-# BSD LICENSE
-#
-# Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2017 Intel Corporation
#
# define executive environment
#
CONFIG_RTE_CACHE_LINE_SIZE=64
+#
+# Memory model
+#
+CONFIG_RTE_USE_C11_MEM_MODEL=n
+
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
-CONFIG_RTE_MAX_MEMSEG=256
+CONFIG_RTE_MAX_HEAPS=32
+CONFIG_RTE_MAX_MEMSEG_LISTS=64
+# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
+# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
+CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
+CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
+# a "type" is a combination of page size and NUMA node. total number of memseg
+# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
+# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
+# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
+# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
+CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
+CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
+# global maximum usable amount of VA, in megabytes
+CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
+CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
+CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
-CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS=n
+CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
+#
+# Common libraries, before Bus/PMDs
+#
+CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
+
+#
+# Compile the Intel FPGA bus
+#
+CONFIG_RTE_LIBRTE_IFPGA_BUS=y
+
#
# Compile PCI bus driver
#
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
+#
+# Compile ARK PMD
+#
+CONFIG_RTE_LIBRTE_ARK_PMD=y
+CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
+CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
+CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
+
+#
+# Compile Aquantia Atlantic PMD driver
+#
+CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
+
+#
+# Compile AMD PMD
+#
+CONFIG_RTE_LIBRTE_AXGBE_PMD=y
+CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
+
+#
+# Compile burst-oriented Broadcom PMD driver
+#
+CONFIG_RTE_LIBRTE_BNX2X_PMD=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
+
+#
+# Compile burst-oriented Broadcom BNXT PMD driver
+#
+CONFIG_RTE_LIBRTE_BNXT_PMD=y
+
+#
+# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
+#
+CONFIG_RTE_LIBRTE_CXGBE_PMD=y
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
+
+# NXP DPAA Bus
+CONFIG_RTE_LIBRTE_DPAA_BUS=n
+CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
+CONFIG_RTE_LIBRTE_DPAA_PMD=n
+CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
+
+#
+# Compile NXP DPAA2 FSL-MC Bus
+#
+CONFIG_RTE_LIBRTE_FSLMC_BUS=n
+
+#
+# Compile Support Libraries for NXP DPAA2
+#
+CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
+CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
+
+#
+# Compile burst-oriented NXP DPAA2 PMD driver
+#
+CONFIG_RTE_LIBRTE_DPAA2_PMD=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
+
+#
+# Compile NXP ENETC PMD Driver
+#
+CONFIG_RTE_LIBRTE_ENETC_PMD=n
+
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
+#
+# Compile burst-oriented Cisco ENIC PMD driver
+#
+CONFIG_RTE_LIBRTE_ENIC_PMD=y
+
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# interval up to 8160 us, aligned to 2 (or default value)
-CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
#
# Compile burst-oriented FM10K PMD
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
+# Compile burst-oriented ICE PMD driver
+#
+CONFIG_RTE_LIBRTE_ICE_PMD=y
+CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
+CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
+
# Compile burst-oriented AVF PMD driver
#
CONFIG_RTE_LIBRTE_AVF_PMD=y
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
#
-# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
+# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
+# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
-#
-# Compile burst-oriented Broadcom PMD driver
-#
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
-
-#
-# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
-#
-CONFIG_RTE_LIBRTE_CXGBE_PMD=y
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
-
-#
-# Compile burst-oriented Cisco ENIC PMD driver
-#
-CONFIG_RTE_LIBRTE_ENIC_PMD=y
+# Linking method for mlx4/5 dependency on ibverbs and related libraries
+# Default linking is dynamic by linker.
+# Other option is dynamic by dlopen at run-time.
+CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
#
# Compile burst-oriented Netronome NFP PMD driver
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
+# QLogic 10G/25G/40G/50G/100G PMD
#
-# Compile Marvell PMD driver
-#
-CONFIG_RTE_LIBRTE_MRVL_PMD=n
-
-#
-# Compile virtual device driver for NetVSC on Hyper-V/Azure
-#
-CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
-
-#
-# Compile burst-oriented Broadcom BNXT PMD driver
-#
-CONFIG_RTE_LIBRTE_BNXT_PMD=y
+CONFIG_RTE_LIBRTE_QEDE_PMD=y
+CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
+#Provides abs path/name of the firmware file.
+#Empty string denotes driver will use default firmware
+CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
-#
-# Compile SOFTNIC PMD
-#
-CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y
-
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-#
-# Defines firmware type address space.
-# See documentation for supported values.
-# Other values raise compile time error.
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
-# NXP DPAA Bus
-CONFIG_RTE_LIBRTE_DPAA_BUS=n
-CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
-CONFIG_RTE_LIBRTE_DPAA_PMD=n
-
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
-# Compile NXP DPAA2 FSL-MC Bus
-#
-CONFIG_RTE_LIBRTE_FSLMC_BUS=n
-
-#
-# Compile Support Libraries for NXP DPAA2
-#
-CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
-CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
-
-#
-# Compile burst-oriented NXP DPAA2 PMD driver
+# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
-CONFIG_RTE_LIBRTE_DPAA2_PMD=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_AVP_PMD=n
+CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
-# Compile example software rings based PMD
-#
-CONFIG_RTE_LIBRTE_PMD_RING=y
-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
-
-#
-# Compile software PMD backed by PCAP files
+# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
-CONFIG_RTE_LIBRTE_PMD_PCAP=n
+CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile link bonding PMD library
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
-# QLogic 10G/25G/40G/50G/100G PMD
#
-CONFIG_RTE_LIBRTE_QEDE_PMD=y
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
-#Provides abs path/name of the firmware file.
