config: gather options for dlopen mlx dependency

[dpdk.git] / config / common_base

diff --git a/config/common_base b/config/common_base
index 5ee13e8..d2c214f 100644 (file)
--- a/config/common_base
+++ b/config/common_base
@@ -55,12 +55,18 @@ CONFIG_RTE_MAJOR_ABI=
 #
 CONFIG_RTE_CACHE_LINE_SIZE=64
 
+#
+# Memory model
+#
+CONFIG_RTE_USE_C11_MEM_MODEL=n
+
 #
 # Compile Environment Abstraction Layer
 #
 CONFIG_RTE_LIBRTE_EAL=y
 CONFIG_RTE_MAX_LCORE=128
 CONFIG_RTE_MAX_NUMA_NODES=8
+CONFIG_RTE_MAX_HEAPS=32
 CONFIG_RTE_MAX_MEMSEG_LISTS=64
 # each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
 # or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
@@ -128,7 +134,7 @@ CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
 CONFIG_RTE_LIBRTE_IEEE1588=n
 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
-CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS=n
+CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
 
 #
 # Turn off Tx preparation stage
@@ -138,6 +144,11 @@ CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS=n
 #
 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
 
+#
+# Common libraries, before Bus/PMDs
+#
+CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
+
 #
 # Compile the Intel FPGA bus
 #
@@ -163,6 +174,11 @@ CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
 CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
 
+#
+# Compile Aquantia Atlantic PMD driver
+#
+CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
+
 #
 # Compile AMD PMD
 #
@@ -217,6 +233,11 @@ CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
 CONFIG_RTE_LIBRTE_DPAA2_PMD=n
 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
 
+#
+# Compile NXP ENETC PMD Driver
+#
+CONFIG_RTE_LIBRTE_ENETC_PMD=n
+
 #
 # Compile burst-oriented Amazon ENA PMD driver
 #
@@ -276,6 +297,15 @@ CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
 CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
 
 #
+# Compile burst-oriented ICE PMD driver
+#
+CONFIG_RTE_LIBRTE_ICE_PMD=y
+CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
+CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
+
 # Compile burst-oriented AVF PMD driver
 #
 CONFIG_RTE_LIBRTE_AVF_PMD=y
@@ -290,15 +320,18 @@ CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
 #
 CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
 
 #
-# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
-# (MLX5) PMD
+# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
+# ConnectX-6 & Bluefield (MLX5) PMD
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
+
+# Linking method for mlx4/5 dependency on ibverbs and related libraries
+# Default linking is dynamic by linker.
+# Other option is dynamic by dlopen at run-time.
+CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
 
 #
 # Compile burst-oriented Netronome NFP PMD driver
@@ -399,6 +432,24 @@ CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
 #
 CONFIG_RTE_LIBRTE_MVPP2_PMD=n
 
+#
+# Compile Marvell MVNETA PMD driver
+#
+CONFIG_RTE_LIBRTE_MVNETA_PMD=n
+
+#
+# Compile support for VMBus library
+#
+CONFIG_RTE_LIBRTE_VMBUS=n
+
+#
+# Compile native PMD for Hyper-V/Azure
+#
+CONFIG_RTE_LIBRTE_NETVSC_PMD=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
+
 #
 # Compile virtual device driver for NetVSC on Hyper-V/Azure
 #
@@ -424,7 +475,7 @@ CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
 #
 # Compile SOFTNIC PMD
 #
-CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y
+CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
 
 #
 # Compile the TAP PMD
@@ -442,7 +493,7 @@ CONFIG_RTE_PMD_PACKET_PREFETCH=y
 #
 CONFIG_RTE_LIBRTE_BBDEV=y
 CONFIG_RTE_BBDEV_MAX_DEVS=128
-CONFIG_RTE_BBDEV_OFFLOAD_COST=n
+CONFIG_RTE_BBDEV_OFFLOAD_COST=y
 
 #
 # Compile PMD for NULL bbdev device
@@ -466,27 +517,39 @@ CONFIG_RTE_CRYPTO_MAX_DEVS=64
 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
 
+#
+# Compile NXP CAAM JR crypto Driver
+#
+CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
+CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
+
 #
 # Compile NXP DPAA2 crypto sec driver for CAAM HW
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
-CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048
 
