX_PORT, &link);
-       rte_eth_link_get(RX_PORT, &link);
-       rte_eth_link_get(RXTX_PORT, &link);
+       for (i = 0; i < RING_SIZE/2; i++)
+               if (pbufs[i] != &bufs[i]) {
+                       printf("Error: received data does not match that transmitted\n");
+                       return -1;
+               }
 
        return 0;
 }
 
 static int
-test_send_basic_packets(void)
+test_send_basic_packets_port(int port)
 {
        struct rte_mbuf  bufs[RING_SIZE];
        struct rte_mbuf *pbufs[RING_SIZE];
        int i;
 
-       printf("Testing ring pmd RX/TX\n");
+       printf("Testing send and receive RING_SIZE/2 packets (cmdl_port0 -> cmdl_port0)\n");
 
        for (i = 0; i < RING_SIZE/2; i++)
                pbufs[i] = &bufs[i];
 
-       if (rte_eth_tx_burst(TX_PORT, 0, pbufs, RING_SIZE/2) < RING_SIZE/2) {
-               printf("Failed to transmit packet burst\n");
+       if (rte_eth_tx_burst(port, 0, pbufs, RING_SIZE/2) < RING_SIZE/2) {
+               printf("Failed to transmit packet burst port %d\n", port);
                return -1;
        }
 
-       if (rte_eth_rx_burst(RX_PORT, 0, pbufs, RING_SIZE) != RING_SIZE/2) {
-               printf("Failed to receive packet burst\n");
+       if (rte_eth_rx_burst(port, 0, pbufs, RING_SIZE) != RING_SIZE/2) {
+               printf("Failed to receive packet burst on port %d\n", port);
                return -1;
        }
 
@@ -213,398 +148,376 @@ test_send_basic_packets(void)
        return 0;
 }
 
+
 static int
-test_get_stats(void)
+test_get_stats(int port)
 {
        struct rte_eth_stats stats;
        struct rte_mbuf buf, *pbuf = &buf;
 
-       printf("Testing ring PMD stats\n");
+       printf("Testing ring PMD stats_get port %d\n", port);
 
        /* check stats of RXTX port, should all be zero */
-       rte_eth_stats_get(RXTX_PORT, &stats);
+
+       rte_eth_stats_get(port, &stats);
        if (stats.ipackets != 0 || stats.opackets != 0 ||
                        stats.ibytes != 0 || stats.obytes != 0 ||
                        stats.ierrors != 0 || stats.oerrors != 0) {
-               printf("Error: RXTX port stats are not zero\n");
+               printf("Error: port %d stats are not zero\n", port);
                return -1;
        }
 
        /* send and receive 1 packet and check for stats update */
-       if (rte_eth_tx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) {
-               printf("Error sending packet to RXTX port\n");
+       if (rte_eth_tx_burst(port, 0, &pbuf, 1) != 1) {
+               printf("Error sending packet to port %d\n", port);
                return -1;
        }
-       if (rte_eth_rx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) {
-               printf("Error receiving packet from RXTX port\n");
+
+       if (rte_eth_rx_burst(port, 0, &pbuf, 1) != 1) {
+               printf("Error receiving packet from port %d\n", port);
                return -1;
        }
 
-       rte_eth_stats_get(RXTX_PORT, &stats);
+       rte_eth_stats_get(port, &stats);
        if (stats.ipackets != 1 || stats.opackets != 1 ||
                        stats.ibytes != 0 || stats.obytes != 0 ||
                        stats.ierrors != 0 || stats.oerrors != 0) {
-               printf("Error: RXTX port stats are not as expected\n");
+               printf("Error: port %d stats are not as expected\n", port);
                return -1;
        }
        return 0;
 }
 
 static int
-test_stats_reset(void)
+test_stats_reset(int port)
 {
        struct rte_eth_stats stats;
        struct rte_mbuf buf, *pbuf = &buf;
 
-       printf("Testing ring PMD stats reset\n");
+       printf("Testing ring PMD stats_reset port %d\n", port);
+
+       rte_eth_stats_reset(port);
 
