Compiling librte_pmd_mlx4 causes DPDK to be linked against libibverbs.
-Features
---------
-
-- Multi arch support: x86_64 and POWER8.
-- Link state information is provided.
-- RX interrupts.
-
Configuration
-------------
allocations and initialization. The following dependencies are not part of
DPDK and must be installed separately:
-- **libibverbs**
+- **libibverbs** (provided by rdma-core package)
User space verbs framework used by librte_pmd_mlx4. This library provides
a generic interface between the kernel and low-level user space drivers
resources allocations) to be managed by the kernel and fast operations to
never leave user space.
-- **libmlx4**
+- **libmlx4** (provided by rdma-core package)
Low-level user space driver library for Mellanox ConnectX-3 devices,
it is automatically loaded by libibverbs.
This library basically implements send/receive calls to the hardware
queues.
-- **Kernel modules** (mlnx-ofed-kernel)
+- **Kernel modules**
They provide the kernel-side verbs API and low level device drivers that
manage actual hardware initialization and resources sharing with user
Both libraries are BSD and GPL licensed. Linux kernel modules are GPL
licensed.
-Currently supported by DPDK:
+Depending on system constraints and user preferences either RDMA core library
+with a recent enough Linux kernel release (recommended) or Mellanox OFED,
+which provides compatibility with older releases.
+
+Current RDMA core package and Linux kernel (recommended)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- Minimal Linux kernel version: 4.14.
+- Minimal RDMA core version: v15 (see `RDMA core installation documentation`_).
-- Mellanox OFED **4.1**.
-- Firmware version **2.36.5000** and above.
+.. _`RDMA core installation documentation`: https://raw.githubusercontent.com/linux-rdma/rdma-core/master/README.md
-Getting Mellanox OFED
-~~~~~~~~~~~~~~~~~~~~~
+.. _Mellanox_OFED_as_a_fallback:
-While these libraries and kernel modules are available on OpenFabrics
-Alliance's `website <https://www.openfabrics.org/>`_ and provided by package
-managers on most distributions, this PMD requires Ethernet extensions that
-may not be supported at the moment (this is a work in progress).
+Mellanox OFED as a fallback
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
-`Mellanox OFED
-<http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers>`_
-includes the necessary support and should be used in the meantime. For DPDK,
-only libibverbs, libmlx4, mlnx-ofed-kernel packages and firmware updates are
-required from that distribution.
+- `Mellanox OFED`_ version: **4.2**.
+- firmware version: **2.42.5000** and above.
+
+.. _`Mellanox OFED`: http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
.. note::
this DPDK release was developed and tested against is strongly
recommended. Please check the `prerequisites`_.
-Supported NICs
---------------
+Installing Mellanox OFED
+^^^^^^^^^^^^^^^^^^^^^^^^
-* Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2*40G)
-
-Quick Start Guide
------------------
-
-1. Download latest Mellanox OFED. For more info check the `prerequisites`_.
+1. Download latest Mellanox OFED.
2. Install the required libraries and kernel modules either by installing
only the required set, or by installing the entire Mellanox OFED:
.. code-block:: console
- ./mlnxofedinstall
+ ./mlnxofedinstall --dpdk --upstream-libs
For SR-IOV hypervisors use:
.. code-block:: console
- ./mlnxofedinstall --enable-sriov -hypervisor
+ ./mlnxofedinstall --dpdk --upstream-libs --enable-sriov --hypervisor
For SR-IOV virtual machine use:
.. code-block:: console
- ./mlnxofedinstall --guest
+ ./mlnxofedinstall --dpdk --upstream-libs --guest
3. Verify the firmware is the correct one:
connectx_port_config
- Or in the manual way:
+5. Continue with :ref:`section 2 of the Quick Start Guide <QSG_2>`.
+
+Supported NICs
+--------------
+
+* Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2*40G)
+
+.. _qsg:
+
+Quick Start Guide
+-----------------
+
+1. Set all ports links to Ethernet
.. code-block:: console
echo eth > "/sys/bus/pci/devices/$PCI/mlx4_port0"
echo eth > "/sys/bus/pci/devices/$PCI/mlx4_port1"
-5. In case of bare metal or hypervisor, configure optimized steering mode
+ .. note::
+
+ If using Mellanox OFED one can permanently set the port link
+ to Ethernet using connectx_port_config tool provided by it.
+ :ref:`Mellanox_OFED_as_a_fallback`:
+
+.. _QSG_2:
+
+2. In case of bare metal or hypervisor, configure optimized steering mode
by adding the following line to ``/etc/modprobe.d/mlx4_core.conf``:
.. code-block:: console
If VLAN filtering is used, set log_num_mgm_entry_size=-1.
Performance degradation can occur on this case.
-6. Restart the driver:
+3. Restart the driver:
.. code-block:: console
service openibd restart
-7. Compile DPDK and you are ready to go. See instructions on
+4. Compile DPDK and you are ready to go. See instructions on
:ref:`Development Kit Build System <Development_Kit_Build_System>`
Performance tuning
git.droids-corp.org / dpdk.git / blobdiff