#include <errno.h>
#include <linux/if_link.h>
#include <linux/rtnetlink.h>
+#include <linux/genetlink.h>
#include <net/if.h>
#include <rdma/rdma_netlink.h>
#include <stdbool.h>
#include "mlx5_nl.h"
#include "mlx5_common_utils.h"
+#ifdef HAVE_DEVLINK
+#include <linux/devlink.h>
+#endif
+
/* Size of the buffer to receive kernel messages */
#define MLX5_NL_BUF_SIZE (32 * 1024)
#define IFLA_PHYS_PORT_NAME 38
#endif
+/*
+ * Some Devlink defines may be missed in old kernel versions,
+ * adjust used defines.
+ */
+#ifndef DEVLINK_GENL_NAME
+#define DEVLINK_GENL_NAME "devlink"
+#endif
+#ifndef DEVLINK_GENL_VERSION
+#define DEVLINK_GENL_VERSION 1
+#endif
+#ifndef DEVLINK_ATTR_BUS_NAME
+#define DEVLINK_ATTR_BUS_NAME 1
+#endif
+#ifndef DEVLINK_ATTR_DEV_NAME
+#define DEVLINK_ATTR_DEV_NAME 2
+#endif
+#ifndef DEVLINK_ATTR_PARAM
+#define DEVLINK_ATTR_PARAM 80
+#endif
+#ifndef DEVLINK_ATTR_PARAM_NAME
+#define DEVLINK_ATTR_PARAM_NAME 81
+#endif
+#ifndef DEVLINK_ATTR_PARAM_TYPE
+#define DEVLINK_ATTR_PARAM_TYPE 83
+#endif
+#ifndef DEVLINK_ATTR_PARAM_VALUES_LIST
+#define DEVLINK_ATTR_PARAM_VALUES_LIST 84
+#endif
+#ifndef DEVLINK_ATTR_PARAM_VALUE
+#define DEVLINK_ATTR_PARAM_VALUE 85
+#endif
+#ifndef DEVLINK_ATTR_PARAM_VALUE_DATA
+#define DEVLINK_ATTR_PARAM_VALUE_DATA 86
+#endif
+#ifndef DEVLINK_ATTR_PARAM_VALUE_CMODE
+#define DEVLINK_ATTR_PARAM_VALUE_CMODE 87
+#endif
+#ifndef DEVLINK_PARAM_CMODE_DRIVERINIT
+#define DEVLINK_PARAM_CMODE_DRIVERINIT 1
+#endif
+#ifndef DEVLINK_CMD_RELOAD
+#define DEVLINK_CMD_RELOAD 37
+#endif
+#ifndef DEVLINK_CMD_PARAM_GET
+#define DEVLINK_CMD_PARAM_GET 38
+#endif
+#ifndef DEVLINK_CMD_PARAM_SET
+#define DEVLINK_CMD_PARAM_SET 39
+#endif
+#ifndef NLA_FLAG
+#define NLA_FLAG 6
+#endif
+
/* Add/remove MAC address through Netlink */
struct mlx5_nl_mac_addr {
struct rte_ether_addr (*mac)[];
struct nlattr *nla = nl_msg_tail(nlh);
nla->nla_type = type;
- nla->nla_len = NLMSG_ALIGN(sizeof(struct nlattr) + alen);
- nlh->nlmsg_len = NLMSG_ALIGN(nlh->nlmsg_len) + nla->nla_len;
+ nla->nla_len = NLMSG_ALIGN(sizeof(struct nlattr)) + alen;
+ nlh->nlmsg_len += NLMSG_ALIGN(nla->nla_len);
if (alen)
memcpy((uint8_t *)nla + sizeof(struct nlattr), data, alen);
}
return ret;
}
+
+/**
+ * Parse Netlink message to retrieve the general family ID.
+ *
+ * @param nh
+ * Pointer to Netlink Message Header.
+ * @param arg
+ * PMD data register with this callback.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_family_id_cb(struct nlmsghdr *nh, void *arg)
+{
+
+ struct nlattr *tail = RTE_PTR_ADD(nh, nh->nlmsg_len);
+ struct nlattr *nla = RTE_PTR_ADD(nh, NLMSG_ALIGN(sizeof(*nh)) +
+ NLMSG_ALIGN(sizeof(struct genlmsghdr)));
+
+ for (; nla->nla_len && nla < tail;
+ nla = RTE_PTR_ADD(nla, NLMSG_ALIGN(nla->nla_len))) {
+ if (nla->nla_type == CTRL_ATTR_FAMILY_ID) {
+ *(uint16_t *)arg = *(uint16_t *)(nla + 1);
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+#define MLX5_NL_MAX_ATTR_SIZE 100
+/**
+ * Get generic netlink family ID.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] name
+ * The family name.