-       rte_eth_stats_reset(RXTX_PORT);
-       
        /* check stats of RXTX port, should all be zero */
-       rte_eth_stats_get(RXTX_PORT, &stats);
+       rte_eth_stats_get(port, &stats);
        if (stats.ipackets != 0 || stats.opackets != 0 ||
                        stats.ibytes != 0 || stats.obytes != 0 ||
                        stats.ierrors != 0 || stats.oerrors != 0) {
-               printf("Error: RXTX port stats are not zero\n");
+               printf("Error: port %d stats are not zero\n", port);
                return -1;
        }
 
        /* send and receive 1 packet and check for stats update */
-       if (rte_eth_tx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) {
-               printf("Error sending packet to RXTX port\n");
+       if (rte_eth_tx_burst(port, 0, &pbuf, 1) != 1) {
+               printf("Error sending packet to port %d\n", port);
                return -1;
        }
 
-       if (rte_eth_rx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) {
-               printf("Error receiving packet from RXTX port\n");
+       if (rte_eth_rx_burst(port, 0, &pbuf, 1) != 1) {
+               printf("Error receiving packet from port %d\n", port);
                return -1;
        }
 
-       rte_eth_stats_get(RXTX_PORT, &stats);
+       rte_eth_stats_get(port, &stats);
        if (stats.ipackets != 1 || stats.opackets != 1 ||
                        stats.ibytes != 0 || stats.obytes != 0 ||
                        stats.ierrors != 0 || stats.oerrors != 0) {
-               printf("Error: RXTX port stats are not as expected\n");
+               printf("Error: port %d stats are not as expected\n", port);
                return -1;
        }
 
-       rte_eth_stats_reset(RXTX_PORT);
-       
+       rte_eth_stats_reset(port);
+
        /* check stats of RXTX port, should all be zero */
-       rte_eth_stats_get(RXTX_PORT, &stats);
+       rte_eth_stats_get(port, &stats);
        if (stats.ipackets != 0 || stats.opackets != 0 ||
                        stats.ibytes != 0 || stats.obytes != 0 ||
                        stats.ierrors != 0 || stats.oerrors != 0) {
-               printf("Error: RXTX port stats are not zero\n");
+               printf("Error: port %d stats are not zero\n", port);
                return -1;
        }
 
        return 0;
 }
 
-static int 
-test_pmd_ring_init(void)
+static int
+test_pmd_ring_pair_create_attach(int portd, int porte)
 {
-       const char * name1 = "R3";
-       const char * name2 = "R4";
-       const char * params_null = NULL;
-       const char * params = "PARAMS";
-       struct rte_eth_stats stats;
+       struct rte_eth_stats stats, stats2;
        struct rte_mbuf buf, *pbuf = &buf;
        struct rte_eth_conf null_conf;
 
-       printf("Testing ring pmd init\n");
-
-       if (rte_pmd_ring_devinit(name1, params_null) < 0) {
-               printf("Testing ring pmd init fail\n");
-               return -1;
-       }
-
-       if (rte_pmd_ring_devinit(name2, params) < 0) {
-               printf("Testing ring pmd init fail\n");
-               return -1;
-       }
-
-       if (RXTX_PORT2 >= RTE_MAX_ETHPORTS) {
-               printf(" TX/RX port exceed max eth ports\n");
-               return -1;
-       }
-       if (rte_eth_dev_configure(RXTX_PORT2, 1, 1, &null_conf) < 0) {
-               printf("Configure failed for RXTX port\n");
+       if ((rte_eth_dev_configure(portd, 1, 1, &null_conf) < 0)
+               || (rte_eth_dev_configure(porte, 1, 1, &null_conf) < 0)) {
+               printf("Configure failed for port\n");
                return -1;
        }
 
