| ``mask`` | ``id`` | zeroed to match any value |
+----------+----------+---------------------------+
+Item: ``TAG``
+^^^^^^^^^^^^^
+
+Matches tag item set by other flows. Multiple tags are supported by specifying
+``index``.
+
+- Default ``mask`` matches the specified tag value and index.
+
+.. _table_rte_flow_item_tag:
+
+.. table:: TAG
+
+ +----------+----------+----------------------------------------+
+ | Field | Subfield | Value |
+ +==========+===========+=======================================+
+ | ``spec`` | ``data`` | 32 bit flow tag value |
+ | +-----------+---------------------------------------+
+ | | ``index`` | index of flow tag |
+ +----------+-----------+---------------------------------------+
+ | ``last`` | ``data`` | upper range value |
+ | +-----------+---------------------------------------+
+ | | ``index`` | field is ignored |
+ +----------+-----------+---------------------------------------+
+ | ``mask`` | ``data`` | bit-mask applies to "spec" and "last" |
+ | +-----------+---------------------------------------+
+ | | ``index`` | field is ignored |
+ +----------+-----------+---------------------------------------+
+
+Item: ``META``
+^^^^^^^^^^^^^^^^^
+
+Matches 32 bit metadata item set.
+
+On egress, metadata can be set either by mbuf metadata field with
+PKT_TX_DYNF_METADATA flag or ``SET_META`` action. On ingress, ``SET_META``
+action sets metadata for a packet and the metadata will be reported via
+``metadata`` dynamic field of ``rte_mbuf`` with PKT_RX_DYNF_METADATA flag.
+
+- Default ``mask`` matches the specified Rx metadata value.
+
+.. _table_rte_flow_item_meta:
+
+.. table:: META
+
+ +----------+----------+---------------------------------------+
+ | Field | Subfield | Value |
+ +==========+==========+=======================================+
+ | ``spec`` | ``data`` | 32 bit metadata value |
+ +----------+----------+---------------------------------------+
+ | ``last`` | ``data`` | upper range value |
+ +----------+----------+---------------------------------------+
+ | ``mask`` | ``data`` | bit-mask applies to "spec" and "last" |
+ +----------+----------+---------------------------------------+
+
Data matching item types
~~~~~~~~~~~~~~~~~~~~~~~~
- ``proto_id``: PPP protocol identifier.
- Default ``mask`` matches proto_id only.
-
-.. _table_rte_flow_item_meta:
-
-.. table:: META
-
- +----------+----------+---------------------------------------+
- | Field | Subfield | Value |
- +==========+==========+=======================================+
- | ``spec`` | ``data`` | 32 bit metadata value |
- +----------+--------------------------------------------------+
- | ``last`` | ``data`` | upper range value |
- +----------+----------+---------------------------------------+
- | ``mask`` | ``data`` | bit-mask applies to "spec" and "last" |
- +----------+----------+---------------------------------------+
-
Item: ``NSH``
^^^^^^^^^^^^^
- Default ``mask`` matches group_addr.
+Item: ``AH``
+^^^^^^^^^^^^
+
+Matches a IP Authentication Header (RFC 4302).
+
+- ``next_hdr``: next payload after AH.
+- ``payload_len``: total length of AH in 4B words.
+- ``reserved``: reserved bits.
+- ``spi``: security parameters index.
+- ``seq_num``: counter value increased by 1 on each packet sent.
+- Default ``mask`` matches spi.
+
+Item: ``HIGIG2``
+^^^^^^^^^^^^^^^^^
+
+Matches a HIGIG2 header field. It is layer 2.5 protocol and used in
+Broadcom switches.
+
+- Default ``mask`` matches classification and vlan.
+
+
Actions
~~~~~~~
Using this action on non-matching traffic will result in undefined behavior.
+Action: ``SET_TAG``
+^^^^^^^^^^^^^^^^^^^
+
+Set Tag.
+
+Tag is a transient data used during flow matching. This is not delivered to
+application. Multiple tags are supported by specifying index.
+
+.. _table_rte_flow_action_set_tag:
+
+.. table:: SET_TAG
+
+ +-----------+----------------------------+
+ | Field | Value |
+ +===========+============================+
+ | ``data`` | 32 bit tag value |
+ +-----------+----------------------------+
+ | ``mask`` | bit-mask applies to "data" |
+ +-----------+----------------------------+
+ | ``index`` | index of tag to set |
+ +-----------+----------------------------+
+
+Action: ``SET_META``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Set metadata. Item ``META`` matches metadata.
+
+Metadata set by mbuf metadata field with PKT_TX_DYNF_METADATA flag on egress
+will be overridden by this action. On ingress, the metadata will be carried by
+``metadata`` dynamic field of ``rte_mbuf`` which can be accessed by
+``RTE_FLOW_DYNF_METADATA()``. PKT_RX_DYNF_METADATA flag will be set along
+with the data.
+
+The mbuf dynamic field must be registered by calling
+``rte_flow_dynf_metadata_register()`` prior to use ``SET_META`` action.
+
+Altering partial bits is supported with ``mask``. For bits which have never been
+set, unpredictable value will be seen depending on driver implementation. For
+loopback/hairpin packet, metadata set on Rx/Tx may or may not be propagated to
+the other path depending on HW capability.
+
+.. _table_rte_flow_action_set_meta:
+
+.. table:: SET_META
+
+ +----------+----------------------------+
+ | Field | Value |
+ +==========+============================+
+ | ``data`` | 32 bit metadata value |
+ +----------+----------------------------+
+ | ``mask`` | bit-mask applies to "data" |
+ +----------+----------------------------+
+
Negative types
~~~~~~~~~~~~~~