 #
 # NXP DPAA caam - crypto driver
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
 CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
-CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS=2048
 
 #
-# Compile PMD for QuickAssist based devices
+# Compile PMD for Cavium OCTEON TX crypto device
+#
+CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
+
+#
+# Compile PMD for QuickAssist based devices - see docs for details
 #
-CONFIG_RTE_LIBRTE_PMD_QAT=n
+CONFIG_RTE_LIBRTE_PMD_QAT=y
+CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
 #
 # Max. number of QuickAssist devices, which can be detected and attached
 #
 CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
+CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
+CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
 
 #
 # Compile PMD for virtio crypto devices
@@ -496,11 +559,6 @@ CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
 # Number of maximum virtio crypto devices
 #
 CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
-#
-# Number of sessions to create in the session memory pool
-# on a single virtio crypto device.
-#
-CONFIG_RTE_VIRTIO_CRYPTO_PMD_MAX_NB_SESSIONS=1024
 
 #
 # Compile PMD for AESNI backed device
@@ -516,7 +574,6 @@ CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
 # Compile PMD for AESNI GCM device
 #
 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
-CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
 
 #
 # Compile PMD for SNOW 3G device
@@ -528,15 +585,12 @@ CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
 # Compile PMD for KASUMI device
 #
 CONFIG_RTE_LIBRTE_PMD_KASUMI=n
-CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n
 
 #
 # Compile PMD for ZUC device
 #
 CONFIG_RTE_LIBRTE_PMD_ZUC=n
-CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
 
-#
 # Compile PMD for Crypto Scheduler device
 #
 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
@@ -555,7 +609,6 @@ CONFIG_RTE_LIBRTE_PMD_CCP=n
 # Compile PMD for Marvell Crypto device
 #
 CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO_DEBUG=n
 
 #
 # Compile generic security library
@@ -573,11 +626,21 @@ CONFIG_RTE_COMPRESS_MAX_DEVS=64
 #
 CONFIG_RTE_COMPRESSDEV_TEST=n
 
+#
+# Compile PMD for Octeontx ZIPVF compression device
+#
+CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
+
 #
 # Compile PMD for ISA-L compression device
 #
 CONFIG_RTE_LIBRTE_PMD_ISAL=n
 
+#
+# Compile PMD for ZLIB compression device
+#
+CONFIG_RTE_LIBRTE_PMD_ZLIB=n
+
 #
 # Compile generic event device library
 #
@@ -586,7 +649,9 @@ CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
 CONFIG_RTE_EVENT_MAX_DEVS=16
 CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
 CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
+CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
 CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
+CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
 
 #
 # Compile PMD for skeleton event device
@@ -599,6 +664,11 @@ CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
 
+#
+# Compile PMD for distributed software event device
+#
+CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
+
 #
 # Compile PMD for octeontx sso event device
 #
@@ -646,7 +716,6 @@ CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
 # Compile librte_ring
 #
 CONFIG_RTE_LIBRTE_RING=y
-CONFIG_RTE_RING_USE_C11_MEM_MODEL=n
 
 #
 # Compile librte_mempool
@@ -730,6 +799,11 @@ CONFIG_RTE_LIBRTE_BITRATE=y
 #
 CONFIG_RTE_LIBRTE_LATENCY_STATS=y
 
+#
+# Compile librte_telemetry
+#
+CONFIG_RTE_LIBRTE_TELEMETRY=n
+
 #
 # Compile librte_lpm
 #
@@ -863,6 +937,11 @@ CONFIG_RTE_LIBRTE_BPF=y
 # allow load BPF from ELF files (requires libelf)
 CONFIG_RTE_LIBRTE_BPF_ELF=n
 
+#
+# Compile librte_ipsec
+#
+CONFIG_RTE_LIBRTE_IPSEC=y
+
 #
 # Compile the test application
 #
@@ -886,6 +965,11 @@ CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
 #
 CONFIG_RTE_TEST_BBDEV=y
 
+#
+# Compile the compression performance application
+#
+CONFIG_RTE_APP_COMPRESS_PERF=y
+
 #
 # Compile the crypto performance application
 #