-       if (rte_eth_tx_queue_setup(RXTX_PORT2, 0, RING_SIZE, SOCKET0, NULL) < 0) {
+       if ((rte_eth_tx_queue_setup(portd, 0, RING_SIZE, SOCKET0, NULL) < 0)
+               || (rte_eth_tx_queue_setup(porte, 0, RING_SIZE, SOCKET0, NULL) < 0)) {
                printf("TX queue setup failed\n");
                return -1;
        }
 
-       if (rte_eth_rx_queue_setup(RXTX_PORT2, 0, RING_SIZE, SOCKET0,
-                       NULL, mp) < 0) {
+       if ((rte_eth_rx_queue_setup(portd, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)
+               || (rte_eth_rx_queue_setup(porte, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)) {
                printf("RX queue setup failed\n");
                return -1;
        }
 
-       if (rte_eth_dev_start(RXTX_PORT2) < 0) {
-               printf("Error starting RX port\n");
-               return -1;
-       }
-
-       /* send and receive 1 packet and check for stats update */
-       if (rte_eth_tx_burst(RXTX_PORT2, 0, &pbuf, 1) != 1) {
-               printf("Error sending packet to RXTX port\n");
-               return -1;
-       }
-
-       if (rte_eth_rx_burst(RXTX_PORT2, 0, &pbuf, 1) != 1) {
-               printf("Error receiving packet from RXTX port\n");
+       if ((rte_eth_dev_start(portd) < 0)
+               || (rte_eth_dev_start(porte) < 0)) {
+               printf("Error starting port\n");
                return -1;
        }
 
-       rte_eth_stats_get(RXTX_PORT2, &stats);
-       if (stats.ipackets != 1 || stats.opackets != 1 ||
+       rte_eth_stats_reset(portd);
+       /* check stats of port, should all be zero */
+       rte_eth_stats_get(portd, &stats);
+       if (stats.ipackets != 0 || stats.opackets != 0 ||
                        stats.ibytes != 0 || stats.obytes != 0 ||
                        stats.ierrors != 0 || stats.oerrors != 0) {
-               printf("Error: RXTX port stats are not as expected\n");
+               printf("Error: port %d stats are not zero\n", portd);
                return -1;
        }
 
-       rte_eth_dev_stop(RXTX_PORT2);
-
-       /* Test init same name pmd ring */
-       rte_pmd_ring_devinit(name1, params_null);
-       return 0;
-}
-
-static int
-test_pmd_ring_pair_create(void)
-{
-       const char * name1 = "_RNG_P0";
-       struct rte_eth_stats stats, stats2;
-       struct rte_mbuf buf, *pbuf = &buf;
-       struct rte_eth_conf null_conf;
-
-       if (rte_eth_ring_pair_create(name1, SOCKET0) < 0) {
-               printf("Create ring pair failed\n");
+       rte_eth_stats_reset(porte);
+       /* check stats of port, should all be zero */
+       rte_eth_stats_get(porte, &stats2);
+       if (stats2.ipackets != 0 || stats2.opackets != 0 ||
+                       stats2.ibytes != 0 || stats2.obytes != 0 ||
+                       stats2.ierrors != 0 || stats2.oerrors != 0) {
+               printf("Error: port %d stats are not zero\n", porte);
                return -1;
        }
 
-       if ((RXTX_PORT4 >= RTE_MAX_ETHPORTS) || (RXTX_PORT5 >= RTE_MAX_ETHPORTS)) {
-               printf(" TX/RX port exceed max eth ports\n");
-               return -1;
-       }
-       if ((rte_eth_dev_configure(RXTX_PORT4, 1, 1, &null_conf) < 0)
-               || (rte_eth_dev_configure(RXTX_PORT5, 1, 1, &null_conf) < 0)) {
-               printf("Configure failed for RXTX port\n");
+       /*
+        * send and receive 1 packet (portd -> porte)
+        * and check for stats update
+        */
+       printf("Testing send and receive 1 packet (portd -> porte)\n");
+       if (rte_eth_tx_burst(portd, 0, &pbuf, 1) != 1) {
+               printf("Error sending packet to port %d\n", portd);
                return -1;
        }
 