+ *
+ * @return
+ * ID >= 0 on success and @p enable is updated, a negative errno value
+ * otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_generic_family_id_get(int nlsk_fd, const char *name)
+{
+ struct nlmsghdr *nlh;
+ struct genlmsghdr *genl;
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int name_size = strlen(name) + 1;
+ int ret;
+ uint16_t id = -1;
+ uint8_t buf[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+ NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+ NLMSG_ALIGN(sizeof(struct nlattr)) +
+ NLMSG_ALIGN(MLX5_NL_MAX_ATTR_SIZE)];
+
+ memset(buf, 0, sizeof(buf));
+ nlh = (struct nlmsghdr *)buf;
+ nlh->nlmsg_len = sizeof(struct nlmsghdr);
+ nlh->nlmsg_type = GENL_ID_CTRL;
+ nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+ genl = (struct genlmsghdr *)nl_msg_tail(nlh);
+ nlh->nlmsg_len += sizeof(struct genlmsghdr);
+ genl->cmd = CTRL_CMD_GETFAMILY;
+ genl->version = 1;
+ nl_attr_put(nlh, CTRL_ATTR_FAMILY_NAME, name, name_size);
+ ret = mlx5_nl_send(nlsk_fd, nlh, sn);
+ if (ret >= 0)
+ ret = mlx5_nl_recv(nlsk_fd, sn, mlx5_nl_family_id_cb, &id);
+ if (ret < 0) {
+ DRV_LOG(DEBUG, "Failed to get Netlink %s family ID: %d.", name,
+ ret);
+ return ret;
+ }
+ DRV_LOG(DEBUG, "Netlink \"%s\" family ID is %u.", name, id);
+ return (int)id;
+}
+
+/**
+ * Get Devlink family ID.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ *
+ * @return
+ * ID >= 0 on success and @p enable is updated, a negative errno value
+ * otherwise and rte_errno is set.
+ */
+
+int
+mlx5_nl_devlink_family_id_get(int nlsk_fd)
+{
+ return mlx5_nl_generic_family_id_get(nlsk_fd, DEVLINK_GENL_NAME);
+}
+
+/**
+ * Parse Netlink message to retrieve the ROCE enable status.
+ *
+ * @param nh
+ * Pointer to Netlink Message Header.
+ * @param arg
+ * PMD data register with this callback.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_roce_cb(struct nlmsghdr *nh, void *arg)
+{
+
+ int ret = -EINVAL;
+ int *enable = arg;
+ struct nlattr *tail = RTE_PTR_ADD(nh, nh->nlmsg_len);
+ struct nlattr *nla = RTE_PTR_ADD(nh, NLMSG_ALIGN(sizeof(*nh)) +
+ NLMSG_ALIGN(sizeof(struct genlmsghdr)));
+
+ while (nla->nla_len && nla < tail) {
+ switch (nla->nla_type) {
+ /* Expected nested attributes case. */
+ case DEVLINK_ATTR_PARAM:
+ case DEVLINK_ATTR_PARAM_VALUES_LIST:
+ case DEVLINK_ATTR_PARAM_VALUE:
+ ret = 0;
+ nla += 1;
+ break;
+ case DEVLINK_ATTR_PARAM_VALUE_DATA:
+ *enable = 1;
+ return 0;
+ default:
+ nla = RTE_PTR_ADD(nla, NLMSG_ALIGN(nla->nla_len));
+ }
+ }
+ *enable = 0;
+ return ret;
+}
+
+/**
+ * Get ROCE enable status through Netlink.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] family_id
+ * the Devlink family ID.
+ * @param pci_addr
+ * The device PCI address.
+ * @param[out] enable
+ * Where to store the enable status.
+ *
+ * @return
+ * 0 on success and @p enable is updated, a negative errno value otherwise
+ * and rte_errno is set.
+ */
+int
+mlx5_nl_enable_roce_get(int nlsk_fd, int family_id, const char *pci_addr,
+ int *enable)
+{
+ struct nlmsghdr *nlh;
+ struct genlmsghdr *genl;
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+ int cur_en;
+ uint8_t buf[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+ NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+ NLMSG_ALIGN(sizeof(struct nlattr)) * 4 +
+ NLMSG_ALIGN(MLX5_NL_MAX_ATTR_SIZE) * 4];
+
+ memset(buf, 0, sizeof(buf));
+ nlh = (struct nlmsghdr *)buf;
+ nlh->nlmsg_len = sizeof(struct nlmsghdr);
+ nlh->nlmsg_type = family_id;
+ nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+ genl = (struct genlmsghdr *)nl_msg_tail(nlh);
+ nlh->nlmsg_len += sizeof(struct genlmsghdr);
+ genl->cmd = DEVLINK_CMD_PARAM_GET;
+ genl->version = DEVLINK_GENL_VERSION;
+ nl_attr_put(nlh, DEVLINK_ATTR_BUS_NAME, "pci", 4);
+ nl_attr_put(nlh, DEVLINK_ATTR_DEV_NAME, pci_addr, strlen(pci_addr) + 1);
+ nl_attr_put(nlh, DEVLINK_ATTR_PARAM_NAME, "enable_roce", 12);
+ ret = mlx5_nl_send(nlsk_fd, nlh, sn);
+ if (ret >= 0)
+ ret = mlx5_nl_recv(nlsk_fd, sn, mlx5_nl_roce_cb, &cur_en);
+ if (ret < 0) {
+ DRV_LOG(DEBUG, "Failed to get ROCE enable on device %s: %d.",
+ pci_addr, ret);
+ return ret;
+ }
+ *enable = cur_en;
+ DRV_LOG(DEBUG, "ROCE is %sabled for device \"%s\".",
+ cur_en ? "en" : "dis", pci_addr);
+ return ret;
+}
+
+/**
+ * Reload mlx5 device kernel driver through Netlink.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] family_id
+ * the Devlink family ID.