-#Empty string denotes driver will use default firmware
-CONFIG_RTE_LIBRTE_QEDE_FW=""
+# Compile fail-safe PMD
+#
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
-# Compile software PMD backed by AF_PACKET sockets (Linux only)
+# Compile Marvell PMD driver
#
-CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
+CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
-# Compile ARK PMD
+# Compile Marvell MVNETA PMD driver
#
-CONFIG_RTE_LIBRTE_ARK_PMD=y
-CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
-CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
+CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
-# Compile WRS accelerated virtual port (AVP) guest PMD driver
+# Compile support for VMBus library
#
-CONFIG_RTE_LIBRTE_AVP_PMD=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
+CONFIG_RTE_LIBRTE_VMBUS=n
#
-# Compile the TAP PMD
-# It is enabled by default for Linux only.
+# Compile native PMD for Hyper-V/Azure
#
-CONFIG_RTE_LIBRTE_PMD_TAP=n
+CONFIG_RTE_LIBRTE_NETVSC_PMD=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
+
+#
+# Compile virtual device driver for NetVSC on Hyper-V/Azure
+#
+CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
-# Compile fail-safe PMD
+# Compile software PMD backed by PCAP files
#
-CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
+CONFIG_RTE_LIBRTE_PMD_PCAP=n
+
+#
+# Compile example software rings based PMD
+#
+CONFIG_RTE_LIBRTE_PMD_RING=y
+CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
+CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
+
+#
+# Compile SOFTNIC PMD
+#
+CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
+
+#
+# Compile the TAP PMD
+# It is enabled by default for Linux only.
+#
+CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_BBDEV_MAX_DEVS=128
+CONFIG_RTE_BBDEV_OFFLOAD_COST=y
#
# Compile PMD for NULL bbdev device
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
-CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
+#
+# Compile NXP CAAM JR crypto Driver
+#
+CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
+CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
+
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
-# Compile PMD for QuickAssist based devices
+# Compile PMD for Cavium OCTEON TX crypto device
+#
+CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
+
#
-CONFIG_RTE_LIBRTE_PMD_QAT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
+# Compile PMD for QuickAssist based devices - see docs for details
#
-# Number of sessions to create in the session memory pool
-# on a single QuickAssist device.
+CONFIG_RTE_LIBRTE_PMD_QAT=y
+CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
#
-CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
+# Max. number of QuickAssist devices, which can be detected and attached
+#
+CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
+CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
+CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
+
+#
+# Compile PMD for virtio crypto devices
+#
+CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
+#
+# Number of maximum virtio crypto devices
+#
+CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
-CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
-CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
#
# Compile PMD for SNOW 3G device
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
-CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
-CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
-#
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
-CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
+#
+# Compile PMD for AMD CCP crypto device
+#
+CONFIG_RTE_LIBRTE_PMD_CCP=n
+
#
# Compile PMD for Marvell Crypto device
#
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
+#
+# Compile generic compression device library
+#
+CONFIG_RTE_LIBRTE_COMPRESSDEV=y
+CONFIG_RTE_COMPRESS_MAX_DEVS=64
+
+#
+# Compile compressdev unit test
+#
+CONFIG_RTE_COMPRESSDEV_TEST=n
+
+#
+# Compile PMD for Octeontx ZIPVF compression device
+#
+CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
+
+#
+# Compile PMD for ISA-L compression device
+#
+CONFIG_RTE_LIBRTE_PMD_ISAL=n
+
+#
+# Compile PMD for ZLIB compression device
+#
+CONFIG_RTE_LIBRTE_PMD_ZLIB=n
+
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
+CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
+CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
+CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
+CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
-CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n
+
+#
+# Compile PMD for distributed software event device
+#
+CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
+#
+# Compile raw device support
+# EXPERIMENTAL: API may change without prior notice
+#
+CONFIG_RTE_LIBRTE_RAWDEV=y
+CONFIG_RTE_RAWDEV_MAX_DEVS=10
+CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
+
+#
+# Compile PMD for NXP DPAA2 CMDIF raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
+
+#
+# Compile PMD for NXP DPAA2 QDMA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
+
+#
+# Compile PMD for Intel FPGA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
+
#
# Compile librte_ring
#
#
# Compile Mempool drivers
#
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
+#
+# Compile librte_telemetry
+#
+CONFIG_RTE_LIBRTE_TELEMETRY=n
+
#
# Compile librte_lpm
#
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
+#
+# Compile IFC driver
+# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
+# should be enabled.
+#
+CONFIG_RTE_LIBRTE_IFC_PMD=n
+
+#
+# Compile librte_bpf
+#
+CONFIG_RTE_LIBRTE_BPF=y
+# allow load BPF from ELF files (requires libelf)
+CONFIG_RTE_LIBRTE_BPF_ELF=n
+
+#
+# Compile librte_ipsec
+#
+CONFIG_RTE_LIBRTE_IPSEC=y
+
#
# Compile the test application
#
#
CONFIG_RTE_TEST_BBDEV=y
+#
+# Compile the compression performance application
+#
+CONFIG_RTE_APP_COMPRESS_PERF=y
+
#
# Compile the crypto performance application
#
git.droids-corp.org / dpdk.git / blobdiff