+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2018 The DPDK contributors
+
ABI and API Deprecation
=======================
Deprecation Notices
-------------------
-* eal: both declaring and identifying devices will be streamlined in v18.05.
+* meson: The minimum supported version of meson for configuring and building
+ DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
+ those users with a version earlier than 0.47.1, an updated copy of meson
+ can be got using the ``pip``, or ``pip3``, tool for downloading python
+ packages.
+
+* kvargs: The function ``rte_kvargs_process`` will get a new parameter
+ for returning key match count. It will ease handling of no-match case.
+
+* eal: The function ``rte_eal_remote_launch`` will return new error codes
+ after read or write error on the pipe, instead of calling ``rte_panic``.
+
+* eal: the ``rte_mem_config`` struct will be made private to remove it from the
+ externally visible ABI and allow it to be updated in the future.
+
+* eal: both declaring and identifying devices will be streamlined in v18.11.
New functions will appear to query a specific port from buses, classes of
device and device drivers. Device declaration will be made coherent with the
new scheme of device identification.
As such, ``rte_devargs`` device representation will change.
- - removal of ``name`` and ``args`` fields.
- The enum ``rte_devtype`` was used to identify a bus and will disappear.
- - The ``rte_devargs_list`` will be made private.
- Functions previously deprecated will change or disappear:
- + ``rte_eal_devargs_add``
+ ``rte_eal_devargs_type_count``
- + ``rte_eal_parse_devargs_str``, replaced by ``rte_eal_devargs_parse``
- + ``rte_eal_devargs_parse`` will change its format and use.
- + all ``rte_devargs`` related functions will be renamed, changing the
- ``rte_eal_devargs_`` prefix to ``rte_devargs_``.
+
+* vfio: removal of ``rte_vfio_dma_map`` and ``rte_vfio_dma_unmap`` APIs which
+ have been replaced with ``rte_dev_dma_map`` and ``rte_dev_dma_unmap``
+ functions. The due date for the removal targets DPDK 20.02.
* pci: Several exposed functions are misnamed.
The following functions are deprecated starting from v17.11 and are replaced:
- ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse``
- ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp``
-* eal: The semantics of the return value for the ``rte_lcore_has_role`` function
- are planned to change in v18.05. The function currently returns 0 and <0 for
- success and failure, respectively. This will change to 1 and 0 for true and
- false, respectively, to make use of the function more intuitive.
-
-* eal: new ``numa_node_count`` member will be added to ``rte_config`` structure
- in v18.05.
-
-* eal: due to internal data layout reorganization, there will be changes to
- several structures and functions as a result of coming changes to support
- memory hotplug in v18.05.
- ``rte_eal_get_physmem_layout`` will be deprecated and removed in subsequent
- releases.
- ``rte_mem_config`` contents will change due to switch to memseg lists.
- ``rte_memzone`` member ``memseg_id`` will no longer serve any useful purpose
- and will be removed.
-
-* eal: a new set of mbuf mempool ops name APIs for user, platform and best
- mempool names have been defined in ``rte_mbuf`` in v18.02. The uses of
- ``rte_eal_mbuf_default_mempool_ops`` shall be replaced by
- ``rte_mbuf_best_mempool_ops``.
- The following function is now redundant and it is target to be deprecated
- in 18.05:
-
- - ``rte_eal_mbuf_default_mempool_ops``
-
-* mempool: several API and ABI changes are planned in v18.05.
- The following functions, introduced for Xen, which is not supported
- anymore since v17.11, are hard to use, not used anywhere else in DPDK.
- Therefore they will be deprecated in v18.05 and removed in v18.08:
-
- - ``rte_mempool_xmem_create``
- - ``rte_mempool_xmem_size``
- - ``rte_mempool_xmem_usage``
-
- The following changes are planned:
-
- - removal of ``get_capabilities`` mempool ops and related flags.
- - substitute ``register_memory_area`` with ``populate`` ops.
- - addition of new ops to customize required memory chunk calculation,
- customize objects population and allocate contiguous
- block of objects if underlying driver supports it.
-
-* mbuf: The control mbuf API will be removed in v18.05. The impacted
- functions and macros are:
-
- - ``rte_ctrlmbuf_init()``
- - ``rte_ctrlmbuf_alloc()``
- - ``rte_ctrlmbuf_free()``
- - ``rte_ctrlmbuf_data()``
- - ``rte_ctrlmbuf_len()``
- - ``rte_is_ctrlmbuf()``
- - ``CTRL_MBUF_FLAG``
-
- The packet mbuf API should be used as a replacement.
-
-* mbuf: The opaque ``mbuf->hash.sched`` field will be updated to support generic
- definition in line with the ethdev TM and MTR APIs. Currently, this field
- is defined in librte_sched in a non-generic way. The new generic format
- will contain: queue ID, traffic class, color. Field size will not change.
-
-* ethdev: a new Tx and Rx offload API was introduced on 17.11.
- In the new API, offloads are divided into per-port and per-queue offloads.
- Offloads are disabled by default and enabled per application request.