+ * @param pci_addr
+ * The device PCI address.
+ * @param[out] enable
+ * The enable status to set.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_driver_reload(int nlsk_fd, int family_id, const char *pci_addr)
+{
+ struct nlmsghdr *nlh;
+ struct genlmsghdr *genl;
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+ uint8_t buf[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+ NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+ NLMSG_ALIGN(sizeof(struct nlattr)) * 2 +
+ NLMSG_ALIGN(MLX5_NL_MAX_ATTR_SIZE) * 2];
+
+ memset(buf, 0, sizeof(buf));
+ nlh = (struct nlmsghdr *)buf;
+ nlh->nlmsg_len = sizeof(struct nlmsghdr);
+ nlh->nlmsg_type = family_id;
+ nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+ genl = (struct genlmsghdr *)nl_msg_tail(nlh);
+ nlh->nlmsg_len += sizeof(struct genlmsghdr);
+ genl->cmd = DEVLINK_CMD_RELOAD;
+ genl->version = DEVLINK_GENL_VERSION;
+ nl_attr_put(nlh, DEVLINK_ATTR_BUS_NAME, "pci", 4);
+ nl_attr_put(nlh, DEVLINK_ATTR_DEV_NAME, pci_addr, strlen(pci_addr) + 1);
+ ret = mlx5_nl_send(nlsk_fd, nlh, sn);
+ if (ret >= 0)
+ ret = mlx5_nl_recv(nlsk_fd, sn, NULL, NULL);
+ if (ret < 0) {
+ DRV_LOG(DEBUG, "Failed to reload %s device by Netlink - %d",
+ pci_addr, ret);
+ return ret;
+ }
+ DRV_LOG(DEBUG, "Device \"%s\" was reloaded by Netlink successfully.",
+ pci_addr);
+ return 0;
+}
+
+/**
+ * Set ROCE enable status through Netlink.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] family_id
+ * the Devlink family ID.
+ * @param pci_addr
+ * The device PCI address.
+ * @param[out] enable
+ * The enable status to set.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_enable_roce_set(int nlsk_fd, int family_id, const char *pci_addr,
+ int enable)
+{
+ struct nlmsghdr *nlh;
+ struct genlmsghdr *genl;
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+ uint8_t buf[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+ NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+ NLMSG_ALIGN(sizeof(struct nlattr)) * 6 +
+ NLMSG_ALIGN(MLX5_NL_MAX_ATTR_SIZE) * 6];
+ uint8_t cmode = DEVLINK_PARAM_CMODE_DRIVERINIT;
+ uint8_t ptype = NLA_FLAG;
+;
+
+ memset(buf, 0, sizeof(buf));
+ nlh = (struct nlmsghdr *)buf;
+ nlh->nlmsg_len = sizeof(struct nlmsghdr);
+ nlh->nlmsg_type = family_id;
+ nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+ genl = (struct genlmsghdr *)nl_msg_tail(nlh);
+ nlh->nlmsg_len += sizeof(struct genlmsghdr);
+ genl->cmd = DEVLINK_CMD_PARAM_SET;
+ genl->version = DEVLINK_GENL_VERSION;
+ nl_attr_put(nlh, DEVLINK_ATTR_BUS_NAME, "pci", 4);
+ nl_attr_put(nlh, DEVLINK_ATTR_DEV_NAME, pci_addr, strlen(pci_addr) + 1);
+ nl_attr_put(nlh, DEVLINK_ATTR_PARAM_NAME, "enable_roce", 12);
+ nl_attr_put(nlh, DEVLINK_ATTR_PARAM_VALUE_CMODE, &cmode, sizeof(cmode));
+ nl_attr_put(nlh, DEVLINK_ATTR_PARAM_TYPE, &ptype, sizeof(ptype));
+ if (enable)
+ nl_attr_put(nlh, DEVLINK_ATTR_PARAM_VALUE_DATA, NULL, 0);
+ ret = mlx5_nl_send(nlsk_fd, nlh, sn);
+ if (ret >= 0)
+ ret = mlx5_nl_recv(nlsk_fd, sn, NULL, NULL);
+ if (ret < 0) {
+ DRV_LOG(DEBUG, "Failed to %sable ROCE for device %s by Netlink:"
+ " %d.", enable ? "en" : "dis", pci_addr, ret);
+ return ret;
+ }
+ DRV_LOG(DEBUG, "Device %s ROCE was %sabled by Netlink successfully.",
+ pci_addr, enable ? "en" : "dis");
+ /* Now, need to reload the driver. */
+ return mlx5_nl_driver_reload(nlsk_fd, family_id, pci_addr);
+}
git.droids-corp.org / dpdk.git / blobdiff