-       if ((rte_eth_tx_queue_setup(RXTX_PORT4, 0, RING_SIZE, SOCKET0, NULL) < 0)
-               || (rte_eth_tx_queue_setup(RXTX_PORT5, 0, RING_SIZE, SOCKET0, NULL) < 0)) {
-               printf("TX queue setup failed\n");
+       if (rte_eth_rx_burst(porte, 0, &pbuf, 1) != 1) {
+               printf("Error receiving packet from port %d\n", porte);
                return -1;
        }
 
-       if ((rte_eth_rx_queue_setup(RXTX_PORT4, 0, RING_SIZE, SOCKET0, NULL, mp) < 0) 
-               || (rte_eth_rx_queue_setup(RXTX_PORT5, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)) {
-               printf("RX queue setup failed\n");
+       rte_eth_stats_get(portd, &stats);
+       rte_eth_stats_get(porte, &stats2);
+       if (stats.ipackets != 0 || stats.opackets != 1 ||
+                       stats.ibytes != 0 || stats.obytes != 0 ||
+                       stats.ierrors != 0 || stats.oerrors != 0) {
+               printf("Error: port %d stats are not as expected\n", portd);
                return -1;
        }
 
-       if ((rte_eth_dev_start(RXTX_PORT4) < 0) 
-               || (rte_eth_dev_start(RXTX_PORT5) < 0)) {
-               printf("Error starting RXTX port\n");
+       if (stats2.ipackets != 1 || stats2.opackets != 0 ||
+                       stats2.ibytes != 0 || stats2.obytes != 0 ||
+                       stats2.ierrors != 0 || stats2.oerrors != 0) {
+               printf("Error: port %d stats are not as expected\n", porte);
                return -1;
        }
 
-       /* send and receive 1 packet and check for stats update */
-       if (rte_eth_tx_burst(RXTX_PORT4, 0, &pbuf, 1) != 1) {
-               printf("Error sending packet to RXTX port\n");
+       /*
+        * send and receive 1 packet (porte -> portd)
+        * and check for stats update
+        */
+       printf("Testing send and receive 1 packet (porte -> portd)\n");
+       if (rte_eth_tx_burst(porte, 0, &pbuf, 1) != 1) {
+               printf("Error sending packet to port %d\n", porte);
                return -1;
        }
 
-       if (rte_eth_rx_burst(RXTX_PORT5, 0, &pbuf, 1) != 1) {
-               printf("Error receiving packet from RXTX port\n");
+       if (rte_eth_rx_burst(portd, 0, &pbuf, 1) != 1) {
+               printf("Error receiving packet from port %d\n", portd);
                return -1;
        }
 
-       rte_eth_stats_get(RXTX_PORT4, &stats);
-       rte_eth_stats_get(RXTX_PORT5, &stats2);
-       if (stats.ipackets != 0 || stats.opackets != 1 ||
+       rte_eth_stats_get(portd, &stats);
+       rte_eth_stats_get(porte, &stats2);
+       if (stats.ipackets != 1 || stats.opackets != 1 ||
                        stats.ibytes != 0 || stats.obytes != 0 ||
                        stats.ierrors != 0 || stats.oerrors != 0) {
-               printf("Error: RXTX port stats are not as expected\n");
+               printf("Error: port %d stats are not as expected\n", portd);
                return -1;
        }
 
-       if (stats2.ipackets != 1 || stats2.opackets != 0 ||
+       if (stats2.ipackets != 1 || stats2.opackets != 1 ||
                        stats2.ibytes != 0 || stats2.obytes != 0 ||
                        stats2.ierrors != 0 || stats2.oerrors != 0) {
-               printf("Error: RXTX port stats are not as expected\n");
-               return -1;
-       }
-
-       rte_eth_dev_stop(RXTX_PORT4);
-       rte_eth_dev_stop(RXTX_PORT5);
-
-       /* Test create same name ring pair */
-       if (rte_eth_ring_pair_create(name1, SOCKET0) == 0) {
-               printf("Create same name ring pair error\n");
+               printf("Error: port %d stats are not as expected\n", porte);
                return -1;
        }
-       return 0;
-}
-
-static int
-test_pmd_ring_pair_attach(void)
-{
-       const char * name1 = "_RNG_P0";
-       const char * name2 = "_RNG_P1";
-       struct rte_eth_stats stats, stats2;
-       struct rte_mbuf buf, *pbuf = &buf;
-       struct rte_eth_conf null_conf;
 