- The old offloads API is target to be deprecated on 18.05. This includes:
-
- - removal of ``ETH_TXQ_FLAGS_NO*`` flags.
- - removal of ``txq_flags`` field from ``rte_eth_txconf`` struct.
- - removal of the offloads bit-field from ``rte_eth_rxmode`` struct.
+* dpaa2: removal of ``rte_dpaa2_memsegs`` structure which has been replaced
+ by a pa-va search library. This structure was earlier being used for holding
+ memory segments used by dpaa2 driver for faster pa->va translation. This
+ structure would be made internal (or removed if all dependencies are cleared)
+ in future releases.
* ethdev: the legacy filter API, including
``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
Target release for removal of the legacy API will be defined once most
PMDs have switched to rte_flow.
-* ethdev: A new rss level field planned in 18.05.
- The new API add rss_level field to ``rte_eth_rss_conf`` to enable a choice
- of RSS hash calculation on outer or inner header of tunneled packet.
-
-* ethdev: Currently, if the rte_eth_rx_burst() function returns a value less
- than *nb_pkts*, the application will assume that no more packets are present.
- Some of the hw queue based hardware can only support smaller burst for RX
- and TX and thus break the expectation of the rx_burst API. Similar is the
- case for TX burst as well as ring sizes. ``rte_eth_dev_info`` will be added
- with following new parameters so as to support semantics for drivers to
- define a preferred size for Rx/Tx burst and rings.
-
- - Member ``struct preferred_size`` would be added to enclose all preferred
- size to be fetched from driver/implementation.
- - Members ``uint16_t rx_burst``, ``uint16_t tx_burst``, ``uint16_t rx_ring``,
- and ``uint16_t tx_ring`` would be added to ``struct preferred_size``.
-
-* i40e: The default flexible payload configuration which extracts the first 16
- bytes of the payload for RSS will be deprecated starting from 18.02. If
- required the previous behavior can be configured using existing flow
- director APIs. There is no ABI/API break. This change will just remove a
- global configuration setting and require explicit configuration.
-
-* librte_meter: The API will change to accommodate configuration profiles.
- Most of the API functions will have an additional opaque parameter.
-
-* ring: The alignment constraints on the ring structure will be relaxed
- to one cache line instead of two, and an empty cache line padding will
- be added between the producer and consumer structures. The size of the
- structure and the offset of the fields will remain the same on
- platforms with 64B cache line, but will change on other platforms.
+* kni: remove KNI ethtool support. To clarify, this is not to remove the KNI,
+ but only to remove ethtool support of it that is disabled by default and
+ can be enabled via ``CONFIG_RTE_KNI_KMOD_ETHTOOL`` config option.
+ Existing KNI ethtool implementation is only supported by ``igb`` & ``ixgbe``
+ drivers, by using a copy of kernel drivers in DPDK. This model cannot be
+ extended to all drivers in DPDK and it is too much effort to maintain
+ kernel modules in DPDK. As a result users won't be able to use ``ethtool``
+ via ``igb`` & ``ixgbe`` anymore.
+
+* cryptodev: New member in ``rte_cryptodev_config`` to allow applications to
+ disable features supported by the crypto device. Only the following features
+ would be allowed to be disabled this way,
+
+ - ``RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO``
+ - ``RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO``
+ - ``RTE_CRYPTODEV_FF_SECURITY``
+
+ Disabling unused features would facilitate efficient usage of HW/SW offload.
+
+ - Member ``uint64_t ff_disable`` in ``rte_cryptodev_config``
+
+ The field would be added in v19.08.
+
+* cryptodev: the ``uint8_t *data`` member of ``key`` structure in the xforms
+ structure (``rte_crypto_cipher_xform``, ``rte_crypto_auth_xform``, and
+ ``rte_crypto_aead_xform``) will be changed to ``const uint8_t *data``.
+
+* cryptodev: support for using IV with all sizes is added, J0 still can
+ be used but only when IV length in following structs ``rte_crypto_auth_xform``,
+ ``rte_crypto_aead_xform`` is set to zero. When IV length is greater or equal
+ to one it means it represents IV, when is set to zero it means J0 is used
+ directly, in this case 16 bytes of J0 need to be passed.
+
+* sched: To allow more traffic classes, flexible mapping of pipe queues to
+ traffic classes, and subport level configuration of pipes and queues
+ changes will be made to macros, data structures and API functions defined
+ in "rte_sched.h". These changes are aligned to improvements suggested in the
+ RFC https://mails.dpdk.org/archives/dev/2018-November/120035.html.
+
+* metrics: The function ``rte_metrics_init`` will have a non-void return
+ in order to notify errors instead of calling ``rte_exit``.
+
+* power: ``rte_power_set_env`` function will no longer return 0 on attempt
+ to set new power environment if power environment was already initialized.
+ In this case the function will return -1 unless the environment is unset first
+ (using ``rte_power_unset_env``). Other function usage scenarios will not change.
git.droids-corp.org / dpdk.git / blobdiff