* It supports multicast packets and promiscuous mode.
-* The descriptor number for the RX/TX queue is hard-coded to be 256 by qemu.
+* The descriptor number for the Rx/Tx queue is hard-coded to be 256 by qemu.
If given a different descriptor number by the upper application,
the virtio PMD generates a warning and fall back to the hard-coded value.
For each physical port, kni also creates a kernel thread that retrieves packets from the kni receive queue,
place them onto kni's raw socket's queue and wake up the vhost kernel thread to exchange packets with the virtio virt queue.
- For more details about kni, please refer to Chapter 24 "Kernel NIC Interface".
+ For more details about kni, please refer to :ref:`kni`.
#. Enable the kni raw socket functionality for the specified physical NIC port,
get the generated file descriptor and set it in the qemu command line parameter.
which means received packets come from vEth0, and transmitted packets is sent to vEth0.
#. In the guest, bind the virtio device to the uio_pci_generic kernel module and start the forwarding application.
- When the virtio port in guest bursts rx, it is getting packets from the raw socket's receive queue.
- When the virtio port bursts tx, it is sending packet to the tx_q.
+ When the virtio port in guest bursts Rx, it is getting packets from the
+ raw socket's receive queue.
+ When the virtio port bursts Tx, it is sending packet to the tx_q.
.. code-block:: console
modprobe uio
echo 512 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
modprobe uio_pci_generic
- python tools/dpdk_nic_bind.py -b uio_pci_generic 00:03.0
+ python tools/dpdk-devbind.py -b uio_pci_generic 00:03.0
We use testpmd as the forwarding application in this example.
The packet reception and transmission flow path is:
- IXIA packet generator->82599 PF->KNI rx queue->KNI raw socket queue->Guest VM virtio port 0 rx burst->Guest VM virtio port 0 tx burst-> KNI tx queue->82599 PF-> IXIA packet generator
+ IXIA packet generator->82599 PF->KNI Rx queue->KNI raw socket queue->Guest
+ VM virtio port 0 Rx burst->Guest VM virtio port 0 Tx burst-> KNI Tx queue
+ ->82599 PF-> IXIA packet generator
Virtio with qemu virtio Back End
--------------------------------
In this example, the packet reception flow path is:
- IXIA packet generator->82599 PF->Linux Bridge->TAP0's socket queue-> Guest VM virtio port 0 rx burst-> Guest VM 82599 VF port1 tx burst-> IXIA packet generator
+ IXIA packet generator->82599 PF->Linux Bridge->TAP0's socket queue-> Guest
+ VM virtio port 0 Rx burst-> Guest VM 82599 VF port1 Tx burst-> IXIA packet
+ generator
The packet transmission flow is:
- IXIA packet generator-> Guest VM 82599 VF port1 rx burst-> Guest VM virtio port 0 tx burst-> tap -> Linux Bridge->82599 PF-> IXIA packet generator
+ IXIA packet generator-> Guest VM 82599 VF port1 Rx burst-> Guest VM virtio
+ port 0 Tx burst-> tap -> Linux Bridge->82599 PF-> IXIA packet generator
+
+
+Virtio PMD Rx/Tx Callbacks
+--------------------------
+
+Virtio driver has 3 Rx callbacks and 2 Tx callbacks.
+
+Rx callbacks:
+
+#. ``virtio_recv_pkts``:
+ Regular version without mergeable Rx buffer support.
+
+#. ``virtio_recv_mergeable_pkts``:
+ Regular version with mergeable Rx buffer support.
+
+#. ``virtio_recv_pkts_vec``:
+ Vector version without mergeable Rx buffer support, also fixes the available
+ ring indexes and uses vector instructions to optimize performance.
+
+Tx callbacks:
+
+#. ``virtio_xmit_pkts``:
+ Regular version.
+
+#. ``virtio_xmit_pkts_simple``:
+ Vector version fixes the available ring indexes to optimize performance.
+
+
+By default, the non-vector callbacks are used:
+
+* For Rx: If mergeable Rx buffers is disabled then ``virtio_recv_pkts`` is
+ used; otherwise ``virtio_recv_mergeable_pkts``.
+
+* For Tx: ``virtio_xmit_pkts``.
+
+
+Vector callbacks will be used when:
+
+* ``txq_flags`` is set to ``VIRTIO_SIMPLE_FLAGS`` (0xF01), which implies:
+
+ * Single segment is specified.
+
+ * No offload support is needed.
+
+* Mergeable Rx buffers is disabled.
+
+The corresponding callbacks are:
+
+* For Rx: ``virtio_recv_pkts_vec``.
+
+* For Tx: ``virtio_xmit_pkts_simple``.
+
+
+Example of using the vector version of the virtio poll mode driver in
+``testpmd``::
+
+ testpmd -c 0x7 -n 4 -- -i --txqflags=0xF01 --rxq=1 --txq=1 --nb-cores=1