-       if (rte_eth_ring_pair_attach(name1, SOCKET0) < 0) {
-               printf("Attach ring pair failed\n");
+       /*
+        * send and receive 1 packet (portd -> portd)
+        * and check for stats update
+        */
+       printf("Testing send and receive 1 packet (portd -> portd)\n");
+       if (rte_eth_tx_burst(portd, 0, &pbuf, 1) != 1) {
+               printf("Error sending packet to port %d\n", portd);
                return -1;
        }
 
-       if ((RXTX_PORT4 >= RTE_MAX_ETHPORTS) || (RXTX_PORT5 >= RTE_MAX_ETHPORTS)) {
-               printf(" TX/RX port exceed max eth ports\n");
-               return -1;
-       }
-       if ((rte_eth_dev_configure(RXTX_PORT4, 1, 1, &null_conf) < 0)
-               || (rte_eth_dev_configure(RXTX_PORT5, 1, 1, &null_conf) < 0)) {
-               printf("Configure failed for RXTX port\n");
+       if (rte_eth_rx_burst(portd, 0, &pbuf, 1) != 1) {
+               printf("Error receiving packet from port %d\n", porte);
                return -1;
        }
 
-       if ((rte_eth_tx_queue_setup(RXTX_PORT4, 0, RING_SIZE, SOCKET0, NULL) < 0)
-               || (rte_eth_tx_queue_setup(RXTX_PORT5, 0, RING_SIZE, SOCKET0, NULL) < 0)) {
-               printf("TX queue setup failed\n");
+       rte_eth_stats_get(portd, &stats);
+       rte_eth_stats_get(porte, &stats2);
+       if (stats.ipackets != 2 || stats.opackets != 2 ||
+                       stats.ibytes != 0 || stats.obytes != 0 ||
+                       stats.ierrors != 0 || stats.oerrors != 0) {
+               printf("Error: port %d stats are not as expected\n", portd);
                return -1;
        }
 
-       if ((rte_eth_rx_queue_setup(RXTX_PORT4, 0, RING_SIZE, SOCKET0, NULL, mp) < 0) 
-               || (rte_eth_rx_queue_setup(RXTX_PORT5, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)) {
-               printf("RX queue setup failed\n");
+       if (stats2.ipackets != 1 || stats2.opackets != 1 ||
+                       stats2.ibytes != 0 || stats2.obytes != 0 ||
+                       stats2.ierrors != 0 || stats2.oerrors != 0) {
+               printf("Error: port %d stats are not as expected\n", porte);
                return -1;
        }
 
-       if ((rte_eth_dev_start(RXTX_PORT4) < 0) 
-               || (rte_eth_dev_start(RXTX_PORT5) < 0)) {
-               printf("Error starting RXTX port\n");
+       /*
+        * send and receive 1 packet (porte -> porte)
+        * and check for stats update
+        */
+       printf("Testing send and receive 1 packet (porte -> porte)\n");
+       if (rte_eth_tx_burst(porte, 0, &pbuf, 1) != 1) {
+               printf("Error sending packet to port %d\n", porte);
                return -1;
        }
-       
-       rte_eth_stats_reset(RXTX_PORT4);
-       rte_eth_stats_reset(RXTX_PORT5);
 
-       /* send and receive 1 packet and check for stats update */
-       if (rte_eth_tx_burst(RXTX_PORT4, 0, &pbuf, 1) != 1) {
-               printf("Error sending packet to RXTX port\n");
-               return -1;
-       }
-       if (rte_eth_rx_burst(RXTX_PORT5, 0, &pbuf, 1) != 1) {
-               printf("Error receiving packet from RXTX port\n");
+       if (rte_eth_rx_burst(porte, 0, &pbuf, 1) != 1) {
+               printf("Error receiving packet from port %d\n", porte);
                return -1;
        }
 
