config: add static linkage of mlx dependency

[dpdk.git] / config / common_base

diff --git a/config/common_base b/config/common_base
index b68278b..7c6da51 100644 (file)
--- a/config/common_base
+++ b/config/common_base
@@ -297,6 +297,15 @@ CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
 CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
 
 #
+# Compile burst-oriented ICE PMD driver
+#
+CONFIG_RTE_LIBRTE_ICE_PMD=y
+CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
+CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
+
 # Compile burst-oriented AVF PMD driver
 #
 CONFIG_RTE_LIBRTE_AVF_PMD=y
@@ -311,15 +320,19 @@ CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
 #
 CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
 
 #
-# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
-# (MLX5) PMD
+# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
+# ConnectX-6 & Bluefield (MLX5) PMD
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
+
+# Linking method for mlx4/5 dependency on ibverbs and related libraries
+# Default linking is dynamic by linker.
+# Other options are: dynamic by dlopen at run-time, or statically embedded.
+CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
+CONFIG_RTE_IBVERBS_LINK_STATIC=n
 
 #
 # Compile burst-oriented Netronome NFP PMD driver
@@ -481,7 +494,7 @@ CONFIG_RTE_PMD_PACKET_PREFETCH=y
 #
 CONFIG_RTE_LIBRTE_BBDEV=y
 CONFIG_RTE_BBDEV_MAX_DEVS=128
-CONFIG_RTE_BBDEV_OFFLOAD_COST=n
+CONFIG_RTE_BBDEV_OFFLOAD_COST=y
 
 #
 # Compile PMD for NULL bbdev device
@@ -787,6 +800,11 @@ CONFIG_RTE_LIBRTE_BITRATE=y
 #
 CONFIG_RTE_LIBRTE_LATENCY_STATS=y
 
+#
+# Compile librte_telemetry
+#
+CONFIG_RTE_LIBRTE_TELEMETRY=n
+
 #
 # Compile librte_lpm
 #
@@ -920,6 +938,11 @@ CONFIG_RTE_LIBRTE_BPF=y
 # allow load BPF from ELF files (requires libelf)
 CONFIG_RTE_LIBRTE_BPF_ELF=n
 
+#
+# Compile librte_ipsec
+#
+CONFIG_RTE_LIBRTE_IPSEC=y
+
 #
 # Compile the test application
 #
@@ -943,6 +966,11 @@ CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
 #
 CONFIG_RTE_TEST_BBDEV=y
 
+#
+# Compile the compression performance application
+#
+CONFIG_RTE_APP_COMPRESS_PERF=y
+
 #
 # Compile the crypto performance application
 #