-.. BSD LICENSE
- Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2010-2014 Intel Corporation.
.. _install_from_ports:
collection are documented in the
`FreeBSD Handbook <http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html>`_.
-.. note::
-
- Testing has been performed using FreeBSD 10.0-RELEASE (x86_64) and requires the
- installation of the kernel sources, which should be included during the
- installation of FreeBSD.
-
Installing the DPDK FreeBSD Port
--------------------------------
hw.nic_uio.bdfs="2:0:0,2:0:1"
nic_uio_load="YES"
+.. note::
+
+ Please ensure that the latest patches are applied to third party libraries
+ and software to avoid any known vulnerabilities.
+
+
Compiling and Running the Example Applications
----------------------------------------------
* ``RTE_SDK=/usr/local/share/dpdk``
-* ``RTE_TARGET=x86_64-native-bsdapp-clang``
+* ``RTE_TARGET=x86_64-native-freebsd-clang``
.. note::
To install a copy of the DPDK compiled using gcc, please download the
- official DPDK package from http://dpdk.org/ and install manually using
+ official DPDK package from http://core.dpdk.org/download/ and install manually using
the instructions given in the next chapter, :ref:`building_from_source`
An example application can therefore be copied to a user's home directory and
export RTE_SDK=/usr/local/share/dpdk
- export RTE_TARGET=x86_64-native-bsdapp-clang
+ export RTE_TARGET=x86_64-native-freebsd-clang
cp -r /usr/local/share/dpdk/examples/helloworld .
INSTALL-APP helloworld
INSTALL-MAP helloworld.map
- sudo ./build/helloworld -l 0-3 -n 2
-
- EAL: Contigmem driver has 2 buffers, each of size 1GB
+ sudo ./build//helloworld -l 0-3
EAL: Sysctl reports 8 cpus
- EAL: Detected lcore 0
- EAL: Detected lcore 1
- EAL: Detected lcore 2
- EAL: Detected lcore 3
- EAL: Support maximum 64 logical core(s) by configuration.
- EAL: Detected 4 lcore(s)
- EAL: Setting up physically contiguous memory...
- EAL: Mapped memory segment 1 @ 0x802400000: len 1073741824
- EAL: Mapped memory segment 2 @ 0x842400000: len 1073741824
- EAL: WARNING: clock_gettime cannot use CLOCK_MONOTONIC_RAW and HPET
- is not available - clock timings may be less accurate.
- EAL: TSC frequency is ~3569023 KHz
- EAL: PCI scan found 24 devices
- EAL: Master core 0 is ready (tid=0x802006400)
- EAL: Core 1 is ready (tid=0x802006800)
- EAL: Core 3 is ready (tid=0x802007000)
- EAL: Core 2 is ready (tid=0x802006c00)
+ EAL: Detected 8 lcore(s)
+ EAL: Detected 1 NUMA nodes
+ EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
+ EAL: Selected IOVA mode 'PA'
+ EAL: Contigmem driver has 2 buffers, each of size 1GB
+ EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x180000000, len 1073741824
+ EAL: Mapped memory segment 1 @ 0x1080000000: physaddr:0x1c0000000, len 1073741824
+ EAL: PCI device 0000:00:19.0 on NUMA socket 0
+ EAL: probe driver: 8086:153b net_e1000_em
+ EAL: 0000:00:19.0 not managed by UIO driver, skipping
EAL: PCI device 0000:01:00.0 on NUMA socket 0
- EAL: probe driver: 8086:10fb rte_ixgbe_pmd
- EAL: PCI memory mapped at 0x80074a000
- EAL: PCI memory mapped at 0x8007ca000
+ EAL: probe driver: 8086:1572 net_i40e
+ EAL: 0000:01:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:01:00.1 on NUMA socket 0
- EAL: probe driver: 8086:10fb rte_ixgbe_pmd
- EAL: PCI memory mapped at 0x8007ce000
- EAL: PCI memory mapped at 0x80084e000
- EAL: PCI device 0000:02:00.0 on NUMA socket 0
- EAL: probe driver: 8086:10fb rte_ixgbe_pmd
- EAL: PCI memory mapped at 0x800852000
- EAL: PCI memory mapped at 0x8008d2000
- EAL: PCI device 0000:02:00.1 on NUMA socket 0
- EAL: probe driver: 8086:10fb rte_ixgbe_pmd
- EAL: PCI memory mapped at 0x801b3f000
- EAL: PCI memory mapped at 0x8008d6000
+ EAL: probe driver: 8086:1572 net_i40e
+ EAL: 0000:01:00.1 not managed by UIO driver, skipping
+ EAL: PCI device 0000:01:00.2 on NUMA socket 0
+ EAL: probe driver: 8086:1572 net_i40e
+ EAL: 0000:01:00.2 not managed by UIO driver, skipping
+ EAL: PCI device 0000:01:00.3 on NUMA socket 0
+ EAL: probe driver: 8086:1572 net_i40e
+ EAL: 0000:01:00.3 not managed by UIO driver, skipping
hello from core 1
hello from core 2
hello from core 3
hello from core 0
+
.. note::
To run a DPDK process as a non-root user, adjust the permissions on
git.droids-corp.org / dpdk.git / blobdiff