-       rte_eth_stats_get(RXTX_PORT4, &stats);
-       rte_eth_stats_get(RXTX_PORT5, &stats2);
-       if (stats.ipackets != 0 || stats.opackets != 1 ||
+       rte_eth_stats_get(portd, &stats);
+       rte_eth_stats_get(porte, &stats2);
+       if (stats.ipackets != 2 || stats.opackets != 2 ||
                        stats.ibytes != 0 || stats.obytes != 0 ||
                        stats.ierrors != 0 || stats.oerrors != 0) {
-               printf("Error: RXTX port stats are not as expected\n");
+               printf("Error: port %d stats are not as expected\n", portd);
                return -1;
        }
 
-       if (stats2.ipackets != 1 || stats2.opackets != 0 ||
+       if (stats2.ipackets != 2 || stats2.opackets != 2 ||
                        stats2.ibytes != 0 || stats2.obytes != 0 ||
                        stats2.ierrors != 0 || stats2.oerrors != 0) {
-               printf("Error: RXTX port stats are not as expected\n");
+               printf("Error: port %d stats are not as expected\n", porte);
                return -1;
        }
 
-       rte_eth_dev_stop(RXTX_PORT4);
-       rte_eth_dev_stop(RXTX_PORT5);
-       
-       /* Test attach non-existing ring pair */
-       if (rte_eth_ring_pair_attach(name2, SOCKET0) == 0) {
-               printf("Attach non-existing ring pair error\n");
-               return -1;
-       }
+       rte_eth_dev_stop(portd);
+       rte_eth_dev_stop(porte);
+
        return 0;
 }
 
-int
+static int
 test_pmd_ring(void)
 {
-       r1[0] = rte_ring_create("R1", RING_SIZE, 0, 0);
-       r1[1] = rte_ring_create("R2", RING_SIZE, 0, 0);
-       if (r1[0] == NULL && (r1[0] = rte_ring_lookup("R1")) == NULL)
-               return -1;
-       if (r1[1] == NULL && (r1[1] = rte_ring_lookup("R2")) == NULL)
-               return -1;
+       struct rte_ring *rxtx[NUM_RINGS];
+       int cmdl_port0 = 0;
+       uint8_t nb_ports;
+
+       nb_ports = rte_eth_dev_count();
+       printf("nb_ports=%d\n", (int)nb_ports);
 
-       r2 = rte_ring_create("R3", RING_SIZE, 0, RING_F_SP_ENQ|RING_F_SC_DEQ);
-       if (r2 == NULL && (r2 = rte_ring_lookup("R3")) == NULL)
+       /*  create the rings and eth_rings in the test code.
+        *  This does not test the rte_pmd_ring_devinit function.
+        *
+        *  Test with the command line option --vdev=eth_ring0 to test rte_pmd_ring_devinit.
+        */
+       rxtx[0] = rte_ring_create("R0", RING_SIZE, SOCKET0, RING_F_SP_ENQ|RING_F_SC_DEQ);
+       if (rxtx[0] == NULL) {
+               printf("rte_ring_create R0 failed");
                return -1;
+       }
 
-       mp = rte_mempool_create("mbuf_pool", NB_MBUF,
-                       MBUF_SIZE, 32,
-                       sizeof(struct rte_pktmbuf_pool_private),
-                       rte_pktmbuf_pool_init, NULL,
-                       rte_pktmbuf_init, NULL,
-                       rte_socket_id(), 0);
-       if (mp == NULL)
+       rxtx[1] = rte_ring_create("R1", RING_SIZE, SOCKET0, RING_F_SP_ENQ|RING_F_SC_DEQ);
+       if (rxtx[1] == NULL) {
+               printf("rte_ring_create R1 failed");
                return -1;
+       }
 
