Deprecation Notices
-------------------
+* meson: The minimum supported version of meson for configuring and building
+ DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
+ those users with a version earlier than 0.47.1, an updated copy of meson
+ can be got using the ``pip``, or ``pip3``, tool for downloading python
+ packages.
+
* kvargs: The function ``rte_kvargs_process`` will get a new parameter
for returning key match count. It will ease handling of no-match case.
-* eal: function ``rte_bsf64`` in ``rte_bitmap.h`` has been renamed to
- ``rte_bsf64_safe`` and moved to ``rte_common.h``. A new ``rte_bsf64`` function
- will be added in the next release in ``rte_common.h`` that follows convention
- set by existing ``rte_bsf32`` function.
+* eal: The function ``rte_eal_remote_launch`` will return new error codes
+ after read or write error on the pipe, instead of calling ``rte_panic``.
+
+* eal: the ``rte_mem_config`` struct will be made private to remove it from the
+ externally visible ABI and allow it to be updated in the future.
* eal: both declaring and identifying devices will be streamlined in v18.11.
New functions will appear to query a specific port from buses, classes of
+ ``rte_eal_devargs_type_count``
+* vfio: removal of ``rte_vfio_dma_map`` and ``rte_vfio_dma_unmap`` APIs which
+ have been replaced with ``rte_dev_dma_map`` and ``rte_dev_dma_unmap``
+ functions. The due date for the removal targets DPDK 20.02.
+
* pci: Several exposed functions are misnamed.
The following functions are deprecated starting from v17.11 and are replaced:
structure would be made internal (or removed if all dependencies are cleared)
in future releases.
-* mbuf: The opaque ``mbuf->hash.sched`` field will be updated to support generic
- definition in line with the ethdev TM and MTR APIs. Currently, this field
- is defined in librte_sched in a non-generic way. The new generic format
- will contain: queue ID, traffic class, color. Field size will not change.
-
-* mbuf: the macro ``RTE_MBUF_INDIRECT()`` will be removed in v18.08 or later and
- replaced with ``RTE_MBUF_CLONED()`` which is already added in v18.05. As
- ``EXT_ATTACHED_MBUF`` is newly introduced in v18.05, ``RTE_MBUF_INDIRECT()``
- can no longer be mutually exclusive with ``RTE_MBUF_DIRECT()`` if the new
- experimental API ``rte_pktmbuf_attach_extbuf()`` is used. Removal of the macro
- is to fix this semantic inconsistency.
-
* ethdev: the legacy filter API, including
``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
as filter types MACVLAN, ETHERTYPE, FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR,
Target release for removal of the legacy API will be defined once most
PMDs have switched to rte_flow.
-* ethdev: Maximum and minimum MTU values vary between hardware devices. In
- hardware agnostic DPDK applications access to such information would allow
- a more accurate way of validating and setting supported MTU values on a per
- device basis rather than using a defined default for all devices. To
- resolve this, the following members will be added to ``rte_eth_dev_info``.
- Note: these can be added to fit a hole in the existing structure for amd64
- but not for 32-bit, as such ABI change will occur as size of the structure
- will increase.
+* kni: remove KNI ethtool support. To clarify, this is not to remove the KNI,
+ but only to remove ethtool support of it that is disabled by default and
+ can be enabled via ``CONFIG_RTE_KNI_KMOD_ETHTOOL`` config option.
+ Existing KNI ethtool implementation is only supported by ``igb`` & ``ixgbe``
+ drivers, by using a copy of kernel drivers in DPDK. This model cannot be
+ extended to all drivers in DPDK and it is too much effort to maintain
+ kernel modules in DPDK. As a result users won't be able to use ``ethtool``
+ via ``igb`` & ``ixgbe`` anymore.
+
+* cryptodev: New member in ``rte_cryptodev_config`` to allow applications to
+ disable features supported by the crypto device. Only the following features
+ would be allowed to be disabled this way,
+
+ - ``RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO``
+ - ``RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO``
+ - ``RTE_CRYPTODEV_FF_SECURITY``
+
+ Disabling unused features would facilitate efficient usage of HW/SW offload.
+
+ - Member ``uint64_t ff_disable`` in ``rte_cryptodev_config``
+
+ The field would be added in v19.08.
+
+* cryptodev: the ``uint8_t *data`` member of ``key`` structure in the xforms
+ structure (``rte_crypto_cipher_xform``, ``rte_crypto_auth_xform``, and
+ ``rte_crypto_aead_xform``) will be changed to ``const uint8_t *data``.
+
+* cryptodev: support for using IV with all sizes is added, J0 still can
+ be used but only when IV length in following structs ``rte_crypto_auth_xform``,
+ ``rte_crypto_aead_xform`` is set to zero. When IV length is greater or equal
+ to one it means it represents IV, when is set to zero it means J0 is used
+ directly, in this case 16 bytes of J0 need to be passed.
- - Member ``uint16_t min_mtu`` the minimum MTU allowed.
- - Member ``uint16_t max_mtu`` the maximum MTU allowed.
+* sched: To allow more traffic classes, flexible mapping of pipe queues to
+ traffic classes, and subport level configuration of pipes and queues
+ changes will be made to macros, data structures and API functions defined
+ in "rte_sched.h". These changes are aligned to improvements suggested in the
+ RFC https://mails.dpdk.org/archives/dev/2018-November/120035.html.
-* pdump: As we changed to use generic IPC, some changes in APIs and structure
- are expected in subsequent release.
+* metrics: The function ``rte_metrics_init`` will have a non-void return
+ in order to notify errors instead of calling ``rte_exit``.
- - ``rte_pdump_set_socket_dir`` will be removed;
- - The parameter, ``path``, of ``rte_pdump_init`` will be removed;
- - The enum ``rte_pdump_socktype`` will be removed.
+* power: ``rte_power_set_env`` function will no longer return 0 on attempt
+ to set new power environment if power environment was already initialized.
+ In this case the function will return -1 unless the environment is unset first
+ (using ``rte_power_unset_env``). Other function usage scenarios will not change.
git.droids-corp.org / dpdk.git / blobdiff