-       start_idx = rte_eth_dev_count();
+       tx_porta = rte_eth_from_rings("eth_ringa", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
+       rx_portb = rte_eth_from_rings("eth_ringb", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
+       rxtx_portc = rte_eth_from_rings("eth_ringc", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
+       rxtx_portd = rte_eth_from_rings("eth_ringd", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
+       rxtx_porte = rte_eth_from_rings("eth_ringe", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0);
 
-       if ((TX_PORT >= RTE_MAX_ETHPORTS) || (RX_PORT >= RTE_MAX_ETHPORTS)\
-               || (RXTX_PORT >= RTE_MAX_ETHPORTS)) {
-               printf(" TX/RX port exceed max eth ports\n");
+       printf("tx_porta=%d rx_portb=%d rxtx_portc=%d rxtx_portd=%d rxtx_porte=%d\n",
+                       tx_porta, rx_portb, rxtx_portc, rxtx_portd, rxtx_porte);
+
+       if ((tx_porta == -1) || (rx_portb == -1) || (rxtx_portc == -1)
+               || (rxtx_portd == -1) || (rxtx_porte == -1)) {
+               printf("rte_eth_from rings failed\n");
                return -1;
        }
 
-       if (test_ring_ethdev_create() < 0)
+       mp = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
+               0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+       if (mp == NULL)
                return -1;
 
-       if (test_ethdev_configure() < 0)
+       if ((tx_porta >= RTE_MAX_ETHPORTS) || (rx_portb >= RTE_MAX_ETHPORTS)
+               || (rxtx_portc >= RTE_MAX_ETHPORTS)
+               || (rxtx_portd >= RTE_MAX_ETHPORTS)
+               || (rxtx_porte >= RTE_MAX_ETHPORTS)) {
+               printf(" port exceed max eth ports\n");
                return -1;
+       }
 
-       if (test_send_basic_packets() < 0)
+       if (test_ethdev_configure_port(tx_porta) < 0)
                return -1;
 
-       if (test_get_stats() < 0)
+       if (test_ethdev_configure_port(rx_portb) < 0)
                return -1;
 
-       if (test_stats_reset() < 0)
+       if (test_ethdev_configure_port(rxtx_portc) < 0)
                return -1;
 
-       rte_eth_dev_stop(RX_PORT);
-       rte_eth_dev_stop(TX_PORT);
-       rte_eth_dev_stop(RXTX_PORT);
+       if (test_send_basic_packets() < 0)
+               return -1;
 
-       if (test_pmd_ring_init() < 0)
+       if (test_get_stats(rxtx_portc) < 0)
                return -1;
 
-       if (test_pmd_ring_pair_create() < 0)
+       if (test_stats_reset(rxtx_portc) < 0)
                return -1;
 
-       if (test_pmd_ring_pair_attach() < 0)
-               return -1;      
-       return 0;
-}
+       rte_eth_dev_stop(tx_porta);
+       rte_eth_dev_stop(rx_portb);
+       rte_eth_dev_stop(rxtx_portc);
 
-#else
+       if (test_pmd_ring_pair_create_attach(rxtx_portd, rxtx_porte) < 0)
+               return -1;
 
-int
-test_pmd_ring(void)
-{
+       if (nb_ports > 0) {
+               /* test port 0 created with the --vdev=eth_ring0 command line option */
+               if (test_ethdev_configure_port(cmdl_port0) < 0)
+                       return -1;
+               if (test_send_basic_packets_port(cmdl_port0) < 0)
+                       return -1;
+               if (test_stats_reset(cmdl_port0) < 0)
+                       return -1;
+               if (test_get_stats(cmdl_port0) < 0)
+                       return -1;
+               rte_eth_dev_stop(cmdl_port0);
+       }
        return 0;
 }
 
-#endif
-
+static struct test_command ring_pmd_cmd = {
+       .command = "ring_pmd_autotest",
+       .callback = test_pmd_ring,
+};
+REGISTER_TEST_COMMAND(ring_pmd_cmd);